检索结果-内蒙古大学图书馆

conference on current developments in lens design and optical engineering XVIII

作者： Qiu, RongSheng Wu, JianDong Chen, LongJiang Yu, Kun Pang, HaoJun Hu, BaiZhen Shanghai Aerosp Control Technol Inst 1555 ZhongChun Rd Shanghai 201109 Peoples R China

ISBN: (纸本)9781510612082;9781510612075

We designed a compact middle-wave infrared (MWIR) lens with a large focal length ratio ( about 1.5:1), used in the 3.7 to 4.8 mu m range. The lens is consisted of a compact front group and a re-imaging group. Thanks to the compact front group configuration, it is possible to install a filter wheel mechanism in such a tight space. The total track length of the lens is about 50mm, which includes a 2mm thick protective window and a cold shield of 12mm. The full field of view of the lens is about 3.6 degrees, and F number is less than 1.6, the image circle is about 4.6mm in diameter. The design performance of the lens reaches diffraction limitation, and doesn't change a lot during a temperature range of -40 degrees C+60 degrees C This essay proposed a stepwise design method of infrared optical system guided by the qualitative approach. The method fully utilize the powerful global optimization ability, with a little effort to write code snippet in optical design software, frees optical engineer from tedious calculation of the original structure.

关键词： infrared optical system lens design athermalization filter wheel multispectral sensing

来源：评论

学校读者我要写书评

暂无评论

Gain in optical Coatings

Gain in Optical Coatings

引用

conference on current developments in lens design and optical engineering XIII

作者： Macleod, Angus Clark, Christopher Thin Film Ctr Inc Tucson AZ 85716 USA

ISBN: (纸本)9780819492036

The introduction of gain into an optical medium is most easily accomplished by reversing the sign of the extinction coefficient. The theoretical expression for reflectance at a simple boundary between a dielectric, lossless incident medium and a medium with a finite extinction coefficient, however, takes no account of the sign of the extinction coefficient In such an arrangement, therefore, can the presence of gain possibly result in an enhanced reflectance? Opinions in the literature differ but tend to find enhancement beyond the critical angle and none below. This study examines both cases and shows that all results are in fact correct but they are not necessarily stable and it is their stability, or lack of it, that leads to the different results.

关键词： Gain in optical coatings optical coating theory admittance loci with gain

来源：评论

学校读者我要写书评

暂无评论

Practical guide to saddle-point construction in lens design

Practical guide to saddle-point construction in lens design

引用

conference on current developments in lens design and optical engineering VIII

作者： Bociort, Florian van Turnhout, Maarten Marinescu, Oana Delft Univ Technol Opt Res Grp Lorentzweg 1 NL-2628 CJ Delft Netherlands

ISBN: (纸本)9780819468154

Saddle-point construction (SPC) is a new method to insert lenses into an existing design. With SPC, by inserting and extracting, lenses new system shapes can be obtained very rapidly, and we believe that, if added to the optical designer's arsenal, this new tool can significantly increase design productivity in certain situations. Despite the fact that the theory behind SPC contains mathematical concepts that are still unfamiliar to many optical designers, the practical implementation of the method is actually very easy and the method can be fully integrated with all other traditional design tools. In this work we will illustrate the use of SPC with examples that are very simple and illustrate the essence of the method. The method can be used essentially in the same way even for very complex systems with a large number of variables, in situations where other methods for obtaining new system shapes do not work so well.

关键词： optical system design optimization saddle points

来源：评论

学校读者我要写书评

暂无评论

optical state estimation using wavefront data

Optical state estimation using wavefront data

引用

conference on current developments in lens design and optical engineering V

作者： Redding, D Sigrist, N Lou, JZ Zhang, Y Atcheson, P Acton, S Hayden, W CALTECH Jet Prop Lab Pasadena CA 91109 USA

ISBN: (纸本)0819454613

The use of wavefront measurements to deduce the state of multiple optics in a telescope beam train - their misalignments and figure errors - can be confused by the fact that there are multiple potential sources for the same measured error. This talk applies Kalman filtering techniques as a tool for separating true telescope errors from artifactual testing errors in the alignment and testing of NASA's James Webb Space Telescope, a large segmented-aperture cryogenic telescope to be launched after 2010.

关键词： optical testing segmented mirror space telescope. wavefront control wavefront sensing state estimation

来源：评论

学校读者我要写书评

暂无评论

Scene-based sensor modeling using optical design software

Scene-based sensor modeling using optical design software

引用

conference on current developments in lens design and optical engineering VIII

作者： Fisher, John Brandywine Opt Inc Chester PA USA

ISBN: (纸本)9780819468154

The traditional approach to optical system engineering separates the scene, optics, and detector as static entities, optimizing the design to meet subsystem specifications of aperture, field size, encircled energy, read noise, dynamic range, and other electro-optical properties. The Scene-Based Sensor Model (SBSM) represents a different approach by simulating the scene, optics and detector as a cohesive model using commercially available optical ray-tracing software. The objects are modeled as temporally changing entities, with characteristics including reflectance, absorbance, fluorescence, and scattering. Likewise, the detectors are modeled with their properties of temporal noise, spatial non-uniformity, nonlinear gain, and offset drift. The end-to-end simulation produces "photons-to-bits" analysis applicable to a variety of optical systems. First results are illustrated with ray tracing simulation of moving fluorescent objects and laser induced breakdown spectroscopy.

关键词： optical system design ray-tracing simulation sensor model FRED optical design software Matlab

来源：评论

学校读者我要写书评

暂无评论

Achrotech: achromat cost versus performance for conventional, diffractive and GRIN components 17

Achrotech: achromat cost versus performance for conventional...

引用

conference on current developments in lens design and optical engineering XVII

作者： Morris, Jeffrey Wolf, Greg Vandendriessche, Stefaan Sparrold, Scott Edmund Opt 6464 E Grant Rd Tucson AZ 85711 USA Edmund Opt 101 East Gloucester Pike Barrington NJ 08007 USA

ISBN: (数字)9781510602861

ISBN: (纸本)9781510602854;9781510602861

An achromatic component shares a common focus at two wavelengths and is a commonly used device in optical assemblies. This work explores the cost versus performance tradeoff for several types of achromatic lenses: conventional doublets with homogenous glass elements, hybrid doublets with a diffractive surface, axial GRadient INdex (GRIN) lenses (where the index of refraction changes along the length of the lens), and radial GRIN lenses (where the index of refraction changes depending on radial position). First order achromatic principles will be reviewed and applied to each system as a starting point and refined through the use of ray trace software. optical performance will be assessed in terms of focusing efficiency and imaging. Cost will then be evaluated by accounting for current manufacturing costs and retail price through several distributors.

关键词： achromat GRIN lens diffractive lens axial color longitudinal color spherochromatism lens design

来源：评论

学校读者我要写书评

暂无评论

Linear wavelength spectrometer

Linear wavelength spectrometer

引用

conference on current developments in lens design and optical engineering II

作者： Thibault, S INO Opt Engn Div St Foy PQ G1P 4S4 Canada

ISBN: (纸本)0819441554

Generally, a spectrometer uses a diffraction grating to spread the spectral components of a light incident on the diffraction grating on a one-dimensional detector. The detector is composed of pixels linearly distributed along a line. However, the diffracted light is not spread linearly on the detector which means that the Wavelength on pixel I is not linearly correlated with the wavelength on pixel 2. The resolution is therefore not constant for all the spectral range of the spectrometer. To know which pixel corresponds to which wavelength, a nonlinear calibration process must be applied to get a linear relation between the diffracted light position and the wavelength of this light. The new spectrometer that we present uses a special lens configuration name F-sin(theta) lens to provide a linear relation in the image plane between the pixel position and the wavelength of the light. The f-sin(theta) characteristic is defined as the difference in percent between the design position of the wavelength in the image plane and its ideal position, if the lens is perfect. The characteristic of the lens used in the spectrometer is better than 0.1%. The concept can also be used for WDM and DWDM applications.

关键词： spectrometer WDM DWDM distortion optical design guided optics

来源：评论

学校读者我要写书评

暂无评论

Balancing detector effects with aberrations in the design of wide-field grazing incidence x-ray telescopes

引用

optical engineering 2006年第6期45卷 063003-1-063003页

作者： Harvey, James E. Atanassova, Martina Krywonos, Andrey Univ Cent Florida CREOL Orlando FL 32826 USA

Most imaging systems today include a mosaic detector array in the focal plane. optical designers of astronomical telescopes typically produce a design that yields a superb on-axis aerial image in the focal plane, and detector effects are included only in the analysis of the final system performance. Aplanatic optical designs (corrected for spherical aberration and coma) are widely considered to be superior to nonaplanatic designs. However, there is little merit in an aplanatic design for wide-field applications because one needs to optimize some field-weighted-average measure of resolution over the desired operational field of view (OFOV). Furthermore, when used with a mosaic detector array in the focal plane, detector effects eliminate the advantage of the aplanatic design even at small field angles. For wide fields of view, the focal plane is frequently despaced to balance field curvature with defocus thus obtaining better overall performance. We will demonstrate that including detector effects in the optical design process results in a different optimal (nonaplanatic) design for each OFOV that is even superior to an optimally despaced aplanatic design. (c) 2006 Society of Photo-optical Instrumentation Engineers.

关键词： detector effects wide-field imaging systems grazing incidence x-ray telescopes

来源：评论

学校读者我要写书评

暂无评论

Method for designing optical systems from the off-the-shelf optical components 23

Method for designing optical systems from the off-the-shelf ...

引用

conference on current developments in lens design and optical engineering xxIII Part of SPIE Optics and Photonics conference

作者： Ryzhikov, Lev 136 Newtown Ave Unit 7 Norwalk CT 06851 USA

ISBN: (纸本)9781510654198;9781510654181

Several off-the-shelf optical lenses and lens components are available for use in the design of new optical systems. But there isn't a clear methodology on how effective there can be in a real optical device. It should be noted that the use of standard optical elements reduces the cost of the optical device, which is especially important for mass production. Ease and speed of replacement are also important parameters for the usability of standard optical elements. That is why the extensive use of purchased optical elements in optical devices will simplify their operation and improve the convenience of maintenance. Selecting purchased optical components of an optical circuit is not an easy task and requires certain skills. The main problem is that the optical design stage is divided into two parts. The first part is the creation of an optical circuit from non-standard (custom) optical components with optical characteristics close to cataloging lenses. The second part is to adjust the position of the optical component to satisfy specification requirements. This process sometimes required several iterations. For the process of fitting distances in an optical system to be successful, it is necessary to take into account the properties of optical glasses such as refractive index and dispersion when choosing lens components, in addition to their focal lengths and geometrical dimensions. It should be noted that in the catalogs of optical components there are optical parameters of lenses, and also glass parameters of the lens. This is essential information for lens designers to substitution the custom optical element for the off-the-shelf lens. Problems that arise with such a replacement are based on a limited number of standard lenses and lens components. To get comfortable for replacement, the custom lenses components must be modified (adjusted) so that optical parameters will be close enough to the parameters of the catalog lenses other words during the custom lenses opt

关键词： optical components lenses Glasses optical design Relays Head Aberration correction lens design Refractive index Tolerancing

来源：评论

学校读者我要写书评

暂无评论

design of an in-vivo microscope to characterize cataracts in human eyes 6

Design of an in-vivo microscope to characterize cataracts in...

引用

current developments in optical design and engineering VI conference

作者： Feng, C Ahmad, A Univ. of Alabama in Huntsville (United States)

ISBN: (纸本)0819422517

The design of a compact contact microscope, which can be used in-vivo to study the cataracts in human eyes is presented. This microscope has the capability to evaluate the changes in the optical density within the eye lens itself, and thus enabling an examiner to ascertain the progression of a cataractous change or at least the optical changes associated with cataractous development. The microscope has a variable focal length so it can be focused at any depth through the entire thickness of the eye lens. A separate small objective lens is spring loaded against the cornea (like a tonometer tip) so that the natural eye movements can occur safely during the examination. The distance between the objective lens and rest of the optics is variable to accommodate the movements of the eye due to pulse or breathing without affecting the image quality of the instrument. The layer by layer images can be captured on a CCD camera and stored in the computer. The reconstruction software can quantitatively display the characteristics of the cataracts, such as the location, size, and density. The optical design and performance results for the microscope are presented. The optomechanical design features of the microscope are also discussed.

关键词： in-vivo microscope contact microscope eye diseases cataracts CCD imaging

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：