检索结果-内蒙古大学图书馆

19th Conference on current developments in Lens design and optical engineering

作者： Romanova, Galina E. Rodionova (Butylkina), Kseniia D. ITMO Univ 49 Kronverkskiy Pr St Petersburg 197101 Russia

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

Nowadays, the development of the space apparatus with high optical characteristics still stays the important task. The simplest systems which can provide the required characteristics for remote monitoring from the space are the three-mirror systems. It can be shown that in many cases, classical three-mirror systems have critical value of obscuration that leads to decreasing of resolution. Using off-axis field of view in the systems provides the way to avoid the obscuration influence. We present a technique for designing the three-mirror telescope objectives based on the systems with axial symmetry with an off-axis field of view.

关键词： mirror telescopes off-axis field of view optical design

来源：评论

学校读者我要写书评

暂无评论

Simulation of Multi-Channel Microlens Array for Image Stitching 19

Simulation of Multi-Channel Microlens Array for Image Stitch...

引用

19th Conference on current developments in Lens design and optical engineering

作者： Chao, Chien Su, Guo-Dung Natl Taiwan Univ Grad Inst Photon & Optoelect 1 Roosevelt RdSect 4 Taipei Taiwan

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

In this study, we propose a new micro-optical system with 1.65 zoom ratio for image stitching. The new system with four layers is based on microlenses and liquid lens arrays. In order to realize the zoom function, we design the first and the fourth layers by the liquid lens and we also set up the second and the third layers as the fixed lens to tilt the optical axes. The length of the system is 6.4 mm, the image size 8.6 x 6.6 mm(2), the field of view (FOV) 50 degrees in wide mode and the field of view 28 degrees in tele mode. The MTF and distortion are used to demonstrate the zoom function, the stitching function and the stitching with zoom function, respectively. We use the ZEMAX ray-tracing software to demonstrate the simulation of image stitching in wide and tele modes.

关键词： Image system Micro-optics optical design Array Zoom system Liquid lens system

来源：评论

学校读者我要写书评

暂无评论

optical coatings for the optical concentrator with the prism film 19

Optical coatings for the optical concentrator with the prism...

引用

19th Conference on current developments in Lens design and optical engineering

作者： Jaing, Cheng-Chung Wan, Wei-Li Yang, Pao-Keng Ying, Shang-Ping Chen, Bing-Mau Minghsin Univ Sci & Technol Dept Optoelect Syst Engn 1 Xinxing Rd Hsinchu 30401 Taiwan

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

Effects of a coating combination, a prism film and a phosphor layer on the short current of the solar cell in the optical solar concentrator and the illuminance of the sunlight passing through the samples were investigated. The optical solar concentrator was a 50 mm x 50 mm x 5 mm B270 thick glass with its sides connected by a solar cell. The prismatic structure of the prism film had a period of 50 mu m. A phosphor Y560 having an absorption band of 390 nm to 500 nm and emitting from 490 nm to 700 nm was prepared. Six coating combinations applied in this study were composed of optical filters and glass. The optical filters included infrared cut-off, magenta, red, green and blue filters. The deflection angle was between 31 and 33 degrees when the incident sunlight passed through the prism film. The short current of the solar cell in the optical solar concentrator with the prism film, the coating combination and the phosphor layer was largest in this study. Experimental results show that the coating is more suitable for enhancing the short current than the phosphor layer in the optical solar concentrator with the prism film. And the phosphor layer can increase the illuminance of the sunlight passing through the samples due to the human eye sensitivity.

关键词： optical concentrator coating prism film phosphor layer short current illuminance optical filter solar cell

来源：评论

学校读者我要写书评

暂无评论

design of an adaptive Fresnel lens using design thinking methodology and cost analysis 19

Design of an adaptive Fresnel lens using design thinking met...

引用

19th Conference on current developments in Lens design and optical engineering

作者： Santiago Alvarado, Agustin Cruz Felix, Angel S. Santiago Gomez, Stephanie L. Ruiz Zavala, Soledad Osorio Garcia, Adelita Iturbide Jimenez, Fernando Univ Tecnol Mixteca Carretera Acatlima Km 2-5 Huajuapan De Leon 69000 Oaxaca Mexico

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

The main characteristic of adaptive lenses is to change their shape, and consequently their focal length, by modifying their physical parameters. On the other hand, Fresnel lenses have such features as large aperture, short focal length, they are slim and reduced in size. These kind of lenses have become very popular due to their applications, such as in compound eyes, optical communication systems, photolithography, imaging systems, etc. Nowadays, several kinds of tunable lenses exist such as those made with dielectric materials, lenses that change their focal length by varying the refractive index of the material, liquid lenses composed by elastic membranes and solid elastic lenses. In this work, we present the design, simulation of the mechanical behavior using Finite Element Method (FEM) and cost analysis of an Adaptive Fresnel Lens made of an elastic material, together with a mechanical mounting system. Our study considered the use of design thinking methodology to obtain the best optical design at minimal cost. Analysis, results and future applications are presented.

关键词： Adaptive Fresnel lens design Thinking optical design

来源：评论

学校读者我要写书评

暂无评论

design of lens hoods for the "Lira-B" space telescope 19

Design of lens hoods for the "Lira-B" space telescope

引用

19th Conference on current developments in Lens design and optical engineering

作者： Muratov, Artem Olyunin, Vyacheslav Bacholdin, Alexey Voznesenskaya, Anna ITMO Univ 49 Kronverksky Av St Petersburg 197101 Russia

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

The space investigation project "Lira-B" is purposed to perform a high-precision multicolor photometric all-sky survey of objects from 3 to 16 m. This investigation concludes in multiple photometric measurements in ten spectral bands from 200 to 1000 nm. Such telescope systems should provide maximum light gathering and meet stray light requirements. The main goal of the given work is optical design of the telescope system with lens hoods protecting against the parasitic illumination. Analysis of impact of the lens hoods' surface structure and coatings on the image quality is performed and ways to reduce the stray light in the system. The modeling is carried out using Zemax OpticStudio software in the non-sequential mode.

关键词： Lira-B Zemax lens hood telescopic system

来源：评论

学校读者我要写书评

暂无评论

The design of the Prism Film on the optical Concentrator for Photovoltaic Applications 19

The Design of the Prism Film on the Optical Concentrator for...

引用

19th Conference on current developments in Lens design and optical engineering

作者： Ying, Shang-Ping Chen, Bing-Mau Yang, Pao-Keng Jaing, Cheng-Chung Minghsin Univ Sci & Technol Dept Optoelect Syst Engn 1 Xinxing Rd Hsinchu 30401 Taiwan

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

As an application of the PV technology, building integrated photovoltaic (BIPV) technologies have attracted an increasing interest in the past decade. One of these BIPV elements is the luminescent solar concentrators (LSCs). The LSC consists of a transparent plate embedded with luminescent dyes or inorganic particles, and the solar cells are attached on one or more sides. The incoming sunlight absorbed by the luminescent dyes or inorganic particles re-emits at a longer wavelength, and part of the re-emitting light trapped in the transparent plate reaches the PV cell attached on the LSC and convert it to electricity. However, the efficiency of the LSCs is still low at this stage. The surface loss on the top surface of the transparent plate is one of the main losses in LSCs. The prism film in liquid-crystal display (LCD) module is used to collimate the light in the module and enhance the overall brightness, and would be used in the LSCs to enhance the incoming sunlight to the solar cells attached on the end of the transparent plate. Then the design of the prism film is important. In this study, the ray-tracing simulation is used to investigate the optical characteristics of the LSC with the prism film covered on the top surface of the transparent plate. Different structure of the prism film will be considered to enhance the light reaches the PV cell attached on the LSC.

关键词： Prism film optical design optical Concentrator

来源：评论

学校读者我要写书评

暂无评论

Integrated multi-objective optimisation of the support structure of heliostats in concentrated solar power plants using a genetic algorithm

引用

IOP Conference Series: Materials Science and engineering 2022年第1期1214卷

作者： L Lomazzi F Cadini M Giglio C Cancro G Ciniglio G Graditi A Pontecorvo Politecnico di Milano Department of Mechanical Engineering Via La Masa n.1 Milan Italy Italian National Agency for New Technologies Energy and Sustainable Economic Development ENEA – Research Center Piazza E. Fermi 1 80055 Portici (NA) Italy

The optimisation of the support structure of heliostats in concentrating solar power plants is a fundamental task aimed at attempting to reduce the high levelised cost of energy (LCOE) of current configurations. In this work, an integrated multi-objective optimisation framework is presented, which relies on the combination of a lean and fast structural model with a genetic algorithm to simultaneously minimise both the overall mass of the support structure and the mean angle of rotation of the mirror surface, which directly affects the optical efficiency of the component. A particular feature of the proposed framework is that it represents an integrated solution, i.e., it allows to simultaneously optimise the main components of the heliostat support structure, i.e., the pedestal, the truss and the back support structure, assuming they are off-the-shelf components easily available on the market. The optimisation problem is set up selecting as design variables (i) the number of elements in the back support structure and (ii) the relevant characteristics of all the components considered, i.e., section shape and dimensions, according to the components commercial datasheets. At each iteration of the optimisation process, the structural model is fed with the current design variables values and, according to some computed aerodynamic loads, it allows evaluating the displacement and rotation of the points of interest within the mirror surface. An aerodynamic model present in the literature based on experimental wind tunnel tests is used to estimate the wind forces acting on the heliostat as a function both of the mirror inclination angle with respect to the ground and of the wind direction with respect to the mirror orientation. In this work, the proposed methodology is demonstrated on a realistic case study and the results commented in detail, highlighting possible future developments and the limitations of the framework.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Using effective medium theories to design tailored nanocomposite materials for optical systems 19

Using effective medium theories to design tailored nanocompo...

引用

19th Conference on current developments in Lens design and optical engineering

作者： Werdehausen, Daniel Staude, Isabelle Burger, Sven Petschulat, Joerg Scharf, Toralf Pertsch, Thomas Decker, Manuel Carl Zeiss Corp Res & Technol Carl Zeiss Promenade 10 D-07745 Jena Germany Friedrich Schiller Univ Jena Abbe Ctr Photon Inst Appl Phys Albert Einstein Str 15 D-07745 Jena Germany Ecole Polytech Fed Lausanne Nanophoton & Metrol Lab CH-1015 Lausanne Switzerland JCMwave GmbH Bolivaralle 22 D-14050 Berlin Germany Zuse Inst Berlin Takustr 7 D-14195 Berlin Germany Carl Zeiss SMT GmbH Semicond Mask Solut Carl Zeiss Promenade 10 D-07745 Jena Germany Fraunhofer Inst Appl Opt & Precis Engn Albert Einstein Str 7 D-07745 Jena Germany

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

Modern optical systems are subject to very restrictive performance, size and cost requirements. Especially in portable systems size often is the most important factor, which necessitates elaborate designs to achieve the desired specifications. However, current designs already operate very close to the physical limits and further progress is difficult to achieve by changing only the complexity of the design. Another way of improving the performance is to tailor the optical properties of materials specifically to the application at hand. A class of novel, customizable materials that enables the tailoring of the optical properties, and promises to overcome many of the intrinsic disadvantages of polymers, are nanocomposites. However, despite considerable past research efforts, these types of materials are largely underutilized in optical systems. To shed light into this issue we, in this paper, discuss how nanocomposites can be modeled using effective medium theories. In the second part, we then investigate the fundamental requirements that have to be fulfilled to make nanocomposites suitable for optical applications, and show that it is indeed possible to fabricate such a material using existing methods. Furthermore, we show how nanocomposites can be used to tailor the refractive index and dispersion properties towards specific applications.

关键词： Nanocomposites Nanomaterials optical materials optical design optical Systems Dispersion engineering Effective medium theory Mie theory

来源：评论

学校读者我要写书评

暂无评论

design of ergonomic handpieces for a CO₂ laser system for surgical and cosmetological applications 19

Design of ergonomic handpieces for a CO<sub>2</sub> laser sy...

引用

19th Conference on current developments in Lens design and optical engineering

作者： Zavatskaia, Kseniia Voznesenskaya, Anna ITMO Univ Dept Appl & Comp Opt St Petersburg Russia

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

The CO2 laser systems are widely used for different specialised surgery types and cosmetological procedures. The market is filled with various offers regarding the systems, however, every manufacturer supplies a very limited range of handpieces with the equipment. Thus, the work of surgeon or a medical worker is complicated by the discrepancy of a handpiece with the ergonomic/ technical requirements for a specific procedure. It may result in negative consequences of the procedure itself or a choice not in favor of laser technologies. The work presents the design of optical system and construction of specialised handpieces for CO2 laser system based on the discussion with medical workers of several hospitals that directly interact with the equipment and the technical requirements of medical procedures.

关键词： CO2 laser handpiece laser surgery optical design

来源：评论

学校读者我要写书评

暂无评论

Caustic surfaces produced by a plane wavefront refracted through cemented doublet lenses 19

Caustic surfaces produced by a plane wavefront refracted thr...

引用

19th Conference on current developments in Lens design and optical engineering

作者： Avendano-Alejo, Maximino Carmen Lopez-Bautista, M. Castaneda, Luis Univ Nacl Autonoma Mexico Inst Ciencias Aplicadas & Tecnol Apdo Postal 70-186 Mexico City 04510 DF Mexico Inst Politecn Nacl Escuela Super Med Plan San Luis & Diaz Mirson S-N Mexico City 11340 DF Mexico

ISBN: (数字)9781510620629

ISBN: (纸本)9781510620629

We study the formation of caustic surfaces produced by cemented doublet lenses, considering a plane wavefront propagating parallel to the optical axis and neglecting the refractive index of the optical cement between two simple lenses which are in contact. We have already seen that the shape of caustic surfaces can represent the monochromatic aberrations that we call image errors;furthermore the shape of the caustic can be modified by changing the parameters of design for two conic lenses in contact, in such a way that if we are able to vanish the caustic, the optical system produces either an image without spherical aberration or longitudinal chromatic aberration reduced, commonly known as spherochromatism. The shape of the caustic surface is a function of the indices of refraction involved in the process of refraction, and all the parameters of two simple lenses. We provide an analytic equation for the caustic surfaces in a meridional plane and an example is presented.

关键词： Caustic Surfaces Cemented doublet lenses optical design Principal Surfaces

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：