检索结果-内蒙古大学图书馆

5th International Conference on IoT in Social, Mobile, Analytics and Cloud (I-SMAC)

作者： Selvi, C. Thirumarai Anishviswa, N. Karthi, G. Ashok Darshan, K. Balaji, M. Gowtham Sri Krishna Coll Engn & Technol ECE Coimbatore Tamil Nadu India

ISBN: (纸本)9781665426428

This paper focuses on voice controlled car with camera, which is constructed by using major components called arduino uno, bluetooth module, motor driver circuit, camera and microsd card module. This automation provides a convenient way to control voice-controlled robot. This automation can aid people, who cannot walk. Voice Controlled car is controlled by using specific commands, which are recognized by mike with the mobile application. The mobile application recognize six commands and they are LEFT, RIGHT, FORWARD, BACK, STOP, KEEP WATCH IN ALL DIRECTION. This mobile application can be used in android or IOS cellphones. Here, the Bluetooth module is used for controlling the voice-controlled car wirelessly and utilizes MicroSD card for storing the video from the camera.

关键词： Voice controlled car arduino uno Bluetooth Automation

来源：评论

学校读者我要写书评

暂无评论

Design and Construction of an Obstacle Avoiding Robot Based on arduino Platform and Programming Tools 9

Design and Construction of an Obstacle Avoiding Robot Based ...

引用

9th Annual IEEE Ubiquitous Computing, Electronics and Mobile Communication Conference (UEMCON)

作者： Molina, Miguel Vera, Angelo Molina, Carolina Garzon, Priscila Univ Guayaquil Fac Ciencias Matemat & Fis Guayaquil Ecuador Univ Guayaquil Fac Ciencias Adm Guayaquil Ecuador Univ Guayaquil Guayaquil Ecuador

ISBN: (纸本)9781538676936

This paper presents the design and construction of a small obstacle avoiding robot based on arduino uno, a Bluetooth module and programming tools. The robot is a small mobile machine that avoids obstacles and it does so through an ultrasonic sensor that will detect the distance of the objects in front of it and make decision about its trajectory. When approaching a certain distance, the arduino uno will send a signal and with the help of a bridge H will cause the engines to turn the car and therefore avoid the obstacle. The bridge H helps the controller to turn the car whatever direction required. The evasion of obstacles is a fundamental characteristic for robot operation. With this characteristic taken care of, future robots with more complex functionality can perform its work without getting stuck in the middle due to some obstacle they have encountered along the way. Throughout the document different requirements of both hardware and software for the robot operation are explained, the proposed design is presented and finally results and conclusions are shown.

关键词： arduino uno mobile robot Bluetooth module obstacle detection

来源：评论

学校读者我要写书评

暂无评论

Development of an arduino-based CO2 Monitoring Device

Development of an Arduino-based CO2 Monitoring Device

引用

IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus)

作者： Lapshina, Polina D. Kurilova, Sofya P. Belitsky, Anton A. St Petersburg Min Univ Dept Elect Syst St Petersburg Russia

ISBN: (纸本)9781728103396

The air quality affects human health and energy. High levels of carbon dioxide in the air can cause serious ailments of a human body. Due to the increased attention to this issue, it is necessary to develop air quality control devices. The project is supposed to construct a prototype of the device for monitoring the content of carbon dioxide in indoor air. The development is based on the arduino uno microcontroller board, MH-Z19 NDIR infrared gas module, temperature and humidity module AM2302 and the LCD1602 module which is a interfaced to an I2C daughter board. The sensor control program is developed and compiled in the IDE software shell. The operating principle of the device is that it displays the data (CO2 level, temperature and humidity indoor) from the sensors on the LCD screen with a frequency of five minutes.

关键词： carbon dioxide arduino uno hardware and software tools for building automation systems and robotics carbon dioxide sensor MH-Z19 temperature and humidity sensor DHT11

来源：评论

学校读者我要写书评

暂无评论

Design of an Instrument for Measuring Heart Rate and Blood Oxygen Based on arduino

引用

JOURNAL OF ROBOTICS NETWORKING AND ARTIFICIAL LIFE 2021年第4期7卷 275-278页

作者： Dai, Fengzhi Wen, Haokang Zhao, Jichao Hao, Hongbo Zhang, Qianqian Tianjin Univ Sci & Technol Tianjin Peoples R China Tianjin Tianke Intelligent & Manufacture Technol Tianjin Peoples R China

In order to solve the problem of inconvenience of the existing heart rate and oxygen detection device, a portable heart rate oximeter is proposed in this paper. The device can detect and display the value of the heart rate, temperature and blood oxygen of the human body at any time. The instrument gets rid of the cumbersomeness of traditional medical appliances, greatly reducing the volume of the instrument and making it easier to carry. The heart rate oxygen meter designed in this paper is intelligent and portable. It has a wide range of practical applications in theory. (C) 2020 The Authors. Published by Atlantis Press B.V.

关键词： Heart rate blood oxygen arduino uno

来源：评论

学校读者我要写书评

暂无评论

Implementation of REST Architecture in arduino Based Home Automation System

Implementation of REST Architecture in ARDUINO Based Home Au...

引用

IEEE International Conference on Innovations in Control, Communication and Information Systems (ICICCI)

作者： Garg, Shankey Ansari, Mohd. Shajid RSR Rungta Coll Engn & Technol Dept Comp Sci & Engn Kohka Kurud Rd Bhilai Chhattisgarh India

ISBN: (纸本)9781538639405

Internet of things (IOT) imagines a world where every device at any place can be connected. It creates a world where the lights can automatically turn on, door gets opened automatically on the arrival of the family member and remains locked when any stranger arrives, coffee automatically brews off when the morning alarm goes off and many more applications. Internet of things is not the internet but it could be called as the network of the devices which are connected to the internet. In this direction many research work is going on. In this paper we have proposed the details of how we can automate the home appliances using arduino and REST architecture. The result also shows how the use of arduino and REST architecture is beneficial as compared to other available resources in the field of Internet of Things.

关键词： Internet of things (IOT) REST arduino uno

来源：评论

学校读者我要写书评

暂无评论

IoT-based Cable Fault Detector with GSM and GPS Module using arduino 3

IoT-based Cable Fault Detector with GSM and GPS Module using...

引用

3rd International Conference on Innovative Mechanisms for Industry Applications, ICIMIA 2023

作者： Thilagaraj, M. Arun Francis, G. Manikandan, S. Ramaraj, Kottaimalai MVJ College of Engineering Department of Industrial Internet of Things Bengaluru India Karpagam College of Engineering Department of Electronics and Communication Engineering Tamilnadu Coimbatore India Karpagam College of Engineering Department of Electronics and Telecommunication Engineering Tamilnadu Coimbatore India Kalasalingam Academy of Research and Education Department of Electronics and Communication Engineering Tamilnadu Krishnankoil India

ISBN: (纸本)9798350343632

The use of underground pipelines is increasing due to various advantages such as reduced pipeline losses, reduced maintenance costs, and increased resistance to harsh weather conditions. The measurement of distance displayed on the Liquid Crystal Display (LCD) varies whenever a system issue arises. There exists no subterranean cable which is greater than the previous approach because cables were meant to be positioned over the level of the head for a decade ago. Negative climate conditions, Storms, snow, torrential rains, and pollutants have no impact on under-ground lines, although it can be challenging to find a problem in an under-ground cable when it happens to a line. Underground cabling systems are more common in many urban areas. It is challenging to fix this specific cable even when the issue appears at that time because it is unclear where the cable failed because the problem is not clear. The work aims to solve this problem by proposing a suitable method for the digital age. This study has proposed a novel strategy based on Internet of Things (IOT) modules, Global System for Mobile Communications (GSM) and Global Positioning System (GPS). arduino uno, a module-based technique using the Google database is employed to identify faults. In this research work, the primary component is arduino uno. Through the router, this study has established a communication hotspot. Here, each MCU was connected to a transformer, and its status is checked by using the Google database. When compared to other procedures, the proposed method is more accurate and effective. © 2023 IEEE.

关键词： arduino uno Cable fault detection Global positioning system (GPS) Global System for Mobile Communications (GSM) Google database

来源：评论

学校读者我要写书评

暂无评论

Generating Electricity from Waste Materials and Controlling by arduino and GSM Module 3

Generating Electricity from Waste Materials and Controlling ...

引用

3rd International Conference on Innovative Mechanisms for Industry Applications, ICIMIA 2023

作者： Rambabu, Kalathiripi Saketh, Jujuri Rachana, Kalwacharla Kumar, Gajula Praneeth B V Raju Institute of Technology Narsapur Department of ECE Medak502313 India

ISBN: (纸本)9798350343632

There is growing interest in new techniques for producing power from waste materials because of the rising demand for electricity on a global scale as well as the urgent need to decrease waste and lessen environmental effect. This abstract offers a summary of the idea of producing power using waste materials and emphasises the possibility as a long-term and ecologically responsible energy source. Electricity is generated through the usage of waste materials in this research work. This study demonstrates how electricity is produced from waste materials, whenever there are waste items like paper, plastic, and other etc. As soon as the burning process in the Zaar box, heat energy is observed by both the heating panel and heat sensor. Afterward, the inverter circuit turns the heat into electricity. This is a real-world concept for producing electricity using garbage and plastic. In this study, when electricity starts to be stored, the resulting supply of power is off because of using a heating sensor. However, when electricity is perfectly stored, the heating sensor activates the output power supply and the LED bulb begins to glow. At that point, the study demonstrates how electricity is generated from waste materials. Additionally, the research work anticipates an increase in temperature while the Zaar box is producing heat. So, to measure the temperature, temperature sensor is connected along with Aurdino.. In this arduino, the required code to send the message is stored. GSM module is used to send the SMSand temperature sensor is used to detect the temperature. © 2023 IEEE.

关键词： arduino uno GSM (Global System for Mobile Communication) module Heating panel Heating Sensor Temperature sensor.

来源：评论

学校读者我要写书评

暂无评论

Development of Inexpensive, Automatic, Real-Time Measurement System for On-Line Methane Content and Biogas Flowrate

引用

WASTE AND BIOMASS VALORIZATION 2022年第12期13卷 4839-4849页

作者： Yang, Shunchang Svoronos, Spyros A. Pullammanappallil, Pratap Univ Florida Dept Agr & Biol Engn Gainesville FL 32611 USA Univ Florida Dept Chem Engn Gainesville FL 32611 USA

Anaerobic digestion is widely used for waste treatment and biofuel production in the form of biogas from dedicated energy crops. Proper operation and control of anaerobic digesters require knowledge of biogas flow rate and methane composition of biogas. Methane content of biogas from an anaerobic digester was measured on-line by modifying an off-line measurement device, previously constructed by the authors, that uses a hydrocarbon sensor (MQ-4) and a pressure/temperature/humidity sensor (BME-280) integrated with an arduino uno. This modified on-line sensor was programmed to automatically measure methane composition by self-regulated introducing biogas samples and evacuating the device. It is also equipped with a function of biogas flowmeter which could calculate the cumulative biogas production over a time interval. Methane composition (v/v) could be measured every three hours. Measurements made by this device agreed within an average absolute difference of 0.81 +/- 0.58% with measurements by a gas chromatograph equipped with a thermal conductivity detector. The volumetric flow rate was directly expressed on a moisture-free basis at standard temperature and pressure. [GRAPHICS] .

关键词： Biogas Anaerobic digestion On-line methane composition arduino uno Renewable natural gas

来源：评论

学校读者我要写书评

暂无评论

Gas Leakage Detection System using arduino

Gas Leakage Detection System using Arduino

引用

2023 Intelligent Computing and Control for Engineering and Business Systems, ICCEBS 2023

作者： Saranya, S. Meenakshi, M. Meena, N. Sudha, G. Subbiah, Sankari Rajalakshmi, B. Sri Sairam Engineering College Department of Electronics and Communication Engineering Chennai India Sri Sairam Engineering College Department of Information Technology Chennai India

ISBN: (纸本)9798350394580

Gas leaks are a serious safety hazard in many different commercial, residential, and industrial contexts. A Gas Leakage Detection System is designed, utilizing an arduino uno to solve this problem. In order to monitor and identify the presence of potentially dangerous gases like methane, propane, and carbon monoxide in the environment, this system combines the skills of an arduino uno with gas sensors. The system's brain, the arduino uno, processes data from the sensors and manages the alarm system. © 2023 IEEE.

关键词： arduino uno Buzzer LCD LPG MQ-6 Gas Sensor Stepper Motor Driver

来源：评论

学校读者我要写书评

暂无评论

Generation of pulse-like and bursting-like oscillations from nonlinear systems using embedded technologies and applications to excite mechanical arms

引用

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION 2019年第Apr.期69卷 343-359页

作者： Siewe, R. Thepi Domguia, U. Simo Woafo, P. Fac Sci Lab Modelling & Simulat Engn Biomimet & Prototype Dept Phys POB 812 Yaounde Cameroon Fac Sci TWAS Res Unit Dept Phys POB 812 Yaounde Cameroon

This work considers the generation of pulse-like and bursting-like oscillations in some nonlinear dynamical systems using the microcontroller technology and their use in electromechanical systems. Using arduino uno programming language, it is seen that these special dynamical states can be easily produced in their real electrical nature. This constitutes an important and more reliable tool of producing nonlinear dynamical states. These special dynamical states are used to power electro dynamical systems. It is seen that the electronic shape features are exhibited by the mechanical arm. (C) 2018 Elsevier B.V. All rights reserved.

关键词： Microcontroller arduino uno Nonlinear dynamical systems Pulse oscillations Bursting oscillations Electromechanical systems

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：