检索结果-内蒙古大学图书馆

Development and application of a coal combustion life cycle on-line monitoring system

Energy engineering: Journal of the Association of Energy engineering 2015年第1期112卷 28-46页

作者： Liu, Haiyu Tan, Houzhang Xiong, Xiaohe Ma, Lin Miao, Yang Xu, Tongmo Taiyuan University of Technology 030024 China Xi'an Jiaotong University Xi'an710049 China Electric Power Research Institute Co. Ltd Beijing100069 China School of Process Environmental and Materials Engineering Centre for Computational Fluid Dynamics University of Leeds LS2 9JT United Kingdom State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

In China, coal quality fluctuates and deviates greatly from the original design in many large-scale coal-fired power plants. To maintain a secure level and combustion efficiency, a "coal combustion life cycle online monitoring system" (CLMS) has been developed and installed on a 21.MW boiler in China. Ten temperature detectors have been installed at the heights of three-layer burners along the furnace. To improve the accuracy of measuring unburnt carbon in fly ash, an adjustable microwave test facility was established. An on-line measurement device for unburnt carbon in ash has been newly developed and attached to the convection flue gas pass. To optimize combustion processes, a real-time neural network prediction model for coal calorific value has been developed. By calculating and analyzing the data in computer workstations, safety evaluation of burner ignition, economic analysis and energy loss analysis can be obtained in real time. As for fluctuation in coal quality, application of the system has improved boiler efficiency more than 1.0%, and reduced NOx by 1.-1.%. © Copyright Association of Energy Engineers (AEE).

关键词： Life cycle

来源：评论

学校读者我要写书评

暂无评论

Kinetic Characteristics of Passivation Behavior in OFP-Cu and OF-Cu

SSRN

引用

SSRN 2024年

作者： Ning, Zhiyuan Wen, Du Zhou, Qulan Li, Na Macdonald, Digby D. State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China Departments of Nuclear Engineering and Materials Science and Engineering University of California at Berkeley BerkeleyCA94720 United States Industrial Process and Energy Systems Engineering Ećole Polytechnique Fédérale de Lausanne EPFL SionCH-1951 Switzerland

This research presents a comprehensive comparative analysis of the passivation kinetics of OFP-Cu and OF-Cu in simulated repository electrolyte. The study employs a range of techniques, including potentiodynamic polarization, multi-step potentiostatic polarization, electrochemical impedance spectroscopy, and Mott-Schottky analysis, to explore the intricacies of corrosion behavior. The Point Defect Model (PDM) is used to interpret the steady-state physicochemical processes. Utilizing the results of PDM optimization, defect distribution diagrams within the passivation film were constructed, shedding light on the pivotal transition from p-type to n-type semiconductor properties of the film. The study concludes with an interpretation of the experimental data, highlighting the enhancement of copper's corrosion resistance due to phosphorus doping, as elucidated by the Solute-Vacancy Interaction Model. © 2024, The Authors. All rights reserved.

关键词： Copper corrosion

来源：评论

学校读者我要写书评

暂无评论

A Thermal Calculation Model for Tubular Condensing Heat Exchanger

SSRN

引用

SSRN 2023年

作者： Han, Lei Yang, Kaixuan Yang, Jiahui Li, Ruiyu Li, Yuhang Deng, Lei Che, Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an710049 China Shanghai Power Equipment Research Institute Co. Ltd. Shanghai200240 China Shunde Institute of Inspection Guangdong Institute of Special Equipment Inspection and Research Foshan528300 China Xi’an Thermal Power Research Institute Co. Ltd. Xi’an710032 China

The condensing heat exchanger is commonly applied in various heat exchange systems. It can efficiently recover moisture and heat from the flue gas that contains water vapor. However, the convective-condensation heat transfer process is so complicated that no mature thermal calculation model is available. This study develops a thermal calculation model for the widely employed tubular condensing heat exchanger in industry. To characterize the degree of the heat and mass transfer, this study introduces two parameters, namely the sensible and latent heat transfer efficiencies of fin. The thermal calculations are conducted for the condensing heat exchangers reported in the literature to verify the proposed model by comparing it with the experimental data. The results show that the absolute error of the calculated sensible and latent heat transfer efficiencies is 0.0365 and 0.0268, respectively. A maximum difference of 5.2 K has been acquired between the measured and calculated values of the outlet temperature. The relative error of the condensate water flowrate is mostly within ±5.0% and ±1..0% under the bare-tube and finned-tube conditions, respectively, with a maximum deviation of 0.7 and 1.4 kg h-1. This study provides a general model for designing and optimizing various tubular condensing heat exchangers accurately. © 2023, The Authors. All rights reserved.

关键词： Mass transfer

来源：评论

学校读者我要写书评

暂无评论

Zif-8 Loaded Ag/Zno Electrospun Nanofibers Enabling High-Performance H2 Gas Sensing for Battery Safety Early Warning

SSRN

引用

SSRN 2024年

作者： Wang, Ze Zhu, Lei Zhang, Jiaxin Wang, Jingzhao Cui, Xiangming Chen, Xin Liu, Wenbiao Ma, Hang Wang, Jianan Yan, Wei Department of Environmental Science and Engineering State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University 28 Xianning West Road Xi’an710049 China School of Physics and Electrical Engineering Weinan Normal University Chaoyang Street Weinan714099 China Center of Research & Development Yunnan Yuntianhua Co. LTD 1417 Dianchi Road Kunming650228 China

Safety issues triggered by battery thermal runaway have become the most crucial obstacle to the future development of the high-energy-density energy storage systems. As hydrogen (H2) will be inevitably generated along with heat release caused by the side reactions in the early stages of battery thermal runaway, rapid monitoring of trace H2 is considered as an effective measure enabling the battery safety early warning. Herein, to develop high-performance H2 sensing materials to monitor of low-concentration H2 leakage, ZIF-8 loaded Ag/ZnO electrospun nanofibers (ZAZ NFs) were designed by electrospinning and self-sacrificial template methods. Benefiting from all the enrichment and sieving effects of ZIF-8 shell, the catalytic and sensitization effects of Ag and abundant active sites provided by Ag and ZIF-8 loading, the ZAZ sensor enables ppb-level limit of detection toward H2, fast response (9 s), high selectivity and excellent humidity resistance (36.1.to 1.0 ppm H2 at 95% RH). Furthermore, this ZAZ sensor also enabled the safety early warning (67.79 s before battery bulge) for practical pouch lithium cells, highlighting its great application potential in future advanced battery safety management system. © 2024, The Authors. All rights reserved.

关键词： Organometallics

来源：评论

学校读者我要写书评

暂无评论

Investigations on affinity law under gas–liquid conditions in multistage radial and mixed-flow {1. pumps

International Journal of Fluid Engineering

引用

International Journal of Fluid engineering 2024年第1期1卷 56-70页

作者： Liang Chang Chenyu Yang Xiaobin Su Xiaoyu Dai Qiang Xu Liejin Guo State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

Affinity laws have been widely used in pump design and simulation under high-temperature and corrosive *** applying such laws,it is possible to shorten development cycles and reduce test ***,current applications of affinity laws are still limited to liquid *** this paper,expressions for affinity laws and their applicability are investigated for multistage radial and mixed-flow {1. pumps under gas–liquid conditions.A high-pressure(30 MPa)gas–liquid experimental platform is constructed,and three-stage and 25-stage radial pumps and a 1.-stage mixed-flow pump are investigated,with specific speeds of 1.7 and *** gas compressibility taken into account,the gas–liquid two-phase flow rate,head,and power,and the corresponding dimensionless hydraulic coefficients,are defined for {1. *** deterioration of gas–liquid pressurization performance is found to be divided into three processes with different dynamic mechanisms,corresponding to three flow *** inlet gas volume fraction of pump is used to judge dynamic *** the same inlet gas volume fractionsλ_(1.=λ_(2),when the gas–liquid flows in two pumps have the same flow pattern,dynamic similarity will be *** affinity law that is established shows good applicability to the three-stage radial {1. pump,with goodness of fit R^(2)larger than 0.9 for the two-phaseΨ_(m)–Φ_(m)andΠ_(m)–Φ_(m)performance ***,experimental results indicate that the affinity law also has good applicability to {1. pumps with different stage numbers and blade structures under gas–liquid conditions.

关键词： flow law radial

来源：评论

学校读者我要写书评

暂无评论

Investigations on affinity law under gas-liquid conditions in multistage radial and mixed-flow {1. pumps

国际流体工程（英文）

引用

国际流体工程（英文） 2024年第1期1卷 52-66页

作者： Liang Chang Chenyu Yang Xiaobin Su Xiaoyu Dai Qiang Xu Liejin Guo State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

Affinity laws have been widely used in pump design and simulation under high-temperature and corrosive *** applying such laws,it is possible to shorten development cycles and reduce test ***,current applications of affinity laws are still limited to liquid *** this paper,expressions for affinity laws and their applicability are investigated for multistage radial and mixed-flow {1. pumps under gas-liquid conditions.A high-pressure(30 MPa)gas-liquid experimental platform is constructed,and three-stage and 25-stage radial pumps and a 1.-stage mixed-flow pump are investigated,with specific speeds of 1.7 and *** gas compressibility taken into account,the gas-liquid two-phase flow rate,head,and power,and the corresponding dimensionless hydraulic coefficients,are defined for {1. *** deterioration of gas-liquid pressurization performance is found to be divided into three processes with different dynamic mechanisms,corresponding to three flow *** inlet gas volume fraction of pump is used to judge dynamic *** the same inlet gas volume fractions λ1.λ2,when the gas-liquid flows in two pumps have the same flow pattern,dynamic similarity will be *** affinity law that is established shows good applicability to the three-stage radial {1. pump,with goodness of fit R2 larger than 0.9 for the two-phaseΨm-Φm andΠm-Φm performance ***,experimental results indicate that the affinity law also has good applicability to {1. pumps with different stage numbers and blade structures under gas-liquid conditions.

关键词： conditions radial affinity gas-liquid investigations mixed-flow multiphase multistage pumps under

来源：评论

学校读者我要写书评

暂无评论

Editorial

引用

International Journal of Hydrogen Energy 2013年第29期38卷 12878-12878页

作者： Liejin Guo International Center for Renewable Energy Center & State Key Laboratory of Multiphase Flow in Power Engineering China

For many centuries, each generation gave to their offspring the same World that they received from their parents. The water in the rivers, seas, and oceans was clear; the forests were free to grow; and nature was empty of garbage. But everything has changed in just the last 250 years: year by year, while standards-of living increased, the Earth became a worse place for living, with less natural resources and more pollution.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Effects of velocity ratio on turbulent mixing layer at high Reynolds number

引用

Journal of Physics: Conference Series 2009年第1期147卷

作者： Fude Guo Bin Chen Liejin Guo Ximin Zhang State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

In this paper the effect of velocity ratio on plane mixing layer was experimentally investigated by Particle Image Velocimetry (PIV). The velocity ratio between low and high speed side are 0.25 and 0.50, respectively. The Reynolds number based on the velocity difference of two streams and hydraulic diameter of the channel is 66000. The results indicate that the maximum mean Reynolds stress on the same cross section is decreasing with the velocity ratio increasing. The maximum dimensionless mean vorticity is decreasing according to an exponential law along the stream-wise direction and the decreasing speed of dimensionless mean maximum vorticity is increasing with the velocity ratio increasing. The dimensionless vorticity caused by plate wake is decreasing sharply in a very short distance along the down stream wise direction and the decreasing speed is faster when the velocity ratio is larger.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Drop deformation and breakup with diffuse interface method

引用

AIP Conference Proceedings 2010年第1期1207卷

作者： S. L. Chen C. Z. Lin L. J. Guo Y. S. Wang State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an 710049 China

Two‐dimensional numerical simulation of the deformation and breakup of an isolated liquid drop suspended in immiscible viscous fluid under shear flow was performed with the diffuse interface method. The governing equations of the model were described by Navier—Stokes—Cahn—Hilliard equations. The surface tension was treated as a modified stress. In the paper, the critical Capillary number was plotted as a function of viscosity ratios with the method of approximation. Besides, From the numerical observations, the breakup of the droplets occurred by three mechanisms, namely, necking, end pinching, and capillary instability. Quantitative results for the deformation and breakup of drop are presented.

关键词：

来源：评论

学校读者我要写书评

暂无评论

PIV measurement of turbulent mixing layer flow with polymer additives

引用

Journal of Physics: Conference Series 2009年第1期147卷

作者： T Ning F Guo B Chen X Zhang State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

Turbulent mixing layer flow with polymer additives was experimentally investigated by PIV in present paper. The velocity ratio between high and low speed is 4:1.and the Reynolds number for pure water case based on the velocity differences of two steams and hydraulic diameter of the channel ranges from 1.667~73333. flow field and turbulent quantities of turbulent mixing layer with 200ppm polymer additives were measured and compared with pure water mixing layer flow. It is shown that the dynamic development of mixing layer is greatly influenced by polymer addictives. The smaller vortices are eliminated and the coherent structure is much clearer. Similar with pure water case, Reynolds stress and vorticity still concentrate in a coniform area of central part of mixing layer and the width will increase with the Reynolds number increasing. However, compared with pure water case, the coniform width of polymer additives case is larger, which means the polymer additives will lead to the diffusion of coherent structure. The peak value of vorticity in different cross section will decrease with the development of mixing layer. Compared with pure water case, the vorticity is larger at the beginning of the mixing layer but decreases faster in the case with polymer additives.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：