检索结果-内蒙古大学图书馆

Development of Liquid Slug Length in Gas-Liquid Slug flow along Horizontal Pipeline: Experiment and Simulation

Chinese Journal of Chemical engineering 2006年第5期14卷 626-633页

作者：王鑫郭烈锦张西民 State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University

The liquid slug length distribution is crucial for designing the downstream processing system with mul-tiphase pipeline. Experiments were conducted in a 1.3m long horizontal test loop. The measurements were per-formed by conductivity probes to determine the liquid slug length distribution. The data covered both the slug and plug flow regimes. From experimental results, the mean liquid slug lengths were relatively insensitive to gas and liquid flow rates in the higher mixture velocity range. But in the lower mixture velocity range, the mean liquid slug length decreased and then increased with mixture velocity. It shows that the development length of slug flow was longer than x/D=1.57. A slug tracking model was adapted to study the evolution of liquid slug length distribution in a horizontal pipeline. In the present model, the wake effect of elongated bubble and the pressure drop due to accel-eration are taken into account and random slug lengths are introduced at the entrance. The results of the model are compared with the measured slug length distributions of slug flow regime. It shows that the predicted mean and maximum slug lengths are in agreement with the experimental data at x/D=1.57 and the form of the slug length distributions is also predicted well by the model.

关键词： two-phase flow slug flow liquid slug length slug tracking

来源：评论

学校读者我要写书评

暂无评论

First law-based thermodynamic analysis on Kalina cycle

引用

中国高等学校学术文摘·能源与动力工程 2008年第2期2卷 145-151页

作者： Ying ZHANG Maogang HE Zhen JIA Xun LIU State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power EngineeringXi'an Jiaotong UniversityXi'an 710049China

Based on the first law of thermodynamics,and adopting the Peng-Robinson equation (P-R equation) as the basic equation for the properties of ammonia-water mixtures,a thermodynamic analysis on a single-stage distillation Kalina cycle is presented.A program to calculate the thermodynamic properties of ammoniawater mixtures,and that for calculating the performance of Kalina cycles,were developed,with which the heatwork conversion particulars of Kalina cycles were theoretically *** influences on the cycle performance of key parameters,such as the pressure and temperature at the inlet of the turbine,the back pressure of the turbine,the concentration of the working solution,the concentration of the basic solution and the cycle multiplication ratio,were analyzed.

关键词： engineering thermophysics Kalina cycle ammonia-water mixtures P-R equation thermodynamic property

来源：评论

学校读者我要写书评

暂无评论

A MODEL FOR LIQUID SLUG LENGTH DISTRIBUTION IN VERTICAL GAS-LIQUID SLUG flow

引用

Journal of Hydrodynamics 2009年第4期21卷 491-498页

作者： XIA Guo-dong CUI Zhen-zhen LIU Qing ZHOU Fang-de HU Ming-sheng College of Environmental and Energy Engineering Beijing University of Technology Beijing 100124 China State Key Laboratory of Multiphase Flow in Power Engineering Xi＇an Jiaotong University Xi＇an 710049 China

The slug length and the trailing Taylor bubble velocity in an upward vertical slug flow were measured by using the optical probes and the EKTAPRO 1.00 high speed motion analyzer. The correlation between the trailing bubble velocity and the length of liquid slug ahead of that bubble is derived from the experimental data. Based on this correlation as well as the bubble overtaking mechanism, a model for the slug length distribution at any designated locations along the pipe is proposed. The predicted results are in agreement with the experimental data.

关键词： gas-liquid two-phase flow slug flow Taylor bubble liquid slug

来源：评论

学校读者我要写书评

暂无评论

Photochemical Systems for Solar‑to‑Fuel Production

引用

Electrochemical Energy Reviews 2022年第3期5卷 137-177页

作者： Ya Liu Feng Wang Zihao Jiao Shengjie Bai Haoran Qiu Liejin Guo International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049ShaanxiChina

The photochemical system,which utilizes only solar energy and H_(2)O/CO_(2) to produce hydrogen/carbon-based fuels,is considered a promising approach to reduce CO_(2) emissions and achieve the goal of carbon *** date,numerous photochemical systems have been developed to obtain a viable solar-to-fuel production system with sufficient energy ***,more effort is still needed to meet the requirements of industrial *** this review,we systematically discuss a typical photochemical system for solar-to-fuel production,from classical theories and fundamental mechanisms to raw material selection,reaction condition optimization,and unit device/system advancement,from the viewpoint of ordered energy ***-of-the-art photochemical systems,including photocatalytic,photovoltaic-electrochemical,photoelectrochemical,solar thermochemical,and other emerging systems,are *** highlight the existing bottlenecks and discuss the developing trend of this ***,optimization strategies and new opportunities are proposed to enhance photochemical systems with higher energy efficiency.

关键词： Solar energy Photochemical Hydrogen Carbon-based fuels

来源：评论

学校读者我要写书评

暂无评论

Effect of ignition timing and hydrogen fraction on combustion and emission characteristics of natural gas direct-injection engine

引用

中国高等学校学术文摘·能源与动力工程 2008年第2期2卷 194-201页

作者： Jinhua WANG Zuohua HUANG Bing LIU Ke ZENG Jinrong YU Deming JIANG State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power EngineeringXi'an Jiaotong UniversityXi'an 710049China

An experimental study on the combustion and emission characteristics of a direct-injection spark-ignited engine fueled with natural gas/hydrogen blends under various ignition timings was *** results show that ignition timing has a significant influence on engine performance,combustion and *** interval between the end of fuel injection and ignition timing is a very important parameter for direct-injection natural gas *** turbulent flow in the combustion chamber generated by the fuel jet remains high and relative strong mixture stratification is introduced when decreasing the angle interval between the end of fuel injection and ignition timing giving fast burning rates and high thermal *** maximum cylinder gas pressure,maximum mean gas temperature,maximum rate of pressure rise and maximum heat release rate increase with the advancing of ignition ***,these parameters do not vary much with hydrogen addition under specific ignition timing indicating that a small hydrogen fraction addition of less than 20% in the present experiment has little influence on combustion parameters under specific ignition *** exhaust HC emission decreases while the exhaust CO2 concentration increases with the advancing of ignition *** the lean combustion condition,the exhaust CO does not vary much with ignition *** the same ignition timing,the exhaust HC decreases with hydrogen addition while the exhaust CO and CO2 do not vary much with hydrogen *** exhaust NOx increases with the advancing of' ignition timing and the behavior tends to be more obvious at large ignition advance *** brake mean effective pressure and the effective thermal efficiency of natural gas/hydrogen mixture combustion increase compared with those of natural gas combustion when the hydrogen fraction is over 1.%.

关键词： natural gas hydrogen ignition timing combustion emissions direct-injection

来源：评论

学校读者我要写书评

暂无评论

Estimation of thermodynamic properties of the ternary molten salt system, LiF-NaF-BeF2, by the modified Peng-Robinson equation

引用

中国高等学校学术文摘·能源与动力工程 2007年第2期1卷 174-180页

作者： ZHANG Dalin QIU Suizheng SU Guanghui JIA Dounan School of Energy and Power Engineering State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

The molten salt reactor (MSR), which is one of the generation IV reactors, can meet the demand of transmutation and breeding. The thermodynamic properties of the molten salt system like LiF-NaF-BeF2 influence the design and construction of the fuel salt and coolant in the MSR for the new generation. In this paper, the equation of state of the ternary system 1.%LiF-58%NaF-27%BeF2, over the temperature range from 873.1. to 1.073.1. K at one atmosphere pressure, is described using a modified Peng-Robinson (PR) equation. The densities of the ternary system and its components are estimated by this equation directly, and compared with the experimental data. Based on the equation of state, the other thermodynamic properties such as the enthalpy, entropyand heat capacity at constant pressure are estimated by the residual function method and the fugacity coefficient method respectively. The densities calculated by PR equation are highly in agr eement with the experimental data, and the enthalpy, entropy and heat capacity evaluated by the two different methods are consistent with each other. It can be concluded that the modified PR equation can be applied to evaluate the density of the molten salt system, and it is recommended that it be used as the basis to estimate the enthalpy, entropy and heat capacity of the molten salt system.

关键词： thermodynamic properties molten salt LiF-NaF-BeF2 Peng-Robinson equation

来源：评论

学校读者我要写书评

暂无评论

The Performance Study on Hydrogen Production From Medium Temperature Methane Chemical Looping Steam Reforming Using Lithium-based Absorbent

引用

Kung Cheng Je Wu Li Hsueh Pao/Journal of engineering Thermophysics 2025年第5期46卷 1401-1408页

作者： Wang, Xuyun Li, Yang Gai, Zhongrui Rao, Qiong Liu, Mingkai Pan, Ying School of Engineering Science University of Science and Technology of China Hefei230027 China Institute of Engineering Thermophysics Chinese Academy of Sciences Beijing100190 China University of Chinese Academy of Sciences Beijing100049 China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Lithium silicate serves as a novel CO2 absorbent with moderate absorptionregeneration temperature range (500∼700◦C) and excellent cycling stability. In this study, Li2CO3 was selected as the precursor for the preparation of lithium silicate. Additionally, a eutectic co-doping method with potassium elements was employed to enhance its reactivity. Using extrusion-spheronization, we successfully produced absorbent particles with high mechanical strength and cycling stability. The effects of absorption-regeneration temperature, CO2 concentration and particle diameter on the performance of absorbent particles have been studied in detail. Furthermore, mixed with NiO oxygen carriers, sorption-enhanced chemical looping reforming (SE-CLR) experiments were conducted at the range of 500∼650◦C for hydrogen production and in situ CO2 capture factors such as reaction temperatures and oxygen carrier to absorbent mass ratios were then investigated The results showcase that at the optimal reaction temperature of 600◦C, the SE-CLR process effectively lowered the reaction temperature by 25◦C, achieving a 1.% increase in methane conversion rate and hydrogen purity and CO2 capture rate above 90% were attained. © 2025 Science Press. All rights reserved.

关键词： Silicates

来源：评论

学校读者我要写书评

暂无评论

Bubble Behavior and Heat Transfer of Nucleate Pool Boiling on Micro-Pin-Finned Surface in Microgravity

引用

Chinese Physics Letters 2011年第1期28卷 160-163页

作者： WEI Jin-Jia XUE Yan-Fang ZHAO Jian-Fu LI Jing State Key Laboratory of Multiphase Flow in Power Engineering Xi 'an Jiaotong University Xi'an 710049 Key Laboratory of Microgravity (National Microgravity Laboratory)/CAS Institute of Mechanics Chinese Academy of Sciences Heijing 100190

Nucleate pool boiling on micro-pin-finned surface structure is proposed for efficiently cooling electronic compo- nents with high heat flux in microgravity, and was verified by experiments performed utilizing the drop tower Beijing. Micro-pin-fins with tile dimensions of 50 × （30 μm2 （thickness × height） and the space of 50 μm were fabricated on the chip surface by the dry etching technique. FC-72 was used as the working fluid. Nucleate pool boiling of FC-72 on a smooth surface was also tested for comparison. Unlike much obvious deterioration of heat transfer of nucleate pool boiling on the smooth surface in microgravity, constant heater surface temperature of nucleate pool boiling for the micro-pin-finned surface was observed, even though a large coalesced bubble completely covered the surface under microgravity condition. The performance of high efficient heat transfer on micro-pin-finned surface is independent of the gravity, which stems from the sufficient supply of fresh liquid to the heater surface due to the capillary forces.

关键词： Fluid dynamics Surfaces, interfaces and thin films

来源：评论

学校读者我要写书评

暂无评论

Study on Thermo-Conductive Plastic Finned TubeRadiators

引用

Journal of Thermal Science 1997年第1期6卷 21-26页

作者： Yang Jiehui Cheng Lixin(Chemical engineering School, {1. key laboratory of multiphase flow in power engineering, Xi’anJiaotong University, Xi’an 71.049, China) Chemical Engineering School State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

This paper discusses thermo-conductive plastic finned tube radiators used in water saving type powerstations. First, the development of thermo-conductive plastics is introduced. Second, in order todetermine the rational geometric dimensions of thermo-conductive plastic finned tubes, an objectivefunction which takes the minimum volume of the consumed material for making finned tubes as an ob-ject is introduced. On the basis of the function, the economy comparison between thermaxonductiveplastic finned tubes and metal finned tubes is conducted.

关键词： air-cooling radiator thermo-conductive plastic finned tube optimum geometric parameters economy comparison

来源：评论

学校读者我要写书评

暂无评论

Experimental and Numerical Study on Co-combustion Behaviors and NO_(x) Emission Characteristics of Semi-coke and Coal in a Tangentially Fired Utility Boiler

引用

Journal of Thermal Science 2021年第4期30卷 1116-1131页

作者： WANG Chang’an FENG Qinqin JIN Liyan WANG Zhichao YAO Wei WANGPengqian DU Yongbo ZHANG Xilai YANG Zhongcan CHE Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power EngineeringXi’an Jiaotong UniversityXi’an 710049China Xi’an Thermal Power Research Institute Co. LTD.Xi’an 710054China

The utilization of powdery semi-coke as a power fuel in pulverized coal-fired power plants has become a new and potential technique to consume the excess powdery *** characteristic of low volatile results in poor combustion performance and high NO_(x) emission,and to co-fire with bituminous coal is a practical strategy to address this ***,the co-combustion characteristics and the inherent interaction between semi-coke and coal remain insufficiently *** addition,the influences of secondary air arrangement,the boiler operation load,and the fuel type on co-combustion process are still unclear,which is urgent to be further *** the present study,experiments and numerical simulations were jointly utilized to inquire into the co-combustion behaviors and NO_(x) emission features of semi-coke and *** results demonstrated that the"out-furnace method"was a suitable choice for small-capacity boiler when the proportion of semi-coke was 33%,due to the limited combinations of the semi-coke injection *** was recommended that semi-coke was preferred to be injected from the middle layers of the furnace under the"in-furnace method"to improve the overall co-combustion *** critical value of the separated over fire air ratio in this study was 27.5%,over which a slight drop of carbon content in fly ash could come ***,the elevation in the proportion of separated over fire air gave rise to the significant decline of NO_(x) *** constricted secondary air arrangement was preferred to be employed due to the high boiler *** separated over fire air and the surrounding air needed to maintain a wide-open degree to prevent the increase of NO_(x) emissions and the coking of *** the load reduction regulation method adopted in this study,the NO_(x) concentration first rose and then dropped,while the burnout ratio decreased obviously as the operation load was *** combinations of coa

关键词： semi-coke numerical simulation co-combustion NOx emission blending method

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：