检索结果-内蒙古大学图书馆

Development of a three-dimensional method for thermal-hydraulics/neutronics coupling analysis and its application on CFETR helium-cooled solid breeder blanket

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2021年 3卷 154-165页

作者： Lian, Qiang Tian, Wenxi Qiu, Suizheng Su, G.H. Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

Blankets are of practical importance in the fusion reactor due to their main functions for engineering application. As the fusion {1. designed for the Chinese Fusion engineering Test Reactor (CFETR) is increased from 200 MW to 1.5 GW during its phase II operation, more challenges are issued for blankets from the points of view of thermal-hydraulics, neutronics, mechanics, and safety. In this paper, the Coupling Analysis of Thermal-hydraulics and Neutronics Interface Code (CATNIC) was developed using the user-defined function (UDF) in the CFD software FLUENT. The explicit coupling scheme based on cell-to-cell mapping approach was adopted to transfer data between neutronics calculation and thermal-hydraulics simulation. Three-dimensional thermal-hydraulic model and neutronics model were established using Fluent and MCNP4C, respectively. The helium-cooled solid breeder (HCSB) blanket of CFETR was simplified as a slice model to reduce the computing resources. With the slice model of CFETR HCSB blanket, the coupling analysis was carried out using the developed CATNIC. The calculation results from coupling and non-coupling analyses were compared to verify the feasibility of the coupling method in this study. As the helium coolant was considered as the transparent medium for neutron, the thermal-hydraulic and neutronics analyses were both converged after two iterations. However, using the developed coupling method in this study, the detailed change of tritium production ratio (TPR) and nuclear heat deposition in different parts of the blanket was revealed, which could provide important guidance for the design of the distribution for both coolant and purge gas. © 2021.Xi'an Jiaotong University

关键词： Coolants

来源：评论

学校读者我要写书评

暂无评论

EFFECT OF INNER FIN TUBE STRUCTURE ON COMPREHENSIVE PERFORMANCE OF SUPERCRITICAL CARBON DIOXIDE AND LEAD BISMUTH EUTECTIC HEAT EXCHANGER

EFFECT OF INNER FIN TUBE STRUCTURE ON COMPREHENSIVE PERFORMA...

引用

ASME 2023 Heat Transfer Summer Conference, HT 2023

作者： Shuhan, Liu Ji’an, Liu Qingjiang, Liu Xianliang, Lei State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (纸本)9780791887165

In the combined system of lead cooled fast reactor (LFR) and supercritical carbon dioxide (S-CO2) Brayton cycle, the intermediate heat exchanger plays a key role in the whole {1. system. However, the existing heat exchanger can not meet the trend of miniaturization of lead cooled fast reactor. Considering the thermo-physical properties and heat transfer behaviors in both S-CO2 and liquid lead bismuth eutectic (LBE) are significantly different, an asymmetric compact coupled heat exchanger learning from Honeycomb structure is proposed. Through numerical simulation, it is found that the thermal resistance mainly exists in the cold side. In order to enhance the heat transfer at the S-CO2 side, the fin tube is adopted at the cold side. The results show that the heat transfer performance and friction factor of the heat exchanger increase with the increase of fin height, width and number of fins due to the increase of heat transfer area. When the fin height is increased, PEC gradually increases at low inlet velocity, and then decreases at high inlet velocity;When the fin width is increased, PEC increases first and then decreases at low inlet velocity, and decreases gradually at high inlet velocity;With the increase of the number of fins, PEC showed an increasing trend at different inlet velocities. © 2023 by ASME.

关键词： Supercritical fluid extraction

来源：评论

学校读者我要写书评

暂无评论

Mitigating check valve slamming and subsequentwater hammer events for PPFS using MOC

引用

Nuclear Science and Techniques 2009年第2期20卷 118-123页

作者： TIAN Wenxi SU Guanghui WANG Gaopeng QIU Suizheng XIAO Zejun State Key Laboratory of Multiphase Flow in Power Engineering Department of Nuclear Science and TechnologyXi＇an Jiaotong University Xi＇an 710049 China National Key Laboratory of Bubble Physics ＆ Natural Circulation Nuclear Power Institute of China Chengdu 610041 China

The method of characteristic(MOC) was adopted to analyze the check valve-induced water hammer behaviors for a Parallel Pumps Feedwater System(PPFS) during the alternate startup *** motion of check valve disc was simulated using inertial valve *** parameters including the pressure oscillation,local flow velocity and slamming of the check valve disc *** been *** results showed that severe slamming between the valve disc and valve seat occurred during the alternate startup of parallel *** induced maximum pressure vibration amplitude is up to 5.0 *** scheme of appending a damping torque to slow down the check valve closing speed was also performed to mitigate of water *** has been numerically approved to be an effective approach.

关键词：止回阀建设部事件水锤泵给水系统启动过程压力振动瞬态参数

来源：评论

学校读者我要写书评

暂无评论

THERMAL-HYDRAULIC ANALYSIS OF THE COOLING WALL IN ULTRA SUPERCRITICAL COAL-FIRED GENERATION PLANTS DURING DEEP PEAKING

THERMAL-HYDRAULIC ANALYSIS OF THE COOLING WALL IN ULTRA SUPE...

引用

ASME 2024 power Conference, power 2024

作者： Wang, Dengliang Zhao, Yongliang Chen, Weixiong Wang, Chaoyang Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

ISBN: (纸本)9780791888186

Due to increasingly severe environmental and climate concerns currently, renewable energy is highly penetrated around the world. However, given the intermittency and instability of renewable energy, coal-fired generation plants urgently need to undertake deep peak shaving tasks, resulting in the frequent load cycling transient processes of units. It will have a significant effect on the safe operation of the boiler components, especially for the hydrodynamic instability of cooling wall within the boiler. This paper takes a 1.00 MW ultra-supercritical primary reheat coal-fired generation plants as the research object. In accordance with the heating load distribution characteristics of cooling wall, a hydrodynamic characteristic calculation model of cooling wall within the boiler is constructed based on the mass conservation, momentum conservation and energy conservation equations, which introduces numerous empirical correlations available for heat transfer and hydraulic resistance calculation at the same time. The working fluid temperature in the direction of cooling wall height at 1.0% THA, 75% THA, 50% THA, 40% THA and 30% THA, as well as the metal temperature of the inner, outer and fin tube walls are analyzed. The changes in metal wall temperature of cooling wall under different load cycling rates are obtained during the low load operating range of 50% THA to 30% THA. Ultimate load cycling rates of the coal-fired generation plants without causing the overtemperature issue of cooling wall is obtained. Finally, when the revised fuel supply control strategy is adopted, it is able to significantly reduce the maximum metal wall temperature during the rapid load cycling process. The maximum load cycling rate is increased from 2.5% Pe/min to 3.0% Pe/min for the loading up process. Copyright © 2024 by ASME.

关键词： Coal

来源：评论

学校读者我要写书评

暂无评论

Rapid Prediction Models for Oil Temperature and Surrounding Environment Temperature Fields in Buried Hot Crude Oil Pipelines

引用

Journal of Pipeline Systems engineering and Practice 2025年第3期16卷

作者： Yan, Feng Xu, Jingyan Li, Qifu Zhou, Chaoqun Ji, Mingyang Gong, Junhua Xiang, Yue Chen, Yujie Han, Dongxu Wang, Peng Dept. of Storage and Transportation Technology Research PipeChina Research Institute of Science and Technology 4 Dongting 1st Rd. Binhai New Area Tianjin300450 China Project Management Center of Production and Operation Dept Northeast Company of PipeChina Hunnan District Liaoning Province Shenyang110000 China Dept. of Production and Operation Changqing Oil and Gas Transportation Branch of Northwest Company of PipeChina Xingqing District Yinchuan Ningxia750004 China School of Mechanical Engineering Beijing Institute of Petrochemical Technology Beijing102617 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'An Jiaotong Univ Xi'an710049 China Dept. of Digital Twin for Energy and Power Systems Sichuan Energy Internet Research Institute Tsinghua Univ Sichuan610213 China

Wax-rich or high-viscosity crude oil requires heating for long-distance transportation in buried pipelines. Monitoring the temperature distributions and variations of both oil and surrounding environment is crucial to ensuring safety and economic efficiency. This study proposes two models for rapidly predicting the steady-state oil temperature and surrounding environment temperature fields based on the Fourier neural operator (FNO) network and U-shaped network (UNet), respectively. These models leverage numerical results as training data, incorporating boundary conditions and environment grid coordinates at the pipeline cross section as inputs to predict the temperature distributions of both oil and the surrounding environment along the buried pipeline. With optimized hyperparameters, the models achieve accurate and efficient predictions. The FNO and UNet models had average RMS errors (RMSEs) in environment temperature field prediction of 2.68×1.-3 and 5.49×1.-3 at the pipeline cross section, respectively. For oil temperature predictions, the FNO model had an average relative error of 1.49×1.-4, compared with 2.55×1.-4 for the UNet model, with average absolute error values of 5.32×1.-3 and 7.24×1.-3, respectively. Moreover, both models exhibited strong generalization, with an average RMSE in the environment temperature field prediction of less than 3.5×1.-2 and an average relative error in oil temperature predictions of less than 2.1.1.-3 across different data sets. Comparatively, the FNO and UNet model had slightly higher prediction accuracy than the UNet model. In terms of computational efficiency for a 1.0-km pipeline, these models offer improvements of at least 1.6.25× over the numerical simulation method, with a maximum improvement of 1.775.03× as the number of simultaneously predicted pipeline cross sections increases. © 2025 American Society of Civil Engineers.

关键词： flowlines

来源：评论

学校读者我要写书评

暂无评论

Optimization of the concentration field in a suspended photocatalytic reactor with the periodically changing solar irradiation

Optimization of the concentration field in a suspended photo...

引用

26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 201.

作者： Cao, Fei Zhao, Liang Guo, Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

Feasibility of the solar photocatalysis has been validated theoretically and experimentally. Main concerns on the solar photocatalysis in the solutions are: the mass transfer limitation between the photocatalyst and the solution, and the concentration or radiation distribution in the photoreactors. Most researches concentrated their research on one aspect. There is limited research considering variable catalysis concentrations together with the changing solar radiation. However, outdoor solar photocatalysis devices, i.e. for hydrogen production or waste water degradation, would practically face this phenomenon. In the present study, the photon absorption in a suspended photocatalytic reactor was simulated by adopting Monte Carlo method and the six-flux radiation absorption-scattering model. Different photocatalyst concentrations were taken into account. Simulation results indicated that the photon absorption had a close relationship with the concentration distribution of the photocatalysts, and that there is an optimal concentration gradient in the photoreactor leading to the maximum photon absorption. Accordingly, the concentration field is optimized according to the changing solar irradiation. The present work is expected to be of effective value for obtaining the optimal operating parameters for industrial solar photocatalytic applications.

关键词： Solar radiation

来源：评论

学校读者我要写书评

暂无评论

THE FLEXIBILITY ENHANCEMENT OF SUBCRITICAL COAL-FIRED power PLANTS: CONTROL STRATEGY OPTIMIZATION FOR LIVE AND REHEAT STEAM TEMPERATURE

THE FLEXIBILITY ENHANCEMENT OF SUBCRITICAL COAL-FIRED POWER ...

引用

ASME 2024 power Conference, power 2024

作者： Chen, Chen Liu, Ming Wang, Chaoyang Zhao, Yongliang Yan, Hui Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (纸本)9780791888186

With the increasing penetration of renewable power, flexible power sources are urgently required by the power grid to balance the supply and demand sides. Therefore, the operational flexibility of subcritical coal-fired power plants should be further enhanced. In this study, dynamic models of a reference 330MW subcritical coal-fired power plant were developed and validated. The load ramp performances of the reference plant were simulated. The maximum ramp rates during loading down processes were 2%Pe/min and 1.5%Pe/min in 75% -50% and 50% -40% load cycling ranges, respectively, and the maximum ramp rate during loading up processes is 1.5%Pe/min. That the live steam and reheat steam temperatures exceeding their thresholds limits for the load ramp rates. The subcritical power unit has a steam drum, serving as a substance and energy storage device, and allows partial decoupling of feedwater flow and coal flow. Consequently, an enhanced steam temperature control strategy, facilitated by adjusting the feedwater flow rate during the load ramp processes, was proposed. The feedwater flow rate is appropriately regulated during load cycling dynamic processes to assist the control of live steam and reheat steam temperatures. The models to obtain the live steam and reheat steam temperature variations influenced by the feedwater flow rates are developed, and implemented in the control strategy. Then, simulations on the reference power plant with the enhanced control strategy were conducted, and the temperature overshoots have been effectively suppressed. As a result, the load ramp rate is increased. For example, in the load cycling range of 75%-40%, the overall unit ramp rate is increased by 1.Pe/min, achieving an enhancement in the operational flexibility of subcritical units. Copyright © 2024 by ASME.

关键词： Coal

来源：评论

学校读者我要写书评

暂无评论

Study on iterative algorithm of full plate cross-flow and counter-flow printed circuit heat exchanger for fluoride-salt-cooled high-temperature advanced reactor

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2023年第2期5卷 86-96页

作者： Li, Xinze Zhang, Dalin Li, Xinyu Tian, Wenxi Qiu, Suizheng Su, G.H. State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China

In the concept of Fluoride-Salt-cooled high-Temperature Advanced Reactor (FuSTAR), the Printed Circuit Heat Exchanger (PCHE) is mainly considered in its supercritical carbon dioxide (S–CO2) Brayton cycle secondary loop. The design of the PCHE is based on the property of working fluid provided by the Brayton cycle system design. Therefore, a fast and iterative PCHE design method is required. In this study, a mathematical model based on Picard's iterative method is proposed. The model can solve full plate temperature field with complex boundary conditions and initial values including cross-flow and counter-flow PCHE in parallel. Based on FuSTAR Brayton cycle design conditions, three sizes of cross-flow and counter-flow PCHEs are simulated respectively by the mathematical model. Compared with Computational Fluid Dynamics (CFD) models, a one and three-dimensional coupling model and a three-dimensional model, the mathematical model reduced the computing time from 1.to 1. h to 1.1. s, and the maximum temperature mean deviation is 1..6% for the smallest size case because of the edge effect and local disturbance, but 8.4% for other size. Taking secondary loop recuperator design as example, the computing speed and accuracy of the mathematical model can meet the design requirements of FuSTAR PCHE. © 2023 Xi'an Jiaotong University

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

Preliminary study on FROBA-SCO2 with transient models and its application for Reactivity Initiated Accident and loss of flow accident

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2022年第3期4卷 101-108页

作者： Yang, T.A. Zhang, K. Yang, H.K. Tian, W.X. Qiu, S.Z. School of Nuclear Science and Technology Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

As a coolant enabling the reactor with a high efficiency and low volume, the supercritical CO2 has becoming a hot topic nowadays. However, the fuel rod behaviors under accidents are not studied thoroughly, especially the interaction between the coolant and the cladding. With the previous study of fuel rod behaviors analysis of supercritical CO2 cooled nuclear reactor under steady state operation, transient state models are implemented and the upgraded code can be used to predict the fuel rod behaviors under RIA and LOFA. After the comparation of the calculation results with SACOS-SCO2, the tendency and numerical value are close, so the accuracy is warranted. The upgraded FROBA-SCO2 is used to predict the fuel rod behaviors under RIA and LOFA conditions and the results indicate that the maximum temperature of cladding and fuel is within safety limits. © 2022

关键词： Coolants

来源：评论

学校读者我要写书评

暂无评论

NUMERICAL SIMULATION OF FLUID-STRUCTURE COUPLING FOR THE MAIN PUMP OF LEAD COOLED FAST REACTOR 30

NUMERICAL SIMULATION OF FLUID-STRUCTURE COUPLING FOR THE MAI...

引用

30th International Conference on Nuclear engineering, ICONE 2023

作者： Xiang, Zutao Li, Liangxing Zhao, Jiayuan Xu, Xiangyang State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (纸本)9784888982566

The main pump blades of lead cooled fast reactor have complex mechanical characteristics, and there are complex fluid-structure coupling problems in the structural analysis of the impeller. In this paper, CFX software is mainly used for numerical simulation to carry out one-way fluid-structure coupling research on the moving blade of the main pump. Generally, three kinds of materials as Ti3SiC2, T91.steel and 304 stainless steel are considered for the moving blade of main pump and the deformation distribution and equivalent stress distribution of the three models under the three moving blade materials are analyzed respectively. Finally, the modal analysis of the moving blade of the main pump is carried out. The results show that the resistance to deformation of moving blade made in Ti3SiC2 is better than those of T91.steel and 304 stainless steel;The equivalent stress on the pressure surface of Ti3SiC2 is slightly higher than those of T91.steel and 304 stainless steel, and the maximum equivalent stress on the pressure surface of moving blade occurs on the inner edge of the blade. This research can provide reference for the design of moving blades, and help to improve the service life of the main pump. © 2023 by JSME.

关键词： Numerical models

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：