检索结果-内蒙古大学图书馆

A simple analytical model to predict liquid unloading in the horizontal gas well

Journal of Hydrodynamics 2021年第5期33卷 1056-1064页

作者： Zhi-bin Wang Jin-quan Ling Tian-li Sun Hong-yan Shi Guo Zhu State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChendu 610500China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China No 2 Gas Production PlantSouthwest Oil and Gas CompanySINOPECLangzhong 637400China Infrastructure Department Southwest Oil and Gas CompanySINOPECChengdu 610041China

An accurate prediction of the critical gas velocity for the liquid loading is of great importance for operators to select the tubing diameter for the newly drilled gas wells,or to optimize the production rate for production *** is clear from previous experimental studies of the liquid entrainment rate in the gas core that the liquid is mainly carried in the form of film under the critical condition of the liquid loading *** is more reasonable to establish a mathematical model based on the film reversal rather than based on the droplet *** our previous paper entitled“Prediction of the critical gas velocity of liquid unloading in the horizontal gas well”,a new analytical model was established based on the force balance between the gas-liquid interfacial friction force and the bottom film gravity,but the model is not very convenient to use because of the complexity of calculating the average film *** the present study,a new method is proposed to calculate the average film thickness from the bubble drift velocity in the mixture,so the new analytical model becomes much easier to *** new analytical model is evaluated against 1.3 sets of experimental data,the data in 1.4 vertical gas wells and one horizontal gas ***,the effect ofthe liquid loading on the production of the horizontal gas well is also analyzed.

关键词： Horizontal gas well inclined annular flow liquid-film thickness liquid unloading

来源：评论

学校读者我要写书评

暂无评论

A New Model Coupling Interface Tracking Methods and Two‐Fluid Model for Simulation of Incompressible Gas‐liquid Two‐Phase flow

引用

AIP Conference Proceedings 2010年第1期1207卷 843-848页

作者： K. Yan Y. B. Zhang D. C. Che Z. H. Lin State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University China

A model coupling two basic models, the model with interface tracking method and two‐fluid model, for simulation of incompressible gas‐liquid two‐phase flow is proposed. A united solution frame shared by the two basic models is built. In the shared solution frame, the Navier—Stokes equations of the two basic models can be dealt with in a uniform form. In the proposed model, there are three phases, which are divided not only by physics but also by the length scale of interface, including the liquid phase, the large‐length‐scale‐interface gas phase and the small‐length‐scale‐interface gas phase. The special treatment named by “void fraction redistribution” is adopted for the special grids which contain all three phases. Based on the united solution frame, MCBA—SIMPLE algorithm is used to solve the equations. Two problems are calculated to show that the proposed model has the merits of the two basic models.

关键词：

来源：评论

学校读者我要写书评

暂无评论

The blow-off and transient characteristics of co-firing ammonia/methane fuels in a swirl combustor 38th

The blow-off and transient characteristics of co-firing ammo...

引用

38th International Symposium on Combustion, 2021

作者： Zhang, Meng Wei, Xutao Wang, Jinhua Huang, Zuohua Tan, Houzhang State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China MOE Key Laboratory of Thermo-Fluid Science and Engineering Xi'an Jiaotong University Xi'an 710049 China

Recent studies have demonstrated that ammonia could be one of the most promising hydrogen carrier candidates which can be used in large-scale power plants. However, it is challenging to burn ammonia in gas turbines due to its narrow flame stabilization limits. In this study, the blow-off characteristics and flame macrostructure transition behavior of ammonia/air flame (NH₃ flame) and ammonia/methane/air flame (50%NH₃ flame) in a swirl combustor were investigated. Flame structures and {1. fields near the blow-off limit were analyzed. Methane/air flame (CH₄ flame) was also examined for comparative purposes. The {1. field and instantaneous OH profile were measured with PIV and OH-PLIF technique, respectively. Large eddy simulation (LES) was conducted to extend the understanding of the experimental findings. Results revealed that the NH₃ flame possesses a poor lean flame stability limit which can be largely extended by adding CH₄ in the fuel. Changing swirl number (S) had no apparent effect on the lean blow-off limit (Φ_b) for the NH₃ flame. On the contrary, a clear extension on Φ_b was found for the 50%NH₃ flame when increasing S. Four flame macrostructure modes were identified when decreasing equivalence ratio (Φ). The transition from flame II to flame III ((Φ_tdescribes the transition equivalence ratio) can be considered as the early warning of blow-off for a swirl stabilized flame. For the NH₃ flame, there was no clear flame macrostructure transition at small inlet velocities (U < 3.8 m/sec), i.e., Φ_b ≈ Φt. The difference between Φ_b and (Φ_twas observed as the inlet velocity increased. However, for the 50%NH₃ and CH₄ flames, a clear flame macrostructure transition from flame II to flame III was observed even for a lower inlet velocity. The LES results demonstrated that the NH₃ flame h

关键词： Ammonia

来源：评论

学校读者我要写书评

暂无评论

Thermodynamic analysis on a heat-power decoupling system integrated with absorption heat pump

Thermodynamic analysis on a heat-power decoupling system int...

引用

201. Canadian Society for Civil engineering Annual Conference, CSCE 201.

作者： Wang, Liyuan Liu, Ming Fu, Yue Liu, Jiping Yan, Junjie MOE Key Laboratory of Thermal Fluid Science Engineering School of Energy and Power Engineering Xi'an Jiaotong University Xi'an Shaanxi China State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi'an Jiaotong University Xi'an Shaanxi China

ISBN: (纸本)9780791883747

Because of the continuous expanding of the district heating, the heating load of combined heat and power(CHP) plants increases year by year. The minimum power load of CHP plant increases with the heating load due to the heat-power coupling mechanism. Therefore, heat-power decoupling is necessary to improve the operation flexibility for CHP units. Integrating the absorption heat pump(AHP) is an effective method to realize the heat-power decoupling. In this study, a 330MW CHP unit model and AHP model have been developed and validated. The performance of the heat-power decoupling and energy saving performance has been investigated by comparing the thermodynamic performance indicators. Results show that, the proposed system can increase the maximum heating load and decrease the power generation when the primary network return temperature is decreased. When the heating steam extraction is kept constant, with the increase of the primary network return water temperature, the heat generation efficiency and the standard coal consumption rate of heating increases, the coal consumption rate of power generation and the heating efficiency decreases. And the primary network return water temperature increases from 40 °C to 70 °C, the coal consumption rate of power generation decreases by 4.3 g/kWh, and the coal consumption rate of heating increases by 0.67 kg/GJ. Copyright © 2020 ASME.

关键词： Water temperature

来源：评论

学校读者我要写书评

暂无评论

Severe slugging in a flexible S-shaped riser system: Experimental studies and transient simulation

引用

AIP Conference Proceedings 2013年第1期1547卷 537-544页

作者： Wensheng Li Liejin Guo Nailiang Li State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University China

Severe slugging, which could induce large-amplitude pressure and flow rate fluctuations, is a major and expensive problem in {1. transportation systems of offshore oil production system. To avoid such problem is a basic requirement for flow assurance management. This study is an experimental and numerical investigation of severe slugging in a relatively long pipeline-riser system. A series of experiments on two-phase, air-water flow in a flexible Sshaped riser were carried out. The experimental system has a 1.4m long horizontal pipeline connected to a 1.m long pipe which is inclined to −2degree from horizontal, followed by a 1..3m high riser operating at atmospheric end pressure. Four types of flow patterns were found and characterized by the pressure fluctuations at the bottom of the riser. A flow patter map for the prediction of severe slugging was developed based on the experimental results. The detailed characteristics of severe slugging such as pressure fluctuations, liquid holdup, under different gas-liquid superficial velocities were provided. A transient model to predict the flow behavior in the pipeline-S-shaped riser system was developed based on an existing model (OLGA). The modified model, which was tested against new experimental results obtained in this study, showed that the four types of flow patterns observed in the experiment were predicted with acceptable discrepancies. The flow pattern map was obtained using present model, as well as the detailed characteristics of severe slugging. In addition, the reasons for the difference between experimental and numerical results were analysed in this article. The motive of the numerical studies was to identify the areas that could not be reproduced by the present model and to give some suggestions for future models.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Statistical analysis on the signals monitoring multiphase {1. patterns in pipeline-riser system

引用

AIP Conference Proceedings 2013年第1期1547卷 221-229页

作者： Jing Ye Liejin Guo State Key Laboratory of Multiphase Flow in Power Engineering Xi 'an Jiaotong University China

The signals monitoring petroleum transmission pipeline in offshore oil industry usually contain abundant information about the multiphase {1. on {1. assurance which includes the avoidance of most undesirable {1. pattern. Therefore, extracting reliable features form these signals to analyze is an alternative way to examine the potential risks to oil platform. This paper is focused on characterizing multiphase {1. patterns in pipeline-riser system that is often appeared in offshore oil industry and finding an objective criterion to describe the transition of {1. patterns. Statistical analysis on pressure signal at the riser top is proposed, instead of normal prediction method based on inlet and outlet {1. conditions which could not be easily determined during most situations. Besides, machine learning method (least square supported vector machine) is also performed to classify automatically the different {1. patterns. The experiment results from a small-scale loop show that the proposed method is effective for analyzing the multiphase {1. pattern.

关键词：

来源：评论

学校读者我要写书评

暂无评论

New revised correlation to predict pressure drop for oil-gas two-phase flow through horizontal pipe

New revised correlation to predict pressure drop for oil-gas...

引用

International Petroleum Technology Conference 2007, IPTC 2007

作者： Liu, Wenhong Guo, Liejin Zhang, Ximin Lin, Kai Yang, Long Feng, Yaorong Tubular Goods Research Center of CNPC Key Laboratory for Mechanical and Environmental Behavior of Tubular Goods China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University China

ISBN: (纸本)9781615673360

An experimental investigation on oil-gas two-phase flow through a straight horizontal plexiglas pipe within 40mm inner diameter was conducted. The superficial velocity ranges of oil and air were 0.05-0.61.m/s and 0.024-50.64m/s, respectively. The atmospheric temperature condition was maintained throughout the *** frictional pressure drop multiplier of two-phase flow was expressed using the Lockhart-Martinelli parameter correlation in accordance with typical flow pattern, but the modification factor C in the correlations was defined afresh according to flow conditions. New predict correlations for pressure gradient in accordance with typical flow patterns were proposed and the mechanisms of pressure drop production were analyzed for each flow patterns. The proposed models give a good agreement with the experimental data. Copyright 2007, International Petroleum Technology Conference.

关键词： Two phase flow

来源：评论

学校读者我要写书评

暂无评论

Simulation of a solar tower thermal power plant using TRNSYS

Simulation of a solar tower thermal power plant using TRNSYS

引用

26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 201.

作者： Yang, Yan Zhang, Fan Cao, Fei Zhao, Liang Guo, Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China Shanghai Electric Power Generation Group Co. Ltd. Shanghai China

The solar tower thermal power technology is a method to achieve the large-scale utilization of solar energy. A user defined TYPE of the heat receiver for the solar tower thermal power plant (STTPP) is established in the TRNSYS program with Fortran codes. Full-year simulation of the STTPP is investigated based on different input parameters, weather conditions and plant control strategies by taking Beijing as a case study. Through this case, the influences of the receiver diameter, flow form and inlet/outlet temperature on the thermal efficiency, total pump power, power efficiency and 'solar-thermal-electricity' transfer efficiency are studied. Simulation results show that the thermal efficiency of receiver rises with the decrease of pipe diameter. The lower the inlet temperature is;the lower the annual pump power consumption is, and the higher the power efficiency would be. An instantaneous increase of the receiver outlet temperature would reduce the power efficiency. The plant control strategies suggest that the "south-in-north-out" arrangement of the heat receiver working fluid holds the highest power efficiency but lowest annual pump power consumption. The annual power generation increases effectively by introducing the hot and cold molten salt storage tanks. The annual power efficiency increases with the power plant capacity.

关键词： Electric power utilization

来源：评论

学校读者我要写书评

暂无评论

Thermodynamic Analysis and Optimization of Nuclear Closed Air Brayton Cycle 1

引用

23rd Pacific Basin Nuclear Conference, PBNC 2022

作者： Fang, Huawei Yi, Jingwei Zhang, Xiaoyu Liang, Tiebo Qian, Yiran Tang, Xin Chen, Weixiong Key Laboratory of Nuclear Reactor System Design Technology Nuclear Power Institute of China Sichuan Chengdu China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Shaanxi Xi’an China

ISBN: (数字)9789811988998

ISBN: (纸本)9789811988981

In order to improve the flexibility and adaptability of micro nuclear power systems, air is considered as an optional working fluid of nuclear Brayton cycle. It has ability to avoid shortage of working fluid under extreme conditions, and ensure the system operating with tight supply. Compared with the traditional open cycles, the closed cycle has advantages of higher cycle efficiency, smaller equipment size and higher power density. Few of closed air power cycle in nuclear power system has been studied by now. In this paper, cycle parameters were analyzed and designed, and optimal cycle performance was compared between cycle constructions. Four closed air Brayton cycles are proposed and modeled in EBSILON 1..0, including simple regenerative cycle (SRC), intercooling regenerative cycle (IRC), reheat regenerative cycle (RRC) and intercooling-reheat regenerative cycle (IRRC). Thermodynamic analysis of the key parameters is conducted, including pressure ratio, turbine inlet temperature, compressor inlet temperature and pressure. In addition, the genetic algorithm (GA) is applied for multi-parameters optimization for the maximal cycle efficiency. Result shows that with the increase of pressure ratio, the efficiency of SRC increases firstly and then decreases. With the increase of turbine inlet temperature, the pressure ratio corresponding to the maximal cycle efficiency increases gradually. Specific work gradually increases with pressure ratio. In higher turbine inlet temperature, the rising velocity of specific work is faster. Cycle efficiency increases with compressor inlet pressure, and this trend tend to be slower in high pressure region. With the increasing of compressor inlet pressure, optimal pressure ratio decreases and finally approaches to 2.0. The cycle minimal cycle pressure was selected as 6 MPa. Maximal efficiency and corresponding pressure ratio increase with turbine inlet temperature increasing and decrease with compressor inlet temperature increasing. Co

关键词： Air

来源：评论

学校读者我要写书评

暂无评论

Wake of a stationary sphere near a wall

引用

Huagong Xuebao/CIESC Journal 2019年第9期70卷 3300-3306页

作者： Li, Xing Bai, Bofeng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'anShaanxi710049 China

The flow characteristics of the sphere under uniform flow in a large space have been extensively studied, but the influence of the wall on the flow characteristics of the sphere is not clear. The wake of the particle is focused. Results show that there are three regimes of the sphere wake, which are steady wake, unsteady symmetric wake and unsteady asymmetric wake. If Re400, the vortex shedding is not symmetric and becomes chaotic as Reynolds number increases. © All Right Reserved.

关键词： Wakes

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：