检索结果-内蒙古大学图书馆

Research Square 2021年

作者： Lin, Yi-Nan Wang, Sheng-Kuan Chiou, Gwo-Jen Yang, Cheng-Ying Shen, Victor R.L. Su, Zhi Yang Department of Electronic Engineering Ming Chi University of Technology 84 Gongzhuan Rd. Taishan District New Taipei City243 Taiwan Department of Electrical Engineering Ming Chi University of Technology 84 Gongzhuan Rd. Taishan Dist. New Taipei243 Taiwan Department of Electrical Engineering National Formosa University Huwei Township Yunlin County 632 Taiwan Department of Computer Science University of Taipei 1 Ai-Kao W. Rd. Taipei City100 Taiwan Department of Computer Science and Information Engineering National Taipei University 151 University Rd. Sanxia District New Taipei City237 Taiwan Department of Information Management Chaoyang University of Technology 168 Jifeng E. Rd. Wufeng District Taichung City413 Taiwan

An IoT (Internet of Things) system for monitoring campus environmental parameters was successfully developed in this study. Various sensors were adopted in the front of IoT system for sensing air pollutants. The architecture of LongRange (LoRa) in Class C uses low-power and long-distance transmission technologies, which has been set up on the large campus, so that the terminal equipment can reach a balance between downlink latency and battery life, making it the best transmission communication protocol. In addition, this monitoring system uses the Petri net software tool to build a correct IoT platform based on the fundamental working processes, and to demonstrate the feasibility of the IoT system through simulation-based verification. Finally, the experimental results have shown that the IoT system for monitoring the campus environmental parameters achieves the goal of an acceptable data transmission success rate of more than 95%. Thus, it can facilitate the air quality trends for policy making as well as the hazardous prediction and prevention. © 2021, CC BY.

关键词： Internet of things

来源：评论

学校读者我要写书评

暂无评论

Creating a cost-effective network of operational resources for wireless networks

引用

AIP Conference Proceedings 2023年第1期2523卷

作者： Venkateshwara Prasad Bhadrappa Haralayya R. Aruna Jayashree A. Kethsy Prabavathy S. Selvarasu 1Department of Management Studies Sri Sairam Engineering College Chennai Tamil Nadu India. 2Department of Management Studies Lingaraj Appa Engineering College Bidar Karnataka India. 3Department of Electronics and Communication Engineering Rajalakshmi Institute of Technology Chennai Tamil Nadu India. 4Department of Computer Science and Engineering Karunya Institute of Technology and Sciences Coimbatore Tamil Nadu India. 5Department of Electronics and Communication Engineering Muthayammal Engineering College Tamil Nadu India

Wireless Sensor Networks (WSNs) gives human civilization a stunning and clever landscape. Connections between different sensors also strategies in the Internet of Things (IoT) contribute to high energy feasting. Study into liveliness conservation and methods of energy-saving are also important. Sustainability in an energy-efficient way due to the sensors' partial power is important for wireless sensors in an IoT network. This paper aims to analyze an IoT network of remote monitoring and access points. Wireless battery charging power delivery methods are getting more mature. The electrical power supply is operated by a charging car for wireless sensors. The data sharing of the IoT network situation is a minimization challenge to conserve electric energy. A three-stage process obtains the solution. A Reboot Artificial Bee Community (RABC) approach is proposed to solve the sub-problems of the data transfer model. The RABC approach has been shown to converge asymptotically to the optimization process. computer modelling demonstrates that energy consumption can be reduced with a strong, robust function using the proposed approach in the intentional network scenario.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Diamond based power electronic devices for aerospace application

引用

AIP Conference Proceedings 2022年第1期2615卷

作者： Harshit Shukla Tushar Rajvanshi Tanish Gupta Vipin Kumar Kumar Gaurav Deepak Kumar 1Department of Aerospace Engineering University of Petroleum & Energy Studies Dehradun India 2Department of Industrial and Information Engineering Universita degli Studi della Campanis Luigi Vanvitelli Aversa Italy 3Indian Institute of Technology Kharagpur India

Diamond properties should be easily compared to other wide band-gap semiconductor materials as diamond possesses unique properties. Diamond’s thermal conductivity of 22 W/cm K which is greater than many other materials. Effective electronic device operation could be easily obtained by single crystal diamond films as they promise better efficiency as compared to polycrystalline diamond, as it does not contain many grain boundaries, defects and stacking faults. Polycrystalline diamond films also have high demand in mechanical applications like cutting tools, polishing and grinding of optics etc. Diamond films could be easily grown with Chemical Vapour Deposition techniques (CVD) such as like plasma jet. Boron is present in higher concentration in thin films prepared with MWCVD, especially in (111)-oriented films making it holes carrying semiconductor where boron is the charge acceptor. For achieving superconductivity, it’s important for realizing concentration of carriers effectively high enough for inducing the insulator-to-metal transition. Diamond based devices for reducing the temperature of the devices’ dissipating heat is discussed here. Heat conducting substrate composed of diamond situated in the cooling device should be prepared in the thermal contact with heat dissipating devices which will spread out heat flows over a relatively large area during the operation. (Bi0.25Sb0.75)2Te3 based thermoelectric cooling material must be kept in close with the heat-conducting substrate which will pump heat on the application of electrical power into a second heat-conducting substrate which would be connected to the heat sink.

关键词：

来源：评论

学校读者我要写书评

暂无评论

The mathematical theory of Hughes’ model: a survey of results

arXiv

引用

arXiv 2023年

作者： Amadori, Debora Andreianov, Boris Francesco, Marco Di Fagioli, Simone Girard, Théo Goatin, Paola Markowich, Peter Pietschmann, Jan F. Rosini, Massimiliano D. Russo, Giovanni Stivaletta, Graziano Wolfram, Marie-Therese Department of Information Engineering Computer Science and Mathematics University of L’Aquila 67100 Italy Université de Tours Université d’Orléans Parc Grandmont Tours37200 France Peoples’ Friendship University of Russia RUDN University 6 Miklukho-Maklaya St Moscow117198 Russia Université Côte d’Azur Inria CNRS LJAD Sophia Antipolis France Mathematical and Computer Sciences and Engineering Division King Abdullah University of Science and Technology Thuwal23955-6900 Saudi Arabia Faculty of Mathematics University of Vienna Oskar-Morgenstern-Platz 1 Vienna1090 Austria Institute of Mathematics University of Augsburg Universitätsstr. 12a Augsburg86159 Germany Department of Mathematics and Computer Science University of Ferrara 44121 Italy Department of Management and Business Administration University "G. d’Annunzio" of Chieti Pescara65127 Italy Uniwersytet Marii Curie-Sklodowskiej Plac Marii Curie-Sklodowskiej 1 Lublin20-031 Poland Department of Mathematics and Computer Science University of Catania Viale Andrea Doria 6 Catania95125 Italy Mathematics Institute University of Warwick CoventryCV4 7AL United Kingdom

We provide an overview of the results on Hughes’ model for pedestrian movements available in the literature. The model consists of a nonlinear conservation law coupled with an eikonal equation. The main difficulty in developing a proper mathematical theory lies in the lack of regularity of the flux in the conservation law, which yields the possibility of non-classical shocks that are generated non-locally by the whole distribution of pedestrians. This is a possible reason behind the availability of existence results only on one-dimensional spatial domains, despite the model having a more natural setting in two spatial dimensions. After the first successful approaches to solving a regularised version of the model, researchers focused on the structure of the Riemann problem, which led to local-in-time existence results for Riemann-type data and paved the way for a WFT (Wave-Front Tracking) approach to the solution semigroup. In parallel, a DPA (Deterministic Particles Approximation) approach was developed in the spirit of follow-the-leader approximation results for scalar conservation laws. Beyond having proved to be powerful analytical tools, the WFT and the DPA approaches also led to interesting numerical results. However, only existence theorems on very specific classes of initial data (essentially ruling out non-classical shocks) have been available until very recently. A proper existence result using a DPA approach was proven not long ago in the case of a linear coupling with the density in the eikonal equation. Shortly after, a similar result was proven via a fixed point approach. We provide a detailed statement of the aforementioned results and sketch the main proofs. We also provide a brief overview of results that are related to Hughes’ model, such as the derivation of a dynamic version of the model via a mean-field game strategy, an alternative optimal control approach, and a localized version of the model. We also present the main numerical results within t

关键词： Wavefronts

来源：评论

学校读者我要写书评

暂无评论

Variant Plateau's Law in Atomically Thin Transition Metal Dichalcogenide Dome Networks

arXiv

引用

arXiv 2023年

作者： Liu, Boqing Yildirim, Tanju Lü, Tieyu Blundo, Elena Wang, Li Jiang, Lixue Zou, Hongshuai Zhang, Lijun Zhao, Huijun Yin, Zongyou Tian, Fangbao Polimeni, Antonio Lu, Yuerui School of Engineering College of Engineering and Computer Science The Australian National University CanberraACT2601 Australia 1-1 Namiki Ibaraki Tsukuba305-0044 Japan Department of Physics Institute of Theoretical Physics and Astrophysics Xiamen University Xiamen361005 China Dipartimento di Fisica Sapienza Università di Roma Roma00185 Italy School of Engineering and Information Technology University of New South Wales CanberraACT2600 Australia Centre for Catalysis and Clean Energy Griffith University Gold Coast Campus QLD4222 Australia State Key Laboratory of Integrated Optoelectronics School of Materials Science and Engineering Jilin Provincial International Cooperation Key Laboratory of High-Efficiency Clean Energy Materials Jilin University Changchun130012 China Research School of Chemistry College of Science The Australian National University CanberraACT2601 Australia Arc Centre of Excellence in Quantum Computation and Communication Technology Anu Node CanberraACT2601 Australia

Since its fundamental inception from soap bubbles, Plateau's law has sparked extensive research in equilibrated states. However, most studies primarily relied on liquids, foams or cellular structures, whereas its applicability has yet to be explored in nano-scale solid films. Here, we observed a variant Plateau's law in networks of atomically thin domes made of solid two-dimensional (2D) transition metal dichalcogenides (TMDs). Discrete layer-dependent van der Waals (vdWs) interaction energies were experimentally and theoretically obtained for domes protruding in different TMD layers. Significant surface tension differences from layer-dependent vdWs interaction energies manifest in a variant of this fundamental law. Meanwhile, the remarkable mechanical properties, gas impermeability and interlayer vdWs interaction energy of TMD films enable domes and the networks to sustain high gas pressure and exist in a fundamentally variant nature for several years. Our findings pave the way towards exploring variant discretised states with applications in opto-electro-mechanical devices. Copyright © 2023, The Authors. All rights reserved.

关键词： Surface tension

来源：评论

学校读者我要写书评

暂无评论

Properties of sustainable green concrete containing waste glass as eco-friendly aggregate: A review

引用

AIP Conference Proceedings 2022年第1期2660卷

作者： Shaker M. A. Qaidi Youkhana Zayia Dinkha Mohamed Moafak Arbili James H. Haido Bassam A. Tayeh 1Department of Civil Engineering College of Engineering University of Duhok Duhok Kurdistan Region-Iraq 2Department of Information Technology Choman Technical Institute Erbil Polytechnic University Erbil Kurdistan Region-Iraq 3Civil Engineering Department Faculty of Engineering Islamic University of Gaza Gaza Strip Palestine

The safe disposal of a large amount of waste glass (WG) in several countries has become a severe environmental issue. In contrast, concrete production consumes a large amount of natural resources and contributes to environmental greenhouse gas emissions. It was widely known that a lot of kinds of waste may be utilized rather than raw materials in the field of construction materials. However, for the wide use of waste in building construction, it is necessary to ensure that the characteristics of the resulting building materials are appropriate. Recycled glass waste is one of the most attractive waste materials that can be used to create sustainable concrete compounds. Therefore, researchers focus on the production of concrete and cement mortar in utilizing waste glass as an aggregate or as supplementary materials. In this article, the literature discussing the use of recycled glass waste in concrete as a partial or complete replacement for aggregates has been reviewed by focusing on the effect of recycled glass waste on the fresh and mechanical properties of concrete.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Noise bias compensation for reconstructed HDR images in two layer coding

IEEJ Transactions on Electronics, Information and Systems

引用

IEEJ Transactions on Electronics, information and Systems 2019年第12期139卷 1442-1451页

作者： Minewaki, Sayaka Hamzah, Fairoza Amira Binti Yoshida, Taichi Iwahashi, Masahiro Kiya, Hitoshi Department of Computer Science and Engineering National Institute of Technology Yuge College 1000 Kamijima-cho Ochi-gun Ehime794-2593 Japan Kyoto College of Graduate Studies for Informatics 7 Tanakamonzen-cho Sakyo-ku Kyoto606-8225 Japan Department of Computer and Network Engineering University of Electro-Communications 1-5-1 Chofugaoka Chofu Tokyo182-8585 Japan Department of Electrical Electronics and Information Engineering Nagaoka University of Technology 1603-1 Kamitomioka Nagaoka Niigata940-2188 Japan Department of Information and Communication Systems Faculty of System Design Tokyo Metropolitan University 6-6 Asahigaoka Hino Tokyo191-0065 Japan

We propose a two-layer coding method for HDR images with noise bias compensation (NBC). Although the mean of image noise is assumed to be zero originally, it becomes nonzero (that is, noise bias is present) after tone mapping, because of the nonlinearity of tone mapping. In the conventional two-layer coding, the reconstructed LDR image is decoded using a lossy encoder of a base layer that includes noise;the noise is included in an HDR image that is inverse tone mapped from a reconstructed LDR image with noise bias. We aim to improve the quality of reconstructed HDR images by compensating for noise bias. NBC classifies pixels in a noisy image into several subsets according to the pixel value after tone mapping, and compensates for the pixel value in each subset with a compensation value determined in advance. The compensation values are determined by using all pixel values in the LDR image that is input to the base layer, in addition to those in the HDR image that is inversely tone mapped from the reconstructed LDR image. We perform NBC following inverse tone mapping for the reconstructed LDR image. Experimental results show the effectiveness of the proposed method. © 2019 The Institute of Electrical Engineers of Japan.

关键词： Image denoising

来源：评论

学校读者我要写书评

暂无评论

Design and development of mini electric bike

引用

AIP Conference Proceedings 2022年第1期2527卷

作者： Dhiyaneswaran Jaganathan Rajender Gogu Balakumar Subramanian Harikumar Pallathadka Nithya Sabtharishi 1Department of Mechanical Engineering Sri Krishna College of Engineering and Technology Coimbatore - 641008 Tamil Nadu India 2Department of EEE Kakatiya Institute of Technology and Science Warangal Telangana India 3Electrical and Computer Engineering Arba Minch University Arba Minch Ethiopia 4Manipur International University Imphal Manipur India 5Department of Information Technology P.S.N.A College of Engineering and Technology Dindigul Tamilnadu India

The Concept and idea behind our E-bike is that due to the increase in usage of automobiles in the world, in turn it increases global warming and heat in our world. On behalf of this, the Indian government took a mission that by 2030, the nation will be transformed to a 100 percent e-mobility country. To achieve this humongous mission, first we need to achieve the factors like customers acceptability and desirability and the major factor cost-efficiency. In 2021, 15.2 million units of engine-based bikes were sold in India and the previous year 21 million units were sold. So, these bike owners tend to use these bikes around 10 years from the purchase, this shatters India’s 2030 mission. To overcome this, we come up with an idea that if we can convert the conventional engine bikes to electric bikes then we can displace the engines into e-bikes, which can make stupendous improvement in e-mobility usage in our country. Our bike is totally built and designed using old bikes, which makes it cost efficient as well as it retains every grain feature of bikes.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Efficient Algorithms for E-Healthcare to Solve Multiobject Fuse Detection Problem

引用

Journal of Healthcare engineering 2021年 2021卷

作者： Ahmad, Ijaz Ullah, Inam Khan, Wali Ullah Ur Rehman, Ateeq Adrees, Mohmmed S. Saleem, Muhammad Qaiser Cheikhrouhou, Omar Hamam, Habib Shafiq, Muhammad School of Pattern Recognition and Intelligent System Shenzhen Institute of Advance Technology Chinese Academy of Science Shenzhen China Changzhou Campus Changzhou213022 China School of Information Science and Engineering Shandong University Qingdao266071 China Department of Electrical Engineering Government College University Lahore54000 Pakistan College of Computer Science and Information Technology Al Baha University Al Baha Saudi Arabia College of CIT Taif University P.O. Box 11099 Taif21944 Saudi Arabia Faculty of Engineering Université de Moncton MonctonNBE1A3E9 Canada Sfax Tunisia Department of Information and Communication Engineering Yeungnam University Gyeongsan38541 Korea Republic of

Object detection plays a vital role in the fields of computer vision, machine learning, and artificial intelligence applications (such as FUSE-AI (E-healthcare MRI scan), face detection, people counting, and vehicle detection) to identify good and defective food products. In the field of artificial intelligence, target detection has been at its peak, but when it comes to detecting multiple targets in a single image or video file, there are indeed challenges. This article focuses on the improved K-nearest neighbor (MK-NN) algorithm for electronic medical care to realize intelligent medical services and applications. We introduced modifications to improve the efficiency of MK-NN, and a comparative analysis was performed to determine the best fuse target detection algorithm based on robustness, accuracy, and computational time. The comparative analysis is performed using four algorithms, namely, MK-NN, traditional K-NN, convolutional neural network, and backpropagation. Experimental results show that the improved K-NN algorithm is the best model in terms of robustness, accuracy, and computational time. © 2021 Ijaz Ahmad et al.

关键词： Object detection

来源：评论

学校读者我要写书评

暂无评论

Ontological representation of image processing methods for coronal hole material segmentation centered on physical restrains using multi-modal scheme

引用

AIP Conference Proceedings 2022年第1期2405卷

作者： R. Geetha T. Manimegalai S. Ramesh T. M. Amirthalakshmi 1Department of Information Technology Saveetha School of Engineering Saveetha Institute of Medical and Technical Sciences Saveetha University Chennai Tamil Nadu India 2Department of Computer Science and Engineering Saveetha School of Engineering Saveetha Institute of Medical and Technical Sciences Saveetha University Chennai Tamil Nadu India 3Department of Electronics and Communication Engineering Sri Shakthi Institute of Engineering and Technology Coimbatore-641062 Tamilnadu India 4Department of Electronics and Communicxation Engineering Rajalakshmi institute of technology Tamilnadu Chennai India

The manuscripts demonstrates the consequences on the way to advance in addition authenticate image processing techniques intended for deciding the finest physical models centered happening on solar image surveillances. This technique comprises of choosing the physical models centered proceeding on by means of coronal holes extracted from the images. Eventually, the objective is on the way to custom physical models in order to forecast geomagnetic storms. For coronal hole segmentation it is centered on physical restraints progressing a multi-modal scheme which customs segmentation maps commencing from three diversified methods in order to initialize a level-set technique which progresses the preliminary coronal hole segmentation towards the magnetic boundary. These coronal holes are clustered, mapped and validated. The suggested multi-modal segmentation technique vitally outstripped SegNet, U-net, Henney- Harvey, and FCN by giving precise boundary recognition. This suggested techniques gives 95.5% map classification precisely. An ontological representation IPCHSonto of the image processing method for Coronal Hole Segmentation have been built using protégé tool. This ontology is précised in formal languages by means of a well-defined semantics. Ontologies remain built upon a segmented understanding within a community.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：