检索结果-内蒙古大学图书馆

arXiv 2021年

作者： Kim, Hyunseung Na, Jonggeol Lee, Won Bo School of Chemical and Biological Engineering Seoul National University Gwanak-ro 1 Gwanak-gu Seoul08826 Korea Republic of Department of Chemical Engineering and Materials Science Graduate Program in System Health Science and Engineering Ewha Womans University Seoul03760 Korea Republic of

Discovering new materials better suited to specific purposes is an important issue in improving the quality of human life. Here, a neural network that creates molecules that meet some desired conditions based on a deep understanding of chemical language is proposed (Generative chemical Transformer, GCT). The attention mechanism in GCT allows a deeper understanding of molecular structures beyond the limitations of chemical language itself which cause semantic discontinuity by paying attention to characters sparsely. It is investigated that the significance of language models for inverse molecular design problems by quantitatively evaluating the quality of the generated molecules. GCT generates highly realistic chemical strings that satisfy both chemical and linguistic grammar rules. Molecules parsed from generated strings simultaneously satisfy the multiple target properties and vary for a single condition set. These advances will contribute to improving the quality of human life by accelerating the process of desired material discovery. Copyright © 2021, The Authors. All rights reserved.

关键词： Molecules

来源：评论

学校读者我要写书评

暂无评论

Analysis of reaction kinetics for thermal degradation of hemp residues

引用

AIP Conference Proceedings 2022年第1期2681卷

作者： Panuphong Mankeed Thossaporn Onsree Nakorn Tippayawong 1Graduate Program in Energy Engineering Faculty of Engineering Chiang Mai University Chiang Mai Thailand 2Department of Mechanical Engineering Faculty of Engineering Chiang Mai University Chiang Mai Thailand

Hemp is becoming one of the high-value economic crops in Thailand and many countries, in which it is cultivated for specific industrial applications, such as seeds, fibers, and medicinal products. After production processing, hemp hurds or residues obtained were approximately 2/3 w/w of starting raw material. They may be used as a renewable material or fuel via thermo-chemical conversion. Therefore, the objective of this work was to investigate thermo-chemical degradation and kinetic behaviors of hemp residues using thermogravimetry with non-isothermal conditions of 10-50 °C/min heating rates under an inert environment. From the results, it was found that hemp residues appeared to have three zones of thermal decomposition. With devolatilization, the residues were highly decomposed at temperatures between 200 and 400 °C for about 60% w/w of mass loss. By Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Kissinger free-model methods, the kinetic parameters were evaluated. The activation energies for the FWO and KAS were found to be an inverse function of conversion fractions, varying from 250 to 370 kJ/mol with the average values of 265.5 and 291.5 kJ/mol, respectively. While, for Kissinger, the activation energy was a constant of 282.3 kJ/mol.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Effects of MXenes (Ti₃C₂T_x) deposition by drop casting on the fretting wear of structural concrete

引用

Wear 2025年 570卷

作者： Silva, Cristiane Arpino Gonçalves, Margarete R.F. Rosenkranz, Andreas Hammes, Gisele Costa, Henara Lillian Universidade Federal de Pelotas Materials Science and Engineering Graduate Program Rua Gomes Carneiro 1 Porto RS Pelotas Brazil University of Chile Department of Chemical Engineering Biotechnology and Materials Avenida Beauchef 851 Santiago Chile Universidade Federal de Santa Catarina LabMat Rua Delfino Conti s/n. Bloco B Trindade SC Florianópolis Brazil Universidade Federal do Rio Grande School of Engineering Av. Itália km 8 Bairro Carreiros RS Rio Grande Brazil

In civil engineering, concrete is the most widely used material due to the availability of its components. Research on tribology of semi-rigid structural systems is important in civil engineering, as the initially rigid contact between concrete and metallic elements can generate micromovement, resulting in wear due to fretting and possible cracks. Recently, a new family of 2D metal carbide and nitride nanosheets called MXenes has stood out in tribological applications due to their layered structure, which provides self-lubricating and reinforcing properties, but they are costly and difficult to produce in large scale, making their use in civil engineering challenging, despite encouraging results from the literature. To overcome this, the present work proposed surface deposition of MXenes by drop-casting (involving very small amounts of Mxenes) to control fretting wear between concrete and steel. One and five applications were deposited from a dispersion at a concentration of approximately 0.4 mg/mL of MXenes in isopropanol. Fretting tests were carried out on concrete (with and without MXenes deposition) against steel counterbodies for a total stroke of 200 μm under different speeds (0.2 and 2 mm/s) and times (5 and 30 min). The results showed that the friction coefficients obtained in the fretting tests did not present a statistically significant difference when using Mxenes either as a reinforcement in the concrete or deposited by drop casting. The wear rates obtained from the fretting tests demonstrated that, for the lower speed, no significant difference could be confirmed for the modified concretes in either the 5 min or the 30 min tests. On the other hand, in the condition of speed = 2 mm/s and time = 5 min, the wear rate for one application of MXenes by dropcasting was lower than the reference. With a higher speed and 30-min test, a greater effect on the wear rate occurred, which may be the result of tribochemical effects in the contact. It is clear that, in t

关键词： Concrete Drop casting Fretting MXenes

来源：评论

学校读者我要写书评

暂无评论

Technology Roadmap for Flexible Sensors

引用

ACS NANO 2023年第6期17卷 5211-5295页

作者： Luo, Yifei Abidian, Mohammad Reza Ahn, Jong-Hyun Akinwande, Deji Andrews, Anne M. Antonietti, Markus Bao, Zhenan Berggren, Magnus Berkey, Christopher A. Bettinger, Christopher John Chen, Jun Chen, Peng Cheng, Wenlong Cheng, Xu Choi, Seon-Jin Chortos, Alex Dagdeviren, Canan Dauskardt, Reinhold H. Di, Chong-an Dickey, Michael D. Duan, Xiangfeng Facchetti, Antonio Fan, Zhiyong Fang, Yin Feng, Jianyou Feng, Xue Gao, Huajian Gao, Wei Gong, Xiwen Guo, Chuan Fei Guo, Xiaojun Hartel, Martin C. He, Zihan Ho, John S. Hu, Youfan Huang, Qiyao Huang, Yu Huo, Fengwei Hussain, Muhammad M. Javey, Ali Jeong, Unyong Jiang, Chen Jiang, Xingyu Kang, Jiheong Karnaushenko, Daniil Khademhosseini, Ali Kim, Dae-Hyeong Kim, Il-Doo Kireev, Dmitry Kong, Lingxuan Lee, Chengkuo Lee, Nae-Eung Lee, Pooi See Lee, Tae-Woo Li, Fengyu Li, Jinxing Liang, Cuiyuan Lim, Chwee Teck Lin, Yuanjing Lipomi, Darren J. Liu, Jia Liu, Kai Liu, Nan Liu, Ren Liu, Yuxin Liu, Yuxuan Liu, Zhiyuan Liu, Zhuangjian Loh, Xian Jun Lu, Nanshu Lv, Zhisheng Magdassi, Shlomo Malliaras, George G. Matsuhisa, Naoji Nathan, Arokia Niu, Simiao Pan, Jieming Pang, Changhyun Pei, Qibing Peng, Huisheng Qi, Dianpeng Ren, Huaying Rogers, John A. Rowe, Aaron Schmidt, Oliver G. Sekitani, Tsuyoshi Seo, Dae-Gyo Shen, Guozhen Sheng, Xing Shi, Qiongfeng Someya, Takao Song, Yanlin Stavrinidou, Eleni Su, Meng Sun, Xuemei Takei, Kuniharu Tao, Xiao-Ming Tee, Benjamin C. K. Thean, Aaron Voon-Yew Trung, Tran Quang Wan, Changjin Wang, Huiliang Wang, Joseph Wang, Ming Wang, Sihong Wang, Ting Wang, Zhong Lin Weiss, Paul S. Wen, Hanqi Xu, Sheng Xu, Tailin Yan, Hongping Yan, Xuzhou Yang, Hui Yang, Le Yang, Shuaijian Yin, Lan Yu, Cunjiang Yu, Guihua Yu, Jing Yu, Shu-Hong Yu, Xinge Zamburg, Evgeny Zhang, Haixia Zhang, Xiangyu Zhang, Xiaosheng Zhang, Xueji Zhang, Yihui Zhang, Yu Zhao, Siyuan Zhao, Xuanhe Zheng, Yuanjin Zheng, Yu-Qing Zheng, Zijian Zhou, Tao Zhu, Bowen Zhu, Ming Zhu, Rong Zhu, Yangzhi Zhu, Yong Zou, Guijin Chen, Xiaodong 08-03 Innovis Singapore 138634 Republic of Singapore Innovative Centre for Flexible Devices (iFLEX) School of Materials Science and Engineering Nanyang Technological University Singapore 639798 Singapore Department of Biomedical Engineering University of Houston Houston Texas 77024 United States School of Electrical and Electronic Engineering Yonsei University Seoul 03722 Republic of Korea Department of Electrical and Computer Engineering The University of Texas at Austin Austin Texas 78712 United States Microelectronics Research Center The University of Texas at Austin Austin Texas 78758 United States Department of Chemistry and Biochemistry California NanoSystems Institute and Department of Psychiatry and Biobehavioral Sciences Semel Institute for Neuroscience and Human Behavior and Hatos Center for Neuropharmacology University of California Los Angeles Los Angeles California 90095 United States Colloid Chemistry Department Max Planck Institute of Colloids and Interfaces 14476 Potsdam Germany Department of Chemical Engineering Stanford University Stanford California 94305 United States Laboratory of Organic Electronics Department of Science and Technology Campus Norrköping Linköping University 83 Linköping Sweden Wallenberg Initiative Materials Science for Sustainability (WISE) and Wallenberg Wood Science Center (WWSC) SE-100 44 Stockholm Sweden Department of Materials Science and Engineering Stanford University Stanford California 94301 United States Department of Biomedical Engineering and Department of Materials Science and Engineering Carnegie Mellon University Pittsburgh Pennsylvania 15213 United States Department of Bioengineering University of California Los Angeles Los Angeles California 90095 United States School of Chemistry Chemical Engineering and Biotechnology Nanyang Technological University Singapore 637457 Singapore Nanobionics Group Department of Chemical and Biological Engineering Monash University Clayton Australia 3800 Monash

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze continued...challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative

关键词： soft materials mechanics engineering flexible electronics conformable sensors bioelectronics human-machine interfaces body area sensor networks technology translation sustainable electronics

来源：评论

学校读者我要写书评

暂无评论

Synergetic Application of Alum Sludge and Sequential Extraction for Phosphorus Recovery from Sewage Sludge Char

SSRN

引用

SSRN 2023年

作者： Tiwari, Satya Brat Chin, Sze Yuet Veksha, Andrei Chan, Wei Ping Fei, Xunchang Lisak, Grzegorz Liu, Wen Lim, Teik-Thye Nanyang Environment and Water Research Institute Nanyang Technological University 1 Cleantech Loop CleanTech One 637141 Singapore School of Civil and Environmental Engineering Nanyang Technological University 50 Nanyang Avenue 639798 Singapore Interdisciplinary Graduate Program Nanyang Technological University Singapore Centre of High Field NMR Spectroscopy and Imaging Nanyang Technological University 21 Nanyang Link 637371 Singapore School of Chemistry Chemical Engineering and Biotechnology Nanyang Technological University 62 Nanyang Drive 637459 Singapore

Phosphorus (P) recovery from sewage sludge (SS) (or its ash/char) is challenging due to the presence of heavy metals (HMs) in SS. This study proposed the integration of SS, alum sludge (AS), sequential wet extraction, and pyrolysis for P recovery without simultaneous HM extraction. SS+AS mixture (P:Al molar ratio = 3:1) was first acid pretreated to obtain amended SS, then pyrolyzed, and finally, P was extracted from the char using an alkali. Pyrolysis was conducted at low (400˚C), medium (600˚C), and high (900˚C) temperatures. The highest alkaline P recovery efficiency was 88% from the amended SS char, while 32% from the unamended SS char (both prepared at 400˚C). Overall, the highest P recovery in the amended process was 48% higher than the unamended process despite 11% P loss during acidic pretreatment. Standards measurements and testing (SMT) protocol and solid-state NMR (31P and 27Al) analyses revealed that acidic pretreatment of SS with AS induced apatite phosphate (AP) to non-apatite inorganic phosphate (NAIP) conversion in SS. As NAIP is more soluble in alkali than AP and HMs, higher alkaline P recovery was achieved for amended SS char than unamended SS char, without HM contamination. However, higher pyrolytic temperatures impaired P recovery due to the immobilization of P in the char carbon matrix and the formation of recalcitrant P phases. These findings were corroborated by complementary characterization techniques such as XPS, XRD, and FTIR. Some major HMs in SS and AS were concentrated in char, except Zn, which partially volatilized above 600˚C. This study demonstrated the applicability of AS for extracting P from SS, offering a potential pathway for the synergetic management of sludge waste streams. © 2023, The Authors. All rights reserved.

关键词： Sewage sludge

来源：评论

学校读者我要写书评

暂无评论

Furfural hydrogenation into tetrahydrofurfuryl alcohol under ambient conditions: Role of Ni-supported catalysts and hydrogen source

引用

Industrial Crops and Products 2023年 195卷

作者： Matsagar, Babasaheb M. Li, Tsai-Ho Van Chi, Nguyen Hossain, Md. Shahriar A. Ahamad, Tansir Li, Yi-Pei Wu, Kevin C.-W. Department of Chemical Engineering National Taiwan University No. 1 Sec. 4 Roosevelt Road Taipei10617 Taiwan Faculty of Applied Technology School of Engineering and Technology Van Lang University 69/68 Dang Thuy Tram Binh Thanh District Ho Chi Minh City700000 Viet Nam The University of Queensland BrisbaneQLD4072 Australia Department of Chemistry College of Science King Saud University Saudi Arabia Molecular Science and Technology Program Taiwan International Graduate Program Academia Sinica No. 128 Sec. 2 Academia Road Taipei11529 Taiwan

Herein hydrogenation of biomass-derived furfural (FAL) catalyzed by Ni-supported catalysts and NaBH4 into tetrahydrofurfuryl alcohol (THFA) demonstrated in aqueous media under ambient reaction conditions. The activity of various Ni-supported catalysts (Ni/active carbon (Ni/AC);Ni/carbon black (Ni/CB);Ni/bone char (Ni/BC);Ni/C (derived from Ni-MOF)) compared for FAL hydrogenation. Ni/AC exhibited a high activity towards FAL hydrogenation into THFA (99% yield) compared to all other Ni-supported catalysts tested in this study. The results showed that hydrophobic nature of the AC support in Ni/AC, higher specific BET surface area, and smaller Ni particle size enhance the FAL hydrogenation proficiency towards THFA in aqueous media under milder reaction conditions. The FAL is efficiently hydrogenated with NaBH4 (hydrogen source). On the contrary, FAL is not hydrogenated in pure H2, suggesting a crucial role of NaBH4 in FAL hydrogenation. For the first time, the role of NaBH4 is investigated in detail for the hydrogenation of biomass-derived furans. The interaction of NaBO2 produced from NaBH4 with furfuryl alcohol (FOL) enhances the adsorption of the furan ring of FOL on the Ni surface via parallel geometry, resulting in efficient furan ring hydrogenation of FOL into THFA. © 2023 Elsevier B.V.

关键词： Biomass

来源：评论

学校读者我要写书评

暂无评论

Cyclodextrin-Modified Layered Double Hydroxide Thin-Film Nanocomposite Desalination Membrane for Boron Removal

SSRN

引用

SSRN 2023年

作者： Ee, Liang Ying Zhao, Qipeng Gao, Jie Lim, Chit Kai Xue, Kai Chin, Sze Yuet Li, Sam Fong Yau Chung, Tai-Shung Chen, Shing Bor Department of Chemical and Biomolecular Engineering College of Design and Engineering National University of Singapore 4 Engineering Drive 4 Singapore117585 Singapore Department of Chemistry College of Humanities and Sciences National University of Singapore 3 Science Drive 3 Singapore117543 Singapore Chemical Engineering Program Physical Science and Engineering Division King Abdullah University of Science and Technology Thuwal23955-6900 Saudi Arabia Centre of High Field NMR Spectroscopy and Imaging School of Physical and Mathematical Sciences College of Science Nanyang Technological University 21 Nanyang Link Singapore637371 Singapore NUS Environmental Research Institute National University of Singapore T-Lab Building 5A Engineering Drive 1 Singapore117411 Singapore Graduate Institute of Applied Science and Technology National Taiwan University of Science and Technology Taipei106335 Taiwan

The elimination of small and potentially toxic boron species in water is always a significant challenge for conventional membrane technologies. In this study, facile intercalation and functionalization of β-cyclodextrin (CD) onto layered double hydroxides (LDHs) have resulted in the formation of accessible hydroxyl functional groups and anions that exhibit strong sorption with boron. Through meticulous molecular design and optimization, the modified LDH possessing the maximum boron adsorption capacity of 96.1 mg g-1 was employed to fabricate a polyamide-based thin-film nanocomposite (TFN) membrane with a loading of 0.10 wt.%. This resultant membrane displayed a high salt rejection and water permeance of 99.4 % and 2.68 LMH bar-1 for brackish water, respectively, which can be attributed to the increased interlayer spacing of 1.67 nm and the thinner selective layer. The innovative TFN membrane also achieved a high boron rejection of 82.3 % against brackish water containing 2,000 mg L-1 NaCl and 15 mg L-1 B at pH 8. This pioneering study provides valuable insights into the design of brackish water reverse osmosis (BWRO) membranes, through the synergistic use of macrocyclic molecules and inorganic layered nanomaterials, that could potentially revolutionize water reuse and boron removal applications. © 2023, The Authors. All rights reserved.

关键词： Sodium chloride

来源：评论

学校读者我要写书评

暂无评论

Cold atmospheric plasma-enabled platelet vesicle incorporated iron oxide nano-propellers for thrombolysis

引用

Materials Today Bio 2023年 23卷 100876页

作者： Jheng, Pei-Ru Chiang, Chia-Che Kang, Jiunn-Horng Fan, Yu-Jui Wu, Kevin C.-W. Chen, Yan-Ting Liang, Jia-Wei Bolouki, Nima Lee, Jyh-Wei Hsieh, Jang-Hsing Chuang, Er-Yuan Graduate Institute of Nanomedicine and Medical Engineering Graduate Institute of Biomedical Materials and Tissue Engineering Institute of Biomedical Optomechatronics International Ph.D. Program in Biomedical Engineering School of Biomedical Engineering College of Biomedical Engineering Professional Master Program in Artificial Intelligence in Medicine College of Medicine Taipei Medical University Taipei11031 Taiwan Department of Physical Medicine and Rehabilitation Taipei Medical University Hospital Taipei Taiwan Institute of Biomedical Engineering & Nanomedicine National Health Research Institute Keyan Road Zhunan Miaoli City350 Taiwan Department of Chemical Engineering National Taiwan University No.1 Sec. 4 Roosevelt Rd Taipei10617 Taiwan Department of Plasma Physics and Technology Faculty of Science Masaryk University Brno Czech Republic Center for Plasma and Thin Film Technologies Ming Chi University of Technology New Taipei City Taiwan Department of Materials Engineering Ming Chi University of Technology New Taipei City Taiwan Cell Physiology and Molecular Image Research Center Taipei Medical University-Wan Fang Hospital Taipei11696 Taiwan

A new approach to treating vascular blockages has been developed to overcome the limitations of current thrombolytic therapies. This approach involves biosafety and multimodal plasma-derived theranostic platelet vesicle incorporating iron oxide constructed nano-propellers platformed technology that possesses fluorescent and magnetic features and manifold thrombus targeting modes. The platform is capable of being guided and visualized remotely to specifically target thrombi, and it can be activated using near-infrared phototherapy along with an actuated magnet for magnetotherapy. In a murine model of thrombus lesion, this proposed multimodal approach showed an approximately 80 % reduction in thrombus residues. Moreover, the new strategy not only improves thrombolysis but also boosts the rate of lysis, making it a promising candidate for time-sensitive thrombolytic therapy. © 2023 The Authors

关键词： Infrared devices

来源：评论

学校读者我要写书评

暂无评论

Exotic magnetism in perovskite KOsO3

arXiv

引用

arXiv 2024年

作者： Chen, Jie Li, Hongze Gainza, Javier Munoz, Angel Alonso, Jose A. Liu, Jue Chen, Yu-Sheng Belik, Alexei A. Yamaura, Kazunari He, Jiaming Li, Xinyu Goodenough, John B. Zhou, J.-S. Materials Science and Engineering Program University of Texas at Austin AustinTX78712 United States Instituto de Ciencia de Materiales de Madrid CSIC Cantoblanco MadridE-28049 Spain Universidad Carlos III Avenida Universidad 30 Leganés-MadridE-28911 Spain Neutron Scattering Division Oak Ridge National Laboratory Oak RidgeTN37830 United States NSF’s ChemMatCARS The University of Chicago IL60437 United States National Institute for Materials Science Namiki 1-1 Ibaraki Tsukuba305-0044 Japan Graduate School of Chemical Sciences and Engineering Hokkaido University North 10 West 8 Kita-ku Hokkaido Sapporo060-0810 Japan

A new perovskite KOsO3 has been stabilized under high-pressure and high temperature conditions. It is cubic at 500 K (Pm-3m) and undergoes subsequent phase transitions to tetragonal at 320 K (P4/mmm) and rhombohedral (R-3m) at 230 K as shown from refining synchrotron X-ray powder diffraction (SXRD) data. The larger orbital overlap integral and the extended wavefunction of 5d electrons in the perovskite KOsO3 allow to explore physics from the regime where Mott and Hund’s rule couplings dominate to the state where the multiple interactions are on equal footing. We demonstrate an exotic magnetic ordering phase found by neutron powder diffraction along with physical properties via a suite of measurements including magnetic and transport properties, differential scanning calorimetry, and specific heat, which provide comprehensive information for a system at the crossover from localized to itinerant electronic behavior. Copyright © 2024, The Authors. All rights reserved.

关键词： X ray powder diffraction

来源：评论

学校读者我要写书评

暂无评论

Ipmc Electromechanical Behavior Analysis with Reduced Platinum Layer Aiming Economy and Lower Waste Generation

SSRN

引用

SSRN 2022年

作者： Dardis, Thiago Petrilli Maffei Saccardo, Matheus C. Tozzi, Kaique A. de Blanco, Guilherme Eduardo O. Zuquello, Ariel G. Barbosa, Rafael Scuracchio, Carlos Henrique Gonçalves, Roger Federal University of Sao Carlos Graduate Program in Materials Science and Engineering Sao Carlos Brazil ESPCI Paris PSL Research University 10 Rue Vauquelin Paris75005 France Baalbek Management 16 Rue Debelleyme Paris75003 France Department of Chemical Sciences University of Padova Via Marzolo 1 Padova35131 Italy Univ. Grenoble Alpes Univ. Savoie Mont Blanc CNRS Grenoble INP LEPMI UMR5279 Grenoble38000 France Federal University of Sao Carlos Graduate Program in Chemistry Sao Carlos Brazil

Ionomeric Polymer-Metal Composites (IPMCs) are smart materials formed by an electroactive polymer membrane coated on both sides by noble metal electrodes. When an electrical stimulus is applied, an electric field is generated between electrodes, and solvated ions migrate inside the polymeric membrane, causing an internal pressure gradient and bending the device. Despite numerous advantages, it is exceedingly expensive to use noble metals, such as gold and platinum. In addition, the deposition process generates a large amount of toxic waste. Thus, in this paper, a Nafion®-based IPMC with a reduced platinum layer (PR-IPMC) was prepared and electromechanically tested, comparing it with a reference IPMC (R-IPMC). The analyses were performed under precise relative humidity (RH) control. Blocking force and current response were used to evaluate its performance, and the morphology of the Pt layer was evaluated through Scanning Electron Microscopy (SEM). The devices performed better when RH = 90%. The PR-IPMC presented a 60% thinner electrode layer. However, just 40% less blocking force compared to R-IPMC. Besides, the reduced amount of platinum complex used to obtain the device represents a saving of reactants and less waste generation, with satisfactory mechanical performance. © 2022, The Authors. All rights reserved.

关键词： Toxic materials

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：