Low or zero thermal expansion porous ceramics are required for several applications. In this work near zero thermal expansion porous ceramics were fabricated by using SiC and ZrW2O8 as positive and negative thermal ex...
详细信息
Low or zero thermal expansion porous ceramics are required for several applications. In this work near zero thermal expansion porous ceramics were fabricated by using SiC and ZrW2O8 as positive and negative thermal expansion materials, respectively, bonded by soda lime glass. The mixture of SiC, ZrW2O8 and soda lime glass was sintered by Pulsed Electric Current Sintering (PECS, or sometimes called Spark Plasma Sintering, SPS) at 700°C. Sintered samples with ZrW2O 8 particle size smaller than 25 μm have high thermal expansion coefficient, because ZrW2O8 has the reaction with soda lime glass to form Na2ZrW3O12 during sintering process. The reaction between soda lime glass and ZrW2O8 is reduced by increasing particle size of ZrW2O8. Sintered sample with ZrW2O8 particle size 45-90 μm shows near zero thermal expansion.
Two kinds of azo polysemicarbazides were prepared based on 3,3＇-azobis（benzoylhydrazide）（ABH） and two kinds of diisocyanates via solution *** structures were characterized by Fourier-transform infrared（FT-IR） t...
详细信息
Two kinds of azo polysemicarbazides were prepared based on 3,3＇-azobis（benzoylhydrazide）（ABH） and two kinds of diisocyanates via solution *** structures were characterized by Fourier-transform infrared（FT-IR） technique and elemental *** viscosities of the polymers were 0.32 and 0.29 dL/g and both could be dissolved in H2SO4 and polar organic *** gravimetric analysis（TGA） presented a multi-step degradation and a decomposition temperature range of 230-280 ℃.And photoisomerization of the azo polymers in solvent of N,N-dimethyl acetamide（DMAc） was confirmed by Ultraviolet-visible spectroscopy（UV-Vis）,suggested the isomerization appearing under the ultraviolet irradiation at 365 nm and recovering completely by visible light irradiation or kept in the *** electron microscopy（TEM） of polysemicarbazides before and after soaking in bovine serum albumin（BSA） solution confirmed the biocompatibility of azo polymers.
Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene （CLPS） as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysila...
详细信息
Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene （CLPS） as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysilane （VTES）, vinyl trimethoxysilane （VTMS） and γ-methacryloylpropyl trimethoxysilane （MPS）. The treated glass fibers were analyzed by fourier transform infrared spectroscopy （FTIR）. Dynamic mechanical thermal analysis （DMTA） and thermo-gravimetric analysis （TGA） were employed to investigate the effect of glass fibers surface modification on viscoelastic behavior and thermal properties. The morphology of fracture surfaces of various composites was observed by scanning electron microscopy （SEM）. The results revealed that these coupling agents were connected to the surfaces of the fibers by chemical bonding. Dynamic mechanical properties as well as thermal stability of the composites were improved considerablely, but to varying degrees depending on the fiber modification. The diversities of improvement of properties were attributed to the different interfacial adhesion between CLPS matrix and the glass fibers.
A facile and large-scale synthesis method to fabricate silver hollow microspheres with controllable morphologies and shell thickness is described using low-cost glass microspheres as templates. The method mainly invol...
详细信息
A facile and large-scale synthesis method to fabricate silver hollow microspheres with controllable morphologies and shell thickness is described using low-cost glass microspheres as templates. The method mainly involves two steps of the preparation of silver-coated glass microsphere core–shell particles by a controllable liquid reduced reaction of Ag[（NH3）2]＋ solution, which only produces silver nanoparticles anchored on the surface of the thiolated glass microsphere templates, and the removal of glass microspheres by wet chemical etching with HF solution. The products are well characterized by field emitted scanning electron microscopy （SEM）, transmitted electron microscopy （TEM）, X-ray photoelectron spectra （XPS）, X-ray diffraction （XRD） and energy dispersive X-ray （EDX） etc. The as-prepared core-shell particles and hollow particles have even and compact silver shells. The electromagnetic shielding coatings based on the silver hollow microspheres are demonstrated to have high conductivity, excellent shielding effectiveness and long durability, suggesting that the silver hollow microspheres obtained here are a novel light-weight electromagnetic shielding filler and will have extensive applications in the electromagnetic compatibility fields.
Zinc oxide hexagonal tubular crystals were synthesized by direct microwave heating from ZnO powders within 5 min without any metal catalysts or transport agents. ZnO source materials were evaporated from the high-temp...
详细信息
Zinc oxide hexagonal tubular crystals were synthesized by direct microwave heating from ZnO powders within 5 min without any metal catalysts or transport agents. ZnO source materials were evaporated from the high-temperature zone in an enclosure, and crystals were grown on the self-source substrate in an appropriate condition. The ZnO vapor formed in the high-temperature zone can deposit and grow on the powders located in the low-temperature zone to form crystals. The scanning electron microscopy （SEM） reveals that these products are hexagonal tube crystals with 80 ~rn in diameter and 250 μm in length, having a well faceted end and side surface. A possible growth mechanism and the influence of reaction temperature on the formation of crystalline ZnO hexagonal tubes were presented. The photoluminescence （PL） exhibits strong ultraviolet emission at room temperature, indicating the potential applications in short-wave light-emitting photonic devices.
A 3-D finite element model of two-stage thermoelectric generator based on low-temperature thermoelectric material bismuth-telluride and medium-temperature thermoelectric material skutterudites is established. Based on...
详细信息
ISBN:
(纸本)9781424480364
A 3-D finite element model of two-stage thermoelectric generator based on low-temperature thermoelectric material bismuth-telluride and medium-temperature thermoelectric material skutterudites is established. Based on the formal model, structural optimization of the two-stage thermoelectric generator is carried out. Results show that, reasonable design of the structure of two-stage thermoelectric generator can take full advantage of the characteristics of thermoelectric materials and effectively improve the performance of power generation. If contact resistance and all heat losses are neglected, the conversion efficiency of the two-stage thermoelectric generator can reach a value of 17.02%.
The performance of composite ceramic armor penetrated by rod projectile was studied by both numerical simulation and *** penetration and damage mechanisms of the projectile-armor after high-speed collision were also o...
详细信息
The performance of composite ceramic armor penetrated by rod projectile was studied by both numerical simulation and *** penetration and damage mechanisms of the projectile-armor after high-speed collision were also observed by high-speed *** experimental results showed that the ballistic performance of composite ceramic armor was highly affected by the density,hardness and toughness of bulletproof *** flow stress of the failed bulletproof ceramic is not only related to the pressure but also related to the strain *** phenomenological method based on Bodner-Partom ceramic model was introduced to derive the growth rate of *** simulation results show good agreement with the experimental results.
The effects of activated sintering technology of H2 atmosphere sintering on the microstructure and properties of W-15Cu alloy using ultrafine W-15Cu composite powder fabricated by spray drying calcining-continuous red...
详细信息
The effects of activated sintering technology of H2 atmosphere sintering on the microstructure and properties of W-15Cu alloy using ultrafine W-15Cu composite powder fabricated by spray drying calcining-continuous reduction technology were *** experimental results showed that W-15Cu alloy,consolidated by activated sintering technology of H2 atmosphere sintering for 1 h at 1300 ℃,with 98.5 % relative density,transverse rupture strength 1218 MPa,Vickers hardness HV0.5 378,average grain size about 1.2 μm and thermal conductivity 192 W/m·K,was *** comparison to the normal sintering process,activated sintering process to W-15Cu alloy could be achieved at lower sintering ***,better properties in activated sintered compacts were obtained,and activated sintering process resulted in finer microstructure and excellent properties.
The B4C-ZrB2-SiC ternary composites with super hard and high toughness were obtained by arc melting in argon atmosphere. Microstructures were observed by SEM, and phase compositions were analyzed by XRD. The hardness ...
详细信息
The B4C-ZrB2-SiC ternary composites with super hard and high toughness were obtained by arc melting in argon atmosphere. Microstructures were observed by SEM, and phase compositions were analyzed by XRD. The hardness and fracture toughness of ternary composites are 28GPa and 4.5MPa-m1/2. The eutectic mole composition is 0.39B4C-0.25ZrB2-0.36SiC, and the eutectic lamellar microstructure is composed of B4C matrix with the lamellar ZrB2 and SiC grains.
暂无评论