检索结果-内蒙古大学图书馆

Topology design and manufacturing of enhanced current-attenuating solid-state characteristic DC circuit breaker based on cascade structure

引用

Journal of Power Electronics 2025年 1-13页

作者： Ding, Can Ji, Yinbo Yuan, Zhao Shi, Yiji College of Electrical Engineering and New Energy China Three Gorges University Yichang China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan China

Solid-state characteristic DC circuit breakers (SSDCCB) are crucial devices in ensuring the efficient and the stable operation of low-voltage DC (LVDC) distribution networks. A novel topology for grid applications is proposed in this paper, termed the Cascaded Attenuating current Solid-state characteristic DC Circuit Breaker (CASSCB), which is an enhancement based on traditional SSCBs. This innovation introduces the primary current-attenuating branch to the front end of the diversion branch, which is composed of sub-modules cascaded in series. The primary current-attenuating circuit, which is established by combining current-attenuating reactance with resistance in parallel, effectively curbs the second-stage rise rate and the peak value of incident currents, thereby mitigating the impact on the grid. In the sub-modules, cost-effective SCRs are strategically used in place of high-priced IGBTs for breaking and voltage division, leading to a significant reduction in overall costs. A thorough analysis of the topology principles of the CASSCB is conducted alongside theoretical derivations. In addition, methods are outlined for optimizing the selection of key component parameters. To further verify its performance, a validation model was established using MATLAB/Simulink tools, and a small-scale experimental prototype is developed. Results affirm the feasibility and the effectiveness of the CASSCB topology. © The Author(s) under exclusive licence to The Korean Institute of Power Electronics 2025.

关键词： Timing circuits

来源：评论

学校读者我要写书评

暂无评论

Influence of 3D helical magnetic perturbations on runaway electron generation in J-TEXT tokamak

引用

Plasma Science and technology 2025年第3期27卷 36-44页

作者： Wei YAN Guinan ZOU Zhongyong CHEN You LI Jiangang FANG Zhifang LIN Zhonghe JIANG Nengchao WANG Bo RAO Yangbo LI Zhengkang REN Chuanxu ZHAO Yu ZHONG Fanxi LIU Yinlong YU Zisen NIE Xun ZHOU Yuan SHENG Yuwei SUN Song ZHOU Xiaoqing ZHANG Zhoujun YANG Zhipeng CHEN Yonghua DING the J-TEXT Team State Key Laboratory of Advanced Electromagnetic Technology International Joint Research Laboratory of Magnetic Confinement Fusion and Plasma PhysicsSchool of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074People’s Republic of China School of Electrical Engineering&Automation Jiangsu Normal UniversityXuzhou 221116People’s Republic of China 不详

A large number of runaway electrons(REs)generated during disruption can cause significant damage to next-generation large-scale *** influence of three-dimensional(3D)helical magnetic perturbations on the suppression of RE generation was explored using a set of 3D helical coils in J-TEXT tokamak,which can excite m/n=-2/2 helical magnetic *** evidence shows that the-2/2 magnetic perturbations caused by the opposite coil current direct plasma toward the high-field side,simultaneously enhancing the magnetic fluctuations,which would enhance the radial loss of REs and even prevent RE *** the other hand,-2/2 magnetic perturbations can also reduce the cooling time during the disruption phase and generate a population of high-energy REs,which can interact with high-frequency magnetic fluctuations and in turn suppress RE *** critical helical coil current was found to correlate with electron density,requiring higher coil currents at higher *** to the statistical analysis of RE generation at different electron densities,the applied-2/2 magnetic perturbations can increase the magnetic fluctuations to the same level at lower electron densities,which can decrease the threshold electron density for RE *** will be beneficial for RE mitigation in future large tokamak devices.

关键词： 3D helical magnetic perturbations runaway electron J-TEXT tokamak

来源：评论

学校读者我要写书评

暂无评论

Enhancing solid-state lithium metal battery performance via indium-based modification of electrolytes and lithium metal surfaces:mechanistic insights and optimization

引用

Science China Chemistry 2025年第3期68卷 1144-1158页

作者： Zhongkai Wu Chen Liu Ziling Jiang Lin Li Siwu Li Chaochao Wei Qiyue Luo Xia Chen Long Zhang Shijie Cheng Chuang Yu State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China School of Chemistry and Chemical Engineering Huazhong University of Science and TechnologyWuhan 430074China Interdisciplinary Research Center of Smart Sensors Academy of Advanced Interdisciplinary ResearchXidian UniversityXi’an 710126China College of Physics and Energy Fujian Normal UniversityFuzhou 350117China

Argyrodite-based solid-state lithium metal batteries exhibit significant potential as next-generation energy storage ***,their practical applications are constrained by the intrinsic poor stability of argyrodite towards Li metal and exposure to air/***,an indium-involved modification strategy is employed to address these *** optimized doping yields a high Li-ion conductivity of 7.5 mS cm^(-1)for Li_(5.54)In_(0.02)PS_(4.47)O_(0.03)Cl_(1.5)electrolyte,accompanied by enhanced endurance against air/moisture and bare Li *** retains 92.0%of its original conductivity after exposure to air at a low dew point of-60℃in dry ***,a composite layer comprising Li-In alloy and Li F phases is generated on the surface of lithium metal anode via the reaction between InF_(3)and molten *** layer effectively mitigates Li dendrite growth by creating a physical barrier from the robust LiF phase,while the Li-In alloy induces uniform Li-ion deposition and accelerates Li transport dynamics across the interphase between the solid electrolyte/Li ***,the In-doped electrolyte facilitates the in-situ generation of Li-In alloy within its voids,reducing local current density and further inhibiting lithium dendrite ***,the combination of the Li_(5.54)In_(0.02)PS_(4.47)O_(0.03)Cl_(1.5)electrolyte and the InF_(3)@Li anode provides exceptional electrochemical performances in both symmetric cells and solid-state lithium metal batteries across different operating ***,the LiNbO_(3)@LiNi_(0.7)Co_(0.2)Mn_(0.1)O_(2)/Li_(5.54)In_(0.02)PS_(4.47)O_(0.03)Cl_(1.5)/InF_(3)@Li cell delivers a high discharge capacity of 167.8 mAh g^(-1)at 0.5 C under 25℃and retains 80.0%of its initial value after 400 *** work offers a viable strategy for designing functional interfaces with enhanced stability for sulfide-based solid-state lithium batteries.

关键词： Li_(5.5)PS_(4.5)Cl_(1.5)solid electrolyte In_(2)O_(3)dual-doping InF_(3)surface-modification chemical/electrochemical stability electrochemical performance

来源：评论

学校读者我要写书评

暂无评论

Manipulating Interfacial Stability via Preferential Absorption for Highly Stable and Safe 4.6 V LiCoO_(2) Cathode

引用

Nano-Micro Letters 2025年第8期17卷 95-110页

作者： Long Chen Xin He Yiqing Chen Youmin Hou Yujie Zhang Kangli Wang Xinping Ai Yuliang Cao Zhongxue Chen Key Laboratory of Hydraulic Machinery Transients Ministry of EducationSchool of Power and Mechanical EngineeringWuhan UniversityWuhan 430072People’s Republic of China State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074People’s Republic of China Hubei Key Laboratory of Electrochemical Power Sources College of Chemistry and Molecular SciencesWuhan UniversityWuhan 430072People’s Republic of China

Elevating the upper cutoff voltage to 4.6 V could effec-tively increase the reversible capacity ofLiCoO_(2)(LCO)cathode,whereas the irreversible structural transition,unstable electrode/electrolyte interface and potentially induced safety hazards severely hinder its industrial *** a robust cathode/electrolyte interface film by electrolyte engineer-ing is one of the efficient approaches to boost the performance of high-voltage LCO(HV-LCO);however,the elusive interfacial chemistry poses substantial challenges to the rational design of highly compatible ***,we propose a novel electrolyte design strategy and screen proper solvents based on two factors:highest occupied molecular orbital energy level and LCO absorption ***(2,2,2-trifluoroethyl)phosphate is determined as the optimal solvent,whose low defluorination energy barrier significantly promotes the construction of LiF-rich cathode/electrolyte interface layer on the surface of LCO,thereby eventually suppresses the phase transition and enhancesLi+diffusion *** rationally designed electrolyte endows graphite||HV-LCO pouch cells with long cycle life(85.3%capacity retention after 700 cycles),wide-temperature adaptability(-60–80℃)and high safety(pass nail penetration).This work provides new insights into the electrolyte screening and rational design to constructing stable interface for high-energy lithium-ion batteries.

关键词： Electrolyte design LiF-rich interface Wide-temperature High-safe 4.6 V LCO

来源：评论

学校读者我要写书评

暂无评论

Multi-objective Optimization Method of arc Armature Based on Anti-Transition 19th

Multi-objective Optimization Method of arc Armature Based on...

引用

19th Annual Conference of China Electrotechnical Society, ACCES 2024

作者： Gu, Anbang Xia, Shengguo Key Laboratory of Pulsed Power Technology Ministry of Education Huazhong University of Science and Technology Wuhan China State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology Wuhan China

ISBN: (纸本)9789819608966

Three optimization objectives are proposed to suppress transition during the armature launching process: the deviation rate of the current density distribution on the armature rail’s contact surface under steady-state current, the deviation rate of the current density distribution on the throat’s surface under steady-state current, and the deviation degree of the overfill contact pressure’s center of action. The NSGA-2 multi-objective optimization algorithm is used to optimize the armature structure. Firstly, the random response surface of the optimization objectives is established in a large range of armature geometrical parameters, and then the range of values of armature geometrical parameters is obtained according to the limitations of the armature structure in the actual problem, and then the optimization of the armature structure is carried out and the optimal compromise solution is screened out in this range. The simulation results show that the optimized armature, compared with the benchmark armature, has a more centered distribution of the overfill contact pressure on the contact surface, smaller current peaks on the contact surface of the armature rails during the launching process, and lower maximum temperature at the throat, which indicates that the optimized armature is more capable of suppressing the armature start-up phase transition, the magnetic saw of the throat transition, and the current falling-edge phase transition. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Multiobjective optimization

来源：评论

学校读者我要写书评

暂无评论

A Real-Time Junction Temperature Estimating Method for SiC MOSFET Based on the Turn-on Drain-Source Current Oscillation

A Real-Time Junction Temperature Estimating Method for SiC M...

引用

International Conference of Electrical, Electronic and Networked Energy Systems, EENES 2024

作者： Yang, Fengming Liang, Lin Zhang, Ziyang State Key Laboratory of Advanced Electromagnetic Technology Power Electronics and Energy Management Key Laboratory Ministry of Education of China School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430070 China

ISBN: (纸本)9789819618514

Online junction temperature (Tj) measurement is critical for SiC MOSFET reliability evaluation health management and life prediction. In order to make the tradeoff between availability, simplicity, as well as accuracy, this article demonstrates a real-time junction temperature estimating method by selecting the current oscillation peak of drain source (Ioscpeak) during turn-on transient as a temperature sensitive electrical parameter (TSEP). The theoretical and simulation analysis results show that the Ioscpeak is available to be a TSEP. Then, the model of Ioscpeak and Tj is derived through fitting curve based the experimental results. The voltage and load current dependency of proposed method are also discussed. The experimental results demonstrate that the bus voltage level has a negligible influence to the relationship between the Ioscpeak and the Tj, the value of Ioscpeak is increasing with the increment of current level at the specific temperature. The sensitivity of proposed method has a satisfactory performance of junction temperature estimation. The estimation circuit of proposed method has a simplicity hardware with low cost and easy to be implanted with gate drive of SiC MOSFET. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： MOSFET devices

来源：评论

学校读者我要写书评

暂无评论

Al-F co-doping towards enhanced electrolyte-electrodes interface properties for halide and sulfide solid electrolytes

引用

Chinese Chemical Letters 2025年第1期36卷 610-617页

作者： Han Yan Jingming Yao Zhangran Ye Qiaoquan Lin Ziqi Zhang Shulin Li Dawei Song Zhenyu Wang Chuang Yu Long Zhang College of Physics and Energy Fujian Normal UniversityFuzhou 350117China Clean Nano Energy Center State Key Laboratory of Metastable Materials Science and TechnologyYanshan UniversityQinhuangdao 066004China Tianjin Key Laboratory for Photoelectric Materials and Devices School of Materials Science and EngineeringTianjin University of TechnologyTianjin 300384China Guilin Electrical Equipment Scientific Research Institute Co. Ltd.Guilin 541004China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430000China

All-solid-state Li batteries(ASSLBs)using solid electrolytes(SEs)have gained significant attention in recent years considering the safety issue and their high energy *** these advantages,the commercialization of ASSLBs still faces challenges regarding the electrolyte/electrodes interfaces and growth of Li *** doping is an effective and direct method to enhance the performance of ***,we report an Al-F co-doping strategy to improve the overall properties including ion conductivity,high voltage stability,and cathode and anode ***,the Al-F co-doping enables the formation of a thin Li-Al alloy layer and fluoride interphases,thereby constructing a relatively stable interface and promoting uniform Li *** similar merits of Al-F co-doping are also revealed in the Li-argyrodite *** assembled with these optimized electrolytes gain good electrochemical performance,demonstrating the universality of Al-F co-doping towards advanced SEs.

关键词： Solid electrolytes Li halides Li_(2)ZrCl_(6) Li argyrodites Fluorine doping

来源：评论

学校读者我要写书评

暂无评论

Novel Inertia Control Method with Phase-Locked Error Feedforward in PLL for DFIG-Based WTs

Novel Inertia Control Method with Phase-Locked Error Feedfor...

引用

International Conference of Electrical, Electronic and Networked Energy Systems, EENES 2024

作者： Yu, Jiawei Zhu, Yihua Zhou, Yini Hu, Bo Li, Zheyu Li, Xiaoyu State Key Laboratory of HVDC Electric Power Research Institute China Southern Power Grid Guangzhou510663 China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819620418

The large-scale access of wind power causes a significant reduction in the inertia of the power system, seriously threatening the security and stability of the system frequency. Inertia control methods based on the optimized PLLs provide a solution to the low inertia problem of doubly-fed inductance generator (DFIG)-based wind turbines (WTs), but they still suffer from poor dynamic performance and obvious phase-locked error in steady state. For this reason, a novel inertia control method for DFIG-based WTs is proposed in this paper to support the system frequency with better performance in all aspects. Firstly, an equivalent inertia model is deduced considering the dynamic of control and the reason why modifying PLL can realize inertia response of WT is analyzed. Then, the existing inertia control methods based on optimized PLL is introduced and a novel inertia control method with phase-locked error feed-forward in PLL (pefPLL) is proposed. After that, the inertia characteristics, dynamic performance, and steady state performance of pefPLL and other PLLs are compared. Finally, the superiority of the novel inertia control method with pefPLL is verified by simulations. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Wind turbines

来源：评论

学校读者我要写书评

暂无评论

Analysis of Three-Phase Short-Circuit Electromotive Force on Six Vacuum-Break Parallel-Type Generator Outlet Circuit Breakers 11th

Analysis of Three-Phase Short-Circuit Electromotive Force on...

引用

11th Frontier Academic Forum of Electrical engineering, FAFEE 2024

作者： Sun, Likang Chen, Lixue He, Yinghui Zou, Xinyang Li, Yingzhuo State Key Laboratory of Advanced Electromagnetic Technology Huazhong University of Science and Technology Wuhan430074 China Key Laboratory of Pulsed Power Technology Ministry of Education School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819787791

Currently, vacuum type generator outlet circuit breaker dominates the large-capacity generator circuit breaker. However, due to the large short-circuit current at the generator outlet end, the generator outlet circuit breaker needs to bear a great short-circuit electromotive force, thus affecting its dynamic stability. In this paper, COMSOL is used to construct a model of a six vacuum break parallel type outlet circuit breaker for the protection of a megawatt-level generator. Based on Maxwell's electromagnetic theory, the transient calculation of three-phase short-circuit electromotive force under different phases is carried out for the generator outlet vacuum circuit breaker, and the great values of short-circuit electromotive force under different phases are obtained for each phase. The results show that the main component of the short-circuit electromotive force is the electromotive force in the y-direction. And based on the maximum transient electromotive force, the influence of the material on the short-circuit electromotive force is studied, which provides theoretical support for the analysis of the short-circuit electromotive force of the generator outlet circuit breaker and the optimized design of the shell. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Electric shielding

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on Electrode Erosion Process with High Current Vacuum Arc 19th

Experimental Study on Electrode Erosion Process with High Cu...

引用

19th Annual Conference of China Electrotechnical Society, ACCES 2024

作者： Peng, Ruochen Li, Yilong Zhao, Yuan Chen, Lixue Ya, Penglong Lyu, Tianmao State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science & Technology Wuhan China School of Electrical and Electronic Engineering Huazhong University of Science & Technology Wuhan China Key Laboratory of Pulsed Power Technology Huazhong University of Science & Technology Ministry of Education China

ISBN: (纸本)9789819613861

During the breaking process, the erosion of anode contact greatly affects the result of high current vacuum breaking. Therefore, it is important to study the forming and transforming process of anode modes for improving the breaking performance and life of vacuum circuit breaker. The cup axial magnetic field (AMF) contacts is widely used in vacuum trigger switch and vacuum on-load tap changer. In order to study the vacuum arc characteristics and anode mode change of cup AMF contacts under high current density, the 40 mm diameter cup AMF contacts with six slots is observed and studied by experimental means under the gap distance of 6 mm and 10 mm. In this paper, the arc current-voltage characteristics, vacuum arc shape and surface erosion of contact are analyzed. The analysis results show that the larger the contact gap, the larger the arc voltage, the smaller the arc anode mode threshold current and the more serious the contact erosion degree. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Anodes

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：