检索结果-内蒙古大学图书馆

Speed Harmonic based Saturation Free Inductance Modeling and Estimation of Interior PMSM Using Measurements Under One Load Condition

引用

CES Transactions on electrical Machines and systems 2025年第1期9卷 91-99页

作者： Guodong Feng Yuting Lu Zhe Tong Beichen Ding Guishan Yan Chunyan Lai the School of Intelligent Systems Engineering Sun Yat-sen UniversityShenzhenChina the School of Advanced Manufacturing Sun Yat-sen University the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai) China the Department of Electrical and Computer Engineering Concordia UniversityQCCanada

For permanent magnet synchronous machines(PMSMs),accurate inductance is critical for control design and condition *** to magnetic saturation,existing methods require nonlinear saturation model and measurements from multiple load/current conditions,and the estimation is relying on the accuracy of saturation model and other machine parameters in the *** harmonic produced by harmonic currents is inductance-dependent,and thus this paper explores the use of magnitude and phase angle of the speed harmonic for accurate inductance *** estimation models are built based on either the magnitude or phase angle,and the inductances can be from d-axis voltage and the magnitude or phase angle,in which the filter influence in harmonic extraction is considered to ensure the estimation *** inductances can be estimated from the measurements under one load condition,which is free of saturation ***,the inductance estimation is robust to the change of other machine *** proposed approach can effectively improve estimation accuracy especially under the condition with low current *** and comparisons are conducted on a test PMSM to validate the proposed approach.

关键词： PMSM Inductance estimation Speed harmonic High frequency signal injection

来源：评论

学校读者我要写书评

暂无评论

A Novel Technology for Semiautomatic and Automatic Stem–Stake Coupling of Seedlings and Plants

IEEE Transactions on AgriFood Electronics

引用

IEEE Transactions on AgriFood Electronics 2025年第1期3卷 254-262页

作者： Shirzi, Moteaal Asadi Kermani, Mehrdad R. Western University Advanced Robotics and Mechatronic Systems Laboratory Electrical and Computer Engineering Department LondonN6A 5B9 Canada Western University Department of Electrical and Computer Engineering LondonN6A 3K7 Canada Advanced Robotics and Mechatronic Systems Laboratory LondonN6A 5B9 Canada

This article introduces a novel mechatronic system for coupling the stems of seedlings and plants to wooden stakes or ropes, a crucial process for supporting them during growth, transportation, and fruiting in plant propagation facilities and greenhouses. The stem–stake coupling device utilizes interconnected mechanisms and an impedance control method to adjust motor torque and speed, shaping metallic wire into clips of various shapes and dimensions, effectively securing plant stems to stakes or ropes. In a robotic system, a claw-shaped arm mechanism, a stereo camera, and real-time vision techniques are integrated into the stem–stake coupling device to identify the optimal coupling point and automate the coupling task. This innovation addresses the labor-intensive task of manual coupling, offering a scalable solution for growers through handheld devices or fully automated robotic systems. In the context of increasing labor shortages and rising costs, the technology offers a sustainable and efficient alternative with significant potential to enhance operational efficiency in greenhouses and propagation facilities. © 2023 IEEE.

关键词： Seed

来源：评论

学校读者我要写书评

暂无评论

Edge-Driven Industrial Computing Power Networks: Digital Twin-Empowered Service Provisioning by Hybrid Soft Actor-Critic

引用

IEEE Transactions on Vehicular Technology 2025年第5期74卷 8095-8109页

作者： Zhang, Long Song, Deng-Ao Zhang, Hongliang Tian, Ni Zhuang, Zirui Niyato, Dusit Han, Zhu Hebei University of Engineering School of Information and Electrical Engineering Handan056038 China Peking University State Key Laboratory of Advanced Optical Communication Systems and Networks School of Electronics Beijing100871 China Beijing University of Posts and Telecommunications State Key Laboratory of Networking and Switching Technology Beijing100876 China Nanyang Technological University College of Computing and Data Science 639798 Singapore University of Houston Department of Electrical and Computer Engineering HoustonTX77004 United States Kyung Hee University Department of Computer Science and Engineering Seoul446-701 Korea Republic of

With the proliferation of data-intensive industrial applications, the collaboration of computing powers among standalone edge servers is vital to provision such services for smart devices. In this paper, we propose an edge-driven industrial computing power network (CPN) by orchestrating the computing and network resources of edge servers through the centralized resource scheduling and decentralized task computing. However, efficient task offloading and collaborative processing is challenging, which requires higher degrees of network automation and intelligence. Therefore, we incorporate digital twins (DTs) into the edge-driven CPN architecture, where the DTs are created as the digital replicas to assist both the computation offloading and collaborative processing. A joint optimization problem of the computing power assignment, service association, task partition, and transmit power control is formulated for maximizing the system average weighted utility. Due to the temporal-spatial variability of tasks and the resulted dynamic environment, we transform the original problem as a Markov decision process aiming at maximizing the long-term average weighted utility. To efficiently handle the high-dimensional discrete-continuous action space, a hybrid soft actor-critic based deep reinforcement learning algorithm is developed for optimizing the joint design. Simulation results validate the superiority of our proposed algorithm over the benchmarks, showing the significant gains obtained by integrating DTs into the edge-driven CPN. © 1967-2012 IEEE.

关键词： Markov processes

来源：评论

学校读者我要写书评

暂无评论

RGB-Based Category-Level Object Pose Estimation via Depth Recovery and Adaptive Refinement

引用

IEEE Robotics and Automation Letters 2025年第6期10卷 5377-5384页

作者： Yang, Hui Sun, Wei Liu, Jian Zheng, Jin Zeng, Zhiwen Mian, Ajmal Hunan University National Engineering Research Center for Robot Visual Perception and Control Technology College of Electrical and Information Engineering Changsha410082 China Hunan University State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Changsha410082 China Central South University School of Architecture and Art Changsha410082 China University of Western Australia Department of Computer Science and Software Engineering CrawleyWA6009 Australia

Category-level pose estimation methods have received widespread attention as they can be generalized to intra-class unseen objects. Although RGB-D-based category-level methods have made significant progress, reliance on depth image limits practical application. RGB-based methods offer a more practical and cost-effective solution. However, current RGB-based methods struggle with object geometry perception, leading to inaccurate pose estimation. We propose depth recovery and adaptive refinement for category-level object pose estimation from a single RGB image. We leverage DINOv2 to reconstruct the coarse scene-level depth from the input RGB image and propose an adaptive refinement network based on an encoder-decoder architecture to dynamically improve the predicted coarse depth and reduce its gap from the ground truth. We introduce a 2D–3D consistency loss to ensure correspondence between the point cloud obtained from depth projection and the objects in the 2D image. This consistency supervision enables the model to maintain alignment between the depth image and the point cloud. Finally, we extract features from the refined point cloud and feed them into two confidence-aware rotation regression branches and a translation and size prediction residual branch for end-to-end training. Decoupling the rotation matrix provides a more direct representation, which facilitates parameter optimization and gradient propagation. Extensive experiments on the REAL275 and CAMERA25 datasets demonstrate the superior performance of our method. Real-world estimation and robotic grasping experiments demonstrate our model robustness to occlusion, clutter environments, and low-textured objects. Our code and robotic grasping video are available at DA-Pose. © 2016 IEEE.

关键词： Depth perception

来源：评论

学校读者我要写书评

暂无评论

Artificial Intelligence Techniques With Digital Twin for Fault Diagnosis in Interconnected systems: A Review

引用

IEEE Access 2025年 13卷 91860-91874页

作者： Imen Nakti Majdi Mansouri Rami Al-Hmouz Atef Khedher Laboratory of Advanced Technology and Intelligent Systems ENISO University of Sousse Sousse Tunisia Department of Electrical and Computer Engineering College of Engineering Sultan Qaboos University Muscat Oman

As industrial systems become more complex and interconnected, diagnosing faults accurately and in real time has become increasingly challenging. This paper explores how combining artificial intelligence with digital twin technology can address these challenges. We focus on developing hybrid Artificial intelligence models that leverage diverse data sources to enhance fault detection and diagnosis, enabling secure and distributed diagnostics. Digital twins, virtual models of physical systems, are shown to enhance predictive maintenance and decision-making by providing real-time system insights. What sets our work apart is the way we integrate these technologies to create scalable, adaptive, and context-aware diagnostic solutions. We demonstrate the potential of this approach across applications such as smart grids, manufacturing, and autonomous systems. Our goal is to provide researchers and practitioners with a practical and forward-looking framework for developing intelligent, reliable fault diagnosis systems in today’s data-rich industrial environments.

关键词： Artificial intelligence Real-time systems Sensors Fault detection Fault diagnosis Interconnected systems Intelligent sensors Smart grids Digital twins Adaptation models

来源：评论

学校读者我要写书评

暂无评论

Design, Dynamic Modeling and Control of a 2-DOF Robotic Wrist Actuated by Twisted and Coiled Actuators

arXiv

引用

arXiv 2025年

作者： Zhang, Yunsong Zhou, Xinyu Zhang, Feitian Department of Advanced Manufacturing and Robotics College of Engineering State Key Laboratory of Turbulence and Complex Systems Peking University Beijing100871 China Department of Electrical and Computer Engineering Michigan State University East LansingMI48824 United States

Robotic wrists play a pivotal role in the functionality of industrial manipulators and humanoid robots, facilitating manipulation and grasping tasks. In recent years, there has been a growing interest in integrating artificial muscle-driven actuators for robotic wrists, driven by advancements in technology offering high energy density, lightweight construction, and compact designs. However, in the study of robotic wrists driven by artificial muscles, dynamic model-based controllers are often overlooked, despite their critical importance for motion analysis and dynamic control of robots. This paper presents a novel design of a two-degree-of-freedom (2-DOF) robotic wrist driven by twisted and coiled actuators (TCA) utilizing a parallel mechanism with a 3RRRR configuration. The proposed robotic wrist is expected to feature lightweight structures and superior motion performance while mitigating friction issues. The Lagrangian dynamic model of the wrist is established, along with a nonlinear model predictive controller (NMPC) designed for trajectory tracking tasks. A prototype of the robotic wrist is developed, and extensive experiments are conducted to validate its superior motion performance and the proposed dynamic model. Subsequently, extensive comparative experiments between NMPC and PID controller were conducted under various operating conditions. The experimental results demonstrate the effectiveness and robustness of the dynamic model-based controller in the motion control of TCA-driven robotic wrists. Copyright © 2025, The Authors. All rights reserved.

关键词： Industrial manipulators

来源：评论

学校读者我要写书评

暂无评论

Continual Reinforcement Learning for Digital Twin Synchronization Optimization

引用

IEEE Transactions on Mobile Computing 2025年

作者： Tong, Haonan Chen, Mingzhe Zhao, Jun Hu, Ye Yang, Zhaohui Liu, Yuchen Yin, Changchuan Beijing University of Posts and Telecommunications Beijing Key Laboratory of Network System Architecture and Convergence Beijing Advanced Information Network Laboratory Beijing China College of Computing and Data Science Singapore University of Miami Department of Electrical and Computer Engineering Frost Institute for Data Science and Computing Coral Gables33146 United States University of Miami Department of Industrial and Systems Engineering Coral Gables33146 United States Zhejiang University College of Information Science and Electronic Engineering Hangzhou310027 China North Carolina State University Department of Computer Science RaleighNC27695 United States Beijing Key Laboratory of Network System Architecture and Convergence China Beijing University of Posts and Telecommunications Beijing Advanced Information Network Laboratory Beijing100876 China

This article investigates the adaptive resource allocation scheme for digital twin (DT) synchronization optimization over dynamic wireless networks. In our considered model, a base station (BS) continuously collects factory physical object state data from wireless devices to build a real-time virtual DT system for factory event analysis. Due to continuous data transmission, maintaining DT synchronization must use extensive wireless resources. To address this issue, a subset of devices is selected to transmit their sensing data, and resource block (RB) allocation is optimized. This problem is formulated as a constrained Markov process (CMDP) problem that minimizes the long-term mismatch between the physical and virtual systems. To solve this CMDP, we first transform the problem into a dual problem that refines RB constraint impacts on device scheduling strategies. We then propose a continual reinforcement learning (CRL) algorithm to solve the dual problem. The CRL algorithm learns a stable policy across historical experiences for quick adaptation to dynamics in physical states and network capacity. Simulation results show that the CRL can adapt quickly to network capacity changes and reduce normalized root mean square error (NRMSE) between physical and virtual states by up to 55.2%, using the same RB number as traditional methods. © 2025 IEEE. All rights reserved.

关键词： Markov processes

来源：评论

学校读者我要写书评

暂无评论

AI/ML Based Detection and Categorization of Covert Communication in IPv6 Network

arXiv

引用

arXiv 2025年

作者： Rahman, Mohammad Wali Ur Lin, Yu-Zheng Weeks, Carter Ruddell, David Gabriellini, Jeff Hayes, Bill Hariri, Salim Ziegler, Edward V. Department of Electrical and Computer Engineering University of Arizona TucsonAZ85721 United States Department of Management Information Systems University of Arizona TucsonAZ85721 United States Department of Systems and Industrial Engineering University of Arizona TucsonAZ85721 United States Laboratory for Advanced Cybersecurity Research National Security Agency United States

The flexibility and complexity of IPv6 extension headers allow attackers to create covert channels or bypass security mechanisms, leading to potential data breaches or system compromises. The mature development of machine learning has become the primary detection technology option used to mitigate covert communication threats. However, the complexity of detecting covert communication, evolving injection techniques, and scarcity of data make building machine-learning models challenging. In previous related research, machine learning has shown good performance in detecting covert communications, but oversimplified attack scenario assumptions cannot represent the complexity of modern covert technologies and make it easier for machine learning models to detect covert communications. To bridge this gap, in this study, we analyzed the packet structure and network traffic behavior of IPv6, used encryption algorithms, and performed covert communication injection without changing network packet behavior to get closer to real attack scenarios. In addition to analyzing and injecting methods for covert communications, this study also uses comprehensive machine learning techniques to train the model proposed in this study to detect threats, including traditional decision trees such as random forests and gradient boosting, as well as complex neural network architectures such as CNNs and LSTMs, to achieve detection accuracy of over 90%. This study details the methods used for dataset augmentation and the comparative performance of the applied models, reinforcing insights into the adaptability and resilience of the machine learning application in IPv6 covert communication. In addition, we also proposed a Generative AI-assisted interpretation concept based on prompt engineering as a preliminary study of the role of Generative AI agents in covert communication. © 2025, CC BY-NC-ND.

关键词： Decision trees

来源：评论

学校读者我要写书评

暂无评论

Trikarenos: Design and Experimental Characterization of a Fault-Tolerant 28nm RISC-V-based SoC

引用

IEEE Transactions on Nuclear Science 2025年

作者： Rogenmoser, Michael Wiese, Philip Forlin, Bruno Endres Gurkaynak, Frank K. Rech, Paolo Menicucci, Alessandra Ottavi, Marco Benini, Luca Integrated Systems Laboratory ETH Zurich Switzerland Computer Architecture for Embedded Systems University of Twente Netherlands Department of Industrial Engineering University of Trento Italy Delft University of Technology Department of Space Engineering Netherlands University of Rome Department of Electronic Engineering Tor Vergata Italy Information Engineering at the University of Bologna Department of Electrical Electronic Italy

RISC-V-based fault-tolerant system-on-chip (SoC) designs are critical for the new generation of automotive and space SoC architectures. However, reliability assessment requires characterization under controlled radiation doses to accurately quantify the fault tolerance of the fabricated designs. This work analyzes the Trikarenos design, a SoC implemented in TSMC 28nm, for single event upset (SEU) vulnerability under atmospheric neutron and 200MeV proton radiation, comparing these results to simulation-based fault injection. All faults in error correction codes (ECC) protected memory are corrected by a scrubber, showing an estimated cross-section per bit of up to 1.09 × 10−14 cm2 bit−1. Furthermore, the triple-core lockstep (TCLS) mechanism implemented in Trikarenos is validated and is shown to correct errors affecting a cross-section up to 3.23 × 10−11 cm2, with the remaining uncorrectable vulnerability below 5.36 × 10−12 cm2. When augmenting the experimental analysis of fabricated chips with gate-level fault injection in simulation, 99.10% of injections into the SoC produced correct results, while 100% of injections in the TCLS-protected cores were handled *** 12.28%of all injected faults leading to a TCLS recovery, this indicates an approximate effective flip-flop cross-section of up to 1.28 × 10−14 cm2/FF. © 1963-2012 IEEE.

关键词： Radiation damage

来源：评论

学校读者我要写书评

暂无评论

Lightweight Task-Oriented Semantic Communication Empowered by Large-Scale AI Models

引用

IEEE Transactions on Vehicular Technology 2025年

作者： Liu, Chuanhong Guo, Caili Yang, Yang Chen, Mingzhe Quek, Tony Q. S. Beijing University of Posts and Telecommunications Beijing Key Laboratory of Network System Architecture and Convergence School of Information and Communication Engineering Beijing100876 China Beijing University of Posts and Telecommunications Beijing Laboratory of Advanced Information Networks School of Information and Communication Engineering Beijing100876 China University of Miami Department of Electrical and Computer Engineering Institute for Data Science and Computing Coral GablesFL United States Singapore University of Technology and Design Dept. of Information Systems Technology and Design 487372 Singapore

Recent studies have focused on leveraging large-scale artificial intelligence (LAI) models to improve semantic representation and compression capabilities. However, the substantial computational demands of LAI models pose significant challenges for real-time communication scenarios. To address this, this paper proposes utilizing knowledge distillation (KD) techniques to extract and condense knowledge from LAI models, effectively reducing model complexity and computation latency. Nevertheless, the inherent complexity of LAI models leads to prolonged inference times during distillation, while their lack of channel awareness compromises the distillation performance. These limitations make standard KD methods unsuitable for task-oriented semantic communication scenarios. To address these issues, we propose a fast distillation method featuring a pre-stored compression mechanism that eliminates the need for repetitive inference, significantly improving efficiency. Furthermore, a channel adaptive module is incorporated to dynamically adjust the transmitted semantic information based on varying channel conditions, enhancing communication reliability and adaptability. In addition, an information bottleneck-based loss function is derived to guide the fast distillation process. Simulation results verify that the proposed scheme outperform baselines in term of task accuracy, model size, computation latency, and training data requirements. © 1967-2012 IEEE.

关键词： NP-hard

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：