检索结果-内蒙古大学图书馆

International Conference on advanced Technologies for Signal and Image Processing (ATSIP)

作者： Faten Ben Arfia Mohamed Ben Messaoud Abdelouahed Sabri Computer Engineering System design Laboratory (CES) National Engineering School of Sfax Tunisia Systems and Computers Faculty of Sciences Laboratory of Electronics Signals Morocc Laboratory of Advanced Technologies of medicine and signals (UR-ATMS) National Engineering School of Sfax Tunisia

The data interpolation is an essential part of Bidimensional Empirical Mode Decomposition (BEMD) of an image. In the decomposition process, local maxima and minima of the image are extracted at each iteration and then interpolated to form the upper and lower envelopes, respectively. Because of the properties of radial basis function (RBF) interpolators, they are good candidates for use in BEMD. However, only one or two of the RBF interpolators have been utilized for BEMD so far. This paper employs many RBF interpolators for BEMD, compares their performances, and finds out the useful ones for BEMD especially in the image filtering application. We propose to apply the BEMD approach with the adequate interpolation function in the image denoising domain. After that, we combine the BEMD with the DWT to improve the BEMD denoising method. The analysis is done using real images. Simulations are made to focus mainly on the effect of interpolation methods by providing less or negligible control on the other parameters of the BEMD process. The study is believed to work as a guideline in the area of BEMD based real image in the filtering application.

关键词： Interpolation Filtering Discrete wavelet transforms Image reconstruction Noise reduction Empirical mode decomposition Visualization

来源：评论

学校读者我要写书评

暂无评论

Conditional techniques for low power consumption flip-flops

Conditional techniques for low power consumption flip-flops

引用

作者： Nedovic, Nikola Aleksic, Marko Oklobdzija, Vojin G. Department of Electrical and Computer Engineering Advanced Computer System Design Laboratory University of California Davis CA 95616 United States

ISBN: (纸本)0780370570

Conditional capture and conditional precharge techniques for high-performance flip-flops are reviewed in terms of power and delay. It is found that application of conditional techniques can improve Energy-Delay Product for up to 14% for 50% input activity and save more than 50% in power consumption for quiet input. This property makes conditional methods suitable for high-performance VLSI systems. © 2001 IEEE.

关键词： Flip flop circuits

来源：评论

学校读者我要写书评

暂无评论

Conditional techniques for low power consumption flip-flops

Conditional techniques for low power consumption flip-flops

引用

IEEE International Conference on Electronics, Circuits and systems (ICECS)

作者： N. Nedovic M. Aleksic V.G. Oklobdzija Department of Electrical and Computer Engineering Advanced Computer System Design Laboratory University of California Davis CA USA

Conditional capture and conditional precharge techniques for high-performance flip-flops are reviewed in terms of power and delay. It is found that application of conditional techniques can improve energy-delay product for up to 14% for 50% input activity and save more than 50% in power consumption for quiet input. This property makes conditional methods suitable for high-performance VLSI systems.

关键词： Energy consumption Flip-flops Clocks Delay Very large scale integration Sampling methods Power engineering computing Laboratories Application software Cooling

来源：评论

学校读者我要写书评

暂无评论

Dynamic flip-flop with improved power

Dynamic flip-flop with improved power

引用

IEEE International Conference on computer design: VLSI in computers and Processors, (ICCD)

作者： N. Nedovic V.G. Oklobdzija Advanced Computer System Design Laboratory Department of Electrical and Computer Engineering University of California Davis CA USA

An improved design of a dynamic flip-flop is presented. The proposed design overcomes the problem of the glitch at the output and improves power-delay product for about 27%, while preserving logic embedding property. This is accomplished by equalizing the t/sub pLH/ and t/sub pHL/ of the flip-flop and careful design of keeper elements in the circuit. New design introduces insignificant area increase.

关键词： Flip-flops Delay Logic Clocks Energy consumption MOSFETs Latches Topology Power engineering computing Laboratories

来源：评论

学校读者我要写书评

暂无评论

Hybrid latch flip-flop with improved power efficiency

Hybrid latch flip-flop with improved power efficiency

引用

Symposium on Integrated Circuits and systems design (SBCCI)

作者： N. Nedovic V.G. Oklobdzija Advanced Computer System Design Laboratory Department of Electrical and Computer Engineering University of California Davis CA USA

An improved design of a hybrid latch flip-flop is presented. The proposed design overcomes the problem of the glitch at the output and reduces the power consumption and delay of the circuit resulting in a total power-delay-product improvement of about 20%. It also exhibits better soft-clock edge properties compared to the original circuit. This is accomplished by careful design of keeper elements and introducing the feedback path to suppress unnecessary transitions in the circuit. The new design introduces an insignificant area increase.

关键词： Flip-flops Latches Energy consumption Delay Feedback circuits Power dissipation Clocks Power engineering computing Laboratories State feedback

来源：评论

学校读者我要写书评

暂无评论

Operational systems, logistics engineering and technology insertion

引用

NAVAL ENGINEERS JOURNAL 1997年第3期109卷 205-220页

作者： Grubb, MJ Skolnick, A Michael J. Grubb:has perfomzed naval engineering at the Crane Division Naval Surface Warfare Center (NSWC) for more than twenty-five years. He currently the program manager for the Sustainable Hardware and Affordable Readiness Practice Program (SHARP). is a Navy-wide logistics research and development prgram aimed at the successful transiton of proved technologies inot the fleet. SHARP focuses on reducing acquisition performance capability reliability maintainability and readiness of these systems. Mr. Grubb has served as a department director for the past eleven years. His most recent assignment was as director of the Tactical Computer Resources and Test Equipment Department. This organization provided acquisition and in-service engineering support of the Navy's tectical embedded computers priphirals displays and mass memory storage devices. The organization also provided a complete range of product engineering and metrology engineerig services for SSP NevSeaSysCom and the Trident Program. Prior to this appointment Mr. Grubb was deptuy director psysical security programs department and site responsible for program management and system integration of ashore integrated security systems. Mr. Grubb holds a B.S. degree in industrial engineering from Iowa State Universtiy an M.S. degree in industrial engineering from Purdue University and has copleted the course work (Dec.'96 for a master's degree in public and environment affairs at Indiana University-Purdue Univeristy Indianapolis. Dr. Alfred Skolnick operates System Science Consultants (SSC) specilizing in strategic planning technical program definiton technology assessment and engineering analyses on selected matters of national interest. He has taught physics mathematics and management sciences at University of Virginia and Marymount University and is currently adjunct professor of mathematics at Northern Virginia Community College. Form 1985 to 1989 he was president of the American Society of Noval Engineers. Dr. Skolnick served at Applied Physic

In an era of fiscal austerity, downsizing and unforgiving pressure upon human and economic capital, it is an Augean task to identify resources for fresh and creative work. The realities of the day and the practical demands of more immediate fleet needs can often dictate higher priorities. Yet, the Navy must avoid eating its seed corn. Exercising both technical insight and management foresight, the fleet, the R&D community, the Office of the Chief of Naval Operations (OpNav) and the product engineering expertise of the Naval Surface Warfare Center (NSWC) are joined and underway with integrated efforts to marry new, fully demonstrated technologies and operational urgencies. Defense funding today cannot sponsor all work that can be mission-justified over the long term because budgets are insufficient to support product maturation within the classical development cycle. However, by rigorous technical filtering and astute engineering of both marketplace capabilities and currently available components, it is possible in a few select cases to compress and, in effect, integrate advanced development (6.3), engineering development (6.4), weapon procurement (WPN), ship construction (SCN), operation and maintenance (O&M,N) budgetary categories when fleet criticalities and technology opportunities can happily meet. In short, 6.3 funds can be applied directly to ''ripe gateways'' so modern technology is inserted into existing troubled or aging systems, sidestepping the lengthy, traditional development cycle and accelerating practical payoffs to recurrent fleet problems. To produce such constructive results has required a remarkable convergence of sponsor prescience and engineering workforce excellence. The paper describes, extensively, the philosophy of approach, transition strategy, polling of fleet needs, technology assessment, and management team requirements. The process for culling and selecting specific candidate tasks for SHARP sponsorship (matching operational need with t

关键词： Naval vessels

来源：评论

学校读者我要写书评

暂无评论

ROLE OF SIMULATION IN RAPID PROTOTYPING FOR CONCEPT DEVELOPMENT

引用

NAVAL ENGINEERS JOURNAL 1991年第3期103卷 204-211页

作者： KING, JF BARTON, DE J. Fred King:is the manager of the Advanced Technology Department for Unisys in Reston Virginia. He earned his Ph.D. in mathematics from the University of Houston in 1977. He has been principal investigator of research projects in knowledge engineering pattern recognition and heuristic problem-solving. Efforts include the development of a multi-temporal multispectral classifier for identifying graincrops using LANDSAT satellite imagery data for NASA. Also as a member of the research team for a NCI study with Baylor College of Medicine and NASA he helped develop techniques for detection of carcinoma using multispectral microphotometer scans of lung tissue. He established and became technical director of the AI Laboratory for Ford Aerospace where he developed expert scheduling modeling and knowledge acquisition systems for NASA. Since joining Unisys in 1985 he has led the development of object-oriented programming environments blackboard architectures data fusion techniques using neural networks and intelligent data base systems. Douglas E. Barton:is manager of Logistics Information Systems for Unisys in Reston Virginia. He earned his B.A. degree in computer science from the College of William and Mary in 1978 and did postgraduate work in London as a Drapers Company scholar. Since joining Unisys in 1981 his work has concentrated on program management and software engineering of large scale data base management systems and design and implementation of knowledge-based systems in planning and logistics. As chairman of the Logistics Data Subcommittee of the National Security Industrial Association (NSIA) he led an industry initiative which examined concepts in knowledge-based systems in military logistics. His responsibilities also include evaluation development and tailoring of software engineering standards and procedures for data base and knowledge-based systems. He is currently program manager of the Navigation Information Management System which provides support to the Fleet Ballistic Missile Progr

A valuable technique during concept development is rapid prototyping of software for key design components. This approach is particularly useful when the optimum design approach is not readily apparent or several known alternatives need to be rapidly evaluated. A problem inherent in rapid prototyping is the lack of a "target system" with which to interface. Some alternatives are to develop test driver libraries, integrate the prototype with an existing working simulator, or build one for the specific problem. This paper presents a unique approach to concept development using rapid prototyping for concept development and scenario-based simulation for concept verification. The rapid prototyping environment, derived from artificial intelligence technology, is based on a blackboard architecture. The rapid prototype simulation capability is provided through an object-oriented modeling environment. It is shown how both simulation and blackboard technologies are used collectively to rapidly gain insight into a tenacious problem. A specific example will be discussed where this approach was used to evolve the logic of a mission controller for an autonomous underwater vehicle.

关键词： Military Engineering

来源：评论

学校读者我要写书评

暂无评论

MAGNETOHYDRODYNAMIC SUBMARINE PROPULSION systemS

引用

NAVAL ENGINEERS JOURNAL 1991年第3期103卷 141-157页

作者： SWALLOM, DW SADOVNIK, I GIBBS, JS GUROL, H NGUYEN, LV VANDENBERGH, HH Daniel W. Swallomis the director of military power systems at Avco Research Laboratory Inc. a subsidiary of Textron Inc. in Everett Mass. Dr. Swallom received his B.S. M.S. and Ph.D. degrees in mechanical engineering from the University of Iowa Iowa City Iowa in 1969 1970 and 1972 respectively. He has authored numerous papers in the areas of power propulsion and plasma physics and currently is a member of the Aerospace Power Systems Technical Committee of the AIAA. Dr. Swallom has directed various programs for the development of advanced power generation systems lightweight power conditioning systems and advanced propulsion systems for marine applications. His previous experience includes work with Odin International Corporation Maxwell Laboratories Inc. Argonne National Laboratory and the Air Force Aero Propulsion Laboratory. Currently Dr. Swallom is directing the technical efforts to apply magnetohydrodynamic principles to a variety of propulsion and power applications for various marine vehicles and power system requirements respectively. Isaac Sadovnikis a principal research engineer in the Energy Technology Office at Avco Research Laboratory Inc. a subsidiary of Textron Inc. He received his B.S. in engineering (1974) B.S. in physics (1975) M.S. in aeronautics and astronautics (1976) and Ph.D. in physics of fluids (1981) at the Massachusetts Institute of Technology. Dr. Sadovnik has been involved in research work funded by DARPA concerning the use of magnetohydrodynamics for underwater propulsion. He has built theoretical models that predict the hydrodynamic behavior of seawater flow through magnetohydrodynamic ducts and their interaction with the rest of the vehicle (thrust and drag produced). In addition Dr. Sadovnik has been involved in research investigations geared toward the NASP program concerning the use of magnetohydrodynamic combustion-driven accelerator channels. Prior to joining Avco Dr. Sadovnik was a research assistant at MIT where he conducted experimental and

Magnetohydrodynamic propulsion systems for submarines offer several significant advantages over conventional propeller propulsion systems. These advantages include the potential for greater stealth characteristics, increased maneuverability, enhanced survivability, elimination of cavitation limits, greater payload capability, and the addition of a significant emergency propulsion system. These advantages can be obtained with a magnetohydrodynamic propulsion system that is neutrally bouyant and can operate with the existing submarine propulsion system power plant. A thorough investigation of magnetohydrodynamic propulsion systems for submarine applications has been completed. During the investigation, a number of geometric configurations were examined. Each of these configurations and mounting concepts was optimized for maximum performance for a generic attack class submarine. The optimization considered each thruster individually by determining the optimum operating characteristics for each one and accepting only those thrusters that result in a neutrally buoyant propulsion system. The results of this detailed optimization study show that the segmented, annular thruster is the concept with the highest performance levels and greatest efficiency and offers the greatest potential for a practical magnetohydrodynamic propulsion system for attack class submarines. The optimization study results were used to develop a specific point design for a segmented, annular magnetohydrodynamic thruster for an attack class submarine. The design point case has shown that this thruster may be able to provide the necessary thrust to propel an attack class submarine at the required velocity with the potential for a substantial acoustic signature reduction within the constraints of the existing submarine power plant and the maintenance of neutral buoyancy. This innovative magnetohydrodynamic propulsion system offers an approach for submarine propulsion that can be an important contributio

关键词： Ship Propulsion

来源：评论

学校读者我要写书评

暂无评论

computer-system ARCHITECTURE CONCEPTS FOR FUTURE COMBAT systemS

引用

NAVAL ENGINEERS JOURNAL 1990年第3期102卷 43-62页

作者： ZITZMAN, LH FALATKO, SM PAPACH, JL Dr. Lewis H. Zitzman:is the group supervisor of the Advanced Systems Design Group Fleet Systems Department The Johns Hopkins University Applied Physics Laboratory (JHU/APL). He has been employed at JHU/APL since 1972 performing applied research in computer science and in investigating and applying advanced computer technologies to Navy shipboard systems. He is currently chairman of Aegis Computer Architecture Data Bus and Fiber Optics Working Group from which many concepts for this paper were generated. Dr. Zitzman received his B.S. degree in physics from Brigham Young University in 1963 and his M.S. and Ph.D. degrees in physics from the University of Illinois in 1967 and 1972 respectively. Stephen M. Falatko:was a senior engineering analyst in the Combat Systems Engineering Department Comptek Research Incorporated for the majority of this effort. He is currently employed at ManTech Services Corporation. During his eight-year career first at The Johns Hopkins University Applied Physics Laboratory and currently with ManTech Mr. Falatko's work has centered around the development of requirements and specifications for future Navy systems and the application of advanced technology to Navy command and control systems. He is a member of both the Computer Architecture Fiber Optics and Data Bus Working Group and the Aegis Fiber Optics Working Group. Mr. Falatko received his B.S. degree in aerospace engineering with high distinction from the University of Virginia in 1982 and his M.S. degree in applied physics from The Johns Hopkins University in 1985. Mr. Falatko is a member of Tau Beta Pi Sigma Gamma Tau the American Society of Naval Engineers and the U.S. Naval Institute. Janet L. Papach:is a section leader and senior engineering analyst in the Combat Systems Engineering Department Comptek Research Incorporated. She has ten years' experience as an analyst supporting NavSea Spa War and the U.S. Department of State. She currently participates in working group efforts under Aegis Combat System Doctrin

This paper sets forth computer systems architecture concepts for the combat system of the 2010–2030 timeframe that satisfy the needs of the next generation of surface combatants. It builds upon the current Aegis computer systems architecture, expanding that architecture while preserving, and adhering to, the Aegis fundamental principle of thorough systems engineering, dedicated to maintaining a well integrated, highly reliable, and easily operable combat system. The implementation of these proposed computer systems concepts in a coherent architecture would support the future battle force capable combat system and allow the expansion necessary to accommodate evolutionary changes in both the threat environment and the technology then available to effectively counter that threat. Changes to the current Aegis computer architecture must be carefully and effectively managed such that the fleet will retain its combat readiness capability at all times. This paper describes a possible transition approach for evolving the current Aegis computer architecture to a general architecture for the future. The proposed computer systems architecture concepts encompass the use of combinations of physically distributed, microprocessor-based computers, collocated with the equipment they support or embedded within the equipment itself. They draw heavily on widely used and available industry standards, including instruction set architectures (ISAs), backplane busses, microprocessors, computer programming languages and development environments, and local area networks (LANs). In this proposal, LANs, based on fiber optics, will provide the interconnection to support system expandability, redundancy, and higher data throughput rates. A system of cross connected LANs will support a high level of combat system integration, spanning the major warfare areas, and will facilitate the coordination and development of a coherent multi-warfare tactical picture supporting the future combatant command st

关键词： computer Architecture

来源：评论

学校读者我要写书评

暂无评论

RETROFITTING OF BULBOUS BOWS ON UNITED-STATES NAVY AUXILIARY AND AMPHIBIOUS WARSHIPS

引用

NAVAL ENGINEERS JOURNAL 1984年第6期96卷 40-51页

作者： CHUN, SK HOUGH, JJ ENGLE, AH FUNG, SC Stephen K. Chunis a graduate of the Maritime College of the State University of New York class of 1981 from which he received a B.E. degree in naval architecture and his license as a Third Assistant Engineer from the U.S. Coast Guard. Since graduation he has worked for the U.S. Navy as a naval architect with the Hull Form and Hydrodynamics Performance Division (SEA 55W3) of the Naval Sea Systems Command. Currently he is the task leader for hydrodynamic design for the DDG-51. He is also responsible for bulbous bow and appendage design for surf ace ships. Mr. Chun is a member of ASNE SNAME and ASE. Jeffrey J. Hough:is currently a naval architect with the Hull Form and Hydrodynamic Performance Division (SEA 55VV3) of the Naval Sea Systems Command (NA VSEA). In his current capacity he is a member of the Surface Ship Hydrodynamics Branch and is the divisional coordinator for computer supported design (CSD) technical director for the hull form design system (HFDS) Hull Engineering Group (SEA 55) assistant coordinator for CSD SEA 55 CSD coordinator for the DDG-51 contract design and SEA 55W3 project engineer for aircraft carrier/aviation support ship hydrodynamics. Mr. Hough received his B.S.E. degree in naval architecture and marine engineering in 1978 and his M.S.E. degree in naval architecture and marine engineering in 1979 from the University of Michigan. He began his career with the U.S. Navy in 1979 as an Engineer-in-Training in the Ship Design and Integration Directorate of NAVSEA. Prior to his current assignment Mr. Hough was the technical director responsible for the hull form and hydrodynamics energy conservation program and technical specialist for design practices for resistance and powering margins and hull form geometry. A member of ASNE since 1979 Mr. Hough is also a member of SNAME ASE and the U.S. Naval Institute. Allen H. Engleis a naval architect with the Hull Form Design and Performance Division of the Naval Sea Systems Command. He received his B.S. degree in engineering science from th

To meet energy conservation goals of the U.S. Navy, its attention has been focused on ways to reduce individual ship total resistance and powering requirements. One possible method of improving ship powering characteristics is by modifying existing individual ship hulls with the addition of bulbous bows. This paper will identify the merits of retrofitting bow bulbs on selected U.S. Navy auxiliary and amphibious warfare ships. A procedure for performing a cost-benefit analysis will be shown for candidate ship classes. An example of this technique for an amphibious warfare ship will also be provided. A brief discussion of future methods to be used for bulbous bow design such as application of systematic model test data and numerical hydrodynamic techniques will be given.

关键词： NAVAL VESSELS

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：