检索结果-内蒙古大学图书馆

Efficient and Stable Photoassisted Lithium‑Ion Battery Enabled by Photocathode with Synergistically Boosted Carriers Dynamics

引用

nano-Micro Letters 2025年第3期17卷 440-454页

作者： Zelin Ma Shiyao Wang Zhuangzhuang Ma Juan Li Luomeng Zhao Zhihuan Li Shiyuan Wang Yazhou Shuang Jiulong Wang Fang Wang Weiwei Xia Jie Jian Yibo He Junjie Wang Pengfei Guo Hongqiang Wang State Key Laboratory of Solidification Processing Center for Nano Energy MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene(NPU)Xi’an 710072People’s Republic of China State Key Laboratory of Solidification Processing School of Materials Science and Engineering DepartmentNorthwestern Polytechnical UniversityXi’an 710072People’s Republic of China State Key Laboratory of Solidification Processing Center of Advanced Lubrication and Seal MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072People’s Republic of China Research and Development Institute of Northwestern Polytechnical University in Shenzhen Shenzhen 518063People’s Republic of China Key Laboratory of Applied Surface and Colloid Chemistry Shaanxi Key Laboratory for Advanced Energy DevicesShaanxi Engineering Lab for Advanced Energy TechnologySchool of Materials Science and EngineeringNational Ministry of EducationShaanxi Normal UniversityXi’an 710119People’s Republic of China

Efficient and stable photocathodes with versatility are of significance in photoassisted lithium-ion batteries(PLIBs),while there is always a request on fast carrier transport in electrochemical active *** work proposes a general approach of creating bulk heterojunction to boost the carrier mobility of photocathodes by simply laser assisted embedding of plasmonic *** employed in PLIBs,it was found effective for synchronously enhanced photocharge separation and transport in light charging ***,experimental photon spectroscopy,finite difference time domain method simulation and theoretical analyses demonstrate that the improved carrier dynamics are driven by the plasmonic-induced hot electron injection from metal to TiO_(2),as well as the enhanced conductivity in TiO2 matrix due to the formation of oxygen vacancies after Schottky *** from these merits,several benchmark values in performance of TiO2-based photocathode applied in PLIBs are set,including the capacity of 276 mAh g^(−1) at 0.2 A g^(−1) under illumination,photoconversion efficiency of 1.276%at 3 A g^(−1),less capacity and Columbic efficiency loss even through 200 *** results exemplify the potential of the bulk heterojunction strategy in developing highly efficient and stable photoassisted energy storage systems.

关键词： Photoassisted lithium-ion batteries Bulk heterojunction Carrier dynamics TiO2 nanofiber Plasmonic metal nanocrystals

来源：评论

学校读者我要写书评

暂无评论

Enhanced room temperature CO2 photoreduction on gas-solid interfaces using nanocrystals integrated with ZIF-8 wrapping design

引用

材料科学技术（英文版） 2025年第6期209卷 55-63页

作者： Xiaoxiong Hou Zhuangzhuang Ma Zhilei Zhang Xiaotong Gao Hongqiang Wang Lichao Jia Key Laboratory of Applied Surface and Colloid Chemistry Shaanxi Key Laboratory for Advanced Energy DevicesShaanxi Engineering Lab for Advanced Energy TechnologySchool of Materials Science and EngineeringNational Ministry of EducationShaanxi Normal UniversityXi'an 710119China Beijing National Laboratory for Molecular Sciences Key Laboratory of Organic SolidsInstitute of ChemistryChinese Academy of SciencesBeijing 100190China University of the Chinese Academy of Sciences Beijing 100049China State Key Laboratory of Solidification Processing Center for Nano Energy MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical University and Shaanxi Joint Laboratory of GrapheneXi'an 710072China

Composites derived from metal-organic frameworks(MOFs)show promise as catalysts for the photocat-alytic reduction of ***,their potential is hindered by constraints such as limited light absorp-tion and sluggish electron transfer and separation,impacting the overall efficiency of the photocatalytic *** this study,TiO2 nanocrystals,modified with Ptx+,underwent laser etching were encapsulated within the traditional MOF-ZIF-8 *** enhanced the adsorption capabilities for CO2 reactants and solar light,while also facilitating directed electron transfer and the separation of photogenerated *** finely-tuned catalyst demonstrates impressive CH4 selectivity at 9.5％,with yields of 250.24 μmol g-1 h-1 for CO and 25.43 μmol g-1 h-1 for CH4,utilizing water as a hole trap and H+*** study demonstrates the viability of achieving characteristics related to the separation of photogen-erated charges in TiO2 nanocrystals through laser etching and MOF composite *** offers novel perspectives for designing MOF-based catalysts with enhanced performance in artificial photosynthesis.

关键词： CO2 photoreduction nanocrystals TiO2 ZIF-8 Wrapping structure

来源：评论

学校读者我要写书评

暂无评论

Tris-based protic ionic liquids with multiple adsorption effects enabling excellent anti-wear and anti-corrosion performances

引用

Journal of Molecular Liquids 2025年 425卷

作者： Ge, Shanqin Chen, Long Li, Wei Cai, Qingzhao Gong, Genxiang Wu, Junhao Yu, Jinhong Nishimura, Kazuhito Jiang, Nan Cai, Tao School of Materials Science and Chemical Engineering Ningbo University Zhejiang Ningbo315211 China State Key Laboratory of Advanced Marine Materials Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo315201 China Advanced Nano-processing Engineering Lab Mechanical Engineering Kogakuin University Tokyo192-0015 Japan

Molecular additives have garnered widespread attention in the fields of lubrication and corrosion protection due to their designable interfacial film-forming efficiency. Herein, three protic ionic liquids (PILs) with the same cation but different anions have been designed and synthesized. Their physicochemical properties, tribological properties and anti-corrosion properties were systematically investigated. Results demonstrated that under dynamic steel-on-steel friction conditions, the PILs can maximally reduce the running-in period, friction coefficient, and wear rate by 90 %, 40 %, and 97 %, respectively, compared to the commercial ionic liquid, BMIMPF6. Under static copper corrosion conditions, the PILs efficiently adsorb onto the copper surface and formed a dense oxide layer on its surface, thus achieving excellent corrosion protection for the copper substrates. Molecular dynamics (MD) simulation results indicate that the exceptional lubricity of PILs is due to its ability to rapidly adsorb onto the metal surface through multiple interaction sites on both its anionic and cationic components, thereby reducing the running-in period and swiftly establishing a lubricating film. This study provides insights into the development of molecular additives featuring multiple adsorption sites, with potential applications in the fields of tribology and corrosion engineering. © 2025

关键词： Tribology

来源：评论

学校读者我要写书评

暂无评论

A general synthetic strategy for N, P co-doped graphene supported metal-rich noble metal phosphides for hydrogen generation

引用

Green Energy & Environment 2024年第1期9卷 152-162页

作者： Jingwen Ma Xiang Li Guangyu Lei Jun Wang Juan Wang Jian Liu Ming Ke Yang Li Chunwen Sun School of Chemical and Environmental Engineering China University of Mining and Technology(Beijing)Beijing100083China State Key Laboratory of Heavy Oil Processing China University of PetroleumBeijing102249China Lab of Advanced Nano-structures&Transfer Processes Department of Chemical EngineeringTianjin UniversityTianjin300354China PetroChina Planning and Engineering Institute Beijing100083China

The exploitation of electrocatalysts with high activity and durability for HER is desirable for future energy systems,but it is still a *** have attracted increasing attentions,but the preparation process often needs toxic regents or dangerous reaction ***,we develop a general green method to fabricate metal-rich NMPs anchored on NPG through pyrolyzing DNA cross-linked *** obtained Ru_(2) P-NPG exhibits an ultrasmall overpotential of 7 mV at 10 mA cm^(2) and ultralow Tafel slope of 33 mV dec^(-1) in 1.0 mol L?1 KOH,even better than that of commercial Pt/*** addition,Ru 2 P-NPG also shows low overpotentials of 29 and 78 mV in 0.5 mol L^(-1) H_(2)SO_(4) and 1.0 mol L^(-1) PBS,*** superior activity can be attributed to the ultrafine dispersion of Ru 2 P nanoparticles for more accessible sites,more defects formed for abundant active sites,the two-dimensional plane structure for accelerated electron transfer and mass transport,as well as the regulation of electron distribution of the ***,the synthetic method can also be applied to prepare other metal-rich noble metal phosphides(Pd_(3)P-NPG and Rh_(2)P-NPG),which also exhibits high activity for *** work provides an effective strategy for designing NMP-based electrocatalysts.

关键词： Noble metal phosphides Electrocatalyst Deoxyribonucleic acid Hydrogen evolution pH universal

来源：评论

学校读者我要写书评

暂无评论

ZnS nanolayer coated hollow carbon spheres with enhanced rate and cycling performance for Li-S batteries

引用

Science China(Technological Sciences) 2022年第2期65卷 272-281页

作者： MENG FanCheng XU Bin LONG Tao CHENG Sheng LI Yong ZHANG YongYi LIU JieHua School of Materials Science and Engineering Engineering Research Centre of High-Performance Copper Alloy Materials and ProcessingMinistry of EducationHefei University of TechnologyHefei 230009China Division of Nanomaterials and Jiangxi Key Lab of Carbonene Materials Suzhou Institute of Nano-Tech and Nano-BionicsNanchangChinese Academy of SciencesNanchang 330200China Instrumental Analysis Centre Hefei University of TechnologyHefei 230009China School of Instrument Science and Opto-electronics Engineering Hefei University of TechnologyHefei 230009China Key Laboratory of Multifunctional Nanomaterials and Smart Systems Advanced Materials DivisionSuzhou Institute of Nano-Tech and Nano-BionicsChinese Academy of SciencesSuzhou 215123China School of Nano-Tech and Nano-Bionics University of Science and Technology of ChinaHefei 230026China

Conductive carbon structure has been considered as a promising sulfur-hosting material as the cathode of lithium-sulfur ***, the issue of polysulfide shuttling requires an additional component to help restrict and convert sulfur ***, in this work, hollow and porous carbon nanospheres(HCS) are synthesized by a template method and a high-temperature carbonization treatment. A thin layer of ZnS coating is then deposited on the HCS-based sulfur(ZnS@HCS/S) cathode with controlled thickness, and the overall electrochemical properties are systematically evaluated. Results show that with 30 nm-thick ZnS coating, the cathode reveals an improved capacity of 1411 m A h g^(-1), and higher capacities from 0.2 to 3 C rate compared with bare HCS/S cathode. Moreover, the ZnS coating also enhances the cycling stability of ZnS@HCS/S cathode over 280 cycles at 0.5 C, with only 0.2% capacity decay per cycle. This work demonstrates potential applications for high-performance lithiumsulfur batteries.

关键词： lithium-sulfur battery ZnS nanolayer hollow carbon sphere rate performance cycling stability

来源：评论

学校读者我要写书评

暂无评论

Boosting carrier dynamics of BiVO_(4) photoanode via heterostructuring with ultrathin BiOI nanosheets for enhanced solar water splitting

引用

Journal of Materials Science & Technology 2021年第20期79卷 21-28页

作者： Can Li Fan Feng Jie Jian Youxun Xu Fan Li Hongqiang Wang Lichao Jia Key Laboratory of Applied Surface and Colloid Chemistry National Ministry of EducationShaanxi Key Laboratory for Advanced Energy DevicesShaanxi Engineering Lab for Advanced Energy TechnologySchool of Materials Science and EngineeringShaanxi Normal University620 West Chang’an StreetXi’anShaanxi710119China State Key Laboratory of Solidification Processing Center for Nano Energy MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical University and Shaanxi Joint Labortary of GrapheneXi’an710072China

Bismuth vanadate(BiVO_(4))has been one of the most promising candidates for solar water splitting while still suffers from poor bulk charge transport that limits its solar to hydrogen conversion *** demonstrate in this work an efficient strategy for boosting bulk charge transport of BiVO_(4) through the facile impregnation of as-prepared BiVO_(4) photoanode in the precursor solution of ultrathin BiOI *** impregnation creates increased oxygen vacancies in the bulk of BiVO_(4) through the reduction of V^(5+)to V^(4+)by I^(-),which greatly improves bulk separation efficiency for BiVO_(4)-BiOI up to 65.9%at 1.23 V_(RHE) from the original 51.9%of pure BiVO_(4).Moreover,the decoration of the BiOI nanosheets on BiVO_(4) photoanode is also beneficial for addressing the carrier dynamics at surface due to the matched energy levels of BiOI nanosheets and BiVO_(4).The introduced plenty of oxygen vacancies in the bulk of BiVO_(4) and the built-in electric field in BiVO_(4)-BiOI synergistically improve the photocurrent density at 1.23 V_(RHE) up to 3.88 mA cm^(-2).We believe that such facile impregnation strategy will pave an alternative way to the development of highly efficient BiVO_(4) photoanode.

关键词： Bismuth vanadate BiOI nanosheets Heterojunction Solution impregnation Oxygen vacancy

来源：评论

学校读者我要写书评

暂无评论

A comparison of the properties of AlON and LiAlON transparent ceramics prepared by reaction sintering and hot isostatic pressing

引用

Ceramics International 2022年第7期48卷 10096-10104页

作者： Shi, Zitao Wang, Yuezhong Yang, Guojian Li, He Deng, Lifen Tian, Meng Liu, Mengyin Nishimura, Kazuhito Jiang, Nan Chinese Academy of Sciences Ningbo315201 China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of Sciences Beijing100049 China Tianjin Key Laboratory of Optical Thin Films Tianjin Jinhang Technical Physics Institute Tianjin300192 China Advanced Nano-processing Engineering Lab Mechanical Systems Engineering Kogakuin University Tokyo192-0015 Japan

The synthesis of LiAlON and AlON ceramics was investigated using reaction sintering of LiAl5O8–Al2O3–AlN and Al2O3–AlN raw powders at 1400–1800 °C. The phase, microstructural evolution, optical transmittance, and lattice structure were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet visible (UV-VIS) and Fourier transform infrared spectra (FTIR), and transmission electron microscopy (TEM), respectively. Transparent LiAlON and AlON ceramics were fabricated by reaction sintering (1750 °C for 20 h) and post-hot isostatic pressing (HIP) in an Ar atmosphere (180 MPa at 1840 °C for 5 h). The results showed that LiAl5O8 promoted the formation of a single oxynitride phase, and single-phase LiAlON and AlON were obtained at 1700 °C and 1750 °C, respectively. LiAl5O8 depressed the volume expansion of the sintered bodies at higher temperatures (≥1600 °C) caused by the chemical reaction between AlN and Al2O3. Volume expansion was evident in the Al2O3–AlN system, but this expansion was eliminated in the LiAl5O8–Al2O3–AlN system. The obtained LiAlON sample had higher in-line transmittance (86.8% at 3.3 μm) and higher flexural strength (approximately 332 MPa). In contrast, the AlON ceramic was less transparent ( © 2021 Elsevier Ltd and Techna Group S.r.l.

关键词： Sintering

来源：评论

学校读者我要写书评

暂无评论

Manufacturing of micro gas bearing for power MEMS applications using nanopowder metallurgy processing

Manufacturing of micro gas bearing for power MEMS applicatio...

引用

2010 10th IEEE Conference on nanotechnology, nano 2010

作者： Son, Soo-Jung Choi, Chul-Jin Kim, Daejung Kim, Jong-Hyun Chang, Suk-Sang Nano Functional Materials Research Group Korea Institute of Materials Science Korea Republic of Mechanical and Aerospace Engineering University of Texas Arlington TX United States Advanced Materials Processing Lab. Department of Mechanical Engineering POSTECH Korea Republic of

ISBN: (纸本)9781424470334

This paper introduces manufacturing of tilting pad gas bearing with a diameter of 5 mm and a length of 0.5-1mm for power MEMS (Micro Electomechanical Systems) applications. Potential applications include micro gas turbines (100W) for mobile robots, turbo compressors/micro blower for micro fuel cells, micro bearings for pediatric heart, etc. Ultra fine gas bearing for micro component is so complicated that it is hard to fabricate by conventional machining from a manufacturing point of view. In the field of a manufacturing technology for micro parts, nanopowder processing has received a great deal of attention in recent years. In this study, the nanopowder tilting pad gas bearings were prepared by two different methods using: Ni-metal mold by LIGA process, and PDMS soft mold. The effect of the manufacturing condition on sintering properties of metal-nanopowder gas bearing was investigated. The density, shrinkage behavior and dimensional stabilities were analyzed, and the reproducibility was discussed in the compaction and sintering step. ©2010 IEEE.

关键词： Gas turbines

来源：评论

学校读者我要写书评

暂无评论

Surface repair of wide-bandgap perovskites for high-performance all-perovskite tandem solar cells

引用

Journal of Energy Chemistry 2024年第6期93卷 64-70,I0003页

作者： Xiaojing Lv Weisheng Li Jin Zhang Yujie Yang Xuefei Jia Yitong Ji Qianqian Lin Wenchao Huang Tongle Bu Zhiwei Ren Canglang Yao Fuzhi Huang Yi-Bing Cheng Jinhui Tong State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina Key Lab of Artificial Micro-and Nano-Structures of Ministry of Education of China School of Physics and TechnologyWuhan UniversityWuhan 430072HubeiChina Department of Electrical and Electronic Engineering Photonics Research Institute(PRI)Research Institute for Intelligent Wearable Systems(iWEAR)The Hong Kong Polytechnic University999077Hong KongChina Laboratory of Advanced Materials Fudan UniversityShanghai 200438China Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Foshan 528200GuangdongChina

Wide-bandgap(WBG)perovskite solar cells(PSCs)play a fundamental role in perovskite-based tandem solar ***,the efficiency of WBG PSCs is limited by significant open-circuit voltage losses,which are primarily caused by surface *** this study,we present a novel method for modifying surfaces using the multifunctional S-ethylisothiourea hydrobromide(SEBr),which can passivate both Pb^(-1)and FA^(-1)terminated surfaces,Moreover,the SEBr upshifted the Fermi level at the perovskite interface,thereby promoting carrier *** proposed method was effective for both 1.67 and 1.77 eV WBG PSCs,achieving power conversion efficiencies(PCEs)of 22.47%and 19.90%,respectively,with V_(OC)values of 1.28 and 1.33 V,along with improved film and device *** this advancement,we were able to fabricate monolithic all-perovskite tandem solar cells with a champion PCE of 27.10%,This research offers valuable insights for passivating the surface trap states of WBG perovskite through rational multifunctional molecular engineering.

关键词： Wide-bandgap perovskite Surface defect Multifunctional molecule All-perovskite tandem solar cells

来源：评论

学校读者我要写书评

暂无评论

Full-chain enhanced ion transport toward stable lithium metal anodes

引用

Journal of Energy Chemistry 2023年第4期79卷 390-397页

作者： Yuliang Gao Fahong Qiao Nan Li Jingyuan You Yong Yang Jun Wang Chao Shen Ting Jin Xi Li Keyu Xie State Key Laboratory of Solidification Processing Center for Nano Energy MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene(NPU)Xi’an 710072ShaanxiChina School of Chemistry and Chemical Engineering Inner Mongolia UniversityHohhot 010021Inner MongoliaChina Department of Applied Physics The Hong Kong Polytechnic UniversityHong Kong 999077China Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming Shanghai Jiao Tong UniversityShanghai 200240China

The dendrite growth that results from the slow electrode process kinetics prevents the lithium(Li) metal anode from being used in practical applications. Here, full-chain enhanced ion transport for stabilizing Li metal anodes is proposed. Experimental and theoretical studies confirm that full-chain enhanced ion transport(electrocrystallization, mass transport in the electrolyte and diffusion in solid electrolyte interphase) under magnetoelectrochemistry contributes to a homogeneous, dense, and dendrite-free morphology. Specifically, the enhanced electrocrystallization behavior promotes the Li nucleation;the enhanced mass transport in the electrolyte alleviates the ion concentration gradient at the electrode surface, which helps to inhibit dendrite growth;and the enhanced diffusion in the solid electrolyte interphase further homogenizes the Li deposition behavior, obtaining regular and uniform Li ***, the Li metal anode has exceptional cycling stability in both symmetric and full cells,and the pouch cell performs long cycles(170 cycles) in practice evaluation. This work advances fundamental knowledge of the magneto-dendrite effect and offers a new perspective on stabilizing metal anodes.

关键词： Lithium metal anodes Ion transport Pouch cell Lithium dendrites Magnetic field

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：