检索结果-内蒙古大学图书馆

Synthesis of magnetic targeted delivery microcapsules and its anti-corrosion self-healing behavior in epoxy resin coatings

引用

Corrosion Communications 2023年第2期10卷 27-37页

作者： Yingxiang Ma Dan Jiang Yuping Yang Li Ma Jian Zhou Guosheng Huang Cunguo Lin State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology State Key Laboratory for Marine Corrosion and Protection Luoyang Ship Material Research Institute

This study proposed a tung-oil based magnetic targeted delivery microcapsules （MDTMs） to enhance the efficiency of self-healing coatings （SHC）.Magnetic particles were used as function particles and emulsifier in synthesis of microcapsules （MC）.DSC,OM,SEM,TEM,VSM,NSS,EIS and SKP were used to characterize the compounds,structure,healing behavior and anti-corrosion *** indicate that magnetically driven SHC （MD-SHC） reduces 50%migration path of the released tung oil,and increases the release rate of tung oil after the coating is mechanically *** and EIS results suggest that the healing part has impressive anti-corrosion performance,scratches were filled with a large amount of tung oil in a short time,and the released tung oil had formed a complete oil film on scratches at 24 h with higher polarization resistance （Rp）.Rpof MD-SHC（2.5×10～5–3.6×10～5Ωcm2） is 2.0–2.8 times of that the SHC （1.1×10～5–1.8×10～5Ωcm2）.The enrichment in MD-SHC at the interface decreases bonding strength from 7 to 4.5 MPa as the mass additive of microcapsules reaches 15 wt.%.The current work proves the effectiveness of MD-SHC in improving self-healing ability.

关键词： Self-healing coatings Corrosion Microcapsules Magnetic particle Electrochemical impedance spectroscopy

来源：评论

学校读者我要写书评

暂无评论

Regulating the formation ability and mechanical properties of high-entropy transition metal carbides by carbon stoichiometry

引用

Journal of materials Science & technology 2022年第26期121卷 181-189页

作者： Juntao Song Guiqing Chen Huimin Xiang Fuzhi Dai Shun Dong Wenbo Han Xinghong Zhang Yanchun Zhou Science and Technology on Advanced Composite in Special Environments Laboratory Harbin Institute of TechnologyHarbin150080China Science and Technology on Advanced Functional Composite Laboratory Aerospace Research Institute of Materials&Processing TechnologyBeijing100076China

Tremendous efforts have been dedicated to promote the formation ability of high-entropy transition metal ***,the majority of methods for the synthesis of high-entropy transition metal carbides still face the challenges of high temperature,low efficiency,additional longtime post-treatment and uncontrollable *** cope with these challenges,high-entropy transition metal carbides with regulatable carbon stoichiometry(HE TMC)were designed and synthesized,achieving improved ability for single phase solid solutions formation,promoting of sintering and controllable mechanical *** typical composition series,i.e.,easily synthesized(ZrHfTaNb)C(ZHTNC)and difficultly synthesized(Zr_(0.25)Hf_(0.25)Ta_(0.25)Ti_(0.25))C(ZHTTC)are selected to demonstrate the promoting formation ability of single phase solid solutions from carbon stoichiometry *** phase high-entropy ZHTTC,which has been proven difficult in forming a single phase solid solution,can be prepared with the decrease of C/TM ratio under 2000℃;while the high-entropy ZHTNC,which has been proven easy in forming a single phase solid solution,can be synthesized at lower temperatures with the decrease of C/TM *** synergistic effect of entropy stabilization and reduced chemical bond strength gaining from carbon stoichiometry deviations is responsible for the formation of single phase solid solutions and the promoted sintering of HE *** example,the relative density of bulk(ZrHfTaNb)C(SPS-ZHTNC)increases from 90.98%to 94.25%with decreasing the C/TM atomic ratio from 0.9 to *** importantly,the room temperature flexural strength,fracture toughness and brittleness index of SPS-ZHTNCcan be tuned in the range of 384 MPa–419 MPa,4.41 MPam–4.73 MPamand 3.679μm–4.083μm,***,the HE TMCprepared by adjusting the ratio of carbon to refractory transition metal oxides have great potential for achieving low temperature synthesis,promoted sintering and tunable properties.

关键词： Carbon stoichiometry High-entropy ceramics Transition metal carbide Low temperature synthesis Tunable mechanical properties

来源：评论

学校读者我要写书评

暂无评论

Grain boundary segregation induced strong UHTCs at elevated temperatures:A universal mechanism from conventional UHTCs to high entropy UHTCs

引用

Journal of materials Science & technology 2022年第28期123卷 26-33页

作者： Fu-Zhi Dai Bo Wen Yinjie Sun Yixiao Ren Huimin Xiang Yanchun Zhou Science and Technology on Advanced Functional Composite Laboratory Aerospace Research Institute of Materials&Processing TechnologyBeijing 100076China DP Technology Beijing 100044China

Ultra-high temperature ceramics(UHTCs)exhibit a unique combination of excellent properties,including ultra-high melting point,excellent chemical stability,and good oxidation resistance,which make them promising candidates for aerospace and nuclear ***,the degradation of hightemperature strength is one of the main limitations for their ultra-high temperature ***,searching for mechanisms that can help to develop high-performance UHTCs with good high-temperature mechanical properties is urgently *** achieve this goal,grain boundary segregation of a series of carbides,including conventional,medium entropy,and high entropy transition metal carbides,i.e.,Zr_(0.95)W_(0.05)C,TiZrHfC_(3),ZrHfNbTaC_(4),TiZrHfNbTaC_(5),were studied by atomistic simulations with a fitted Deep Potential(DP),and the effects of segregation on grain boundary strength were *** all the studied carbides,grain boundary segregations are realized,which are dominated by the atomic size *** addition,tensile simulations indicate that grain boundaries(GBs)will usually be strengthened due to *** simulation results reveal that grain boundary segregation may be a universal mechanism in enhancing the high-temperature strength of both conventional UHTCs and medium/high entropy UHTCs,since GBs play a key role in controlling the fracture of UHTCs at elevated temperatures.

关键词： UHTCs High entropy ceramics Grain boundary segregation High-temperature strength Machine learning potential

来源：评论

学校读者我要写书评

暂无评论

Dual-salt poly(tetrahydrofuran) electrolyte enables quasi-solid-state lithium metal batteries to operate at -30 ℃

引用

Journal of Energy Chemistry 2024年第9期96卷 456-463页

作者： Zhiyong Li Zhuo Li Rui Yu Xin Guo School of Materials Science and Engineering State Key Laboratory of Material Processing and Die&Mould TechnologyHuazhong University of Science and TechnologyWuhan 430074HubeiChina The State Key Laboratory of Refractories and Metallurgy and Institute of Advanced Materials and Nanotechnology Wuhan University of Science and TechnologyWuhan 430081HubeiChina

The stable operation of solid-state lithium metal batteries at low temperatures is plagued by severe restrictions from inferior electrolyte-electrode interface compatibility and increased energy barrier for Li^(+)***,we prepare a dual-salt poly(tetrahydrofuran)-based electrolyte consisting of lithium hexafluorophosphate and lithium difluoro(oxalato)borate(LiDFOB).The Li-salt anions(DFOB−)not only accelerate the ring-opening polymerization of tetrahydrofuran,but also promote the formation of highly ion-conductive and sustainable interphases on Li metal anodes without sacrificing the Li^(+)conductivity of electrolytes,which is favorable for Li^(+)transport kinetics at low *** of this polymer electrolyte in Li||LiFePO_(4)cells show 82.3%capacity retention over 1000 cycles at 30℃and endow stable discharge capacity at−30℃.Remarkably,the Li||LiFePO4 cells retain 52%of their room-temperature capacity at−20℃and 0.1 *** rational design of dual-salt polymer-based electrolytes may provide a new perspective for the stable operation of quasi-solid-state batteries at low temperatures.

关键词： Poly(tetrahydrofuran) Dual-salt electrolyte Solidel ectrolyte interphase Low-temperature operation Quasi-solid-state battery

来源：评论

学校读者我要写书评

暂无评论

A novel medium-entropy(TiVNb)_(2)AlC MAX phase:Fabrication,microstructure,and properties

引用

Journal of materials Science & technology 2023年第6期137卷 91-99页

作者： Guangqi He Yi Zhang Pei Yao Xingchao Li Ke Ma Jun Zuo Meishuan Li Changsheng Liu Jingjun Xu School of Materials Science and Engineering Northeastern UniversityShenyang 110819China Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Science and Technology on Advanced Functional Composites Laboratory Aerospace Research Institute of Material and Processing TechnologyBeijing 100076China

Medium-or high-entropy materials have great potential for applications due to their diverse compo-sitions and unexpected physicochemical ***,a novel medium-entropy(TiVNb)_(2)AlC was synthesized via hot pressing at 1400℃from three individual M_(2)AlC(M=Ti,V,Nb)MAX *** microstructure of(TiVNb)_(2)AlC was characterized from the microscale to the atomic scale by scanning electron microscope microscopy(SEM),scanning transmission electron microscopy(STEM),and energy dispersive spectroscopy(EDS).The results showed that Ti,V,and Nb atoms were fully solid-soluble in the M-sites of the M_(2)AlC MAX *** with three individual MAX phases,the thermal conduc-tivity of(TiVNb)_(2)AlC was reduced greatly in the temperature range of 293-1473 K,and its mechanical properties(including Young’s modulus,Vickers hardness,and bending strength)were all increased due to the solid solution strengthening and electronic mechanism.

关键词： Medium-entropy ceramics MAX phases Microstructure Thermal properties Mechanical properties

来源：评论

学校读者我要写书评

暂无评论

The highest melting point material:Searched by Bayesian global optimization with deep potential molecular dynamics

引用

Journal of advanced Ceramics 2023年第4期12卷 803-814页

作者： Yinan Wang Bo Wen Xingjian Jiao Ya Li Lei Chen Yujin Wang Fu-Zhi Dai Artificial Intelligence for Science Institute Beijing 100084China Science and Technology on Advanced Functional Composite Laboratory Aerospace Research Institute of Materials&Processing TechnologyBeijing 100076China College of Computer Science and Technology Heilongjiang Institute of TechnologyHarbin 150001China Institute for Advanced Ceramics School of Materials Science and EngineeringHarbin Institute of TechnologyHarbin 150001China Key Laboratory of Advanced Structural-Functional Integration Materials&Green Manufacturing Technology Harbin Institute of TechnologyHarbin 150001China DP Technology Bejing 100080China

The interest in refractory materials is increasing rapidly in recent decades due to the development of hypersonic ***,the substance that has the highest melting point(Tm)keeps a secret,since precise measurements in extreme conditions are overwhelmingly *** the present work,an accurate deep potential(DP)model of a Hf-Ta-C-N system was first trained,and then applied to search for the highest melting point material by molecular dynamics(MD)simulation and Bayesian global optimization(BGO).The predicted melting points agree well with the experiments and confirm that carbon site vacancies can enhance the melting point of rock-saltstructure *** solid solution with N is verified as another new and more effective melting point enhancing approach for HfC,while a conventional routing of the solid solution with Ta(e.g.,HfTa_(4)C_(5))is not suggested to result in a maximum melting *** highest melting point(~4236 K)is achieved with the composition of HfCo.638No.271,which is~80 K higher than the highest value in a Hf-C binary *** mechanism of the N addition is believed to be unstable C-N and N-N bonds in liquid phase,which reduces liquid phase entropy and renders the liquid phase less *** improved melting point and less gas generation during oxidation by the addition of N provide a new routing to modify thermal protection materials for the hypersonic vehicles.

关键词： melting point(T_(m)) carbides carbonitrides deep potential(DP) Bayesiannglobal optimization(BGO)

来源：评论

学校读者我要写书评

暂无评论

Liquid crystal elastomer composites for soft actuators

引用

International Journal of Smart and Nano materials 2023年第4期14卷 440-459页

作者： Jianbo Sun Chao Wang Yongjiao Liu Xudong Liang Zhijan Wang Aerospace Research Institute of Materials&Processing Technology FengtaiBeijingChina School of Science Harbin Institute of TechnologyShenzhenChina Key Laboratory of Aerospace Advanced Materials and Performance Ministry of EducationSchool of Materials Science and EngineeringBeihang UniversityBeijingChina Tianmushan Laboratory HangzhouChina

Liquid crystal elastomers are active materials that combine the anisotropic properties of liquid crystals with the elasticity of polymer *** LCEs exhibit remarkable reversible contraction and elongation capabilities in response to external stimuli,rendering them highly promising for diverse applications,such as soft robotics,haptic devices,shape morphing structures,etc,However,the predominant reliance on heating as the driving stimulus for LCEs has limited their practical *** drawback can be effectively addressed by incorporating fllers,which can generate heat under various *** recent progress in LCE composites has significantly expanded the application potential of *** this minireview,we present the design strategies for soft actuators with LCE composites,followed by a detailed exploration of photothermal and electrothermal *** as prominent ***,we provide an outlook on the challenges and opportunities in the feld of LCE composites.

关键词： Liquid crystal elastomers soft actuators soft robots active composites

来源：评论

学校读者我要写书评

暂无评论

Degradation and biocompatibility of one-step electrodeposited magnesium thioctic acid/magnesium hydroxide hybrid coatings on ZE21B alloys for cardiovascular stents

引用

Journal of Magnesium and Alloys 2024年第1期12卷 120-138页

作者： Zhao-Qi Zhang Bing-Zhi Li Pei-Duo Tong Shao-Kang Guan Li Wang Zheng-Hui Qiu Cun-Guo Lin Rong-Chang Zeng School of Material Science and Engineering&Henan Key Laboratory of Advanced Magnesium Alloy&Key Laboratory of Materials Processing and Mold Technology(Ministry of Education) Zhengzhou University100 Science RoadZhengzhou 450001China State Key Laboratory for Marine Corrosion and Protection Luoyang Ship Material Research InstituteQingdao 266101China Corrosion Laboratory for Light Metals College of Material Science and EngineeringShandong University of Science and TechnologyQingdao 266590China

Constructing a functional hybrid coating appears to be a promising strategy for addressing the poor corrosion resistance and insufficient endothelialization of Mg-based ***,the steps for preparing composite coatings are usually complicated and ***,a novel composite coating,composed of bioactive magnesium thioctic acid(MTA)layer formed by deposition and corrosion-resistant magnesium hydroxide(Mg(OH)_(2))layer grown in situ,is simply fabricated on ZE21B alloys via one-step *** electron microscopy(SEM)shows that the electrodeposited coating has a compact and uniform *** the high adhesion of the MTA/Mg(OH)_(2)hybrid coating is also confirmed by the micro-scratch *** test,scanning kelvin probe(SKP),and hydrogen evolution measurement indicate that the hybrid coating effectively reduces the degradation rate of Mg *** experiment and cell culture trial detect that the composite coating is of fine ***,the preparation mechanism of MTA/Mg(OH)_(2)hybrid coatings is discussed and *** coating shows a great potential application for cardiovascular stents.

关键词： Magnesium alloy Corrosion resistance Hybrid coating Endothelialization Biocompatibility

来源：评论

学校读者我要写书评

暂无评论

Strengthening strategy for high-performance friction stir lap welded joints based on 5083 Al alloy

引用

International Journal of Minerals,Metallurgy and materials 2024年第11期31卷 2498-2507页

作者： Yujia Shen Jijie Wang Beibei Wang Peng Xue Fengchao Liu Dingrui Ni Bolv Xiao Zongyi Ma College of Material Science and Engineering Shenyang Aerospace UniversityShenyang 110136China Shi-changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China CAS Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Binzhou Institute of Technology Shandong Key Laboratory of Advanced Aluminium Materials and TechnologyWeiqiao-UCAS Science and Technology ParkBinzhou 256606China Centre of Excellence for Advanced Materials Dongguan 523808China

During aircraft,ship,and automobile manufacturing,lap structures are frequently produced among Al alloy skins,wall panels,and *** occurrence of welding defects severely decreases mechanical properties during friction stir lap welding(FSLW).This study focuses on investigating the effects of rotation rate,multipass welding,and cooling methods on lap defect formation,microstructural evolution,and mechanical *** defects were eliminated by decreasing welding speed,applying two-pass FLSW with a small welding tool,and introducing additional water cooling,thus leading to a remarkable increase in effective sheet thickness and lap *** above strategy yielded defect-free joints with an ultrafine-grained microstructure and increased tensile shear force from 298 to 551 N/*** fracture behavior of FSLW joints was systematically studied,and a fracture factor of lap joints was proposed to predict their fracture *** reducing the rotation rate,using two-pass welding,and employing additional water cooling strategies,an enlarged,strengthened,and defect-free lap zone with refined ultrafine grains was achieved with a quality comparable to that of lap welds based on 7xxx Al ***,this study provides a valuable FSLW method for eliminating hook defects and improving joint performance.

关键词： friction stir lap welding defect control microstructure fracture mechanisms mechanical properties

来源：评论

学校读者我要写书评

暂无评论

Alloy design for laser powder bed fusion additive manufacturing:a critical review

引用

International Journal of Extreme Manufacturing 2024年第2期6卷 29-63页

作者： Zhuangzhuang Liu Qihang Zhou Xiaokang Liang Xiebin Wang Guichuan Li Kim Vanmeensel Jianxin Xie Key Laboratory for Advanced Materials Processing(MOE) Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083People’s Republic of China Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083People’s Republic of China Beijing Laboratory of Metallic Materials and Processing for Modern Transportation Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083People’s Republic of China Capital Aerospace Machinery Corporation Limited Beijing 100076People’s Republic of China Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials(Ministry of Education) Shandong UniversityJingshi Road 17923Jinan 250061People’s Republic of China Department of Materials Engineering KU LeuvenLeuven 3001Belgium

Metal additive manufacturing(AM)has been extensively studied in recent *** the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using existing alloys for laser powder bed fusion(L-PBF)AM have *** challenges arise because commercial alloys are primarily designed for conventional casting or forging processes,overlooking the fast cooling rates,steep temperature gradients and multiple thermal cycles of *** address this,there is an urgent need to develop novel alloys specifically tailored for L-PBF *** review provides a comprehensive summary of the strategies employed in alloy design for *** aims to guide future research on designing novel alloys dedicated to L-PBF instead of adapting existing *** review begins by discussing the features of the L-PBF processes,focusing on rapid solidification and intrinsic heat ***,the printability of the four main existing alloys(Fe-,Ni-,Al-and Ti-based alloys)is critically assessed,with a comparison of their conventional *** was found that the weldability criteria are not always applicable in estimating ***,the review presents recent advances in alloy development and associated strategies,categorizing them into crack mitigation-oriented,microstructure manipulation-oriented and machine learning-assisted ***,an outlook and suggestions are given to highlight the issues that need to be addressed in future work.

关键词： laser powder bed fusion alloy design printability crack mitigation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：