检索结果-内蒙古大学图书馆

Multilayer thin film growth on crystalline and quasicrystalline surfaces: A phase-field crystal study

Physical Review B 2012年第24期85卷 245428-245428页

作者： Srevatsan Muralidharan Raika Khodadad Ethan Sullivan Mikko Haataja Department of Mechanical and Aerospace Engineering Princeton Institute for the Science and Technology of Materials (PRISM) Program in Applied and Computational Mathematics (PACM) Princeton University Princeton New Jersey 08544 USA and School of Mathematics Institute for Advanced Study Princeton New Jersey 08540 USA

In this paper, we explore the effects of misfit strain fields on both heterogeneous nucleation behavior and anisotropic growth of islands at submonolayer coverages and compositional patterning at complete monolayer coverage via simulations of a phase-field crystal model. In particular, deposition on top of a herringbone structure and quasicrystalline (QC) substrate are considered, the former representing a system with spatially periodic misfit strain fields arising from the presence of surface dislocations, and the latter representing a system which inherently possesses a wide range of local, aperiodic misfit patterns. In the case of single-component systems, we demonstrate that misfit strain fields lead to heterogeneous nucleation behavior and anisotropic island growth. In the case of QC substrate, a wide range of morphologies, such as coexistence of locally hexagonally ordered atomic clusters within a larger scale arrangement with overall QC symmetry and so-called “starfish” aggregates, is observed in a pure system at submonolayer coverages when the adlayer-substrate interaction strength and lattice mismatch are tuned. In the case of bulk-immiscible binary systems at complete monolayer coverage, strain-stabilized compositional domains emerge at low line tension values for both substrates. Interestingly, the compositional domains on the QC substrate inherit their symmetries at sufficiently low line tension values, while at larger line tension values, the domain structure begins to resemble the classical spinodal microstructure. Such domain structures should be readily observable in colloidal systems in which attractive interparticle and particle-substrate interactions can be tuned.

关键词： THIN films CRYSTALS NUCLEATION DISLOCATIONS in crystals MICROSTRUCTURE

来源：评论

学校读者我要写书评

暂无评论

An ultra thin,bright,and sensitive interactive tactile display based on organic mechanoluminescence for dual-mode handwriting identification

引用

InfoMat 2024年第6期6卷 76-87页

作者： Tingting Hou Wenlang Li Haoyu Wang Yuantian Zheng Chaojie Chen Haoran Zhang Kai Chen Huilin Xie Xin Li Shaoshuai He Siwei Zhang Dengfeng Peng Cheng Yang Jacky W.Y.Lam Ben Zhong Tang Yunlong Zi Department of Mechanical and Automation Engineering The Chinese University of Hong KongHong Kongthe People's Republic of China Department of Chemistry Hong Kong Branch of Chinese National Engineering Research Center for Tissue Restoration and Reconstruction and Institute for Advanced StudyThe Hong Kong University of Science and TechnologyHong Kongthe People's Republic of China Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province College of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhenthe People's Republic of China Thrust of Sustainable Energy and Environment The Hong Kong University of Science and Technology(Guangzhou)Guangzhouthe People's Republic of China The Hong Kong University of Science and Technology Interdisciplinary Program Office Hong Kong SARthe People's Republic of China Institute of Materials Research Tsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhenthe People's Republic of China School of Science and Engineering Shenzhen Institute of Aggregate Science and TechnologyThe Chinese University of Hong KongShenzhenthe People's Republic of China HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute Shenzhenthe People's Republic of China Guangzhou HKUST Fok Ying Tung Research Institute Guangzhouthe People's Republic of China

Visible light-based human–machine interactive media is capable of transmitting electrical readouts to machines and providing intuitive feedback to users ***,many inorganic mechanoluminescent(ML)materials-based interactive media,typically ZnS-loaded phosphors(ZLPs),have been successfully ***,organic ML materials-based solutions were rarely exploited despite their huge merits of strong structural modification,abundant luminescence property,low cost,easy preparation,and so ***,we propose a novel interactive tactile display(ITD)based on organic ML materials(Cz-A6-dye)and triboelectric nanogenerator,with ultra-brightness(130%enhancement)and ultra-low threshold pressure(57%reduction)as compared to *** proposed ITD achieves the conversion of weak mechanical stimuli into visible light and electrical signals simultaneously,without extra power ***,the relationship between the luminous performance of organic ML materials and mechanical force is quantified,benefiting from the uniform ML layer *** by convolutional neural networks,the high-accuracy recognition(97.1%)for handwriting and identity of users is realized at the same ***,the ITD has great potential for intelligent wearable electronics and classified military applications.

关键词： interactive media organic mechanoluminescence triboelectric nanogenerators

来源：评论

学校读者我要写书评

暂无评论

Phase equilibria and thermodynamics assessment of the Co–Fe–Nb ternary system

引用

Intermetallics 2024年 168卷

作者： Hutabalian, Yohanes Hermana, Gita Novian Laksono, Andromeda Dwi Chen, Sinn-wen Department of Chemical Engineering National Tsing Hua University Taiwan Hsinchu30013 Taiwan Research and Development Center PT. Gotion Indonesia Materials Jakarta12950 Indonesia Department of Advanced Materials Engineering Bandung Polytechnic for Manufacturing West Java Bandung40135 Indonesia Department of Materials Science and Engineering National Taiwan University of Science and Technology Taiwan Taipei10672 Taiwan Study Program of Materials and Metallurgical Engineering Institut Teknologi Kalimantan Soekarno-Hatta Street Km. 15 Karang Joang East Kalimantan Balikpapan76127 Indonesia High Entropy Materials Center National Tsing Hua University Taiwan Hsinchu30013 Taiwan

The Co–Fe–Nb materials system is a crucial material for magnetic applications. Despite its importance, the phase equilibria and thermodynamic characteristics of this ternary system have not been explored in detail. This study employs the Calphad method to model the phase equilibria of the Co–Fe–Nb ternary system. To obtain the ternary interaction parameters, the experimental data on the isothermal sections at temperatures ranging from 700 °C to 1300 °C was evaluated. These findings indicate that the Co–Fe–Nb system contains no ternary compound, and the (Co,Fe)7Nb6 phase exists as a single solid solution. Significant solubility of the third element in the binary compounds of Co2Nb (Laves C14) and Fe2Nb (Laves C15) is also observed. The results are in good agreement with the experimental data. Furthermore, a liquidus projection of the system is presented, for the first time, revealing eight primary solidification phases in the Co–Fe–Nb ternary system. © 2024

关键词： Phase equilibria

来源：评论

学校读者我要写书评

暂无评论

Water absorption and its effect on the tensile properties of tapioca starch/polyvinyl alcohol bioplastics

引用

IOP Conference Series: materials science and engineering 2017年第1期223卷

作者： H Judawisastra R D R Sitohang L Marta Mardiyati Materials Science and Engineering Research Groups Faculty of Mechanical and Aerospace Engineering Institut Teknologi Bandung Ganesha 10 Bandung 40132. Alumni of Materials Science and Engineering Study Program Institut Teknologi Bandung Bandung Indonesia

Tapioca is one of the largest sources of starch and makes it suitable to be used for bioplastic material. Addition of polyvinyl alcohol (PVA) has been shown to successfully reduce the brittleness of starch bioplastic. This study aims to investigate the influence of PVA addition to water absorption behavior and its effect on the tensile properties of tapioca starch/PVA bioplastics, which are still not yet fully understood until now. The bioplastics were prepared by solution casting method at gelatinization temperature, with PVA addition from 0 to 29 wt%. Examinations were carried out by means of water absorption test, tensile test and Fourier Transform Infrared (FTIR) Spectroscopy. Increasing content of PVA, up to 29 wt%, was found to decrease the water absorption of the bioplastics, with the lowest water saturation point of 251%. This is due to the interaction between starch and PVA which reduces the free OH groups in the resulting bioplastics. Consequently, this led to a decrease in water absorption-related deterioration, i.e. tensile properties degradation of the bioplastics. The addition of 29 wt% resulted into the lowest degradation in tensile strength (6%) and stiffness (30%), while accompanied with the highest elongation increase (39%) after water immersion.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Retraction notice to "Pyrolysis: An effective technique for degradation of COVID-19 medical wastes" [Chemosphere 275 (2021) 130092]

引用

Chemosphere 2025年 370卷 143824页

作者： Selvakumar Dharmaraj Veeramuthu Ashokkumar Rajesh Pandiyan Heli Siti Halimatul Munawaroh Kit Wayne Chew Wei-Hsin Chen Chawalit Ngamcharussrivichai (Deemed to be University) Chennai 603112 Tamil Nadu India. Center of Excellence in Catalysis for Bioenergy and Renewable Chemicals (CBRC) Faculty of Science Chulalongkorn University Bangkok 10330 Thailand. Department of Biochemistry Karpagam Academy of Higher Education (formerly Karpagam University) Pollachi Main Road Eachanari Post Coimbatore Tamil Nadu India. Chemistry Study Program Department of Chemistry Education Faculty of Mathematics and Science Education Universitas Pendidikan Indonesia Jl. Dr. Setiabudhi 229 Bandung 40154 Indonesia. School of Energy and Chemical Engineering Xiamen University Malaysia Jalan Sunsuria Bandar Sunsuria 43900 Sepang Selangor Malaysia College of Chemistry and Chemical Engineering Xiamen University Xiamen 361005 Fujian China. Department of Aeronautics and Astronautics National Cheng Kung University Tainan 701 Taiwan Research Center for Smart Sustainable Circular Economy Tunghai University Taichung 407 Taiwan Department of Mechanical Engineering National Chin-Yi University of Technology Taichung 411 Taiwan. Center of Excellence in Catalysis for Bioenergy and Renewable Chemicals (CBRC) Faculty of Science Chulalongkorn University Bangkok 10330 Thailand Center of Excellence on Petrochemical and Materials Technology (PETROMAT) Chulalongkorn University Pathumwan Bangkok 10330 Thailand.

来源：评论

学校读者我要写书评

暂无评论

Investigating the impact of metal ion variations in terephthalate metal–organic frameworks on the organic solvent nanofiltration performance of mixed matrix membranes

引用

Journal of Membrane science 2024年 700卷

作者： Ajebe, Eyasu Gebrie Hu, Chien Chieh Lugito, Graecia Hu, Chun-Po Hung, Wei-Song Lee, Kueir-Rarn Lai, Juin-Yih Graduate Institute of Applied Science and Technology Advanced Membrane Materials Research Center National Taiwan University of Science and Technology Taipei Taiwan Chemical Engineering Study Program Faculty of Industrial Technology Institut Teknologi Bandung West Java Indonesia Nanyang Technological University 1 Cleantech Loop Singapore R&D Center for Membrane Technology Chung Yuan University Chungli Taoyuan Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University Chungli Taoyuan Taiwan

Nano-fillers integrated into mixed matrix membranes (MMMs) present promising alternatives for organic solvent nanofiltration (OSN). In this work, our objective is to enhance OSN performance by incorporating terephthalate metal-organic frameworks (M-BDC, where M = Zr or Cu) into a P84 matrix to fabricate M-BDC/P84 composite MMMs. This work focuses on the influence of metal cluster variation on particle size, pore size distribution, and specific surface area of M-BDC, while systematically investigating the impact of M-BDC addition on OSN performance and underlying separation mechanisms. The synthesized membranes underwent comprehensive characterization using SEM, XRD, ATR-FTIR, contact angle, zeta potential, and thermogravimetric analysis. Significantly, all MMMs exhibited superior permeance and methyl blue (MB) rejection compared to P84 membranes. This enhancement is attributed to the improved interfacial contact between M-BDC and P84, as well as their effective dispersion within the membrane matrix. Interestingly, comparative analysis between Cu-BDC/P84 and Zr-BDC/P84 MMMs revealed the latter's superior permeance, attributed to its larger pore size and surface area. The resulting MMMs demonstrated outstanding MB rejection (>96.7%) with ethanol permeance of 21.5 and 19.0 LMH/Bar for Zr-BDC/P84 and Cu-BDC/P84 MMMs, respectively. Furthermore, the stable performance of M-BDC-based MMMs during prolonged MB/ethanol operation underscores their potential significance in the field of OSN, providing valuable insights for future membrane design and application. © 2024 Elsevier B.V.

关键词： Organometallics

来源：评论

学校读者我要写书评

暂无评论

Synthesis and characterization of a novel SCPC-CO3ap cement for pulp capping application in dentistry

Synthesis and characterization of a novel SCPC-CO3ap cement ...

引用

29th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, ISCM 2017

作者： Cahyanto, Arief Rezano, Andri Zakaria, Myrna Nurlatifah El-Ghannam, Ahmed Department of Dental Materials Science and Technology Faculty of Dentistry Universitas Padjadjaran Jl. Raya Bandung-Sumedang KM 21 Jatinangor45363 Indonesia Department of Anatomy Physiology and Cell Biology Universitas Padjadjaran Jl. Raya Bandung-Sumedang KM 21 Jatinangor45363 Indonesia Department of Endodontology and Operative Dentistry Program Study of Dentistry Universitas Jenderal Achmad Yani Jl. Terusan Jenderal Sudirman Cimahi Indonesia Department of Mechanical Engineering and Engineering Science University of North Carolina at Charlotte CharlotteNC28223 United States

ISBN: (纸本)9783035712209

Silica-calcium phosphate composite (SCPC) and carbonate apatite (CO3Ap) have several superior properties as they are bioactive, bioresorbable and elicit excellent tissue response. The CO3Ap surface layer and hydrated silica developed on the surface of the SCPC may be a key factor for achieving dentin regeneration. On the other hand, calcium hydroxide [Ca(OH)2] have antibacterial properties and biocompatible to dental tissue. Therefore, the combination of CO3Ap, SCPC, and Ca(OH)2 in a bone cement may be favorable as a pulp capping agent that enhances pulp tissue formation and dentin regeneration. The aim of the present study is to synthesize and characterize a novel SCPC-CO3Ap cement for pulp capping application in dentistry. The cement is composed of dicalcium phosphate anhydrous (DCPA), vaterite, Ca(OH)2 and SCPC. The set cement was further characterized by Fourier transform infrared (FT-IR). The microstructure of set cement was examined by scanning electron microscopy (SEM) and the mechanical strength was evaluated by diametral tensile strength (DTS). The FT-IR analyses revealed that the additional bands of carbonate were detected in each sample. The SEM samples of set cement showing more compact surface microstructure of group II compared to other groups. Furthermore, the combination of 5% SCPC and 5% Ca(OH)2 in the cement facilitated a compact structure with superior mechanical strength. The novel SCPC-CO3Ap cement has great potential to be used for pulp capping to facilitate dentin regeneration. © 2017 Trans Tech Publications, Switzerland.

关键词： Microstructure

来源：评论

学校读者我要写书评

暂无评论

Phase Equilibria and Thermodynamics Assessment of the Co-Fe-Nb Ternary System

SSRN

引用

SSRN 2023年

作者： Hutabalian, Yohanes Hermana, Gita Novian Laksono, Andromeda Dwi Chen, Sinn-Wen Department of Chemical Engineering National Tsing Hua University Hsinchu30013 Taiwan Research and Development Center PT. Gotion Indonesia Materials Jakarta12950 Indonesia Department of Advanced Materials Engineering Bandung Polytechnic for Manufacturing West Java Bandung40135 Indonesia Department of Materials Science and Engineering National Taiwan University of Science and Technology Taipei10672 Taiwan Study Program of Materials and Metallurgical Engineering Institut Teknologi Kalimantan Soekarno-Hatta Street Km. 15 Karang Joang Balikpapan East Kalimantan76127 Indonesia High Entropy Materials Center National Tsing Hua University Hsinchu30013 Taiwan

The Co-Fe-Nb materials system is a crucial material for magnetic applications. Despite its importance, the phase equilibria and thermodynamic characteristics of this ternary system have not been explored in detail. This study employs the Calphad method to model the phase equilibria of the Co-Fe-Nb ternary system. To obtain the ternary interaction parameters, the experimental data on the isothermal sections at temperatures ranging from 700°C to 1300°C was evaluated. These findings indicate that the Co-Fe-Nb system contains no ternary compound, and the (Co,Fe)7Nb6 phase exists as a single solid solution. Significant solubility of the third element in the binary compounds of Co2Nb (laves C14) and Fe2Nb (laves C15) is also observed. The results are in good agreement with the experimental data. Furthermore, a liquidus projection of the system is presented, for the first time, revealing seven primary solidification phases in the Co-Fe-Nb ternary system. © 2023, The Authors. All rights reserved.

关键词： Ternary systems

来源：评论

学校读者我要写书评

暂无评论

Quantifying the trade-offs between energy consumption and salt removal rate in membrane-free cation intercalation desalination

arXiv

引用

arXiv 2018年

作者： Liu, Sizhe Smith, Kyle C. Department of Mechanical Science and Engineering University of Illinois at Urbana-Champaign UrbanaIL61801 United States Department of Materials Science and Engineering University of Illinois at Urbana-Champaign UrbanaIL61801 United States Computational Science and Engineering Program University of Illinois at Urbana-Champaign UrbanaIL61801 United States Beckman Institute for Advanced Study University of Illinois at Urbana-Champaign UrbanaIL61801 United States

Electrochemical desalination devices that use redox-active cation intercalation electrodes show promise for desalination of salt-rich water resources with high water recovery and low energy consumption. While previous modeling and experiments used ion-exchange membranes to maximize charge efciency, here a membrane-free alternative is evaluated to reduce capital cost by using a porous diaphragm to separate Na1+xNiFe(CN)6 electrodes. Two-dimensional porous-electrode modeling shows that, while charge eficiency losses are inherent to a diaphragm-based architecture, charge eficiency values approaching the anion transference number (61% for NaCl) are achievable for diaphragms with suFIciently low salt conductance. Closed-form equations are thereby derived that relate charge eficiency to the non-dimensional Pfeclet and Damkohler numbers that enable the selection of current and ow velocity to produce a desired degree-of-desalination. Simulations using these conditions are used to quantify the tradeo_s between energy consumption and salt removal rate for diaphragmbased cells operated at a range of currents. The simulated distributions of reactions are shown to result from the local salt concentration variations within electrodes using di_usion-potential theory. We also simulate the cycling dynamics of various ow configurations and show that ow-through electrodes exceed the degree-of-desalination compared with ow-by and ow-behind configurations due to solution stagnation within electrodes. Copyright © 2018, The Authors. All rights reserved.

关键词： Desalination

来源：评论

学校读者我要写书评

暂无评论

Nonlinear Geometric Effects in Mechanical Bistable Morphing Structures

引用

Physical Review Letters 2012年第11期109卷 114302-114302页

作者： Zi Chen Qiaohang Guo Carmel Majidi Wenzhe Chen David J. Srolovitz Mikko P. Haataja Department of Mechanical and Aerospace Engineering Princeton University Princeton New Jersey 08544 USA Princeton Institute for the Science and Technology of Materials (PRISM) Princeton University Princeton New Jersey 08544 USA Department of Biomedical Engineering Washington University St. Louis Missouri 63130 USA College of Materials Science and Engineering Fuzhou University Fuzhou Fujian 350108 China Department of Mathematics and Physics Fujian University of Technology Fuzhou Fujian 350108 China Department of Mechanical Engineering Carnegie Mellon University Pittsburgh Pennsylvania 15213 USA Department of Materials Science and Engineering Fujian University of Technology Fuzhou Fujian 350108 China Institute for High Performance Computing 1 Fusionopolis Way Singapore 138632 Program in Applied and Computational Mathematics Princeton University Princeton New Jersey 08544 USA School of Mathematics Institute for Advanced Study Princeton New Jersey 08540 USA

Bistable structures associated with nonlinear deformation behavior, exemplified by the Venus flytrap and slap bracelet, can switch between different functional shapes upon actuation. Despite numerous efforts in modeling such large deformation behavior of shells, the roles of mechanical and nonlinear geometric effects on bistability remain elusive. We demonstrate, through both theoretical analysis and tabletop experiments, that two dimensionless parameters control bistability. Our work classifies the conditions for bistability, and extends the large deformation theory of plates and shells.

关键词： NONLINEAR theories DEFORMATIONS (Mechanics) PARAMETER estimation OPTICAL bistability STRUCTURAL shells PLATES (engineering) CRYSTAL structure

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：