检索结果-内蒙古大学图书馆

6th Environmental Technology and Management Conference, ETMC 2019

作者： Kurniawan, Setyo Budi Imron, Muhammad Fauzul Department of Chemical and Bioprocess Engineering Faculty of Engineering and Built Environment Universiti Kebangsaan Malaysia Bangi Selangor43600 Malaysia Department of Environmental Engineering Faculty of Civil Environmental and Geo Engineering Institut Teknologi Sepuluh Nopember Kampus ITS Keputih Sukolilo Surabaya60111 Indonesia Study Program of Environmental Engineering Department of Biology Faculty of Science and Technology Universitas Airlangga Kampus C UNAIR Jalan Mulyorejo Surabaya60115 Indonesia

The purpose of this research was to investigate the accumulation of plastic debris in the Wonorejo River Estuary, Surabaya, Indonesia. Visible plastic debris were collected from three (3) sampling points along the intertidal area of Wonorejo River Estuary. The correlation between sampling points (SPs) and the amount of the collected plastic debris (CPD) was analysed using one-way ANOVA. Result of one-way ANOVA showed that the sampling point was significantly affect the amount of the collected plastic debris (p2 from SP1, 375.97±16.72 g dry weight/m2 from SP2, and 291.13±36.28 g dry weight/m2 from SP3. The highest percentage of collected debris item was plastic bags (up to 57.90%), followed by bottle caps (up to 16.65%). The most identified plastic types were Low-Density Polyethylene (LDPE) (up to 73.13%), followed by Polypropylene (PP) (up to 17.22%). Understanding the accumulation of plastic debris in estuary is a fundamental requirement to conduct an advance research related to the marine plastic pollution and to determine further actions to solve this problem. © 2020 The Authors, published by EDP sciences.

关键词： Analysis of variance (ANOVA)

来源：评论

学校读者我要写书评

暂无评论

Review on cold-formed steel beam-column, apex and eaves, and truss joint

引用

AIP Conference Proceedings 2024年第1期3116卷

作者： R. M. Fadel Satria Albimanzura Anis Saggaff Mahmood Md Tahir Kiagus Muhammad Aminuddin Doctoral Student of Engineering Science Study Program Doctoral Faculty of Engineering Sriwijaya University Indralaya Indonesia Civil Engineering Faculty of Engineering Sriwijaya University Indralaya Indonesia Institute for Smart Infrastructure and Innovative Construction (ISIIC) Construction Research Centre (CRC) School of Civil Engineering University Teknologi Malaysia Johor Bahru Malaysia

Light steel framing using the Cold-Formed Steel (CFS) sections is one of the Industrialized Building Systems (IBS) highly recommended for our construction industry; it not only contributes to speeding up construction time and reducing material usage but also guarantees the quality of the building. A relentless study has been conducted to achieve the appropriate configuration to ensure CFS popularity by introducing different types of joints applicable in constructing lightweight steel framing. A review of the CFS joint is provided in this study. The CFS joint is focused on the beam-column joint, apex and eaves, and truss joint. The study is mapped to establish research trends on CFS joints. Some areas show limited study and need future research on the proposed joints’ structural behavior aspects.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Distribution mapping of Open Defecation (OD) houses in East Surabaya based on Geographic Information System (GIS) 1

Distribution mapping of Open Defecation (OD) houses in East ...

引用

1st International Conference on science and Technology for Environmental Protection, ICSTEP 2018

作者： Purnama, M.Y. Soedarti, T. Oktavitri, N.I. Fitriani, N. Study Program of Environmental Engineering Department of Biology Faculty of Science and Technology Universitas Airlangga Surabaya Indonesia

The purpose of this study is to know and locate the distribution of open defecation houses in East Surabaya of Surabaya City, Indonesia. Both of secondary and primary data are required for this research, the secondary data consist of the number of OD houses in East Surabaya and basic map of Surabaya City. Primary data consist of field survey OD houses of legal and illegal status. Mapping is conducted with mapping software based on geographical information system. The result of this research proves that there are 1.083 OD houses in East Surabaya and it is equally distributed throughout East Surabaya. The most OD sub-district (Kelurahan) is Gubeng with approximately 319 houses while the least is Kelurahan Tambaksari with 23 houses. © 2019 IOP Publishing Ltd.

关键词： Houses

来源：评论

学校读者我要写书评

暂无评论

Security measures and intrusion detection systems for preventing and mitigating SSL renegotiation denial of service attacks

引用

AIP Conference Proceedings 2024年第1期3135卷

作者： Amalia Nurain Teddy Mantoro Rudy A. G. Gultom Richardus E. Indrajit Cyber Defense Engineering Study Program Faculty of Defense Science and Technology The Republic of Indonesia Defense University Bogor Indonesia Media-Tech Lab Departement of Computer Science Sampoerna University Jakarta Indonesia Pradita University Jakarta Indonesia

Inundating a system, network, or application with traffic is the goal of Denial of Service (DoS) attacks, a disruptive form of attack. SSL DoS attacks, particularly those involving renegotiation, are of particular concern. In order to address these types of attacks, the study proposes several security measures, including rate restriction, session caching, SSL acceleration, and integrating Intrusion Detection Systems (IDS) with a systematic technique method to reduce the risks associated with SSL renegotiation DoS attacks. This study investigates the security measures for preventing and mitigating SSL DoS attacks, with a focus on renegotiation attacks. It offers advice and insights for protecting systems to SSL server administrators and network security professionals by doing rate restriction, session caching, and SSL acceleration to avoid SSL DoS attacks.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Investigation of a novel biocide material for biocorrosion in simulated seawater: A case study on Tinospora cordifolia extract

引用

Case Studies in Chemical and Environmental engineering 2024年 10卷

作者： Royani, Ahmad Hanafi, Muhammad Aigbodion, Victor Sunday Prastya, Muhammad Eka Verma, Chandrabhan Mubarak, Nabisab Mujawar Alfantazi, Akram Manaf, Azwar Research Center for Metallurgy National Research and Innovation Agency – BRIN Kawasan Puspiptek Banten Tangerang Selatan 15314 Indonesia Postgraduate Program of Materials Science Study Department of Physics Faculty of Mathematics and Natural Sciences Universitas Indonesia Depok 16424 Indonesia Research Center for Pharmaceutical Ingredients and Traditional Medicine National Research and Innovation Agency – BRIN Kawasan Puspiptek Banten Tangerang Selatan 15314 Indonesia Department of Metallurgical and Materials Engineering University of Nigeria Nsukka 410001 Nigeria Department of Chemical and Petroleum Engineering Khalifa University of Science and Technology P.O. Box 127788 Abu Dhabi United Arab Emirates Petroleum and Chemical Engineering Faculty of Engineering Universiti Teknologi Brunei Bandar Seri Begawan BE1410 Brunei Darussalam Department of Biosciences Saveetha School of Engineering Saveetha Institute of Medical and Technical Sciences Chennai India

This case report investigates the preventive effect of Tinospora cordifolia extract on biocorrosion induced by Pseudomonas aeruginosa on mild steel API 5L in the simulated seawater medium. Electrochemical techniques, spectroscopic techniques, and surface analysis were employed to investigate biocide performance and corrosion behavior. P. aeruginosa has been shown to enhance iron dissolution in seawater medium. These findings point to the role of P. aeruginosa bacteria in forming differential oxygen, which causes corrosion. Morphology results from atomic Fourier microscopy (AFM) highlight the presence of P. aeruginosa in biotic environments, where the surface is rougher than in abiotic conditions. On the other hand, adding T. cordifolia to the biotic medium resulted in a smoother and more homogeneous surface without any significant deterioration. Electrochemical findings reveal that adding 300 mg L⁻¹ of T. cordifolia extract prevents the microbiologically influenced corrosion (MIC) of steel API 5L, with an optimum effectiveness value of 74.50 % after 21 days of incubation. This protective effect is caused by forming a more compact iron oxide surface layer and the adsorption of phenolic active compounds such as Moupinamide and others on the surface of mild steel API 5L, as detected by liquid chromatography-mass/spectrometry-mass spectrometry (LCMS-MS), Fourier-transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM) techniques. © 2024 The Authors

关键词： Bio-corrosion Biofilm Green biocide Plant extract Pseudomonas aeruginosa Tinospora cordifolia

来源：评论

学校读者我要写书评

暂无评论

Optimization of Extrusion Parameters for Composite Pla/Mg/Ha Filaments Using the Taguchi Method for Bone Scaffold

SSRN

引用

SSRN 2025年

作者： Prakoso, Akbar Teguh Basri, Hasan Adanta, Dendy Gunawan Akbar, Imam Syahrom, Ardiyansyah Arifin, Amir Department of Mechanical Engineering Faculty of Engineering Universitas Sriwijaya Indralaya South Sumatra 30662 Indonesia Doctoral Program Study of Engineering Science Faculty of Engineering Universitas Sriwijaya Palembang South Sumatra30139 Indonesia Applied Mechanics and Design Faculty of Mechanical Engineering Universiti Teknologi Malaysia Johor Bahru Skudai81310 Malaysia Universiti Teknologi Malaysia Johor Bahru Skudai81310 Malaysia

This paper attempts to optimise the single screw extrusion (SSE) process parameters for extruding polylactic acid (PLA)/magnesium (Mg)/hydroxyapatite (HA) composite filament, aiming for a final filament diameter of 1.75 mm to enhance process efficiency and output quality. In this study, the Taguchi method was employed to systematically evaluate how screw speed, nozzle diameter, material composition, and temperature affect filament diameter. The analysis demonstrated that screw speed, nozzle diameter, material composition, and temperature significantly affect the filament diameter. Under optimal conditions (94% wt PLA, 4% wt Mg, and 2% wt HA, 1.95 mm nozzle diameter, 6 rpm screw speed, and 175°C), the resulting filament diameter closely approached 1.75 mm. These findings enhance the fabrication efficiency and quality of composite filaments, with promising applications in advanced bone scaffolds. © 2025, The Authors. All rights reserved.

关键词： Scaffolds (biology)

来源：评论

学校读者我要写书评

暂无评论

Novel insights into curcumin adsorption: Kinetics and mechanisms of decolorization using Pondoh snake fruit seed biochar

Next Research

引用

Next Research 2025年第2期2卷

作者： Wilna Iznilillah Mohamad Ali Fulazzaky Arti Hastuti Asep Bayu Dani Nandiyanto Meli Fiandini Khalida Muda Faculty of Halal Food Science Universitas Djuanda Jalan Tol Ciawi No 1 Ciawi Bogor 16720 Indonesia Study Program of Environmental Science Faculty of Engineering and Science Universitas Ibn Khaldun Bogor Jalan Sholeh Iskandar Kedungbadak Bogor 16162 Indonesia Faculty of Mathematics and Natural Science Education Universitas Pendidikan Indonesia Jalan Dr Setiabudhi No 229 Bandung 40154 Indonesia Faculty of Civil Engineering Universiti Teknologi Malaysia 81310 UTM Skudai Johor Bahru Malaysia

Utilizing natural waste materials to decolorize synthetic and natural dyes offers a promising solution for mitigating environmental pollution. The adsorption isotherms and decolorization kinetics of curcumin onto Pondoh snake fruit seed (PSFS) biochar were predicted using ten isotherm models and the Generalized Fulazzaky (GF) equations, respectively, providing insights into the behavioral characteristics of the adsorption process. Simulations using the Harkin-Jura model demonstrated a good fit, with R ² values exceeding 0.6909 across PSFS biochar granular sizes of 13.65, 25.49, and 65.13 μm, indicating capillary condensation and multilayer adsorption, which validates the GF equations’ applicability. Applying the GF equations to adsorption kinetics simulations showed that declining external mass transfer (EMT) rates were offset by increasing internal mass transfer (IMT) rates. The increase in IMT rates ([ k L a ] d < 0.0 min −1 ) was less pronounced than the decrease in EMT rates ([ k L a ] f > 0.0 min −1 ), suggesting IMT governs curcumin adsorption’s rate-limiting step. PSFS biochar with an average granular size of 25.49 μm proved most effective for decolorizing 100 mg L −1 curcumin, exhibiting a global mass transfer rate range of 0.0020 to 0.0079 min −1 . Utilizing PSFS biochar for curcumin removal contributes to sustainable environmental remediation by advancing green technologies and informing dye effluent management strategies.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Tsunami evacution building model (TEBM) in Teluk Palu (Palu Bay) area

引用

IOP Conference Series: Materials science and engineering 2022年第1期1212卷

作者： M Bakri R Awalia S Mulyati F Zubaidi M Rusydi A A Kasim R Prawita Department of Architecture Faculty of Engineering Tadulako University PaluIndonesia Department of Physics Faculty of Mathematics and Natural Sciences Tadulako University Palu Indonesia Department of Informatics Faculty of Engineering Tadulako University Palu Indonesia Study Program of Architecture Faculty of Engineering Tadulako University Palu Indonesia

The research was conducted in the coastal area of Palu Bay, Lere Village. Data were collected using observation, interviews, and literature study techniques. The data were analyzed using qualitative descriptive methods and focused on the concept of the design of the tsunami evacuation building on the coast of Palu Bay. Data analysis was carried out to obtain an overview of the problems that occurred at the planning location which was analyzed with the concept of architectural design by considering the existing conditions of the site and the surrounding environment, as well as utilizing the potential of the site so that it has the potential for building functions. The conclusion obtained is based on the results of data analysis, it is necessary to have a building that can function as an evacuation container for the community when a disaster occurs in the coastal area of Palu Bay, thereby reducing the number of casualties. The benefit of this research is that it is a solution for local people to save themselves when the tsunami disaster.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Tailoring acid-base properties on metal-free zeolite from Indonesia kaolin to enhance the CO₂ hydrogenation to CH₄

引用

Case Studies in Chemical and Environmental engineering 2024年 10卷

作者： Sholeha, Novia Amalia Dewanto, Bintang Jovita, Stella Nugraha, Reva Edra Taufiq-Yap, Yun Hin Ulfa, Maria Fauzi, Anees Ameera Jalil, Aishah Abdul Bahruji, Hasliza Prasetyoko, Didik College of Vocational Studies Bogor Agricultural University (IPB University) Jalan Kumbang No. 14 Bogor 16151 Indonesia Department of Chemistry Faculty of Science Institut Teknologi Sepuluh Nopember Keputih Sukolilo Surabaya 60111 Indonesia Department of Chemical Engineering Faculty of Engineering Universitas Pembangunan Nasional “Veteran” Jawa Timur Surabaya 60294 Indonesia Department of Chemistry Faculty of Science Universiti Putra Malaysia Serdang Selangor Malaysia Chemistry Education Study Program Faculty of Teacher Training and Education Sebelas Maret University Jl. Ir. Sutami 36A Surakarta 57126 Indonesia Research Center for Biomass and Bioproduct National Research and Innovation Agency (BRIN) Indonesia Department of Chemical Engineering Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia UTM Skudai Johor Johor Bahru 81310 Malaysia Centre of Hydrogen Energy Institute of Future Energy Universiti Teknologi Malaysia UTM Skudai Johor Johor Bahru 81310 Malaysia Centre of Advanced Material and Energy Science Universiti Brunei Darussalam Jalan Tungku Link BE 1410 Brunei Darussalam

The catalytic thermal conversion of carbon dioxide is essential for carbon capture, storage, and utilization, helping to reduce CO2 emissions and potentially stimulating future economic activities. Zeolite Y, ZSM-5, B... 详细信息

The catalytic thermal conversion of carbon dioxide is essential for carbon capture, storage, and utilization, helping to reduce CO₂ emissions and potentially stimulating future economic activities. Zeolite Y, ZSM-5, BEA, and A were synthesized using the hydrothermal technique from Indonesian kaolin to examine the potential use of zeolite as a catalyst without metal nanoparticles. In the absence of metal, catalytic activity for CO₂ methanation relies solely on textural properties and basicity-acidity. Zeolite Y exhibits the highest CO₂ conversion at 36.64 % and attained 100 % of CH₄ selectivity at 400 °C. The exceptional CO₂ conversion of zeolite Y relies on a high basicity level of 1.02 mmol/g, as shown by CO₂-TPD analysis, and a relatively low acid site concentration of 1.48 mmol/g, as determined by NH₃-TPD analysis. ZSM-5, BEA, and zeolite A, demonstrated CO₂ conversion of 29.85 %, 23.86 %, and 12.15 %, respectively. Stability studies revealed ZSM-5 maintains methane (CH₄) selectivity of 94 %, which is only slightly lowered by 6 % for 30 hours, while zeolite Y achieved 90 % selectivity for 26 hours. The presence of mesopores in zeolite ZSM-5 reduced coke or carbon production, maintaining crystalline framework. © 2024 The Authors

关键词： Basicity Greenhouse carbon dioxide Metal free catalyst Methane Zeolite

来源：评论

学校读者我要写书评

暂无评论

The CRISPR/Cas9-mediated base editing design of HBV specific gRNA: A computational approach

引用

AIP Conference Proceedings 2024年第1期3080卷

作者： Hartiyowidi Yuliawuri Jeanne Elvia Christian Edvan Arifsaputra Suherman Biology Study Program Faculty of Science and Engineering Calvin Institute of Technology Jl. Industri Blok B14 Kav. 1 Kemayoran Central Jakarta DKI Jakarta 10610 Indonesia

Therapy to cure a persistent infection of the Hepatitis B Virus (HBV) is needed to suppress viral replication. Current therapy with nucleoside analogues does not destroy HBV covalently closed circular DNA (cccDNA). A new strategy using Base Editing is required to tackle this viral latent infection. We designed guide RNAs (gRNAs) to target the pre-S and S genes of HBV for the development of antiviral, based on the dominant HBV genotype in Indonesia. The conserved regions of HBV, pre-S and S genes were used to determine a selected target of the Cas9-mediated base editing system. Base Editing (BE)-Designer web-based software to designed gRNA and SnapGene to visualized the expression vector. We identified 5 candidate sequences, including 3 sequences in the pre-S and 2 sequences in the S gene. These target sequences show no mismatches and GC contains between 45-60%. In addition, the gRNA sequences were checked in Nucleotide BLAST tools (NCBI) to prevent the off-target effect and ensure the differences with the human genome. This study provides the candidate target sequences to be developed in antiviral therapy. The utility and efficiency of the candidate sequences need to be evaluated in viral gene expression by in vitro HBV infection systems.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：