检索结果-内蒙古大学图书馆

International Conference on Advances in Computational Tools for Engineering Applications, ACTEA

作者： Nashaat El Halabi Roger Achkar Roy Abi Zeid Daou Ali Hayek Josef Börcsök Department of Computer and Communications Engineering American University of Science and Technology Beirut Lebanon Department of Biomedical Technologies Faculty of Public Health Lebanese German University Sahel Alma Lebanon Department of Computer Architecture and System Programming University of Kassel Germany

This paper aims to develop a sensor based monitoring and analyzing system for Neuro-Degenerative Disorder patients (NDD); this may consist on SpO2 sensor, Electrophysiological sensors, NIBP, Motion Capture sensors and Eye Monitoring sensor, taking into consideration an acceptable cost for the whole system. Recorded data will be sent to an embedded decision making unit where detection, analysis, classification, prediction and action control will occur. The sensors and the decision making unit will be implemented in a comfortable jacket that doesn't affect the patients' movements and that can be used by several patients with reduced sensor placement alterations. The decision that can be made is creating a stimulus to avoid falling in case of sudden stop while moving, initiating an alarm, sending a notification to a mobile phone application, and/or telemedicine monitoring features. Artificial Neural Networks will be used to classify and predict the abnormal cases where action should be taken, and since the sensors will be continuously recording, it is possible to achieve continuous learning for the ANN as a first phase. Initial models will be defined by testing normal behaviors and some known abnormal behaviors or symptoms related to the electrical activity and other characteristics of the heart, oxygen saturation level, eye activity and body motion.

关键词： Alzheimer's disease Parkinson's disease Monitoring Artificial neural networks Decision making Biomedical monitoring

来源：评论

学校读者我要写书评

暂无评论

Design and Implementation of a QoL Improvement system for Visually Impaired Patients 5

Design and Implementation of a QoL Improvement System for Vi...

引用

5th International Conference on Advances in Computational Tools for Engineering Applications, ACTEA 2023

作者： Abi Zeid Daou, Roy Beaino, Jad Hawat, Johnny Ibrahim, Ramy Hayek, Ali Boercsoek, Josef Olmedo, Jose Javier Serrano Université la Sagesse Faculty of Engineering Mechatronics Department Beirut Lebanon MART Learning Education and Research Center Chananir Lebanon University of Applied Science Hamm-Lippstadt Department Lippstadt 2 Hardware Engineering Hamm59063 Germany University of Kassel Faculty of Electrical Engineering/Computer Science Department of Computer Architecture and System Programming Germany Centro de Tecnología Biomédica Universidad Politécnica de Madrid Lab of Bioinstrumentation and Nanomedicine Spain

ISBN: (纸本)9798350309959

Visually impaired people encounter several challenges in their mobility and navigation. Their daily activities are obstructed due to their inability to adapt or recognize accurately their surroundings, especially outside their house which they are more familiar with. Thus, it becomes the main reason of accidents, falling off, getting lost in unknown areas, etc. Furthermore, one of the sensory systems that helps the body to process data about the external environment is the visual system. Blind people also lose touch with the outside world, develops poor motor habits, which results in postural problems as a result. This project will assist visually impaired people in their daily life and simplify normal tasks through a system combining two previously designed projects, 'Smart Shoes for Blind and Visually Impaired People', and 'Human posture monitoring device'. The multifunctional system is developed with the goal of securing safe movements for visually impaired people as well as maintaining a good back posture by detecting leaning postures (LP). The purpose of the smart shoe is to identify obstacles and protect the user from unintended accidents. A compatible Android application has been developed to alert the user when there is an obstruction or when he is walking on a wet surface. Voice alarms will be used to acoustically alert the user. If the user collapses, a message with their position will be sent right away to a relative. On the other hand, the smart vest will identify the position of the user's back and alert him to maintain a straight posture through the same application as well. As the system is dealing with human health, some safety measurements would be taken into consideration to implement a safe electrical system in order to reduce error and to increase accuracy. © 2023 IEEE.

关键词： Accidents

来源：评论

学校读者我要写书评

暂无评论

Auto-positioning mount system for Stereoscopic imaging on variable distances

引用

Journal of Physics: Conference Series 2012年第1期364卷

作者： Zh Yordanov E Fuchs S Löser J Börcsök Department for Computer Architecture and System Programming University of Kassel 34121 Kassel Germany

This paper describes a stereo-imaging system for variable distances. The setup includes a mechanical mount system-holder, a control unit for the correct positioning of the cameras, the cameras itself and the object to capture. The goal of this setup was to achieve a true sense of scale and depth of the filmed material on dynamically variable distances to the object. This demands certain requirements which are usually not necessary for many applications of stereoscopic filming. In the last step, the resulting material is prepared for viewing.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Advanced IOT Traffic Light Control system

Advanced IOT Traffic Light Control System

引用

International Conference on Advances in Computational Tools for Engineering Applications, ACTEA

作者： Martin Abou Hamad Antonio El Hajj Roy Abi Zeid Daou Ali Hayek Gaby Abou Haidar Biomedical Technologies Department Faculty of Public Health Lebanese German University Lebanon MART Learning Education and Research Center Lebanon Department of Computer Architecture and System Programming University of Kassel Kassel Germany Engineering Faculty American University of Science and Technology Zahle Lebanon

For several years, traffic congestion has been a major problem in big cities where the number of cars and different means of transportation has been increasing significantly. The problem of congestion is becoming more and more critical, and if not treated smartly this issue will negatively affect drivers by wasting time and fuel gas while waiting for hours in lanes. This paper presents a new and smart way to mitigate this issue in an affordable cost, minimum processing power, and low power consumption. This concept takes into consideration the majority of the cases that may cause congestion and presents a smart and accurate outputs to ease traffic flow leading to the prediction of the peak hours of traffic congestion for smarter control. A model is designed to study the case of a four lanes crossroad with two traffic lights and two LCD monitors. The strategy in reading data is divided into two parts: real data from sensors and pre collected data from google maps to create a kind of a predicted pattern over a certain time interval. The responsiveness of the system is analyzed thoroughly, and the accuracy of all possible cases is carefully considered and evaluated. Each part of the system was tested alone, and the overall system is still in an ongoing testing phase. The results have shown minimum faulty errors and accepted outputs that can lead to safe traffic control decisions. Finally, integrating more IoT devices and sensors between V2V, V2P, V2I with the help of artificial intelligence will definitely optimize this system with higher accuracy.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Control of Autonomous Solid Oxide Fuel Cells Subject to Sudden Load Variations

Control of Autonomous Solid Oxide Fuel Cells Subject to Sudd...

引用

2008 IEEE/PES Transmission & Distribution Conference & Exposition, part 1

作者： Dong-Jing Lee Li Wang Department of Electrical Engineering and Computer Science Chair for Computer Architecture and System Programming National Cheng Kung University Tainan Taiwan

This paper presents dynamic behaviors of autonomous solid oxide fuel cells (SOFC) with AC bus control. Both voltage and frequency control are utilized to achieve load-sharing of the studied SOFC feeding isolated loads. A DC-to-DC converter is connected to the output terminals of the studied SOFC for stabilizing output voltage and current fluctuations under different loading conditions. The PWM inverter connected to the output terminals of the DC-to-DC converter is operated under voltage-controlled mode to regulate the voltage profile across the connected loads. It can be concluded from the simulation results that the proposed voltage and frequency droop controllers of the PWM inverter may operate satisfactory under stand-alone mode.

关键词： Solid oxide fuel cells (SOFC) DC-to-DC converter PWM inverter Stand-alone mode

来源：评论

学校读者我要写书评

暂无评论

Speaker's Emotions Recognition Module Based on the GoogleLeNet Neural Network

Speaker's Emotions Recognition Module Based on the GoogleLeN...

引用

2022 International Conference on Smart Information systems and Technologies, SIST 2022

作者： Tereikovskyi, Ihor Tereikovska, Liudmyla Kryvoruchko, Olena Tereikovskyi, Oleh Tyshchenko, Dmytro Franchuk, Tamara National Technical University Of Ukraine Igor Sikorsky Kyiv Polytechnic Institute Dept. Of System Programming And Specialized Computer Systems Kyiv Ukraine Kyiv National University Of Construction And Architecture Dept. Of Information Technology For Design And Applied Mathematics Kyiv Ukraine Kyiv National University Of Trade And Economics Dept. Of Software Engineering And Cyber Security Kyiv Ukraine National Technical University Of Ukraine Igor Sikorsky Kyiv Polytechnic Institute Dept. Of Department Of Computer Engineering Kyiv Ukraine

ISBN: (数字)9781665467902

ISBN: (纸本)9781665467902

The article is devoted to the development of means for recognition of the emotions of the speaker, based on the neural network analysis of fixed fragments of the voice signal. The possibility of improving recognition tools through the use of a convolutional neural network of the GoogLeNet type is shown. The expediency of training the network on the examples of the TESS database is determined. A procedure for representing a voice signal in the form of a square grayscale image has been developed. Based on the use of the specified database, the modification of the GoogLeNet network was carried out. The architecture and software implementation of the recognition module have been developed. With the help of computer experiments, it has been established that after 150 epochs of training on a fairly limited training sample, the modified GoogLeNet makes it possible to achieve an accuracy of recognition of the speaker's emotions of approximately 0.97 on test examples. The obtained accuracy is comparable to the accuracy of the best modern systems of this purpose and confirms the promise of using neural network models like GoogLeNet for emotion recognition based on voice signal analysis. The need for further research aimed at reducing the resource intensity of the neural network model is shown. © 2022 IEEE.

关键词： Emotion Recognition

来源：评论

学校读者我要写书评

暂无评论

Machine Learning Model for Predicting Failures in the Context of Autonomous Vehicles

Machine Learning Model for Predicting Failures in the Contex...

引用

International Conference on system Reliability and Science (ICSRS)

作者： Abderrahim Krini Aymen Ouertani Habil. Josef Börcsök Engineering of Reliability and Quality Functional Safety Robert Bosch GmbH Schwäbisch Gmünd Germany Institute of Functional Safety & Cyber Security Baden-Wuerttemberg Cooperative State University Lörrach Germany Computer Architecture und System Programming University of Kassel Kassel Germany

In general, failure data is obtained in the automotive industry during the warranty period. If these contain the expression of a service life characteristic for each failure, statements can be made about the reliability and availability of the systems. For this purpose, estimation methods are used to adapt empirical lifetime distributions to theoretical lifetime distributions. By means of the distribution characteristics, a prognosis of the reliability and availability to be expected is also possible beyond the observation time. In addition to the data basis to be investigated, which is available completely in test bench and experimental trials or re-censored in the field, various methods can be used for estimation. In the past, several methods have been used, such as the estimators according to Eckel [1], Kaplan-Meier [2] or the estimators according to Pauli [3]. In general, a field failure is subject to several stresses, which can be described by expressions of several lifetime characteristics. For this application case, which occurs in the automotive industry, the known estimation methods, [1]–[3], cannot be used. In this paper, the necessity of multidimensional estimation methods will be introduced first. Then, a new estimation method for multidimensional metrics is presented. In a further step, mathematical proof is given that the new method can provide realistic results. Finally, two example data sets from bench testing and field are presented. Furthermore, some recommendations for the use of the new method are concretized in this context.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Redundant optical data transmission using semiconductor lasers

Redundant optical data transmission using semiconductor lase...

引用

ACS/IEEE International Conference on Computer systems and Applications

作者： H. D. Wacker J. Borcsok H. Hillmer Development HIMA Paul Hildebrandt GmbH + Co KG Bruehl GERMANY Department of Electrical Engineering and Computer Science Chair for Computer Architecture and System Programming Kassel GERMANY University of Kassel Institute of Nanostructure Technologies and Analytics (INA) and Center for Interdisciplinary Nanostructure Science and Technology (CINSaT) Kassel GERMANY

This paper is dealing with redundant optoelectronic data transmission with special respect to laser channels. The concept of the generalized erasure channel (GEC) is used to determine the probability of undetected error for some binary symmetric and non-symmetric channels protected by appropriate codes. In detail, communication via different binary symmetric channels (BSCs), generalized erasure channels and symmetrized binary non symmetric channels (BNSCs) is investigated. Simple upper bounds are given, relating the new formulas to that one of the BSC Finally the results in connection with an inequality for proper codes are applied to multi wavelength optical transmission through channels generated by semiconductor lasers.

关键词： Data communication Semiconductor lasers Error probability Optical transmitters Protection Safety Wavelength division multiplexing Laser theory Upper bound Linear code

来源：评论

学校读者我要写书评

暂无评论

Design and Implementation of a Smart Human Posture Monitoring Device Using a Wearable Vest 7

Design and Implementation of a Smart Human Posture Monitorin...

引用

7th International Conference on Advances in Biomedical Engineering, ICABME 2023

作者： Daou, Roy Abi Zeid Geha, Elio Aoun, Youssef Hayek, Ali Boercsoek, Josef Olmedo, Jose Javier Serrano Université la Sagesse Biomedical Engineering Department Furn El Chebbak Beirut Lebanon Mart Learning Education and Research Center Chananir Lebanon Lebanese German University Faculty of Public Health Biomedical Technologies Department Jounieh Lebanon University of Applied Science Hamm-Lippstadt Department Lippstadt 2 Hardware Engineering Marker Allee 76-78 Hamm59063 Germany University of Kassel Faculty of Electrical Engineering /Computer Science Department of Computer Architecture and System Programming Germany Universidad Politecnica de Madrid Lab of Bioinstrumentation and Nanomedicine Centro de Tecnologia Biomedica Spain

ISBN: (纸本)9798350325850

Chronic back pain can present a serious health concern, with symptoms that can significantly affect an individual's well-being, mobility, and overall quality of life over an extended period. While chronic back pain may manifest suddenly in some cases, it often develops gradually and persists for weeks, and in untreated cases, it can linger for years. Hence, the utilization of assistive devices such as wearable posture-monitoring vests can offer valuable assistance and guidance to users. This research paper is dedicated to the development of a system for detecting, diagnosing, and correcting poor posture, specifically leaning posture. The vest is designed to provide users with visual, auditory, and tactile cues to help them address this issue, thereby reducing the risk associated with leaning. Additionally, an integrated electrical box has been designed to consolidate all components directly onto the main board in a secure enclosure. This box also displays the daily count of instances where the user has leaned. This system is characterized by its electrical safety, portability, compactness, comfort, and affordability. A comprehensive analysis of the system's performance has been conducted with a meticulous evaluation of accuracy. Each component of the system has undergone successful testing, and the system as a whole is currently in the testing phase. The results of these tests have indicated a lack of faulty errors and have demonstrated outstanding accuracy and detection rates. Over 100 individuals of varying ages, genders, and BMI categories were involved in testing, with each person wearing the device for an average of six hours. The accuracy rate achieved was 98.85%, with an average of 54.35 instances of poor posture detected per participant. © 2023 IEEE.

关键词： Wearable technology

来源：评论

学校读者我要写书评

暂无评论

The Relationship between Diagnostic Coverage and Proof Test Interval for 1oo2 and 1oo2D architectures

引用

IFAC Proceedings Volumes 2012年第24期45卷 181-184页

作者： İlker üstoğlu özgür T. Kaymakçı Josef Börcsök Yıldız Technical University Davutpaşa Campus A209 34220 34220 Esenler İstanbul TURKEY (Tel: +90-535-418-22-64 ) Yıldız Technical University Davutpaşa Campus A210 34220 34220 Esenler İstanbul TURKEY University Kassel Faculty of Electrical Engineering/Computer Science Department of Computer Architecture and System Programming Wilhelmshöher Allee 71 34121 Kassel GERMANY

In order to measure the effectiveness of safety protection systems there are several design parameters. Diagnostic coverage factor is one of the most important parameter which influences all architectures. In this short paper the relationship between PFD avg , DC and T I are presented. 1oo2 and 1oo2D architectures are considered as examples.

关键词： Functional safety 1002 architecture

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：