检索结果-内蒙古大学图书馆

2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023

作者： Valipoor, Zahra Koti, Hossein Nejadi Demerdash, Nabeel A. O. Marquette University Electrical and Computer Engineering Department Milwaukee United States Rockwell Automation Inc. Motion Control Team Mequon United States

ISBN: (纸本)9798350316445

Accuracy of the simulation results obtained from the FEA analysis of electric motors is highly dependent on the quality of the motor performance metrics such as motor steady state temperatures and losses. In addition such FEA analysis is typically computationally burdensome and demanding. Improving the computational burden and accuracy of core losses calculation and thermal evaluation in Time-Stepping Finite Element (TS-FE) models of induction motors is addressed in this paper. The Virtual Blocked Rotor (VBR)-based Time-Stepping Finite Element (TS-FE) technique is utilized to mitigate the numerical transient response of the induction motor FE model. The motor core losses have been calculated through the harmonic based core loss calculation that assumes variable loss coefficients as a function of magnetic flux density. In addition, the motor estimated losses, including the calculated core losses are fed to a thermal network model to estimate the temperature of different motor components. © 2023 IEEE.

关键词： Core Losses Induction Motor Temperature Thermal Calibration VBR-based FEA

来源：评论

学校读者我要写书评

暂无评论

Heat Transport Modeling And Model-Based Temperature control Of A Residential Building, A Case Study 24

Heat Transport Modeling And Model-Based Temperature Control ...

引用

24th International Carpathian control Conference, ICCC 2023

作者： Gal, Krisztian Szilveszter Nimrod Kutasi, Denes Automation Engineer Thermo Control Srl. Sfantu Gheorghe Romania Sapientia Hungarian University of Transylvania Department of Electrical Engineering Tirgu Mures Romania

ISBN: (纸本)9798350310221

The paper proposes a case study on modeling, model validation, model-based temperature control of a building to demonstrate the effectiveness of a modern control technique versus a classical control used in a residential building. Energy efficiency is a key topic today, thus it is important to study the methods of temperature control in buildings to achieve the desired control with minimum energy usage. The paper presents the heat transport modeling using the R-C model technique, the model validation (parameter tuning) based on long-term measurements, classical control and model-based predictive (MPC) distributed temperature control in the rooms of the building and the comparison of the energy consumption for each case. Moreover, there are two MPC algorithms discussed, with and without external temperature forecast as disturbance variable. The simulation results and real-time measurements are presented. © 2023 IEEE.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

Computationally Efficient VBR-Based Sensitivity Analysis of Induction Motors

Computationally Efficient VBR-Based Sensitivity Analysis of ...

引用

2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023

作者： Koti, Hossein Nejadi Valipoor, Zahra Demerdash, Nabeel A. O. Rockwell Automation Inc. Motion Control Team Mequon United States Marquette University Electrical and Computer Engineering Department Milwaukee United States

ISBN: (纸本)9798350316445

Sensitivity analysis is a powerful tool that can be utilized for reducing the size of the design space at hand to explore and significantly reduce the computational burden of the optimization process. This is achieved by 'smart' design variable selection. The term 'smart' indicates fixing the un-conflicting design variables that do not require exploration to their maximum or minimum values, depending on their enhancing or degrading effect on the objective functions and allowing the conflicting design variables to be explored within their allowable dynamic range. Intelligent optimization is a critical part of induction motor design process. In this paper, computationally efficient sensitivity analysis is performed to effectively reduce the number of the design variables that will be actively explored in the optimization process of the induction motors. This goal is achieved through the VBR-based TS-FEA together with Design of Experiment and Response Surface Methodology. In addition, the motor estimated losses, including the calculated core losses are fed to a thermal network model to estimate the temperature of different motor components. © 2023 IEEE.

关键词： Core Losses Induction Motor Temperature Thermal Calibration VBR-based FEA

来源：评论

学校读者我要写书评

暂无评论

Discrete-time Formation control With Attitude Alignment: A Geometric Approach under Ergodic Products

引用

IEEE Transactions on control of Network Systems 2025年第2期12卷 1793-1804页

作者： Li, Zhen Tang, Yang Zhang, Wenbing Fan, Yongqing Huang, Tingwen Xi-an University of Posts and Telecommunications School of Automation Xian710121 China East China University of Science and Technology Key Laboratory of Smart Manufacturing in Energy Chemical Process Shanghai200237 China Yangzhou University Department of Mathematics Jiangsu225002 China Shenzhen University of Advanced Technology Faculty of Computer Science and Control Engineering Shenzhen518055 China

Assuming agents possess sensing capabilities and dynamics relative to their body coordinate frames, this paper addresses a displacement-based strategy for discrete-time formation control through attitude synchronization. Unlike the Eulerian approximation, the first challenge lies in developing discrete-time models that capture both position and attitude motions, thereby complementing existing continuous-time systems with a discretized version. Then, two leader-following control protocols are designed, incorporating a jointly-connected topology to relax the connectivity requirements. The analysis of these systems often relies on the Lyapunov function, the existence of which may be hard to guarantee. Consequently, geometric properties of several polytopes are explored under the dynamic topologies and time-varying parameters. By extending the ergodicity results to leader-following scenarios, these properties are characterized as positively invariant sets. This invariance, which is independent of the existence of the Lyapunov function or the solvability of its associated criteria, provides a beneficial tool for analyzing time-variant systems. Utilizing this invariance and some mathematical techniques, the desired formation shape can be achieved in the cases where the attitudes of the followers synchronize with the leader. Finally, a numerical simulation validates the results. © 2014 IEEE.

关键词： Lyapunov functions

来源：评论

学校读者我要写书评

暂无评论

Multi-Agent control:A Graph-Theoretic Perspective

引用

Journal of Systems Science & Complexity 2021年第5期34卷 1973-2002页

作者： CHEN Fei REN Wei State Key Laboratory of Synthetical Automation for Process Industries Northeastern UniversityShenyang 110004China School of Control Engineering Northeastern University at QinhuangdaoQinhuangdao 066004China. Department of Electrical and Computer Engineering University of CaliforniaRiversideCA 92521USA

Progress in development of multi-agent control is *** approaches for multiagent control,estimation,and optimization are discussed in a systematic way with particular emphasis on the graph-theoretic *** is paid to the design of multi-agent systems via Laplacian dynamics,as well as the role of the graph Laplacian spectrum,the challenges of unbalanced digraphs,and consensus-based estimation of graph *** emergent issues,e.g.,distributed optimization,distributed average tracking,and distributed network games,are also reported,which have witnessed extensive development *** are over 200 references listed,mostly to recent contributions.

关键词： Consensus cooperative control distributed average tracking distributed optimization multi-agent system

来源：评论

学校读者我要写书评

暂无评论

Autonomy for Ships: System Thinking and engineering 30

Autonomy for Ships: System Thinking and Engineering

引用

30th International Conference on Software, Telecommunications and Computer Networks, SoftCOM 2022

作者： Dittmann, Kjeld Technical University of Denmark Automation and Control Group Department of Electrical and Photonics Engineering Lyngby2800 Denmark

ISBN: (数字)9789532901177

ISBN: (纸本)9789532901177

Marine autonomy research has focused on al-gorithmic and technical developments, targeting autonomous craft in restricted areas where international rules and regu-lations are not prioritised. This paper addresses the system engineering aspect of a highly complex system in which the seamless, predictable, and secure interoperability of vendor-specific hardware and software subsystems is a fundamental requirement for designing and implementing cyber-physical systems with artificial intelligence to assist or replace the navigating officer, such as autonomous marine surface vehicles. It addresses international rules in the sector and exhibits a system architecture that can fulfil the criteria for safe behaviour in foreseen occurrences and the capacity to request human aid if the autonomous system cannot manage a problem. The system thinking and engineering provided in this article have been applied to The GreenHopper, a harbour bus currently under construction and intended to undergo certification and enter commercial service. © 2022 University of Split, FESB.

关键词： Systems thinking

来源：评论

学校读者我要写书评

暂无评论

A Simplified WECC Composited Load Model for Ambient Signals-Based Identification 2

A Simplified WECC Composited Load Model for Ambient Signals-...

引用

2nd Asia Power and electrical Technology Conference, APET 2023

作者： Han, Zijiao Han, Shenghua Na, Guangyu Zhang, Xinran Dou, Wenlei Tong, Yongji State Grid Liaoning Electric Power Co. Ltd Dispatching & Control Center Shenyang China School of Automation Science and Electrical Engineering Beihang University Beijing China Tsinghua University Department of Electrical Engineering Beijing China

ISBN: (纸本)9798350359428

With the development of electrical technology, the load in the electric power system has changed a lot, especially in the dynamic load. As a result, the load shows brand new dynamic characteristics which means that the traditional load model is incapable of the Simulation and calculation of the electric power system. In this paper, a simplified composited load model-based ambient signal identification is proposed. Firstly, in order to carry out the convex optimization of the load parameters, a quasi-convexity load model is introduced. Then, the power characteristics of several kinds of dynamic load such as electronic load, single phase motor, static load, and so on, under ambient signal is discussed, after which the load is divided into two parts - equivalent static load and motor load. Afterwards, the time-varying load makes it necessary to model the load under large disturbance. The composite load model will be more suitable for the study of the dynamic load. © 2023 IEEE.

关键词： Dynamic loads

来源：评论

学校读者我要写书评

暂无评论

Transformer-Based Sequence Modeling with Action Discretization for Robotic Grasping

Transformer-Based Sequence Modeling with Action Discretizati...

引用

2024 China automation Congress, CAC 2024

作者： Hou, Yaokun Zheng, Song Xu, Zhezhuang Yuan, Meng Huang, Ping Huang, Weibing College of Electrical Engineering and Automation Fuzhou University Key Laboratory of Industrial Automation Control Technology and Information Processing Education Department of Fujian Province Fuzhou350000 China Evomotion Co. Ltd. Guangdong Shenzhen518000 China

ISBN: (纸本)9798350368604

The powerful representational and sequential modeling capabilities of Transformer have been validated in various fields such as natural language processing. However, how to better address sequential decision-making problems like robotic grasping through the Transformer architecture and achieve autonomous control of robotic grasping remains a longstanding challenge. Models that directly output continuous decision actions for robotic arms often rely on mean squared error (MSE) loss for training, which is unable to effectively handle the randomness and diversity of actions. This limitation leads to the generation of relatively singular actions in certain grasping scenarios, reducing the success rate of grasping. To address this issue, this paper proposes a Transformer-based method for discretizing robotic arm actions, where actions are discretized by dimension to enable autoregressive modeling. Experimental results demonstrate that this method effectively improves the grasping performance of robotic arms in simulation environments. © 2024 IEEE.

关键词： Mean square error

来源：评论

学校读者我要写书评

暂无评论

Language Reasoning in Vision-Language-Action Model for Robotic Grasping

Language Reasoning in Vision-Language-Action Model for Robot...

引用

2024 China automation Congress, CAC 2024

作者： Fan, Lingling Chen, Kang Xu, Zhezhuang Yuan, Meng Huang, Ping Huang, Weibing College of Electrical Engineering and Automation Fuzhou University Key Laboratory of Industrial Automation Control Technology and Information Processing Education Department of Fujian Province Fuzhou350000 China Evomotion Co. Ltd. Guangdong Shenzhen518000 China

ISBN: (纸本)9798350368604

Grasping tasks are crucial for the interaction between the robot and environment, requiring the robot to make autonomous decisions based on environmental conditions and instructions. Recently, multimodal Vision Language Models (VLMs) have demonstrated significant potential for robotic grasping. However, previous work has often been confined to high-level planning due to the gap between the text output of VLMs and the numerical predictions of robot actions, as well as the challenges of transferring rich semantic information from large models to the prediction of grasping actions. In this paper, we co-fine-tune a pre-trained VLM using the mix of large-scale visual language data and robotic grasping trajectory data, integrating model into an end-to-end robot control system to construct a Vision Language Action Model (VLA) capable of generating the robot’s underlying actions. Simultaneously, to fully leverage the prior knowledge and reasoning capabilities of the pre-trained model, we insert a language reasoning structure to bridge the mapping from high-level tasks to low-level actions. This method first deduces the relevant information regarding the target object and the end-effector motions, followed by predicting the grasping actions value with finer granularity based on the language reasoning, thereby enhancing the accuracy of action predictions. A series of grasping experiments demonstrate that our method achieves a high grasping success rate under flexible language instructions and exhibits strong generalization capabilities for unseen objects and scenes. © 2024 IEEE.

关键词： Visual languages

来源：评论

学校读者我要写书评

暂无评论

automation 5.0: The Key to Systems Intelligence and Industry 5.0

引用

IEEE/CAA Journal of Automatica Sinica 2024年第8期11卷 1723-1727页

作者： Ljubo Vlacic Hailong Huang Mariagrazia Dotoli Yutong Wang Petros A.Ioannou Lili Fan Xingxia Wang Raffaele Carli Chen Lv Lingxi Li Xiaoxiang Na Qing-Long Han Fei-Yue Wang Institute of Intelligent and Integrated Systems and the School of Engineering and Built Environment Griffith UniversityNathanQLD 4111Australia Department of Aeronautical and Aviation Engineering The Hong Kong Polytechnic UniversityHong KongChina Department of Electrical and Information Engineering Polytechnic of Bari70126 BariItaly State Key Laboratory of Multimodal Artificial Intelligence Systems Institute of AutomationChinese Academy of SciencesBeijing 100190and also with the Qingdao Academy of Intelligent IndustriesQingdao 266114China Department of Electrical Engineering-Systems University of Southern CaliforniaLos AngelesCA 90007 USA School of Automation Beijing Institute of TechnologyBeijing 100081China State Key Laboratory of Multimodal Artificial Intelligence Systems Institute of AutomationChinese Academy of SciencesBeijing 100190 School of Artificial Intelligence University of Chinese Academy of SciencesBeijing 100049 Beijing Huairou Academy of Parallel Sensing Beijing 101499China School of Mechanical and Aerospace Engineering Nanyang Technological UniversitySingapore 639798Singapore Department of Electrical and Computer Engineering Purdue School of Engineering and TechnologyIndiana University-Purdue University IndianapolisIndianapolisIN 46202 USA Department of Engineering University of CambridgeCB21TN CambridgeU.K. School of Science Computing and Engineering TechnologiesSwinburne University of TechnologyMelbourne VIC 3122Australia State Key Laboratory for Management and Control of Complex Systems Chinese Academy of SciencesBeijing 100190 School of Artificial Intelligence University of Chinese Academy of SciencesBeijing 100049China Dazhou Artificial Intelligence Institute Dazhouand the Faculty of Innovation EngineeringMacao University of Science and TechnologyMacao 999078China

automation has come a long way since the early days of mechanization,i.e.,the process of working exclusively by hand or using animals to work with *** rise of steam engines and water wheels represented the first generation of industry,which is now called Industry Citation:***,***,***,***,***,***,***,***,***,***,***,Q.-***,and F.-***,“automation 5.0:The key to systems intelligence and Industry 5.0,”IEEE/CAA ***,vol.11,no.8,pp.1723-1727,Aug.2024.

关键词： automation machinery intelligence

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：