检索结果-内蒙古大学图书馆

A computer INTEGRATED ENGINEERING SYSTEM FOR design AND LIFE-CYCLE MANAGEMENT

NAVAL ENGINEERS JOURNAL 1986年第3期98卷 115-121页

作者： NICKODEMUS, GH YANUS, ID Irwin D. Yanusgraduated from the University of Pennsylvania with a bachelor's degree in arts and science in 1960 and a bachelor of science degree in mechanical engineering in 1961. In 1963 he received a master of science degree in mechanical engineering from Carnegie-Mellon University. Mr. Yanus is presently the manager of naval systems engineering in the Computer Aided Engineering Department of the Plant Engineering Division of Westinghouse Electric Corporation. His prior experience includes 19 years at the Bettis Atomic Power Laboratory where he performed assignments of increasing responsibility in design analysis development and procurement of nuclear reactor components for naval applications. As the manager of reactor mechanical design he was responsible for the mechanical design of theNimitzclass reactor components and control drive mechanism technology development. Mr. Yanus is a member of the American Society of Mechanical Engineers and the Society of Naval Architects and Marine Engineers. Glen H. Nickodemusgraduated from Michigan State University in 1964 with a bachelor of science degree in civil engineering. He joined the Pittsburgh-Des Moines Corporation in July of the same year. A master of science degree in civil engineering was obtained from Carnegie-Mellon University in 1973. In 1969 Mr. Nickodemus joined the Advanced Reactors Division of the Westinghouse Electric Corporation where he performed design and structural analysis functions for the development of the Fast Flux Test Facility and Clinch River Breeder Reactor Plant (CRBRP). As manager of CRBRP reactor engineering stress analysis he was responsible for the reactor vessel internals closure head control rod drivelines and miscellaneous guard vessels and head access area components. He is currently the manager of software development for the Computer Aided Engineering Department of the Plant Engineering Division. Mr. Nickodemus is a member of the American Society of Mechanical Engineers and is a registered professional engineer in Penn

This paper describes a computer integrated engineering system for design and life cycle management of weapons systems, ships and other multidisciplined systems. All engineering data are stored in a central engineering database. Individual application databases define and process information necessary for specific discipline evaluations. Interface modules between the application databases and the engineering database ensure that the entered data are complete, consistent, compatible, and in compliance with requirements. Conflicts are immediately identified and efficiently resolved. Implementation of the system improves design quality and reduces costs by minimizing the number of design iterations, reducing the effort to implement changes, providing effective storage and retrieval, and reducing the need for ship checks prior to modifications and alterations.

关键词： MILITARY ENGINEERING

来源：评论

学校读者我要写书评

暂无评论

AUTOMATION OF PROPELLER INSPECTION AND FINISHING

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 124-131页

作者： STERN, H METZGER, R Howard K. Stern:is presently vice president of Robotic Vision Systems Inc. He received a bachelor of electrical engineering degree from College of the City of New York in 1960. Mr. Stern joined Dynell Electronics Corporation in 1971 and became part of the Robotic Vision Systems Inc. staff at the time of its spin-off from Dynell. He was program manager of the various three-dimensional sensing and replication systems constructed by Dynell and Robotic Vision Systems. As program manager his responsibilities encompassed technical administrative and operational areas. The first two portrait sculpture studio systems and the first three replication systems built by Robotic Vision Systems Inc. were designed manufactured and operated under his direction. Before joining Dynell Mr. Stern was a senior engineer at Instrument Systems Corporation and chief engineer of the Special Products Division of General Instrument Corporation. Prior to these positions Mr. Stern was chief engineer of Edo Commercial Corporation. At General Instrument and Edo Commercial he was responsible for the design and manufacture of military and commercial avionics equipment. Mr. Stern is presently responsible for directing the systems design and development for all of the company's programs. Robert J. Metzger:is currently engineering group leader at Robotic Vision Systems Inc. He graduated summa cum laude from the Cooper Union in 1972 with a bachelor of electrical engineering degree. Under sponsorship of a National Science Foundation graduate fellowship he graduated from the Massachusetts Institute of Technology in 1974 with the degrees of electrical engineer and master of science (electrical engineering). In 1979 Mr. Metzger graduated from Polytechnic Institute of New York with the degree of master of science (computer science). Since 1974 Mr. Metzger has been actively engaged in the design of systems and software for noncontact threedimensional optical measurement for both military and commercial applications. Of particular note are his c

Ship's propellers are currently measured by manual procedures using pitchometers, templates and gauges. This measurement process is extremely tedious, labor intensive and time consuming. In an effort to provide increased accuracy, repeatability and cost effectiveness in propeller manufacture, an automated propeller optical measurement system (APOMS) has been built which rapidly and automatically scans an entire ship's propeller using a 3-D vision sensor. This equipment is integrated with a propeller robotic automated templating system (PRATS) and the propeller optical finishing system (PROFS) which robotically template and grind the propeller to its final shape, using the APOMS-derived data for control feedback. The optical scanning and the final shape are both controlled by CAD/CAM data files describing the desired propeller shape. An automated propeller balancing system is incorporated into the PROFS equipment. The APOMS/PRATS/PROFS equipment is expected to provide lower propeller manufacturing costs.

关键词： PROPELLERS

来源：评论

学校读者我要写书评

暂无评论

A computer-MODEL FOR SHIPBOARD ENERGY ANALYSIS

引用

NAVAL ENGINEERS JOURNAL 1984年第5期96卷 33-45页

作者： DETOLLA, JP FLEMING, JR Joseph DeTolla:is a ship systems engineer in the Ship Systems Engineering Division SEA 56D5 at the Naval Sea Systems Command. His career with the Navy started in 1965 at the Philadelphia Naval Shipyard Design Division. In 1971 he transferred to the Naval Ship Engineering Center. He has held positions as a fluid systems design engineer and auxiliary systems design integration engineer. Mr. DeTolla has worked extensively in the synthesis and analysis of total energy systems notably the design development of the FFG-7 class waste heat recovery system. He is NA VSEA's machinery group computer supported design project coordinator and is managing the development of a machinery systems data base load forecasting algorithms and design analysis computer programs. Mr. DeTolla has a bachelor of science degree in mechanical engineering from Drexel University and a master of engineering administration degree from George Washington University. He is a registered professional engineer in the District of Columbia and has written several technical papers on waste heat recovery and energy conservation. Jeffrey Fleming:is a senior project engineer in the Energy R&D Office at the David Taylor Naval Ship R&D Center. In his current position as group leader for the future fleet energy conservation portion of the Navy's energy R&D program he is responsible for the identification and development of advanced components and subsystems which will lead to reductions in the fossil fuel consumption of future ships. Over the past several years he has also directed the development and application of total energy computer analysis techniques for the assessment of conventional and advanced shipboard machinery concepts. Mr. Fleming is a 1971 graduate electrical engineer of Virginia Polytechnic Institute and received his MS in electrical engineering from Johns Hopkins University in 1975. Mr. Fleming has authored various technical publications and was the recipient of the Severn Technical Society's “Best Technical Paper of the Year” award in 1

In support of the Navy's efforts to improve the energy usage of future ships and thereby to reduce fleet operating costs, a large scale computer model has been developed by the David Taylor Naval Ship Research and Development Center (DTNSRDC) to analyze the performance of shipboard energy systems for applications other than nuclear or oil-fired steam propulsion plants. This paper discusses the applications and utility of this computer program as a performance analysis tool for design of ship machinery systems. The program is a simulation model that performs a complete thermodynamic analysis of a user-specified energy system. It offers considerable flexibility in analyzing a variety of propulsion, electrical, and auxiliary plant configurations through a component building block structure. Component subroutines that model the performance of shipboard equipment such as engines, boilers, generators, and compressors are available from the program library. Component subroutines are selected and linked in the program to model the desired machinery plant functional configurations. The operation of the defined shipboard energy system may then be simulated over a user-specified scenario of temperature, time, and load profiles. The program output furnishes information on component operating characteristics and fuel demands, which allows evaluation of the total system performance.

关键词：

来源：评论

学校读者我要写书评

暂无评论

SHIPBOARD MAIN BOILER AND FEED PUMP CONTROL-SYSTEM ONLINE ALIGNMENT VERIFICATION

引用

NAVAL ENGINEERS JOURNAL 1982年第6期94卷 39-46页

作者： BANHAM, JW ADAM, DJ James W. Banham:holds positions both as Director of the Machinery Automation Systems Department of the Naval Ship Systems Engineering Station and as Assistant Chairman of the Mechanical and Industrial Engineering Department of Drexel University's Evening College where he holds the rank of Adjunct Associate Professor. He is the author of a text on Numerical Methods Applications in Engineering. In addition to numerous technical papers he is also the author of the ISA film on Boiler Feedwater Control Systems. A registered professional engineer in the state of Pennsylvania Mr. Banham is co-author of a forthcoming handbook on preparing for the Professional Engineering Examination in mechanical engineering. Mr. Banham holds a bachelor of science degree in mechanical engineering from the Pennsylvania State University his graduate studies were taken at the University of Pennsylvania. He is currently a member of the American Society for Engineering Education and the Instrument Society of America. He served as a member of the ISA Education Committee from 1964 through 1973 and as a member of the ISA Power Plant Dynamics Committee since 1969. His service on the latter committee includes terms as Executive Secretary Vice-Chairman and Chairman. Among other honors Mr. Banham was the winner of the Naval Ship Engineering Center's first Technical Achievement Award (1963) Technical Publication Award (1974) and Equal Employment Opportunity Award (1978). He was also the recipient of Drexel University's Laura S. Campbell Award for Excellence in Teaching (1978). He has taught undergraduate courses in classical control theory numerical methods computer programming systems design and analysis and instrumentation. He also teaches systems theory and computer science in an EIT Review and heat transfer in a PE Review conducted by the Drexel University Department of Continuing Professional Education. Mr. David J. Adam:is a Project Engineer in the Naval Sea Systems Command (PMS301) Steam Propulsion Plant Improvement Program where he i

One of the most serious problems encountered in Naval steam plants following World War II was the unreliable performance of boiler and main feedpump pneumatic control systems. In addition to control component and system design deficiencies, these control systems suffered from inadequate methods to measure and adjust system alignment. This paper describes the development of a set of procedures for on-line alignment verification (OLV) of pneumatic main boiler and feedpump control systems. The procedures are designed for use by N avy control system technicians and, in addition to on-line alignment verification, provide guidance for troubleshooting and for performing system alignment. Procedure static checks measure steady state steaming performance and OLV procedure dynamic checks measure the ability of the boiler and control systems to respond to load changes. The paper describes typical control system characteristics that influence OLV procedure content and the supporting analysis that was used to establish alignment criteria ranges that satisfy both steady state and transient performance requirements. Also described is the alignment criteria tolerance analysis along with the steps involved in a typical OLV check procedure development. Descriptions of the various OLV checks, troubleshooting procedures and alignment procedures are provided. Typical shipboard implementation requirements are described and experience to date with the procedures is provided along with a status report on OLV procedure implementations.

关键词：

来源：评论

学校读者我要写书评

暂无评论

CENTML CONTROL SYSTEM TRAINING THROUGH STA TIC AND DYNAMIC SIMULATION

引用

Naval Engineers Journal 1980年第2期92卷 196-206页

作者： HALL, EDWIN E. MOSS, DONALD G. NORRIS, CLIFFORD S. PETERSON, HAROLD D. Mr. Edwin E. Hall received his Bachelor's degree in Electronics from Oklahoma City University. He also is a certified College-Level Instructor in the state of Florida and has done graduate work in Computer Science at the University of Florida. As the Technical Publications and Training Manager Simulation and Control Systems Department. General Electric Company Daytona Beach Fla. he currently is responsible for the costing. planning performance scheduling and timely completion of the Department's Technical Manuals and Technical Training Programs. These Training and Manual contracts cover Ship Systems Programs. Simulation Programs. and Communications Programs for the Armed Services and commercial customers. Mr. Hall has over twenty-years experience as a Technical Writer and Instructor and for the past seventeen years has been at the General Electric Company's Daytona Beach Facility. His experience ranges from teaching Basic Electronics and Radar Circuitry as a civilian instructor for the U.S. Army to writing Manuals Proposals Reports Specifications and Brochures for General Electric's product lines. Mr. Donald G. MOSS is a graduate of Kansas State University from which he received both his B.S. degree in Business Administration and his M.S. degree in Electrical Engineering. He is presently a Senior Systems Engineer for Control Systems in the Simulation and Control Systems Department at the General Electric Company's Daytona Beach Facility. He has been employed by General Electric for 23 years — the first seven as an Engineer and Program Manager on the Fire Control Systems for the Fleet Ballistics Missile Program the next six managing the design of control and checkout equipment on the APOLLO Program and the last ten years working on control equipment for the machinery plants of new Navy ships. Over the span of years at General Electric he has worked on propulsion control for the DD-963 propulsion electric plant and auxiliary control for the FFG-7: propulsion boiler burner electric auxiliary and car

Dynamic Simulation is defined as the hardware and software required to present to the student operator visual and audible cues and responses that are the same as those encountered when operating the Control Consoles aborad ship. This type of simulation is considered essential to the development of operator skills for critical tasks. Less critical tasks can be practiced using static simulation devices. This paper discusses the utilization of these types of training devices to train Navy crews. An overview of the Machinery Control systems of the FFG 7 and AO 177 Class ships is discussed to provide an understanding of state‐of‐the‐art equipment development. The training programs for these two ship Classes are then reviewed to show how simulation devices are currently used by the Training Community, and this is followed by a brief discussion of the additional benefits that also are derived. © 1980 by the American Society of Naval Engineers, Inc.

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE UNITED STATES NAVY'S “design WORK STUDY” APPROACH TO THE DEVELOPMENT OF SHIPBOARD CONTROL systems

引用

Naval Engineers Journal 1976年第6期88卷 62-74页

作者： PLATO, ARTIS I. GAMBREL, WILLIAM DAVID Artis I. Plato:is Head of the Design Work Study/ Shipboard Manning/Human Factors Engineering Section Systems Engineering and Analysis Branch Naval Ship Engineering Center (NAVSEC). He graduated from the City College of New York in 1956 receiving his Bachelor of Mechanical Engineering degree. Following this he started work at the New York Naval Shipyard in the Internal Combustion Engine and Cargo Elevator Section. During 1957 and 1958 he was called up for active duty with the U.S. Army Corps of Engineers and served in Europe with a Construction Engineer Battalion. After release from active duty he returned to the shipyard where he remained until 1961 when he transferred to the Naval Supply Research and Development Facility Bayonne New Jersey. Initially he was in charge of an Engineering Support Test Group and the drafting services for the whole Facility. Later he became a Project Engineer in the Food Services Facilities Branch with duties that included planning and designing new afloat and ashore messing facilities for the Navy. In 1966 he transferred to NAVSEC as a Project Engineer in the Design Work Study Section and in this capacity worked on selected projects and manning problems for new construction and also developed a computer program (Manpower Determination Model) that makes accurate crew predictions for feasibility studies. In 1969 he became Head of the Section. He has been active in the U.S. Army Reserve since his release from active duty and his duties have included command of an Engineer Company various Staff positions and his present assignment as Operations Officer for a Civil Affairs Group. He has completed the U. S. A rmy Corps of Engineers Career Course and the Civil Affairs Career Course and is presently enrolled in the U.S. Army Command and General Staff College non-resident course. Additionally he completed graduate studies at American University Washington D.C in 1972 receiving his MSTM degree in Technology of Management and is a member of ASE ASME CAA U. S. Naval Instit

The purpose of this paper is to discuss a system analysis technique called “design Work Study”, that is used by the U.S. Navy for the development of improved ship control systems. The design Work Study approach is one which brings about the most efficient and cost effective man‐machine combination for the ship control functions. Adherence to this process insures that the advantages of automation are balanced against incurred operational and maintenance expense. At present, U.S. Navy doctrine requires that certain ship operating stations, such as steering and propulsion control, be manned at specified ship conditions of readiness. Therefore, if personnel are needed to fulfill these combat environment obligations, excessive automation may only result in unnecessary additional acquisition costs and increased personnel skill requirements. The design Work Study process can be applied to establish the required fine balance between the degree of built‐in automation and the shipboard manpower levels. In order to explain the techniques that are used for this process, the Authors will present a brief summary of the design Work Study approach for optimizing shipboard control systems, including an explanation of the formal procedural tools that are applicable. In addition, a practical case study of ship control system design for one of the latest classes of Navy destroyers will be presented. This example will illustrate the resultant savings and benefits that can be realized by a judicious application of this technique. © 1976 American Society of Naval Engineers

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE NAVAL SHIP RESEARCH AND DEVELOPMENT CENTER ADVANCED STRUCTURE FACILITYxs

引用

Naval Engineers Journal 1973年第1期85卷 43-49页

作者： BECKER, LOUIS A. SIEGRIST, FRANKLIN I. Louis A. Becker was born in New Rochelle N.Y. in 1930 receiving his earlier education in the New Rochelle Public Schools. He completed his undergraduate studies at Manhattan College in 1952 receiving his BCE degree during which time he was also engaged in land surveying. Following this he did postgraduate study at Virginia Polytechnic Institute obtaining his MS in 1954. He joined Naval Ship Research and Development Center in 1953 as a Junior Engineer and is currently the Head of the Engineering & Facilities Division Structures Department. His field of specialization is Structural Research and Development. Franklin I. Siegrist was born in Knoxville Tenn. in 1937 receiving his earlier education in the Public Schools of Erie Pa. He attended Pennsylvania State University graduating in 1962 with a Bachelor of Science degree in Electrical Engineering having prior to that time served four years in the U. S. Navy. He was a Junior Engineer in the AC Spark Plug Division of General Motors from 1962 until 1964 at which time he came to the David Taylor Model Basin as an Electrical Engineer in the Industrial Department. He is currently Supervisory Engineer for Electrical and Electronics Engineering Structures Department Naval Ship Research and Development Center. His field of specialization is Electrical Engineering Control Systems Data Collection Systems Computer Applications to Structural Research and Hydraulic System Design. In the last of these he holds Patent Rights on a “Hydraulic Supercharge and Cooling Circuit” granted in 1970.

来源：评论

学校读者我要写书评

暂无评论

WHY WATERJETS?

引用

Naval Engineers Journal 1967年第5期79卷 779-783页

作者： BERG, DAVID J. JONES, WALTER S. MARRON, HUGH W. David Berg a native of Michigan received his Bachelor's Degree in Mechanical Engineering from the Michigan Technological University in 1951 after which he began his career with the Bureau of Ships in the Machinery Design Branch on noise shock and vibration problems. He was project engineer for the axial flow pumpjet development on USS Witek (DD848) and USS Glover (AGDE1) and received his Master of Engineering Degree in Naval Architecture in 1964 from the University of California Berkeley. Mr. Berg is currently acting head of the Ship Performance and Trials Section of the Propulsion Systems Analysis Branch in the Naval Ship Engineering Center. He received the Meritorious Civilian Service Award in 1962 for contributions to the design of the USS Thresher (SSN593) and was awarded the Superior Performance Award for Outstanding Performance in 1966. Hugh Marron a native of Pennsylvania received his Bachelor of Science Degree in Civil Engineering from the Pennsylvania State University in 1939. Upon graduation he was employed for one year with the Pennsylvania Department of Highways as a construction engineer. In July 1940 he became a Marine Engineer at the Philadelphia Naval Shipyard where after a period of apprenticeship and special training in this new field he was assigned to the Machinery Scientific Group of the Design Division. Then in October 1945 he was transferred to the Design Division of the Bureau of Ships. Mr. Marron is now a Project Coordinator in the Propulsion Power and Auxiliary Systems Division of the Naval Ship Engineering Center. Walter S. Jones a native of Virginia graduated from the George Washington University with a BME in June 1958. From July of that year through June 1965 he served with the Machinery Design Branch of the Bureau of Ships where he was Project Engineer for the Hydroneu-matic Ram Jet and Water jet Propulsion Systems. Mr. Jones is currently the Machinery Coordinator for the Computer Aided Ship Design Program in the Naval Ship Engineering Center.

来源：评论

学校读者我要写书评

暂无评论

computer methods and use in ship design

引用

Naval Engineers Journal 1964年第N 6期v 76卷 p929-936页

作者： Anklowitz, P. THE AUTHOR:is a native of New Jersey. He graduated from Rutgers University in 1951 with a Bachelor of Science degree in Electrical Engineering and took graduate courses in engineering mathematics and computer technology at University of Maryland and American University and special computer operations courses from Electronics Associates Inc. (Analog) Royal McBee Corp. (Digital) and IBM (Digital). Upon graduation from Rutgers University he came to the Navy Department Bureau of Ships Design Division where he started in the Electrical Distribution Section of the Machinery Design Branch—Lighting Distribution Systems. He entered the Bureau of Ships Automatic Computer Group—Dynamic Analysis Section at its inception in 1953 where this group has evolved into the Coordinator for Computer-Aided Ship Design. He is the Assistant supervisor of this section and the supervisor of the Computer Services group and a Registered Professional Engineer (E.E.).

Review considers reasons for design of automation, difficulties in process, and practice of partial automation;five distinct design studies in design of naval ships are indicated and related to digital ship model evolved on basis of feasibility studies;further development work is noted and future ship design method suggested;design problems programmed by personnel of U S Bureau of Ships design Div and computer utilization programs at David Taylor Model Basin in field of surface ship design are listed. Before Assn Senior Engrs, U S Bur Ships.

关键词： Ships

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：