检索结果-内蒙古大学图书馆

International Workshop on Variable Structure Systems, VSS

作者： Edoardo Vacchini Michele Cucuzzella Pablo Borja Antonella Ferrara Department of Electrical Computer and Biomedical Engineering University of Pavia Pavia Italy Jan C. Willems Center for Systems and Control Engineering and Technology Institute Groningen (ENTEG) Faculty of Science and Engineering University of Groningen Groningen The Netherlands School of Engineering Computing and Mathematics University of Plymouth Plymouth U.K.

ISBN: (数字)9798350353686

ISBN: (纸本)9798350353693

This paper proposes a decentralized sliding mode control approach to the voltage regulation problem in a DC microgrid consisting of distributed generation units interconnected with each other through resistive-inductive power lines and supplying unknown nonlinear loads. In particular, the port-Hamiltonian structure of the system suggests the design of a suitable sliding manifold such that the system on this manifold exhibits desired passivity properties. This approach simplifies the control design and relaxes some restrictive assumptions required by other controllers proposed in the literature, while offering satisfactory performance.

关键词： Manifolds Variable structure systems Power transmission lines Microgrids Power system stability Stability analysis Robustness Reduced order systems Voltage control Sliding mode control

来源：评论

学校读者我要写书评

暂无评论

Skeleton-Based Multi-Stream Adaptive Graph Convolutional Network for Indoor Scene Action Recognition

Skeleton-Based Multi-Stream Adaptive Graph Convolutional Net...

引用

2023 China Automation Congress, CAC 2023

作者： Li, Jiazhuo Chen, Luefeng Li, Min Wu, Min Pedrycz, Witold Hirota, Kaoru The School of Automation The Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems The Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education China University of Geosciences Wuhan430074 China The Department of Electrical and Computer Engineering University of Alberta EdmontonABT6G 2R3 Canada The Systems Research Institute Polish Academy of Sciences Warsaw00-901 Poland The Department of Computer Engineering Istinye University Sariyer Istanbul34396 Turkey The Tokyo Institute of Technology Tokyo226-8502 Japan

ISBN: (纸本)9798350303759

With the rapid advances in computer vision, human action recognition has gradually received attention, but the current methods still exhibit some problems in indoor environments. The human skeleton, as the framework of human motion, contains high-quality actional feature information, and the skeleton-based action recognition method effectively avoid the interference of interior background noise and has advantages in indoor action recognition. The outstanding effect of graph convolutional networks on graph structure data processing has led to its rapid development and wide application in skeleton-based action recognition. Second-order skeletal information also contains a large number of actional features but is not effectively utilized. The artificial predefined topology of the human skeleton map has limitations, and cannot reflect the interaction between limbs. To solve the above problems, this article designs an adaptive weighted multi-stream graph convolutional network (AM-GCN) based on skeletal information, using an attention mechanism to enhance the network's ability to extract actional features, and an adaptive layer to make the construction graph more flexible, incorporating second-order skeletal features through a dual-stream architecture. In this article, the NTU-RGB+D dataset has been used for the experiments, the results show that the method in this article has good results. © 2023 IEEE.

关键词： Convolution

来源：评论

学校读者我要写书评

暂无评论

Evaluation of the Performance of Wearables’ Inertial Sensors for the Diagnosis of Resting Tremor in Parkinson’s Disease

Evaluation of the Performance of Wearables’ Inertial Sensor...

引用

17th International Joint Conference on Biomedical engineering Systems and Technologies, BIOSTEC 2024

作者： Polvorinos-Fernández, Carlos Sigcha, Luis de Pablo, Laura Pereira Borzí, Luigi Cardoso, Paulo Costa, Nelson Costa, Susana López, Juan Manuel de Arcas, Guillermo Pavón, Ignacio Mechanical Engineering Department ETSI Industriales Universidad Politécnica de Madrid Spain Group University of Limerick LimerickV94 T9PX Ireland ALGORITMI Research Center School of Engineering University of Minho Guimarães Portugal PolitoBIOMed Lab–Biomedical Engineering Lab Politecnico di Torino Turin10129 Italy ANTHEA Lab–Data Analytics and Technologies for Health Lab Department of Control and Computer Engineering Politecnico di Torino Turin10129 Italy Physical Electronics Electrical Engineering and Applied Physics Department ETS de Ingeniería y Sistemas de Telecomunicación Universidad Politécnica de Madrid Spain

Currently, objective monitoring of resting tremor in Parkinson’s disease (PD) involves wearable devices and machine learning. Smartwatches may present an affordable method for remote and unintrusive tremor monitoring. However, the development of optimized systems is necessary to perform accurate monitoring in free-living settings. In this study, the potential of inertial sensors to detect resting tremors is evaluated. A smartwatch was placed on the wrist of six subjects with PD during the execution of MDS-UPDRS motor tasks. Data were collected over eight weeks from triaxial accelerometer and gyroscope simultaneously and used to implement machine learning algorithms to detect resting tremor. The best performance (accuracy 97.0% in tremor detection) was achieved using accelerometer data analysed with a Random Forest classifier, while the gyroscope showed lower performance (93.0%). The results indicates that the use of the accelerometer in commercial smartwatches can offer effective results for detecting resting tremors, while reducing computational workload. These results show opportunities for the development of robust free-living tremor monitoring systems using commodity devices and algorithms using a single sensor. © 2024 by SCITEPRESS–Science and Technology Publications, Lda.

关键词： Gyroscopes

来源：评论

学校读者我要写书评

暂无评论

Robust control of Feeding Speed for Coal Mine Tunnel Drilling Machines

Robust Control of Feeding Speed for Coal Mine Tunnel Drillin...

引用

IEEE International Conference on Industrial Technology (ICIT)

作者： Xiao Liu Luefeng Chen Min Wu Weihua Cao Chengda Lu Witold Pedrycz School of Automation China University of Geosciences Wuhan China School of Automation the Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems and the Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan China Department of Electrical and Computer Engineering University of Alberta Edmonton Canada Department of Electrical and Computer Engineering University of Alberta Edmonton AB Canada Systems Research Institute Polish Academy of Sciences Warsaw Poland Department of Computer Engineering Istinye University Sariyer/Istanbul Turkey

ISBN: (数字)9798350340266

ISBN: (纸本)9798350340273

Changes in coal seam hardness cause fluctuations in the feed resistance at the drill bit during the drilling process, leading to unstable feeding speed. This paper proposes a robust dynamic output feedback controller to suppress disturbances caused by the variations in coal seam hardness in the feed system. Firstly, an unknown parameter measuring coal seam hardness is introduced, and an uncertain model of the feeding system is established based on the finite element model of the drill string. By designing weighted functions based on industrial field requirements and constructing a generalized plant, the controller achieves loop shaping, reducing the low-frequency impact of coal seam hardness variations on the feed system and suppressing the systems resonance peak. Simulation results demonstrate that the controller effectively suppresses parameter variations and external disturbances caused by changes in coal seam hardness, achieving stable control of the drilling speed.

关键词： Drilling Robust control Uncertainty Robust stability Simulation Coal Resonance

来源：评论

学校读者我要写书评

暂无评论

Plate Shape Prediction Based on Data-Driven in Roll Quenching Process

Plate Shape Prediction Based on Data-Driven in Roll Quenchin...

引用

2023 China Automation Congress, CAC 2023

作者： Hu, Liu Chen, Luefeng Hu, Jie Wu, Min Pedrycz, Witold Hirota, Kaoru School of Automation Ministry of Education China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems The Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China University of Alberta Department of Electrical and Computer Engineering EdmontonABT6R 2G7 Canada Systems Research Institute Polish Academy of Sciences Warsaw00-901 Poland Istinye University The Department of Computer Engineering Istanbul Sariyer34396 Turkey Tokyo Institute of Technology Tokyo Yokohama226-8502 Japan

ISBN: (纸本)9798350303759

In the process of steel plate production, predicting the plate shape is of great significance for producing high-quality and consistently stable plate shapes. This paper presents a model that predicts both the defect types and flatness of the plate, providing theoretical support for setting process parameters in roller quenching production. First, the parameters of the quenching process are analyzed to identify their characteristics. Then, the K-Means clustering algorithm and correlation analysis are employed to process the quenching process parameters. A gradient boosting decision tree (GBDT) model is used to predict the defect types and flatness of the steel plates. Finally, industrial production data is utilized for experimental validation. The obtained experimental results verify the reliability of the proposed method. © 2023 IEEE.

关键词： Decision trees

来源：评论

学校读者我要写书评

暂无评论

computer vision for road imaging and pothole detection:a state-of-the-art review of systems and algorithms

引用

Transportation Safety and Environment 2022年第4期4卷 3-18页

作者： Nachuan Ma Jiahe Fan Wenshuo Wang JinWu Yu Jiang Lihua Xie Rui Fan Department of Control Science and Engineering Frontiers Science Center for Intelligent Autonomous Systemsand State Key Laboratory of Intelligent Autonomous SystemsTongji UniversityShanghai 201804P.R.China Department of Civil Engineering McGill UniversityMontréalQC H3A 0C3Canada Department of Electronics and Computer Engineering the Hong Kong University of Science and TechnologyHong Kong SAR 999077P.R.China CTO Office ClearMotion Inc.BillericaMA 01821USA School of Electrical and Electronic Engineering Nanyang Technological University50 Nanyang Avenue639798Singapore

computer vision algorithms have been utilized for 3-D road imaging and pothole detection for over two ***,there is a lack of systematic survey articles on state-of-the-art(SoTA)computer vision techniques,especially deep learningmodels,developed to tackle these *** article first introduces the sensing systems employed for 2-D and 3-D road data acquisition,including camera(s),laser scanners and Microsoft *** then comprehensively reviews the SoTA computer vision algorithms,including(1)classical 2-D image processing,(2)3-D point cloud modelling and segmentation and(3)machine/deep learning,developed for road pothole *** article also discusses the existing challenges and future development trends of computer vision-based road pothole detection approaches:classical 2-D image processing-based and 3-D point cloud modelling and segmentation-based approaches have already become history;and convolutional neural networks(CNNs)have demonstrated compelling road pothole detection results and are promising to break the bottleneck with future advances in self/un-supervised learning for multi-modal semantic *** believe that this survey can serve as practical guidance for developing the next-generation road condition assessment systems.

关键词： computer vision road imaging pothole detection deep learning image processing point cloud modelling convolutional neural networks

来源：评论

学校读者我要写书评

暂无评论

Online Cooperative Optimal Power Scheduling of Multiple Microgrids via Hierarchical Imitation Learning

Online Cooperative Optimal Power Scheduling of Multiple Micr...

引用

International Conference on control and Automation (ICCA)

作者： Yunyi Zhao Shuhua Gao Jing Wang Congcong Li Ming Yu Cheng Xiang Department of Electrical and Computer Engineering National University of Singapore Singapore School of Control Science and Engineering Shandong University Jinan China State Grid Shandong Electric Power Company Marketing Service Center (Metering Center) Jinan China Power Automation Pte Ltd Singapore

ISBN: (数字)9798350354409

ISBN: (纸本)9798350354416

This paper looks into the issue of optimal power scheduling of multiple microgrids using hierarchical imitation learning. The system is designed to be a hierarchical learning model towards a two-level microgrid community (MGC) structure. The upper-level MGC agent uses an imitation learning algorithm to schedule exchange power between different microgrids, while lower-level microgrid agents are controlled by individual energy management systems using mixed-integer linear programming (MILP). In this paper, we focus on achieving economic dispatch in a large microgrid community while maintaining the privacy of the local microgrids. A simulation study of hierarchical imitation learning is provided based on an MGC system. Our results show the outstanding performance of the designed algorithm with a cost close to the centralized optimal results, about 10% improvement compared to the offline method, and very fast execution, which would be suitable for online power scheduling.

关键词： Training Schedules Privacy Costs Job shop scheduling Imitation learning Microgrids

来源：评论

学校读者我要写书评

暂无评论

Evaluation of OCA diffusivity in tissues through diffuse reflection spectroscopy

Evaluation of OCA diffusivity in tissues through diffuse ref...

引用

2022 International Conference Laser Optics, ICLO 2022

作者： Martins, I.S. Pinheiro, M.R. Silva, H.F. Tuchin, V.V. Oliveira, L.M. Center of Innovation in Engineering and Industrial Technology Isep Porto Portugal Porto University-School of Engineering Department of Electrical and Computer Engineering Porto Portugal Physics Department Porto Portugal Science Medical Center Saratov State University Saratov Russia Bach Institute of Biochemistry Frc of Biotechnology of the Russian Academy of Science Moscow Russia Institutc of Precision Mechanics and Control Frc 'Saratov Scientific Centre' of the Ras Saratov Russia

ISBN: (数字)9781665466646

ISBN: (纸本)9781665466646

The evaluation of the diffusion properties of optical clearing agents in biological tissues, which are necessary to characterize the transparency mechanisms, has been traditionally made using ex vivo tissues. With the objective of performing such evaluation in vivo, this study was made to evaluate and compare those properties for propylene glycol in skeletal muscle, as obtained with the collimated transmittance and diffuse reflectance kinetics. The diffusion time and the diffusion coefficient of propylene glycol in the muscle that were calculated both from transmittance and reflectance kinetics presented a deviation of 0.8%, a result that opens the possibility to use such a method in vivo. © 2022 IEEE.

关键词： Diffusion

来源：评论

学校读者我要写书评

暂无评论

Competitive Perimeter Defense of Conical Environments

Competitive Perimeter Defense of Conical Environments

引用

IEEE Conference on Decision and control

作者： Shivam Bajaj Eric Torng Shaunak D. Bopardikar Alexander Von Moll Isaac Weintraub Eloy Garcia David W. Casbeer Department of Electrical and Computer Engineering Michigan State University Department of Computer Science and Engineering Michigan State University Control Science Center Air Force Research Laboratory

ISBN: (数字)9781665467612

ISBN: (纸本)9781665467629

We consider a perimeter defense problem in a planar conical environment in which a single vehicle, having a finite capture radius, aims to defend a concentric perimeter from mobile intruders. The intruders are arbitrarily released at the circumference of the environment and they move radially toward the perimeter with fixed speed. We present a competitive analysis approach to this problem by measuring the performance of multiple online algorithms for the vehicle against arbitrary inputs, relative to an optimal offline algorithm that has information about entire input instance in advance. In particular, we establish two necessary conditions on the parameter space to guarantee (i) finite competitiveness of any algorithm and (ii) a competitive ratio of at least 2 for any algorithm. We then design and analyze three online algorithms and characterize parameter regimes in which they have finite competitive ratios. Specifically, our first two algorithms are provably 1, and 2-competitive, respectively, whereas our third algorithm exhibits different competitive ratios in different regimes of problem parameters. Finally, we provide a numerical plot in the parameter space to reveal additional insights into the relative performance of our algorithms.

关键词： Atmospheric measurements Aerospace electronics Particle measurements

来源：评论

学校读者我要写书评

暂无评论

Extension Principle and controller Design for Nonlinear Systems

Extension Principle and Controller Design for Nonlinear Syst...

引用

European control Conference (ECC)

作者： Altuğ İftar Farshad Khorrami Department of Electrical and Electronics Engineering Eskişehir Technical University Eskişehir Turkey Department of Electrical and Computer Engineering Control/Robotics Research Laboratory (CRRL) New York University 5 Metrotech Center Brooklyn NY U.S.A.

We generalize the principle of extension and controller design using this principle for nonlinear systems. We first define principles of inclusion and extension for nonlinear time-invariant (NLTI) systems. Thereafter, we present the necessary and sufficient conditions for a system to be an extension of another and show that when the expanded system is an extension of the original system, any controller designed for the expanded system can be contracted for implementation on the original system. Subsequently, we demonstrate how an overlappingly decomposed NLTI system can be expanded so that the expanded system is an extension of the original system, how decentralized controllers can be designed for the expanded system, and how these controllers can be contracted for implementation on the original system. An example is also provided to illustrate the extension and contraction concepts and show controller design using the proposed principles.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：