检索结果-内蒙古大学图书馆

Optimizations and applications in large-scale scenes of Monte Carlo geometry conversion code CMGC

Nuclear Science and Techniques 2025年第4期36卷 220-232页

作者： Xin Wang Ling-Yu Zhang Xue-Ming Shi Zhen Wu Jun-Li Li Gui-Ming Qin Yuan-Guang Fu CAEP Software Center for High Performance Numerical Simulation Beijing 100088China Institute of Applied Physics and Computational Mathematics Beijing 100088China Department of Engineering Physics Tsinghua UniversityBeijing 100084China

In response to the demand for rapid geometric modeling in Monte Carlo radiation transportation calculations for large-scale and complex geometric scenes,functional improvements,and algorithm optimizations were performed using CAD-to-Monte Carlo geometry conversion(CMGC)*** representation(BRep)to constructive solid geometry(CSG)conversion and visual CSG modeling were combined to address the problem of non-convertible geometries such as spline *** splitting surface assessment method in BRep-to-CSG conversion was optimized to reduce the number of Boolean operations using an Open ***,in turn,reduced the probability of CMGC conversion *** auxiliary surface generation algorithm was optimized to prevent the generation of redundant auxiliary surfaces that cause an excessive decomposition of CAD geometry *** optimizations enhanced the usability and stability of the CMGC model *** was applied successfully to the JMCT transportation calculations for the conceptual designs of five China Fusion engineering Test Reactor(CFETR)*** rapid replacement of different blanket schemes was achieved based on the baseline CFETR *** geometric solid number of blankets ranged from hundreds to tens of *** correctness of the converted CFETR models using CMGC was verified through comparisons with the MCNP calculation *** CMGC supported radiation field evaluations for a large urban scene and detailed ship *** enabled the rapid conversion of CAD models with thousands of geometric solids into Monte Carlo CSG *** analysis of the JMCT transportation simulation results further demonstrated the accuracy and effectiveness of the CMGC.

关键词： Monte Carlo CAD BRep to CSG CMGC

来源：评论

学校读者我要写书评

暂无评论

Effect of leading-edge and trailing-edge camber morphing on gust load for an elastic wing

引用

Chinese Journal of Aeronautics 2025年第4期38卷 204-220页

作者： Yuting DAI Yating HU You WU Chen SONG Chao YANG School of Aeronautic Science and Engineering Beihang UniversityBeijing 100191China Tianmushan Laboratory Hangzhou 311115China CAEP Software Center for High-Performance Numerical Simulation Beijing 100088China Institute of Applied Physics and Computational Mathematics Beijing 100088China

This paper investigates the influence of the spanwise-distributed trailing-edge camber morphing on the dynamic stall characteristics of a finite-span wing at Re=2×10^(5).The mathematical model of the spanwise-distributed trailing-edge camber morphing is established based on Chebyshev polynomials,and the deformed wing surface is modeled by a spline surface according to the rib's morphing in the chordwise *** Computational Fluid Dynamics(CFD)method is adopted to obtain flow-field results and aerodynamic *** SST-γmodel is introduced and the overset mesh technique is *** numerical results show that the spanwisedistributed trailing-edge morphing obviously changes the aerodynamic and energy transfer characteristics of the dynamic *** when the phase difference between the trailing-edge motion and the wing pitch is-π/2,the interaction between the three-dimensional(3-D)Leading-Edge Vortex(LEV)and Trailing-Edge Vortex(TEV)is strengthened,and the work done by the aerodynamic force turns *** indicates that the trailing-edge deformation has the potential to suppress the oscillation amplitude of stall *** also found that as the trailing-edge camber morphing varies more complexly along the spanwise direction,the suppression effect decreases accordingly.

关键词： Fluid-structure interaction Wing morphing Gust load alleviation Unsteady flow Phase offset

来源：评论

学校读者我要写书评

暂无评论

Domain-Decomposition Localized Method of Fundamental Solutions for Large-Scale Heat Conduction in Anisotropic Layered Materials

引用

Advances in Applied Mathematics and Mechanics 2022年第3期14卷 759-776页

作者： Shuainan Liu Zhuojia Fu Yan Gu Center for Numerical Simulation Software in Engineering and Sciences College of Mechanics and MaterialsHohai UniversityNanjingJiangsu 211100China School of Mathematics and Statistics Qingdao UniversityQingdaoShandong 266071China

The localized method of fundamental solutions(LMFS)is a relatively new meshless boundary collocation *** the LMFS,the global MFS approxima-tion which is expensive to evaluate is replaced by local MFS formulation deﬁned in a set of overlapping *** LMFS algorithm therefore converts differential equations into sparse rather than dense matrices which are much cheaper to *** paper makes theﬁrst attempt to apply the LMFS,in conjunction with a domain-decomposition technique,for the numerical solution of steady-state heat con-duction problems in two-dimensional(2D)anisotropic layered ***,the layered material is decomposed into several subdomains along the layer-layer inter-faces,and in each of the subdomains,the solution is approximated by using the LMFS *** the subdomain interface,compatibility of temperatures and heatﬂuxes are *** numerical experiments illustrate that the proposed domain-decomposition LMFS algorithm is accurate,stable and computationally efﬁcient for the numerical solution of large-scale multi-layered materials.

关键词： Meshless method localized method of fundamental solutions heat conduction prob-lems layered materials large-scale problems

来源：评论

学校读者我要写书评

暂无评论

Swin Transformer-based Cross-view Attention Network for Stereo Image Super-Resolution 6

Swin Transformer-based Cross-view Attention Network for Ster...

引用

6th IEEE International Conference on Pattern Recognition and Artificial Intelligence, PRAI 2023

作者： Li, Xue Zhang, Hongying Zhang, Laiping Ye, Zixun Pu, Juntao Yuan, Mingdong Southwest University of Science and Technology School of Information Engineering Mianyang China Sichuan University Tianfu Engineering Center for Numerical Simulation and Software Innovation Chengdu China

ISBN: (纸本)9798350325485

Stereo image pairs offer complementary information that can improve the performance of image super-resolution reconstruction significantly. However, integrating longrange dependencies between stereo image pairs into super-resolution is challenging. This paper proposes a Swin Transformer-based cross-view attention network for stereo image super-resolution (TCASSRnet) to address this issue. Firstly, TCASSRnet extracts stereo image pair features using a Transformer with a shallow residual block (SRB). Next, a cross-view attention model (CAM) is introduced to integrate complementary features of stereo image pairs, resulting in high-frequency and low-frequency attention maps. Finally, deep residual blocks (DRBs) are employed to restore image details layer by layer and reconstruct super-resolution images. Extensive experimental results demonstrate the effectiveness of TCASSRnet. Specifically, TCASSRnet outperforms the baseline network (PASSRnet) by 0.55 dB in terms of PSNR on the Middlebury dataset for 4× SR, while the parameter size of TCASSRnet is reduced by 50% compared to the recent SSRDE-Fnet. © 2023 IEEE.

关键词： Image enhancement

来源：评论

学校读者我要写书评

暂无评论

Gamma ray multiplicity of a^(240)Pu solid sphere simulated by JMCT

引用

Nuclear Science and Techniques 2022年第5期33卷 8-15页

作者： Huan-Huan Ding Fan Gao Chang-Bing Lu Rui Li Chen-Guang Li Zhao-Hong Mo Dun-Fu Shi Ming Su De-Shan Zhao Mao-Bing Shuai Zhong-Hua Xiong Bin-Yuan Xia Yun Bai Institute of Materials China Academy of Engineering PhysicsMianyang 621908China The 93147th Unit of PLA Mianyang 621000China CAEP Software Center for High Performance Numerical Simulation Beijing 100088China Institute of Applied Physics and Computational Mathematics Beijing 100088China

Determining the mass of plutonium metal is an important research objective in the field of nuclear material accounting and *** on the 3D neutron and photon transport code JMCT(Jointed Monte Carlo Transport),the gamma ray multiplicity of ^(240)Pu was simulated in this study,and the average number of gamma rays leaking from ^(240)Pu solid spheres with different masses was also *** simulation results show that there is a oneto-one correspondence between the average number of gamma rays and the mass of ^(240)Pu solid spheres in the range of 0.50–3.00 *** result provides a basis for using the average number of gamma rays to account for the mass of ^(240)Pu.

关键词： ^(240)Pu JMCT Gammaraymultiplicity Solid sphere mass Surface-to-volumeratio

来源：评论

学校读者我要写书评

暂无评论

simulation of the Total Ionization Dose Effect of Gate-Controlled Lateral PNP Bipolar Transistors 4

Simulation of the Total Ionization Dose Effect of Gate-Contr...

引用

4th International Conference on Radiation Effects of Electronic Devices, ICREED 2021

作者： Ma, Zhaocan Li, Guangrong Zhao, Zhenguo Wang, Weijie CAEP Software Center for High Performance Numerical Simulation Beijing100088 China CAEP Software Center for High Performance Numerical Simulation China Academy of Engineering Physics Beijing100088 China

ISBN: (纸本)9781665441681

In order to study the total dose effect and hardness assurance technology for the bipolar devices, various technologies are performed on Gate-Controlled Lateral PNP bipolar junction transistors (BJT). Modeling of defect complexes is accomplished by adding an additional drift-diffusion equation for trapped holes and interface traps, which are calculated by gate sweep characterization technique. Combined with the coupled ionization damage trap model, ionization damage effects on GCLPNP are simulated on the semiconductor multi-physical parallel computing program JEMS-CDS-Device, a domestic software solve electric-carrier transport-thermal problem. The phenomena of excess base current and current gain degradation in GCLPNP Gummel sweep are successfully simulated via numerical calculation. © 2021 IEEE

关键词： Bipolar transistors

来源：评论

学校读者我要写书评

暂无评论

Comparison of Reproducible Parallel Preconditioned BiCGSTAB Algorithm Based on ExBLAS and ReproBLAS 23

Comparison of Reproducible Parallel Preconditioned BiCGSTAB ...

引用

6th International Conference on High Performance Computing in Asia-Pacific Region, HPC Asia 2023

作者： Lei, Xiaojun Gu, Tongxiang Graillat, Stef Xu, Xiaowen Meng, Jing Graduate School of Chinese Academy of Engineering Physics China Institute of Applied Physics and Computational Mathematics China Sorbonne University France CAEP Software Center for Numerical Simulation China School of Mathematics and Statistics Taishan University China

ISBN: (纸本)9781450398060

Krylov subspace algorithms are important methods for solving linear systems. In order to efficiently solve large-scale linear systems, parallelism techniques are often applied. However, parallelism often enlarge the non-Associativity of floating-point operations, which can lead to non-reproducibility of the computations. This paper compares the performance of the parallel preconditioned BiCGSTAB algorithm implemented with two different libraries (ExBLAS and ReproBLAS) that can ensure the reproducibility of computations. To address the effect of the compiler, we explicitly utilize the FMA instructions. Finally, numerical experiments show that based on two BLAS implementations, the BiCGSTAB algorithms are reproducible. By contrast, the BiCGSTAB algorithm based on ExBLAS is more accurate but more time-consuming than the one based on ReproBLAS. © 2023 ACM.

关键词： Digital arithmetic

来源：评论

学校读者我要写书评

暂无评论

A Structured Grid Generation Scheme Based on Multi-Block Topology and Elliptic Pde Optimizer for Rotating Machinery

SSRN

引用

SSRN 2023年

作者： Huang, Longlong Wang, Nianhua Liu, Cheng Si, Songlin Liu, Dong Huang, Siyuan Tianfu Engineering-Oriented Numerical Simulation & Software Innovation Center Sichuan University Sichuan Chendu China

With the widespread application of numerical simulation in aeroengine, it is crucial to automatically and efficiently generate structured grids for rotating components. Therefore, a comprehensive automatic structured grid generation scheme has been established. This system is based on multi-block structured grid generation methods including automatic generation of geometric models, construction of topologies, generation and optimization of grids. The generated grids were compared with commercial software, and the results show that this system implements an integrated platform from geometric modeling to multi-block structured grid generation. Firstly, For the Rotor37 model, LONGCHI-Grid has increased the efficiency of grid generation by about 60%, and the four evaluation indicators have been improved by 34.5%, 55.6%, 57.0%, and 69.2% compared to the traditional manual meshing mode, respectively. Furthermore, compared to the AutoGrid, this system has improved the Max aspect ratio and Max expansion factor by 39.6% and 25.0%, respectively. However, for fans with large blade distortion, there is not significantly different between them, except for a 56.9% decrease in max aspect ratio. For complex multi-stage compressors, the max aspect ratio has improved by 48.7%, while slightly decrease in other indicators. Finally, numerical simulations were conducted to compare the results of both schemes, and the consistency results verified the feasibility of the established program. This system provides technical support for the application of numerical simulation techniques in aeroengine. © 2023, The Authors. All rights reserved.

关键词： Aspect ratio

来源：评论

学校读者我要写书评

暂无评论

Multi-perception large kernel convnet for efficient image super-resolution

引用

四川大学学报(自然科学版) 2025年第1期62卷 67-78页

作者： MIAO Xuan LI Zheng XU Wen-Zheng College of Computer Science(College of Software) Sichuan UniversityChengdu 610065China Tianfu Engineering-Oriented Numerical Simulation&Software Innovation Center Sichuan UniversityChengdu 610207China

Significant advancements have been achieved in the field of Single Image Super-Resolution(SISR)through the utilization of Convolutional Neural Networks(CNNs)to attain state-of-the-art *** efforts have explored the incorporation of Transformers to augment network performance in ***,the high computational cost of Transformers makes them less suitable for deployment on lightweight ***,the majority of enhancements for CNNs rely predominantly on small spatial convolutions,thereby neglecting the potential advantages of large kernel *** this paper,the authors propose a Multi-Perception Large Kernel convNet(MPLKN)which delves into the exploration of large kernel ***,the authors have architected a Multi-Perception Large Kernel(MPLK)module aimed at extracting multi-scale features and employ a stepwise feature fusion strategy to seamlessly integrate these *** addition,to enhance the network's capacity for nonlinear spatial information processing,the authors have designed a Spatial-Channel Gated Feed-forward Network(SCGFN)that is capable of adapting to feature interactions across both spatial and channel *** results demonstrate that MPLKN outperforms other lightweight image super-resolution models while maintaining a minimal number of parameters and FLOPs.

关键词： Single Image Super-Resolution Lightweight model Deep learning Large kernel

来源：评论

学校读者我要写书评

暂无评论

基于SO(3)群几何精确Kirchhoff梁理论的细长梁动力学

引用

Acta Mechanica Sinica 2024年第4期40卷 212-225页

作者：安志朋王斌侯云森刘铖 MOE Key Laboratory of Dynamics and Control of Flight Vehicle School of Aerospace EngineeringBeijing Institute of TechnologyBeijing100081China CAEP Software Center for High Performance Numerical Simulation Beijing100088China Institute of Applied Physics and Computational Mathematics Beijing100088China

本研究旨在开发一种高效的细长梁单元,精确描述细长柔性结构的大变形和大旋转,在现有细长梁单元研究的基础上,提出一种基于SO(3)群活动标架的二阶几何精确Kirchhoff梁单元(GEKBF),用于细长梁的动力学研究.首先,在此标架中推导出运动学... 详细信息

本研究旨在开发一种高效的细长梁单元,精确描述细长柔性结构的大变形和大旋转,在现有细长梁单元研究的基础上,提出一种基于SO(3)群活动标架的二阶几何精确Kirchhoff梁单元(GEKBF),用于细长梁的动力学研究.首先,在此标架中推导出运动学描述和几何、本构和动态平衡方程及其线性化.然后,引入相对扭转角的二阶插值函数,以提高单元的收敛性,通过选择合适的标架来开发旋转矢量参数化.它可以显著减少由刚体旋转引起的几何非线性,并提高描述当前标架下单元旋转公式的计算效率.此外,考虑了参考标架的影响,并使用空间平行移动而非时间平行移动,简化了弹性力和雅可比矩阵的推导.使用李群广义α-方法求解李群上的半离散运动方程.最后,通过数值实例验证了GEKBF的准确性,包括静力学和动力学.

关键词：平行移动标架弹性力旋转矢量细长梁柔性结构半离散动态平衡

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：