检索结果-内蒙古大学图书馆

第30届中国过程控制会议（CPCC 2019）

作者： CAO-Chao CHEN-Xin WANG-Jingcheng SHI-Yuanhao Department of Automation Shanghai Jiao Tong University and Key Laboratory of System Control and Information Processing Ministry of Education of China Autonomous Systems and Intelligent Control International Joint Research Center Xi'an Technological University School of Electrical and Control Engineering North University of China

The problem of ash and slagging on the heating surface of coal-fired power station boilers has always existed in the production and operation process of modern coal-fired power *** smog and slagging on the heated surface will not only cause the heat exchange efficiency to deteriorate, but also cause safety accidents such as corrosion of the heated surface and tube *** order to solve this problem, it is necessary to monitor the ash deposition of the boiler heating surface and develop a pollution degree standard for the soot blowing *** paper presents a monitoring model based on the ash deposition of the economizer heating surface of a coal-fired power station *** the boiler of 600 MW generator set of a power plant in Jiaxing, Zhejiang as the research object, the measured data obtained by the on-site DCS, then the wavelet denoising process, and then the thermodynamic formula is used to calculate the ash pollution factor which can characterize the degree of ash deposition on the heated surface of the *** experimental results prove the validity of the above model and have important significance for the later research on intelligent soot blowing operation

关键词： Coal-fired power plant boiler Economizer Ash deposition Monitoring model,Cleanliness factor

来源：评论

学校读者我要写书评

暂无评论

An accurate stop control method of high-speed rolling machine for automobile production line using laser ranging and two positon close loop

引用

Journal of Physics: Conference Series 2021年第1期1798卷

作者： Zhifeng Qiao Weimin Ge Haikang Zhang Huiyong Wei Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin 300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education (Tianjin University of Technology) Automotive Engineering Corporation (AE) NO.591 Changjiang Road Nankai District Tianjin China

The high-speed rolling machine is a key equipment in the automatic production line of automobile body-in-white welding. This article focuses on analyzing a method for accurately stopping the high-speed rolling machine using laser distance measurement. Firstly, through the analysis of the movement process, the calculation method of the length of each period in the 7-stage S-type acceleration and deceleration in the movement of the high-speed rolling machine is given; secondly, the system control theory model of the measurement and control system is established to analyze the dual-position closed-loop strategy The method of realizing the accurate stopping of the high-speed rolling machine; finally, the accurate stopping control method of the high-speed rolling machine proposed in this paper was verified by building an experimental system and developing the corresponding control program.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Optimization design of superconducting cusp magnetic field structure 13

Optimization design of superconducting cusp magnetic field s...

引用

13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018

作者： Shangbin, Jiao Dongbin, Hou Ding, Liu Weichao, Huang Natl. and Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Xi'an710048 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xian710048 China

ISBN: (纸本)9781538637579

Based on the analysis of the Cusp magnetic field suppression convection principle, the simulation model of superconducting Cusp magnetic field is built by the finite element method. In the case of satisfying the magnetic field strength of the crucible wall and giving the excitation current, the number of layers of the superconducting coil is calculated by using the established model. The influence of coil spacing, thickness of shielding thickness, horizontal distance between coil and shielding thickness and longitudinal distance on magnetic induction strength, horizontal distance and longitudinal distance between coil and the shielding are analyzed under the condition that the number of superconducting coils is constant. The influence of the force on the coil, the influence of the thickness of the shielding body on the magnetic leakage strength of the magnetic field. The simulation results show that the optimized Cusp magnetic field structure parameters can be used in the actual design. © 2018 IEEE.

关键词： Finite element method

来源：评论

学校读者我要写书评

暂无评论

intelligent Physical Attack Against Mobile Robots With Obstacle-Avoidance

arXiv

引用

arXiv 2019年

作者： Li, Yushan He, Jianping Chen, Cailian Guan, Xinping The Department of Automation Shanghai Jiao Tong University Shanghai200240 China Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai200240 China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai200240 China

The security issue of mobile robots has attracted considerable attention in recent years. In this paper, we propose an intelligent physical attack to trap mobile robots into a preset position by learning the obstacle-avoidance mechanism from external observation. The salient novelty of our work lies in revealing the possibility that physical-based attacks with intelligent and advanced design can present real threats, while without prior knowledge of the system dynamics or access to the internal system. This kind of attack cannot be handled by countermeasures in traditional cyberspace security. To practice, the cornerstone of the proposed attack is to actively explore the complex interaction characteristic of the victim robot with the environment, and learn the obstacle-avoidance knowledge exhibited in the limited observations of its behaviors. Then, we propose shortest-path and hands-off attack algorithms to find efficient attack paths from the tremendous motion space, achieving the driving-to-trap goal with low costs in terms of path length and activity period, respectively. The convergence of the algorithms is proved and the attack performance bounds are further derived. Extensive simulations and real-life experiments illustrate the effectiveness of the proposed attack, beckoning future investigation for the new physical threats and defense on robotic systems. Copyright © 2019, The Authors. All rights reserved.

关键词： Mobile robots

来源：评论

学校读者我要写书评

暂无评论

Research on Computer Network Technology system Based on Artificial Intelligence Technology

引用

Journal of Physics: Conference Series 2021年第4期1802卷

作者： Jinling Yao Jie Liu College of Electronic Information and Engineering Tianjin Vocational institute Tianjin 300000 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin 300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education (Tianjin University of Technology) Tianjin 300384 China

This article introduces computer network intrusion detection systems and their classification based on artificial intelligence technology, and points out the challenges that intrusion detection systems (IDS) are facing in wireless sensor computer networks. On this basis, a hierarchical multi-layer wireless sensor network intrusion detection system and technology based on artificial intelligence technology Agent is proposed, and its network structure, working principle and performance are analysed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Biomechanical Comparison of Lateral Interbody Fusion with and without Fixation

Biomechanical Comparison of Lateral Interbody Fusion with an...

引用

IEEE International Conference on Mechatronics and Automation

作者： Cheng-Fei Du Meng-Si Sun Xin-Yi Cai Chen-Xi Yuchi National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China

Objective: To compare biomechanical behaviors of lumbar lateral interbody fusion with and without posterior fixation. Methods: Three kinds of three-dimensional nonlinear finite element models of lumbar vertebrae (L3-S1) were developed: traditional lateral interbody fusion with bilateral pedicle 4 screws and 2 rods internal fixation; only lateral interbody fusion; intact model. The models were supported to a 500N follower load with a 7.5-N.m moment of flexion, extension,lateral bending,and rotation. The change of the range of motion (ROM) and intervertebral disc pressure (IDP) of the surgical segment and adjacent segments are compared. Results: Compared with the intact model, both surgical methods reduce the range of motion at the surgical segment in all motion modes, but have almost no effect on adjacent segments. The addition of fixation induce the further reduction of ROM in the surgical segment, and the ROM is almost 0° in all motion modes except for rotation. While for the model of only lateral interbody fusion, the ROM range from 0.4° to 2.2°. Moreover, the variation of the intervertebral disc pressure in surgery groups are extremely subtle in all the segments and all the postures. Conclusion: Compared to the only lateral interbody fusion,the traditional internal fixation with bilateral pedicle 4 screws and 2 rods for lateral interbody fusion showed more bimechanical stability of the surgical segment. The extra fixation for lumbar lateral interbody fusion is indispensable for surgeon.

关键词： Surgery Finite element analysis Read only memory Spine Motion segmentation Biological system modeling Fasteners

来源：评论

学校读者我要写书评

暂无评论

The Biomechanical Response of Cervical Spine under Different Follower Loads

The Biomechanical Response of Cervical Spine under Different...

引用

IEEE International Conference on Mechatronics and Automation

作者： Cheng-Fei Du Xin-Yi Cai Meng-Si Sun National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China

The follower load is a synergy of the mimicking the human muscle tissue. It can improve load-carrying capacity of the human cervical spine and play an important part in maintaining the stability of cervical spine. Currently, the studies of the influence of a follower load on biomechanics of cervical spine is still not perfect. Therefore, this paper used the finite element (FE) modeling method to investigate the biomechanical response of cervical spine under different follower loads. The range of motion (ROM) of and intradiscal pressure (IDP) in the cervical spine were important parameters reflecting the condition of the cervical spine. So a three-dimensional (3D) nonlinear finite element model of the cervical spine (C3-C7) was built and validated. Under different follower loads (0 N, 50 N, 100 N, 150 N), a moment of 1 Nm was applied in the three anatomical planes to study the the influence of the follower load on the range of motion and intradiscal pressure in cervical spine. The results indicated that follower load reduced the ROM of cervical spine in extension, and in other postures increased the ROM. The most significant effect of the follower load on cervical spine was in torsion (55%), lateral bending (50%) and flexion (17%). In all postures, the IDP of cervical spine increased with the follower load increased, at the same the IDP changed nonlinearly with the follower load increased.

关键词： Read only memory Finite element analysis Load modeling In vitro Solid modeling Bending Spine

来源：评论

学校读者我要写书评

暂无评论

0.75 Gbit/s high-speed classical key distribution with mode-shift keying chaos synchronization of Fabry-Perot lasers

arXiv

引用

arXiv 2020年

作者： Gao, Hua Wang, Anbang Wang, Longsheng Jia, Zhiwei Guo, Yuanyuan Gao, Zhensen Yan, Lianshan Qin, Yuwen Wang, Yuncai Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education and Shanxi Province Taiyuan China College of Physics and Optoelectronics Taiyuan University of Technology Taiyuan China School of Information Engineering Guangdong University of Technology Guangzhou China Guangdong Provincial Key Laboratory of Photonics Information Technology Guangzhou China Center for Information Photonics and Communications School of Information Science and Technology Southwest Jiaotong University Chengdu China

High-speed physical key distribution is diligently pursued for secure communication. In this paper, we propose and experimentally demonstrate a scheme of high-speed key distribution using mode-shift keying chaos synchronization between two multi-longitudinal-mode Fabry–Perot lasers commonly driven by a super-luminescent diode. Legitimate users dynamically select one of the longitudinal modes according to private control codes to achieve mode-shift keying chaos synchronization. The two remote chaotic light waveforms are quantized to generate two raw random bit streams, and then those bits corresponding to chaos synchronization are sifted as shared keys by comparing the control codes. In this method, the transition time, i.e., the chaos synchronization recovery time is determined by the rising time of the control codes rather than the laser transition response time, so the key distribution rate is improved greatly. Our experiment achieved a 0.75-Gbit/s key distribution rate with a bit error rate of 3.8 × 10-3 over 160-km fiber transmission with dispersion compensation. The entropy rate of the laser chaos is evaluated as 16 Gbit/s, which determines the ultimate final key rate together with the key generation ratio. It is therefore believed that the method pays a way for Gbit/s physical key distribution. © 2020, CC0.

关键词： Synchronization

来源：评论

学校读者我要写书评

暂无评论

Gradient piezoelectric composites for ultrasonic transducer design and imaging applications

引用

Journal of Materiomics 2025年第6期11卷

作者： Chenxue Hou Zhaoxi Li Chunlong Fei Qibo Lin Xiaofei Luo Xiongwei Wei Yiheng Yang Qi Lu Yi Quan Guangzhi Dong Zeyu Chen Xiaozhou Lü Weimin Bao Yintang Yang Shaanxi Provincial Key Laboratory of Integrated Circuit and System Integration Faculty of Integrated Circuit Xidian University Xi'an 710071 China The State Key Laboratory of Analog and Mixed-Signal VLSl Institute of Microelectronics University of Macau Macao 999078 China School of Aerospace Science and Technology Xidian University Xi'an 710071 China State Key Laboratory of Precision Manufacturing for Extreme Service Performance College of Mechanical and Electrical Engineering Central South University Changsha 410083 China College of Automotive and Mechanical Engineering Changsha University of Science and Technology Changsha 410114 China Hunan Province University Key Laboratory of Intelligent Testing and Control Technology for Engineering Equipment Changsha 410114 China School of Advanced Materials and Nanotechnology Xidian University Xi'an 710126 China Furong Laboratory (Precision Medicine) Changsha 410008 China National Engineering Research Center of Personalized Diagnostic and Therapeutic Technology Xiangya Hospital Central South University Changsha 410008 China Hunan Engineering Research Center of Skin Health and Disease Xiangya Hospital Central South University Changsha 410008 China

Ultrasonic imaging technology has advanced rapidly, the escalating demand for imaging quality has driven the continuous development of ultrasonic transducers featuring high-performance. Among them, the crucial factors constraining the further enhancement of imaging quality are the frequency of the device and the intensity of the echo signal. Piezoelectric composites have become a hotspot for ultrasonic transducers and imaging applications due to their excellent properties. However, due to the limitations of the accuracy of the cutting process, the development of piezoelectric/polymer composites is often undermined by undesirable pseudo-vibrations, especially in high-frequency applications, which will significantly reduce energy conversion efficiency. In this study, a novel design method of 1–3 piezoelectric composites with gradient nanoparticle doped polymer is proposed to eliminate the undesired lateral vibrations. Based on the optimized composites, a high-performance composite ultrasonic transducer with a center frequency of 8.51 MHz is prepared. Compared with the traditional composite transducer, the optimized transducer improves the echo voltage amplitude significantly, reaching nearly 3 times. The above advantages are further verified in high-quality ultrasound and photoacoustic imaging. The optimization method has valuable guidance for the design of high-frequency composite transducers, which have great potential in ultrasonic and photoacoustic imaging applications.

关键词： Piezoelectric composites Ultrasonic transducer Imaging applications Lateral vibration Finite element analysis

来源：评论

学校读者我要写书评

暂无评论

Application of PID control based on BP neural network in the expansion machine of organic Rankine cycle system

Application of PID control based on BP neural network in the...

引用

Geothermal Resources Council 2018 Annual Meeting: Geothermal's Role in Today's Energy Market, GRC 2018

作者： He, Ruijie Wang, Zhigang Fu, Wencheng Tianjin Key Laboratory Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering United States National Demonstration Center Experimental Mechanical and Electrical Engineering Education United States Tianjin University of Technology China

ISBN: (纸本)0934412235

With the rapid development of China's economy, the relative shortage of energy has become one of the important factors restricting economic and social development. At present, the research and development of energy-saving technology in industrial process have important practical significance. The Organic Rankine Cycle (ORC) system is considered to be a technology for the efficient use of low-temperature heat energy, and many researchers have made efforts on the efficiency of ORC system. In this paper, the dynamic performance of the system is adjusted by using the neural network-based PID control method for the expander in the system. Firstly, the control model of the expander in the system is established, and then the control algorithm is applied to the controlled object to make the system run efficiently. The simulation results show that the algorithm has a good control effect compared with the traditional PID control. This control method can effectively improve the efficiency of ORC system. © 2018 International Journal of Caring Sciences. All rights reserved.

关键词： Rankine cycle

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：