检索结果-内蒙古大学图书馆

Techno-economic analysis of green hydrogen as an energy-storage medium for commercial buildings

Clean Energy 2023年第1期7卷 84-98页

作者： Rahul Rajeevkumar Urs Assia Chadly Ameena Al Sumaiti Ahmad Mayyas Department of Industrial and Systems Engineering Khalifa UniversityAbu Dhabi 127788UAE Department of Electrical Engineering and Computer Science Advanced Power and Energy CenterKhalifa UniversityAbu Dhabi 127788UAE

Green-hydrogen production is vital in mitigating carbon emissions and is being adopted *** its transition to a more diverse energy mix with a bigger share for renewable energy,United Arab Emirates(UAE)has committed to investing billions of dollars in the production of green *** study presents the results of the techno-economic assessment of a green-hydrogen-based commercial-building microgrid design in the *** microgrid has been designed based on the building load demand,green-hydrogen production potential utilizing solar photovoltaic(PV)energy and discrete stack reversible fuel cell electricity generation during non-PV *** the current market conditions and the hot humid climate of the UAE,a performance analysis is derived to evaluate the technical and economic feasibility of this *** study aims at maximizing both the building microgrid’s independence from the main grid and its renewable *** results indicate that the designed system is capable of meeting three-quarters of its load demand independently from the main grid and is supported by a 78%renewable-energy *** economic analysis demonstrates a 3.117-$/kg levelized cost of hydrogen production and a 0.248-$/kWh levelized cost for storing hydrogen as ***,the levelized cost of system energy was found to be less than the current utility costs in the *** analysis shows the significant impact of the capital cost and discount rate on the levelized cost of hydrogen generation and storage.

关键词： fuel cell electrolyser green hydrogen microgrid photovoltaic

来源：评论

学校读者我要写书评

暂无评论

Evolutionary Optimization Methods for High-Dimensional Expensive Problems:A Survey

引用

IEEE/CAA Journal of Automatica Sinica 2024年第5期11卷 1092-1105页

作者： MengChu Zhou Meiji Cui Dian Xu Shuwei Zhu Ziyan Zhao Abdullah Abusorrah Department of Electrical and Computer Engineering New Jersey Institute of TechnologyNewarkNJ 07102 USA School of Information and Electronic Engineering Zhejiang Gongshang UniversityHangzhou 310018China School of Intelligent Manufacturing Nanjing University of Science and TechnologyNanjing 210094China Institute of Systems Engineering Macao University of Science and TechnologyMacao 999078China School of Artificial Intelligence and Computer Jiangnan UniversityWuxi 214122China School of Information Science and Engineering Northeastern UniversityShenyang 110819China Center of Research Excellence in Renewable Energy and Power Systems Department of Electrical and Computer EngineeringFaculty of EngineeringKing Abdulaziz UniversityJeddah 21589Saudi Arabia K.A.CARE Energy Research and Innovation Center King Abdulaziz UniversityJeddah 21589Saudi Arabia

Evolutionary computation is a rapidly evolving field and the related algorithms have been successfully used to solve various real-world optimization *** past decade has also witnessed their fast progress to solve a class of challenging optimization problems called high-dimensional expensive problems(HEPs).The evaluation of their objective fitness requires expensive resource due to their use of time-consuming physical experiments or computer ***,it is hard to traverse the huge search space within reasonable resource as problem dimension *** evolutionary algorithms(EAs)tend to fail to solve HEPs competently because they need to conduct many such expensive evaluations before achieving satisfactory *** reduce such evaluations,many novel surrogate-assisted algorithms emerge to cope with HEPs in recent *** there lacks a thorough review of the state of the art in this specific and important *** paper provides a comprehensive survey of these evolutionary algorithms for *** start with a brief introduction to the research status and the basic concepts of ***,we present surrogate-assisted evolutionary algorithms for HEPs from four main *** also give comparative results of some representative algorithms and application ***,we indicate open challenges and several promising directions to advance the progress in evolutionary optimization algorithms for HEPs.

关键词： computer optimization evolutionary

来源：评论

学校读者我要写书评

暂无评论

Functional plastic films:nano-engineered composite based flexible microwave antennas with near-unity relative visible transmittance

引用

Light(Advanced Manufacturing) 2024年第2期5卷 95-105页

作者： Cheng Zhang Liang Zhu Chengang Ji Zhilu Ye Nabeel Alsaab Minye Yang Yuhui Hu Pai-Yen Chen L.Jay Guo School of Optical and Electronic Information&Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan430074China Department of Electrical and Computer Engineering University of Illinois at ChicagoChicagoIL 60607USA Department of Electrical Engineering and Computer Science University of MichiganAnn ArborMI 48109USA

Microwave antennas are essential elements for various applications,such as telecommunication,radar,sensing,and wireless power *** antennas are conventionally manufactured on rigid substrates using opaque materials,such as metal strips,metallic tapes,or epoxy pastes;thus,prohibiting their use in flexible and wearable devices,and simultaneously limiting their integration into existing optoelectronic ***,we demonstrate that mechanically flexible and optically transparent microwave antennas with high operational efficiencies can be readily fabricated using composite nanolayers deposited on common plastic *** composite nanolayer structure consists of an ultra-thin copper-doped silver film sandwiched between two dielectric films of tantalum pentoxide and aluminum *** material and thickness of each constituent layer are judiciously selected such that the whole structure exhibits an experimentally measured averaged visible transmittance as high as 98.94%compared to a bare plastic substrate,and simultaneously,a sheet resistance as low as 12.5Ω/*** representative types of microwave antennas are implemented:an omnidirectional dipole antenna,unidirectional Yagi-Uda antenna,low-profile patch antenna,and Fabry-Pérot cavity *** devices exhibit great mechanical flexibility with bending angle over 70°,high gain of up to 13.6 dBi,and large radiation efficiency of up to 84.5%.The proposed nano-engineered composites can be easily prepared over large areas on various types of substrates and simultaneously overcome the limitations of poor mechanical flexibility,low electrical conductivity,and reduced optical transparency usually faced by other constituent materials for flexible transparent microwave *** demonstrated flexible microwave antennas have various applications ranging from fifth-generation and vehicular communication systems to bio-signal monitors and wearable electronics.

关键词： optically transparent antenna Flexible microwave antenna Transparent conductor Ultra-thin silver Doped silver Wearable optoelectronics

来源：评论

学校读者我要写书评

暂无评论

Design of a large-range rotary microgripper with freeform geometries using a genetic algorithm

引用

Microsystems & Nanoengineering 2022年第1期8卷 59-72页

作者： Chen Wang Yuan Wang Weidong Fang Xiaoxiao Song Aojie Quan Michiel Gidts Hemin Zhang Huafeng Liu Jian Bai Sina Sadeghpour Michael Kraft College of Optical Science and Engineering Zhejiang UniversityHangzhouChina Department of Electrical Engineering and Computer Science University of LiegeLiegeBelgium ESAT-MNS University of LeuvenLeuvenBelgium PGMF and School of Physics Huazhong University of Science and TechnologyWuhanChina

This paper describes a novel electrostatically actuated microgripper with freeform geometries designed by a genetic *** new semiautomated design methodology is capable of designing near-optimal MEMS devices that are robust to fabrication *** use of freeform geometries designed by a genetic algorithm significantly improves the performance of the *** experiment shows that the designed microgripper has a large displacement(91.5μm)with a low actuation voltage(47.5 V),which agrees well with the *** microgripper has a large actuation displacement and can handle micro-objects with a size from 10 to 100μm.A grasping experiment on human hair with a diameter of 77μm was performed to prove the functionality of the *** result confirmed the superior performance of the new design methodology enabling freeform *** design method can also be extended to the design of many other MEMS devices.

关键词： handle algorithm. algorithm

来源：评论

学校读者我要写书评

暂无评论

AI-Based Automatic System for Assessing Upper-Limb Spasticity of Patients With Stroke Through Voluntary Movement

引用

IEEE Journal of Biomedical and Health Informatics 2024年第2期28卷 742-752页

作者： Lee, I-Jung Hu, Yu Hen Hsiao, Pei-Chi Yang, Shu-Yu Lin, Hsin-Te Chen, Yu-Chung Lin, Bor-Shing National Taipei University College of Electrical Engineering and Computer Science New Taipei City237303 Taiwan University of Wisconsin-Madison Department of Electrical and Computer Engineering MadisonWI53706 United States Chi-Mei Medical Center Department of Physical Medicine and Rehabilitation Tainan71004 Taiwan Chi Mei Hospital Department of Physical Medicine and Rehabilitation Tainan73657 Taiwan National Taipei University Department of Computer Science and Information Engineering New Taipei City237303 Taiwan

Spasticity is a common complication for patients with stroke, but only few studies investigate the relation between spasticity and voluntary movement. This study proposed a novel automatic system for assessing the severity of spasticity (SS) of four upper-limb joints, including the elbow, wrist, thumb, and fingers, through voluntary movements. A wearable system which combined 19 inertial measurement units and a pressure ball was proposed to collect the kinematic and force information when the participants perform four tasks, namely cone stacking (CS), fast flexion and extension (FFE), slow ball squeezing (SBS), and fast ball squeezing (FBS). Several time and frequency domain features were extracted from the collected data, and two feature selection approaches based on recursive feature elimination were adopted to select the most influential features. The selected features were input into five machine learning techniques for assessing the SS for each joint. The results indicated that using CS task to assess the SS of elbow and fingers and using FBS task to assess the SS of thumb and wrist can reach the highest weighted-average F1-score. Furthermore, the study also concluded that FBS is the optimal task for assessing all the four upper-limb joints. The overall result shown that the proposed automatic system can assess four upper-limb joints through voluntary movements accurately, which is a breakthrough of finding the relation between spasticity and voluntary movement. © 2013 IEEE.

关键词： Learning systems

来源：评论

学校读者我要写书评

暂无评论

Dzyaloshinskii-Moriya-type spin-spin interaction from mixed-parity superconductivity

引用

Physical Review B 2025年第6期111卷 L060504-L060504页

作者： Jabir Ali Ouassou Takehito Yokoyama Jacob Linder Department of Computer Science Electrical Engineering and Mathematical Sciences Western Norway University of Applied Sciences NO-5528 Haugesund Norway Department of Physics Tokyo Institute of Technology Meguro Tokyo 152-8551 Japan Center for Quantum Spintronics Department of Physics Norwegian University of Science and Technology NO-7491 Trondheim Norway

Interacting impurity spins adsorbed on surfaces have been suggested as basic components for applications in quantum computation and spintronics. Such spins usually prefer a parallel or antiparallel configuration, but weakly noncollinear alignments are possible due to the Dzyaloshinskii-Moriya interaction (DMI) that arises in the presence of relativistic spin-orbit coupling. Here, we show that an effective Dzyaloshinskii-Moriya-type interaction (DMTI) can emerge purely from superconducting correlations without any spin-orbit interaction. We give an analytical proof and provide a numerical study which shows that DMTI arises in mixed-parity superconductors solely from the superconducting pairing. Moreover, we show that the same effect can be realized in Josephson junctions between s-wave and p-wave superconductors, where a phase bias toggles the DMTI entirely on and off. These results enable a way to engineer spin textures using superconducting order.

关键词： Shear waves

来源：评论

学校读者我要写书评

暂无评论

Tensor rank and other multipartite entanglement measures of graph states

引用

Physical Review A 2024年第3期110卷 032409页

作者： Louis Schatzki Linjian Ma Edgar Solomonik Eric Chitambar Department of Electrical and Computer Engineering Illinois Quantum Information Science and Technology Center Department of Computer Science

Graph states play an important role in quantum information theory through their connection to measurement-based computing and error correction. Prior work revealed elegant connections between the graph structure of these states and their multipartite entanglement. We continue this line of investigation by identifying additional entanglement properties for certain types of graph states. From the perspective of tensor theory, we tighten both upper and lower bounds on the tensor rank of odd ring states (|R2n+1〉) to read 2n+1≤rank(|R2n+1〉)≤3×2n−1. Next we show that several multipartite extensions of bipartite entanglement measures are dichotomous for graph states based on the connectivity of the corresponding graph. Finally, we give a simple graph rule for computing the n-tangle τn.

关键词： Entanglement measures

来源：评论

学校读者我要写书评

暂无评论

Robust graph‐based localization for industrial Internet of things in the presence of flipping ambiguities

引用

CAAI Transactions on Intelligence Technology 2023年第4期8卷 1140-1149页

作者： Mian Imtiaz ul Haq Ruhul Amin Khalil Muhannad Almutiry Ahmad Sawalmeh Tanveer Ahmad Nasir Saeed Faculty of Electrical Engineering Swedish College of Engineering and TechnologyWah CanttPakistan Department of Electrical Engineering Faculty of Electrical and Computer EngineeringUniversity of Engineering and TechnologyPeshawarPakistan Department of Electrical Engineering Remote Sensing UnitNorthern Border UniversityArarSaudi Arabia Data Science and Artificial Intelligence Department‐College of Science and Information Technology Irbid National UniversityIrbadJordan Innovation Education and Research Center for On‐Device AI Software(Bk21) Department of Computer Science and EngineeringChungnam National UniversityDaejeonRepublic of Korea Department of Electrical and Communication Engineering United Arab Emirates University(UAEU)Al AinUnited Arab Emirates

Localisation of machines in harsh Industrial Internet of Things(IIoT)environment is necessary for various ***,a novel localisation algorithm is proposed for noisy range measurements in IIoT *** position of an unknown machine device in the network is estimated using the relative distances between blind machines(BMs)and anchor machines(AMs).Moreover,a more practical and challenging scenario with the erroneous position of AM is considered,which brings additional uncertainty to the final position ***,the AMs selection algorithm for the localisation of BMs in the IIoT network is *** those AMs will participate in the localisation process,which increases the accuracy of the final location ***,the closed‐form expression of the proposed greedy successive anchorization process is derived,which prevents possible local convergence,reduces computation,and achieves Cramér‐Rao lower bound accuracy for white Gaussian measurement *** results are compared with the state‐of‐the‐art and verified through numerous simulations.

关键词： Cramér‐Rao lower bound greedy successive anchorization industrial internet of things localization

来源：评论

学校读者我要写书评

暂无评论

Improved Manta Ray Foraging Optimizer-based SVM for Feature Selection Problems:A Medical Case Study

引用

Journal of Bionic engineering 2024年第1期21卷 409-425页

作者： Adel Got Djaafar Zouache Abdelouahab Moussaoui Laith Abualigah Ahmed Alsayat Faculty of informatics University of Science and Technology Houari BoumedieneAlgiersAlgeria LRIA Laboratory University of Science and Technology Houari BoumedieneAlgiersAlgeria Computer Science Department University of Mohamed El Bachir El IbrahimiBordj Bou ArreridjAlgeria Computer Science Department University of Ferhat AbbasSetifAlgeria Computer Science Department Prince Hussein Bin Abdullah Faculty for Information TechnologyAl al-Bayt UniversityMafraq 25113Jordan Department of Computer Science College of Computer and Information SciencesJouf UniversityJoufSaudi Arabia Department of Electrical and Computer Engineering Lebanese American University13-5053ByblosLebanon Hourani Center for Applied Scientific Research Al-Ahliyya Amman UniversityAmman 19328Jordan MEU Research Unit Middle East UniversityAmman 11831Jordan Applied science research center Applied science private universityAmman 11931Jordan School of Computer Sciences Universiti Sains Malaysia11800 PenangMalaysia School of Engineering and Technology Sunway University Malaysia27500 Petaling JayaMalaysia

Support Vector Machine(SVM)has become one of the traditional machine learning algorithms the most used in prediction and classification ***,its behavior strongly depends on some parameters,making tuning these parameters a sensitive step to maintain a good *** the other hand,and as any other classifier,the performance of SVM is also affected by the input set of features used to build the learning model,which makes the selection of relevant features an important task not only to preserve a good classification accuracy but also to reduce the dimensionality of *** this paper,the MRFO+SVM algorithm is introduced by investigating the recent manta ray foraging optimizer to fine-tune the SVM parameters and identify the optimal feature subset *** proposed approach is validated and compared with four SVM-based algorithms over eight benchmarking ***,it is applied to a disease Covid-19 *** experimental results show the high ability of the proposed algorithm to find the appropriate SVM’s parameters,and its acceptable performance to deal with feature selection problem.

关键词： Support vector machine Parameters tuning Feature selection Bioinspired algorithms Manta ray foraging optimizer

来源：评论

学校读者我要写书评

暂无评论

Deep learning based three-dimensional computer holography from stereo/single images

Deep learning based three-dimensional computer holography fr...

引用

2024 Conference on Lasers and Electro-Optics/Pacific Rim, CLEO-PR 2024

作者： Chang, Chenliang Dai, Bo Zhuang, Songlin Zhang, Dawei School of Optical-Electrical and Computer Engineering Engineering Research Center of Optical Instrument and System Ministry of Education Shanghai Key Laboratory of Modern Optics System University of Shanghai for Science and Technology Shanghai200093 China

In the field of computer holography, generating three-dimensional (3D) computer-generated hologram (CGH) in real-time speed has been a significant challenge due to the huge amount of data in 3D object wave. Deep learning has been proposed to compute CGH very fast using convolutional neural network (CNN). However, the input of the such CNN still depends on the acquisition of 3D information like RGB-D image. Here we present novel deep learning based computer holography technique which can rapidly generate CGH using CNN directly from stereo/single images rather than from RGB-D data. The method can simplify the CGH generation by using images as input, therefore avoiding the cumbersome 3D depth measuring process. © 2024 The Author(s)

关键词： Stereocenters

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：