检索结果-内蒙古大学图书馆

Multi-function adsorbent-photocatalyst MXene-TiO_(2) composites for removal of enrofloxacin antibiotic from water

Journal of Environmental sciences 2023年第2期124卷 414-428页

作者： Siwanat Sukidpaneenid Chamorn Chawengkijwanich Chonlada Pokhum Toshihiro Isobe Pakorn Opaprakasit Paiboon Sreearunothai TAIST-Tokyo Tech Program Sirindhorn International Institute of TechnologyThammasat UniversityPathum Thani 12121Thailand National Nanotechnology Center National Science and Technology Development AgencyPathum Thani 12120Thailand Department of Materials Science and Engineering School of Materials and Chemical TechnologyTokyo Institute of TechnologyTokyo 152-8550Japan School of Bio-Chemical Engineering and Technology Sirindhorn International Institute of TechnologyThammasat UniversityPathum Thani 12121Thailand

MXenes,a new family of two-dimensional transition metal carbides or nitrides,have attracted tremendous attention for various applications due to their unique properties such as good electrical conductivity,hydrophilicity,and ion *** this work,Ti_(3)C_(2) MXene,or MX,is converted to MX-TiO_(2) composites using a simple and rapid microwave hydrothermal treatment in HCl/NaCl mixture solution that induces formation of fine TiO_(2) particles on the MX parent structure and imparts photocatalytic activity to the resulting MX-TiO_(2) *** composites were used for enrofloxacin(ENR),a frequently found contaminating antibiotic,removal from *** relative amount of the MX and TiO_(2) can be controlled by controlling the hydrothermal temperature resulting in composites with tunable adsorption/photocatalytic *** addition was found to play important role as composites synthesized without NaCl could not adsorb enrofloxacin *** NaCl into the hydrothermal treatment causes sodium ions to be simultaneously intercalated into the composite structure,improving ENR adsorption greatly from 1 to 6 mg ENR/g *** also slows down the MX to TiO2 conversion leading to a smaller and more uniform distribution of TiO_(2) particles on the ***-TiO_(2)/NaCl composites,which have sodium intercalated in their structures,showed both higher ENR adsorption and photocatalytic activity than composites without NaCl despite the latter having higher TiO2 *** ENR on the composites can be efficiently degraded by free radicals generated from the photoexcited TiO2 particles,leading to high photocatalytic degradation *** demonstrates the synergetic effect between adsorption and photocatalytic degradation of the synthesized compounds.

关键词： MXene-TiO_(2)composites Ti3C2 Ion-exchange Photocatalytic degradation Enrofloxacin Antibiotics removal

来源：评论

学校读者我要写书评

暂无评论

Oxygen-deficient SnO_(2)nanoparticles with ultrathin carbon shell for efficient electrocatalytic N_(2)reduction

引用

Green Energy & Environment 2022年第4期7卷 672-679页

作者： Guangkai Li Haeseong Jang Zijian Li Jia Wang Xuqiang Ji Min Gyu Kim Xien Liu Jaephil Cho State Key Laboratory Base of Eco-chemical Engineering College of Chemical EngineeringCollege of Chemistry and Molecular EngineeringQingdaoUniversity of Science and TechnologyQingdao266042China Department of Energy Engineering School of Energy and Chemical EngineeringUlsan National Institute of Science and Technology(UNIST)Ulsan689-798South Korea College of Materials Science and Engineering Qingdao UniversityQingdao266071China Beamline Research Division Pohang Accelerator Laboratory(PAL)Pohang790-784South Korea

For high-efficiency NH_(3)synthesis via ambient-condition electrohydrogenation of inert N_(2),it is pivotal to ingeniously design an active electrocatalyst with multiple features of abundant surfacial deficiency,good conductivity and large surface ***,oxygen-deficient SnO_(2)nanoparticles encapsulated by ultrathin carbon layer(d-SnO_(2)@C)are developed by hydrothermal deposition coupled with annealing process,as promising catalysts for ambient electrocatalytic N_(2)reduction.d-SnO_(2)@C exhibits high activity and excellent selectivity for electrocatalytic conversion of N_(2)to NH_(3)in acidic electrolytes,with Faradic efficiency as high as 12.7%at-0.15 V versus the reversible hydrogen electrode(RHE)and large NH_(3)yield rate of 16.68μg h^(-1)mgcat^(-1)at-0.25 V *** in 0.1 mol L^(-1)*** from the structural superiority of enhanced charge transfer efficiency and optimized surface states,d-SnO_(2)@C also achieves excellent long-term stability.

关键词： N_(2)reduction reaction NH_(3)synthesis SnO_(2) Electrocatalysts Ambient conditions

来源：评论

学校读者我要写书评

暂无评论

Catalyst breakthroughs in methane dry reforming: Employing machine learning for future advancements

引用

International Journal of Hydrogen Energy 2024年 141卷 406-443页

作者： Ameen, Somavia Farooq, Muhammad Umar Samia Umer, Sundus Abrar, Amna Hussnain, Seemab Saeed, Faiq Memon, Mazhar Ahmed Ajmal, Muhammad Umer, Muhammad Abdullah Hussain, Iftikhar Hanif, Muhammad Bilal Department of Chemistry School of Science Tianjin Key Laboratory of Molecular Optoelectronic Science Tianjin University Tianjin300072 China School of Chemistry and Chemical Engineering Shanghai Jiao Tong University Shanghai200240 China Tianjin Key Laboratory of Low Dimensional Materials Physics and Preparing Technology School of Science Tianjin University Tianjin300072 China School of Materials Science and Engineering Nanjing University of Science and Technology Nanjing210094 China Tianjin Key Laboratory of Applied Catalysis Science and Technology School of Chemical Engineering and Technology Tianjin University Tianjin300072 China Key Laboratory for Green Chemical Technology of the Ministry of Education Institute of Molecular Plus School of Chemical Engineering and Technology Tianjin University Tianjin300072 China Department of Energy Conversion and Storage Technical University of Denmark Kgs Lyngby Denmark Department of Mechanical Engineering City University of Hong Kong 83 Tat Chee Avenue Kowloon Hong Kong Department of Inorganic Chemistry Faculty of Natural Sciences Comenius University in Bratislava Ilkovicova 6 Bratislava842 15 Slovakia

Rising levels of atmospheric carbon dioxide (CO2) and methane (CH4) have sparked the interest of researchers in resolving this issue. Various technologies have been utilized such as dry reformation of methane (DRM), that turns these greenhouse gases (GHGs) into syngas. Numerous studies have been done in recent years to produce efficient and competitive catalysts for DRM. However, a "state of the art" review is still required due to a lack of literature on improvements and scalability of robust catalytic systems. This study aims to evaluate recent advancements in catalyst formulations, their activities, stability, and selectivity. We have discussed a variety of materials, including Metal-Organic Frameworks (MOF), a type of two-dimensional transition metal carbides and nitrides (MXene), reducible and irreducible metal oxides, transition metal oxides, zeolites, carbon, and biochar-based catalysts, which are responsible for improving the effectiveness of the DRM process. Furthermore, machine learning (ML) approaches are highlighted for their potential in catalyst design and optimization, providing increased accuracy and efficiency. This review highlights major enhancements to the DRM method, which result in higher hydrogen yield and catalyst stability. Novel catalysts have been created to tackle crucial problems including coking and sintering, which are necessary to progress commercialization. To ensure successful commercial application, future research should concentrate on finding catalysts with excellent features that are also economically viable. This study provides a significant resource for future catalyst development and promotes greater cooperation between academic and commercial communities. © 2024 Hydrogen Energy Publications LLC

关键词： Sintering

来源：评论

学校读者我要写书评

暂无评论

Design and development of an integrated enset processing machine suitable for central highland farmers of west shewa zone Ethiopia

引用

Discover Agriculture 2025年第1期3卷 1-26页

作者： Jima, Beka Adugna Kolhe, Kishor Purushottam Jiru, Moera Gutu Agricultural Machinery Engineering Program Department of Mechanical Engineering School of Mechanical Chemical and Materials Engineering at Adama Science and Technology University Adama Ethiopia Department of Mechanical Engineering School of Mechanical Chemical and Materials Engineering at Adama Science and Technology University Adama Ethiopia

The development of Integrated Enset processing technology is significant for the easy availability of stable food in the current condition for fulfilling the pangs of hunger in Ethiopia, currently; individual manual technologies such as decortication, corm granting, bulla extraction, and fermenting techniques eventually contribute to utilizing food security such as Kocho, which is not affordable for the marginal farmers of Ethiopia. However, there is a lack of integrated compromise of the all-function process of corm granting, decortication, and pulverization in one machine wholesome of the product such as Kocho, and bulla within consuming time and labor. Therefore, it is decided to design and develop an integrated enset processing machine for central high land of Ethiopian farmers with high-quality production. The physical and mechanical properties of the enset is studied to get an efficient and robust design of the various components. The overall design and development of proposed machine components were carried out at Adama science and Technology University, Ethiopia by using ANSYS 2023 R1 software by considering the engineering economics and material specifications as per ASTM standards. The process parameters of the proposed machine are identified as feed rate, drum speed, concave to drum clearance, power requirement, etc. Also, the enset characteristics were considered as decorticating and granting, fiber cutting resistance, fiber length, dimension, shape, and weight. The overall developed enset integrated machine assembles are analyzed for granting and decorticating with drum clearance and bulla extraction throughput capacity, reliability, simplicity, safety, and overall cost. The machine's safety from a Design Perspective is checked and validated by a simulation study on the critical parts subjected to higher stresses. The cost of available individual decorticators, granting, pulverized, and bulla squeezer machines is costly to the farmer’s community. Theref

关键词：

来源：评论

学校读者我要写书评

暂无评论

Semitransparent organic photovoltaics enabled by transparent p-type inorganic semiconductor and near-infrared acceptor

引用

Journal of Energy Chemistry 2024年第9期96卷 351-358页

作者： Xue Yan Jiayu Wang Wei He Top Archie Dela Peña Can Zhu Hailin Yu Yingyue Hu Cenqi Yan Shengqiang Ren Xingyu Chen Zhe Wang Jiaying Wu Mingjie Li Jianlong Xia Lei Meng Shirong Lu Dewei Zhao Mikhail Artemyev Yongfang Li Pei Cheng College of Polymer Science and Engineering State Key Laboratory of Polymer Materials EngineeringSichuan UniversityChengdu 610065SichuanChina Department of Applied Physics The Hong Kong Polytechnic UniversityKowloonHong Kong 999077China Beijing National Laboratory for Molecular Sciences CAS Key Laboratory of Organic SolidsInstitute of ChemistryChinese Academy of SciencesBeijing 100190China College of Materials Science and Engineering&Engineering Research Center of Alternative Energy Materials&Devices Ministry of EducationSichuan UniversityChengdu 610065SichuanChina Department of Material Science and Technology Taizhou UniversityTaizhou 318000ZhejiangChina Advanced Materials Thrust Function HubThe Hong Kong University of Science and Technology(Guangzhou)Guangzhou 511400GuangdongChina State Key Laboratory of Advanced Technology for Materials Science and Processing Center of Smart Materials and DevicesWuhan University of TechnologyWuhan 430070HubeiChina Department of Civil1nd Environmental Engineering The Hong Kong University of Science and TechnologyHong Kong 999077China Research Institute for Physical Chemical Problems Belarusian State UniversityMinsk 220006Belarus

Semitransparent organic photovoltaics(STOPVs)have gained wide attention owing to their promising applications in building-integrated photovoltaics,agrivoltaics,and floating *** semiconductors with high charge carrier mobility usually have planar and conjugated structures,thereby showing strong absorption in visible *** this work,a new concept of incorporating transparent inorganic semiconductors is proposed for high-performance ***(I)thiocyanate(CuSCN)is a visible-transparent inorganic semiconductor with an ionization potential of 5.45 eV and high hole *** transparency of CuSCN benefits high average visible transmittance(AVT)of *** energy levels of CuSCN as donor match those of near-infrared small molecule acceptor BTP-eC9,and the formed heterojunction exhibits an ability of exciton *** mobility of CuSCN contributes to a more favorable charge transport channel and suppresses charge *** control STOPVs based on PM6/BTP-eC9 exhibit an AVT of 19.0%with a power conversion efficiency(PCE)of 12.7%.Partial replacement of PM6 with CuSCN leads to a 63%increase in transmittance,resulting in a higher AVT of 30.9%and a comparable PCE of 10.8%.

关键词： Copper(I)thiocyanate Inorganic semiconductor Semitransparent Organic photovoltaics Charge dissociation

来源：评论

学校读者我要写书评

暂无评论

3D flower-like mesoporous Bi_(4)O_(5)I_(2)/MoS_(2)Z-scheme heterojunction with optimized photothermal-photocatalytic performance

引用

Green Energy & Environment 2023年第1期8卷 200-212页

作者： Sijia Song Zipeng Xing Ke Wang Huanan Zhao Peng Chen Zhenzi Li Wei Zhou Department of Environmental Science School of Chemistry and Materials ScienceKey Laboratory of Functional Inorganic Material ChemistryMinistry of Education of the People's Republic of ChinaHeilongjiang UniversityHarbin150080China Shandong Provincial Key Laboratory of Molecular Engineering School of Chemistry and Chemical EngineeringQilu University of Technology(Shandong Academy of Sciences)JinanShandong250353China

3D flower-like hierarchical mesoporous Bi_(4)O_(5)I_(2)/MoS_(2)Z-scheme layered heterojunction photocatalyst was fabricated by oil bath and hydrothermal *** heterojunction with narrow band gap of~1.95 eV extended the photoresponse to near-infrared region,which showed obvious photothermal effect due to the introduction of MoS_(2) with broad spectrum ***_(2) nanosheets were anchored onto the surface of flower-like hierarchical mesoporous Bi_(4)O_(5)I_(2) nanosheets,thereby forming efficient layered heterojunctions,the solar-driven photocatalytic efficiency in degradation of highly toxic dichlorophenol and reduction of hexavalent chromium was improved to 98.5%and 99.2%,which was~4 and 7 times higher than that of the pristine Bi_(4)O_(5)I_(2),*** addition,the photocatalytic hydrogen production rate reached 496.78 μmol h^(-1)g^(-1),which was~6 times higher than that of the pristine Bi_(4)O_(5)I_(2).The excellent photocatalytic performance can be ascribed to the promoted photothermal effect,as well as,the formation of compact Z-scheme layered *** 3D flower-like hierarchical mesoporous structure provided adequate surface active-sites,which was conducive to the mass ***,the high stability of the prepared photocatalyst further promoted its potential practical *** strategy also provides new insights for fabricating layered Zscheme heterojunctions photocatalysts with highly photothermal-photocatalytic efficiency.

关键词： Photocatalysis Z-scheme heterojunction Bi4O5I2 MoS2 Photothermal effect

来源：评论

学校读者我要写书评

暂无评论

Environmentally-friendly alkaline ionized water pretreatment and hydrolysis of macroalga via microwave-assisted heating to improve monosaccharide yield for bioethanol production

引用

Process Safety and Environmental Protection 2024年 189卷 702-713页

作者： Chen, Wei-Hsin Liu, Li-Xuan Khoo, Kuan Shiong Sheen, Herng-Kuang Kwon, Eilhann E. Saravanakumar, Ayyadurai Chang, Jo-Shu Department of Aeronautics and Astronautics National Cheng Kung University Tainan701 Taiwan Research Center for Smart Sustainable Circular Economy Tunghai University Taichung407 Taiwan Department of Mechanical Engineering National Chin-Yi University of Technology Taichung411 Taiwan International Master Degree Program on Energy National Cheng Kung University Tainan701 Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University Taoyuan Taiwan Sugar Business Division Taiwan Sugar Corporation Taiwan701 Taiwan Department of Earth Resources and Environmental Engineering Hanyang University Seoul04763 Korea Republic of Directorate of Research SRM Institute of Science and Technology Chengalpattu District Tamil Nadu Kattankulathur603203 India Department of Chemical Engineering and Materials Science College of Engineering Tunghai University Taichung Taiwan Department of Chemical Engineering National Cheng Kung University Tainan Taiwan

This study synthesizes three sequential steps: pretreatment, acid hydrolysis, and enzyme hydrolysis for bioethanol and hydrochar production from macroalga Gracilaria. The Taguchi method is employed separately in each step to optimize relevant operating factors, aiming to maximize the monosaccharide yield. During pretreatment, environmentally friendly alkaline ionized water is utilized as it does not contain chemical additives. Afterward, microwave-assisted hydrolysis is adopted to enhance the monosaccharide yield of the macroalga for bioenergy production. The results show that the total sugar of Gracilaria undergoing acid hydrolysis alone is 28.72 g‧L−1. The total sugar content after alkaline pretreatment followed by acid hydrolysis is 32.64 g‧L−1, and it increases to 34.76 g‧L−1 after adding enzymes. Meanwhile, the higher heating value of Gracilaria increases from 10.884 MJ‧kg−1 to 12.620 MJ‧kg−1 after undergoing alkaline pretreatment. After the acid and enzyme hydrolysis processes, it increases to 15.164 MJ‧kg−1. The solid biofuel's calorific value increases by 39 % from the three-stage processes. The liquid product combined with Saccharomyces cerevisiae can produce bioethanol, while the produced hydrochar can be used as a solid fuel. This research promotes the development of macroalgal biomass for energy and environmental applications, thereby advancing the circular bioeconomy. © 2024 The Institution of chemical Engineers

关键词： Ethanol

来源：评论

学校读者我要写书评

暂无评论

AI for organic and polymer synthesis

引用

science China Chemistry 2024年第8期67卷 2461-2496页

作者： Xin Hong Qi Yang Kuangbiao Liao Jianfeng Pei Mao Chen Fanyang Mo Hua Lu Wen-Bin Zhang Haisen Zhou Jiaxiao Chen Lebin Su Shuo-Qing Zhang Siyuan Liu Xu Huang Yi-Zhou Sun Yuxiang Wang Zexi Zhang Zhunzhun Yu Sanzhong Luo Xue-Feng Fu Shu-Li You Center of Chemistry for Frontier Technologies Department of ChemistryZhejiang UniversityHangzhou 310027China Center of Basic Molecular Science Department of ChemistryTsinghua UniversityBeijing 100084China Guangzhou National Laboratory Guangzhou 510005China Center for Quantitative Biology Academy for Advanced Interdisciplinary StudiesPeking UniversityBeijing 100871China State Key Laboratory of Molecular Engineering of Polymers Department of Macromolecular ScienceFudan UniversityShanghai 200433China School of Materials Science and Engineering Peking UniversityBeijing 100871China Beijing National Laboratory for Molecular Sciences Center for Soft Matter Science and EngineeringKey Laboratory of Polymer Chemistry and Physics of Ministry of EducationCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China AI for Science(AI4S)-Preferred Program Shenzhen Graduate SchoolPeking UniversityShenzhen 518055China State Key Laboratory of Chemical Biology Shanghai Institute of Organic ChemistryUniversity of Chinese Academy of SciencesChinese Academy of SciencesShanghai 200032China Department of Chemical Sciences National Natural Science Foundation of ChinaBeijing 100085China State Key Laboratory of Organometallic Chemistry Shanghai Institute of Organic ChemistryChinese Academy of SciencesShanghai 200032China

Recent years have witnessed the transformative impact from the integration of artificial intelligence with organic and polymer synthesis. This synergy offers innovative and intelligent solutions to a range of classic problems in synthetic chemistry. These exciting advancements include the prediction of molecular property, multi-step retrosynthetic pathway planning, elucidation of the structure-performance relationship of single-step transformation, establishment of the quantitative linkage between polymer structures and their functions, design and optimization of polymerization process, prediction of the structure and sequence of biological macromolecules, as well as automated and intelligent synthesis platforms. Chemists can now explore synthetic chemistry with unprecedented precision and efficiency, creating novel reactions, catalysts, and polymer materials under the datadriven paradigm. Despite these thrilling developments, the field of artificial intelligence(AI) synthetic chemistry is still in its infancy, facing challenges and limitations in terms of data openness, model interpretability, as well as software and hardware support. This review aims to provide an overview of the current progress, key challenges, and future development suggestions in the interdisciplinary field between AI and synthetic chemistry. It is hoped that this overview will offer readers a comprehensive understanding of this emerging field, inspiring and promoting further scientific research and development.

关键词： organic synthesis polymer synthesis machine learning prediction chemical database automated synthesis

来源：评论

学校读者我要写书评

暂无评论

Sonication labile PEG-based hydrogel system for biological component suspension and subsequent degradation

RSC Applied Polymers

引用

RSC Applied Polymers 2024年第6期2卷 1147-1156页

作者： Arguien, Meagan N. Kamps, Joshua T. Muth, Sarah A. Trujillo-Lemon, Marianela Bowman, Christopher N. Materials Science & Engineering Program University of Colorado Boulder 80309 CO United States Department of Chemistry University of Colorado Boulder 80309 CO United States Department of Molecular Cellular & Developmental Biology University of Colorado Boulder 80309 CO United States Department of Chemical and Biological Engineering University of Colorado Boulder 80309 CO United States

This work synthesizes poly(ethylene glycol) (PEG) macromers that incorporate a phthalaldehyde moiety located at crosslink junctions. This location facilitates the severing of the polymer network when bond scission of the phthalaldehyde unit occurs with mechanical stimulation. As these networks degrade, the mechanical properties are analyzed to better understand how sonication driven degradation affects a polymer network - specifically looking at the degradation profile in hydrogel systems through the mass loss and storage modulus profiles. Comparison of hydrogels containing phthalaldehyde units with hydrogels that do not have the mechanophore pre- and post-mechanical stimulation provides evidence that the incorporation of the mechanophore at these crosslink junctions reduces the storage modulus by a factor of ten and results in greater than 90% decrease of the gel mass after 15 minutes of probe sonication, leading to breaking the network into soluble daughter fragments. The network degradation conditions of these hydrogels are shown to be compatible with biological component suspension and release for applications such as localized payload release. © 2024 RSC.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Downsizing and soft X-ray tomography for cellular uptake of interpenetrated metal-organic frameworks

引用

Journal of materials Chemistry B 2024年第25期12卷 6079-6090页

作者： Yu, Yu-Sheng Liang, Yung-Yi Hsieh, Chia-Chun Lin, Zi-Jing Cheng, Po-Hsiu Cheng, Chih-Chan Chen, Shu-Ping Lai, Lee-Jene Wu, Kevin C.-W. National Taiwan University Department of Chemical Engineering Taipei Taiwan National Health Research Institute Institute of Biomedical Engineering and Nanomedicine Miaoli Taiwan Hsinchu Taiwan International Graduate Program of Molecular Science and Technology Taiwan International Graduate Program Academia Sinica Taipei Taiwan National Taiwan University Taipei Taiwan

Metal-organic frameworks (MOFs) are porous materials with potential in biomedical applications such as sensing, drug delivery, and radiosensitization. However, how to tune the properties of the MOFs for such applications remains challenging. Herein, we synthesized two MOFs, Zr-PEB and Hf-PEB. Zr-PEB can be classified as porous interpenetrated zirconium frameworks (PIZOFs) and Hf-PEB is its analogue. We controlled their sizes while maintaining their crystal structure by employing a coordination modulation strategy. They were designed to serve as sensitizer for X-ray therapy and as potential drug carriers. Comprehensive characterizations of the MOFs' properties have been conducted, and the in vitro biological impacts have been studied. Since viability assay showed that Hf-PEB was more biocompatible compared to Zr-PEB, the cellular uptake of Hf-PEB by cells was evaluated using both fluorescence microscopy and soft X-ray tomography (SXT), and the three-dimensional structure of Hf-PEB in cells was observed. The results revealed the potential of Zr-PEB and Hf-PEB as nanomaterials for biomedical applications and demonstrated that SXT is an effective tool to assist the development of such materials. © 2024 The Royal Society of Chemistry.

关键词： Organometallics

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：