检索结果-内蒙古大学图书馆

arXiv 2023年

作者： Rogers, Ariel Niyonshuti, Isabelle I. Ou, Jun Shrestha, Diksha Chen, Jingyi Wang, Yong Department of Physics University of Arkansas FayettevilleAR72701 United States Department of Chemistry and Biochemistry University of Arkansas FayettevilleAR72701 United States School of Engineering California State Polytechnic University Humboldt ArcataCA95521 United States Mechanical Engineering Program California State Polytechnic University Humboldt ArcataCA95521 United States Cell and Molecular Graduate Program University of Arkansas FayettevilleAR72701 United States Materials Science and Engineering Program University of Arkansas FayettevilleAR72701 United States

Light-based nanowelding of metallic nanoparticles is of particular interest because it provides convenient and controlled means for the conversion of nanoparticles into microstructures and fabrication of nanodevices. Here, we demonstrated the wavelength dependence of laser-induced nanowelded shapes of silver nanoparticles (AgNPs). We observed that the nanowelded microstructures illuminated by the 405 nm laser only were more branched than those formed with illumination of both the 405 nm and 532 nm lasers. We quantified this observation by several compactness descriptors and examined the dependence of the power of the 532 nm laser. More importantly, to understand the experimental observations, we formulated and tested a hypothesis by calculating the wavelength-dependent electric field enhancement due to surface plasmon resonance of the AgNPs and nanowelded microstructures when illuminated with lights at the two wavelengths. Based on the different patterns of "hot spots" for welding AgNPs from these calculations, numerical simulations successfully "reproduced" the different shapes of nanowelded microstructures, supporting our hypothesis. This work suggests the possibility of light-based controlling the shapes of laser-induced nanowelded microstructures of metallic nanoparticles. This work is expected to facilitate the development of better nanowelding strategies of metallic nanoparticles for broader applications. Copyright © 2023, The Authors. All rights reserved.

关键词： Surface plasmon resonance

来源：评论

学校读者我要写书评

暂无评论

molecular Insights into the Structure-Property Relationships of 3d Printed Polyamide Reverse-Osmosis Membrane for Desalination

SSRN

引用

SSRN 2022年

作者： He, Jinlong Yang, Jason McCutcheon, Jeffrey R. Li, Ying Department of Mechanical Engineering University of Connecticut StorrsCT06269 United States Division of Chemistry and Chemical Engineering California Institute of Technology PasadenaCA91125 United States Department of Chemical & Biomolecular Engineering Center for Environmental Sciences and Engineering University of Connecticut StorrsCT06269 United States Department of Mechanical Engineering Polymer Program Institute of Materials Science University of Connecticut StorrsCT06269 United States

3D-printing is an emerging method for manufacturing polyamide (PA) reserve osmosis (RO) membranes for water treatment and desalination, which can precisely control membrane structural properties, such as thickness, roughness, and resolution. However, the synthesis-structure (i.e., degree of cross-linking (DC), m-phenylenediamine/trimesoyl chloride (MPD/TMC) ratio, and membrane thickness) to property (permeability and water-salt selectivity) relationships for these membranes has not been well understood. At the same time, a microscopic understanding of the physical mechanism of water and salt transport is needed to guide the design of high-performance 3D-printed membranes and improve printing efficiency. Thus, the atomic-scale transport features and energetics of water and salt ions are studied at high pressure for the 3D-printed PA RO membranes with the different DCs and MPD/TMC ratios through non-equilibrium molecular dynamics (NEMD) simulations. Factoring in membrane structure properties, rejection ratio of salt ions and pressure-dependent water flux, 3D-printed PA membranes having an MPD/TMC ratio of 3.0:2.0 and a DC between 80%~90% attains ideal performance: high water flux, high rejection of salt ions, and excellent structural integrity. Mechanistically, water permeability for highly cross-linked PA RO membranes depends on the temporary on-and-off channels that allow water molecules to jump from one cavity to another at high pressure. In addition, higher pressures cause a rapid compaction of PA membranes’ free volume and membrane thickness. Membrane failure at high pressure is determined by the DC and MPD/TMC ratios-dependent compressive yield strength. In short, these findings provide physical insights for optimizing existing PA membranes and designing next-generation desalination membranes at the molecular level. © 2022, The Authors. All rights reserved.

关键词： molecular dynamics

来源：评论

学校读者我要写书评

暂无评论

Naked-eye observation of water-forming reaction on palladium etalon:transduction of gas-matter reaction into light-matter interaction

引用

PhotoniX 2023年第1期4卷 349-363页

作者： Jongsu Lee Eui-Sang Yu Taehyun Kim In Soo Kim Seok Chung Seung Jae Kwak Won Bo Lee Yusin Pak Yong-Sang Ryu Sensor System Research Center Korea Institute of Science and TechnologySeoul 02792Republic of Korea Department of Electrical and Computer Engineering Seoul National UniversitySeoul 08826Republic of Korea Smart Materials Research Section Electronics and Telecommunications Research InstituteDaejeon 34129Republic of Korea Department of Micro/Nano Systems Korea University02841 SeoulRepublic of Korea Nanophotonics Research Center Korea Institute of Science and TechnologySeoul 02792Republic of Korea School of Mechanical Engineering Korea UniversitySeoul 02841Republic of Korea School of Chemical and Biological Engineering Seoul National UniversitySeoul 08826Republic of Korea Interdisciplinary Program in Precision Public Health Korea UniversitySeoul 02481Republic of Korea School of Biomedical Engineering Korea UniversitySeoul 02481Republic of Korea

Palladium is the most prominent material in both scientific and industrial research on gas storage,purification,detection,and catalysis due to its unique properties as a catalyst and hydrogen *** the dynamic optical phenomena of palladium reacting with hydrogen,transduction of the gas-matter reaction into light-matter interaction is attempted to visualize the dynamic surface chemistry and reaction *** simple geometry of the metal-dielectric-metal structure,Fabry-Perot etalon,is employed for a colorimetric reactor,to display the catalytic reaction of the exposed gas via water-film/bubble formation at the dielectric/palladium *** adsorption/desorption behavior and catalytic reaction of hydrogen and oxygen on the palladium surface display highly repeatable and dramatic color changes based on two distinct water formation trends:the foggy effect by water bubbles and the whiteout effect by water film *** and experiments demonstrate the robustness of the proposed Fabry-Perot etalon as an excellent platform for monitoring the opto-physical phenomena driven by heterogeneous catalysis.

关键词： Palladium Hydrogen Oxygen Fabry-Perot resonators Colorimetric sensors Water-forming reaction

来源：评论

学校读者我要写书评

暂无评论

Changes in fluoride removal ability of chicken bone char with changes in calcination time

International Journal of Ceramic Engineering and Science

引用

International Journal of Ceramic engineering and science 2020年第2期2卷 83-91页

作者： Kikuchi, Masanori Arioka, Yuki Tafu, Masamoto Irie, Mitsuteru Bioceramics Group National Institute for Materials Science Tsukuba Japan Master's Program in Life Science Innovation University of Tsukuba Tsukuba Japan Department of Applied Chemistry and Chemical Engineering Toyama College National Institute of Technology Toyama Japan Faculty of Engineering University of Miyazaki Miyazaki Japan

Changes in fluoride removal ability of chicken bone char (CBC) were investigated by both remained amounts of carbon including organic substances and crystallite size of hydroxyapatite in the CBC. Carbon contents in CBC were controlled by heating time at 600°C. Although temperature for crystal-grain growth for HAp, 650°C, was higher than 600°C, crystallite size of HAp in CBC increased with heating time. Fluoride ion removal ability positively related to the amount of remaining carbon and negatively related to the square of crystallite size, as an index of surface area, of HAp. These results suggested that fluoride ion removal from water by CBC is not only by ion exchange and/or dissolution-precipitation process, but also by adsorption by carbon and/or temporal capture of fluoride ion by microstructure of carbonate in CBC before immobilize it in apatite structure. © 2019 The Authors. International Journal of Ceramic engineering & science published by Wiley Periodicals, Inc. on behalf of American Ceramic Society.

关键词： Crystallite size

来源：评论

学校读者我要写书评

暂无评论

CsPbBr_(3)quantum dots/PDVT-10 conjugated polymer hybrid film-based photonic synaptic transistors toward high-efficiency neuromorphic computing

引用

science China materials 2022年第11期65卷 3077-3086页

作者： Congyong Wang Qisheng Sun Gang Peng Yujie Yan Xipeng Yu Enlong Li Rengjian Yu Changsong Gao Xiaotao Zhang Shuming Duan Huipeng Chen Jishan Wu Wenping Hu Joint School of National University of Singapore and Tianjin University International Campus of Tianjin UniversityBinhai New CityFuzhou 350207China Department of Chemistry National University of Singapore3 Science Drive 3Singapore 117543Singapore Tianjin Key Laboratory of Molecular Optoelectronic Sciences Department of ChemistrySchool of ScienceTianjin University&Collaborative Innovation Center of Chemical Science and Engineering(Tianjin)Tianjin 300072China Institute of Optoelectronic Display National&Local United Engineering Lab of Flat Panel Display TechnologyFuzhou UniversityFuzhou 350002China Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China Fuzhou 350100China School of Materials Science and Engineering Xiamen University of TechnologyXiamen 361024China

Photonic synaptic transistors are promising neuromorphic computing systems that are expected to circumvent the intrinsic limitations of von Neumann-based *** design and construction of photonic synaptic transistors with a facile fabrication process and highefficiency information processing ability are highly desired,while it remains a tremendous ***,a new approach based on spin coating of a blend of CsPbBr_(3) perovskite quantum dot(QD)and PDVT-10 conjugated polymer is reported for the fabrication of photonic synaptic *** combination of flat surface,outstanding optical absorption,and remarkable charge transporting performance contributes to high-efficiency photon-to-electron conversion for such perovskite-based ***-performance photonic synaptic transistors are thus fabricated with essential synaptic functionalities,including excitatory postsynaptic current(EPSC),paired-pulse facilitation(PPF),and long-term *** utilizing the photonic potentiation and electrical depression features,perovskite-based photonic synaptic transistors are also explored for neuromorphic computing simulations,showing high pattern recognition accuracy of up to 89.98%,which is one of the best values reported so far for synaptic transistors used in pattern *** work provides an effective and convenient pathway for fabricating perovskite-based neuromorphic systems with high pattern recognition accuracy.

关键词： CsPbBr_(3)quantum dots photonic synaptic transistor synaptic functionalities neuromorphic computing pattern recognition accuracy

来源：评论

学校读者我要写书评

暂无评论

Elastocaloric effect in amorphous polymer networks undergoing mechanotropic phase transitions

arXiv

引用

arXiv 2021年

作者： Koch, Jeremy A. Herman, Jeremy A. White, Timothy J. University of Colorado Boulder Department of Chemical and Biological Engineering United States University of Colorado Boulder Materials Science and Engineering Program United States

Deformations of amorphous polymer networks prepared with significant concentrations of liquid crystalline mesogens have been recently reported to undergo mechanotropic phase transitions. Here, we report that these mechanotropic phase transitions are accompanied by an elastocaloric response (∆T = 2.9 K). Applied uniaxial strain to the elastomeric polymer network transitions the organization of the material from a disordered, amorphous state (order parameter Q = 0) to the nematic phase (Q = 0.47). Both the magnitude of the elastocaloric temperature change and mechanically induced order parameter are dependent on the concentration of liquid crystal mesogens in the material. While the observed temperature changes in these materials are smaller than those observed in shape memory alloys, the responsivity, defined as the temperature change divided by the input stress, is larger by an order of magnitude. © 2021, CC BY-NC-SA.

关键词： Liquid crystals

来源：评论

学校读者我要写书评

暂无评论

Effect of Different Manufacturing Methods on Polyamide Reverse-Osmosis Membranes for Desalination: Insights from molecular Dynamics Simulations

SSRN

引用

SSRN 2022年

作者： He, Jinlong McCutcheon, Jeffrey R. Li, Ying Department of Mechanical Engineering University of Connecticut StorrsCT06269 United States Department of Chemical & Biomolecular Engineering Center for Environmental Sciences and Engineering University of Connecticut StorrsCT06269 United States Polymer Program Institute of Materials Science University of Connecticut StorrsCT06269 United States

The industry-leading polyamide (PA) reverse osmosis (RO) membranes can be manufactured via molecular layer-by-layer (mLBL) deposition, interfacial polymerization (IP), and 3D-printing technique. However, the influence of different manufacturing methods on PA membrane’s properties is far from understood. In this study, we present the high-pressure transport behavior of water and salt ions for PA membranes formed with IP, mLBL, and 3D-printing through non-equilibrium molecular dynamics simulations. Studies show that membranes fabricated with 3D-printing have similar performances to those manufactured using mLBL, quantified by water permeability, rejection of salt ions, structural integrity, and porosity features. However, the membranes formed with IP exhibit faster water transport, lower rejection, worse structural integrity, and more inhomogeneous network pores than those constructed using mLBL and 3D-printing. The unconnected water-accessible space governs water transport for PA membranes formed with mLBL and 3D-printing, which offers the impermanent open-closed pores that enable water to jump through PA membranes. In contrast, the permeated water-enterable space plays a prominent role in water movement across the PA membrane formed with IP, providing a continuous transport channel at high pressure. Importantly, we observe the more significant compaction features at high pressure for PA membranes formed with IP than mLBL and 3D-printing. © 2022, The Authors. All rights reserved.

关键词： Polymerization

来源：评论

学校读者我要写书评

暂无评论

Giant Deep-Ultraviolet Circular Dichroism in Synthetic Architectures of Ordered Carbon Nanotubes

Giant Deep-Ultraviolet Circular Dichroism in Synthetic Archi...

引用

2023 Conference on Lasers and Electro-Optics, CLEO 2023

作者： Doumani, Jacques Lou, Minhan Dewey, Oliver Hong, Nina Fan, Jichao Baydin, Andrey Pasquali, Matteo Yomogida, Yohei Yanagi, Kazuhiro Saito, Riichiro Kono, Junichiro Gao, Weilu Department of Electrical and Computer Engineering Rice University HoustonTX United States Applied Physics Graduate Program Smalley-Curl Institute Rice University HoustonTX United States Department of Electrical and Computer Engineering The University of Utah Salt Lake CityUT United States Carbon Hub Rice University HoustonTX United States Department of Chemical and Biomolecular Engineering Rice University HoustonTX United States J.A. Woollam Co. LincolnNE United States The Smalley-Curl Institute Rice University HoustonTX United States Department of Chemistry Rice University HoustonTX United States Department of Materials Science and NanoEngineering Rice University HoustonTX United States Department of Physics and Astronomy Tokyo Metropolitan University Tokyo Japan Department Physics Tohoku University Sendai Japan Department Physics and Astronomy Rice University HoustonTX United States

We demonstrate tunable, giant, and structure-induced deep-ultraviolet circular dichroism in macroscopically chiral assemblies of racemic carbon nanotubes prepared using two approaches: mechanical-rotation-assisted vac... 详细信息

ISBN: (纸本)9781957171258

关键词： Dichroism

来源：评论

学校读者我要写书评

暂无评论

Orthogonal carbazole-perylene bisimide pentad:a photoconversion-tunable photosensitizer with diversified excitation and excited-state relaxation pathways

引用

science China Chemistry 2021年第12期64卷 2193-2202页

作者： Zhaolong Wang Yue Sun Simin Lin Gang Wang Xingmao Chang Xinyu Gou Taihong Liu Shengye Jin Gang He Yu-Chen Wei Pi-Tai Chou Yu Fang Key Laboratory of Applied Surface and Colloid Chemistry of Ministry of Education School of Chemistry and Chemical EngineeringShaanxi Normal UniversityXi’an710119China College of Life Sciences Shaanxi Normal UniversityXi’an710119China State Key Laboratory of Molecular Reaction Dynamics and Collaborative Innovation Center of Chemistry for Energy Materials(iChEM) Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalian116023China Frontier Institute of Science and Technology Xi’an Jiaotong UniversityXi’an710054China Department of Chemistry Taiwan UniversityTaipei10617China

Integrating multiple photosensitive properties into an“all-in-one”photosensitizer(PS)shows great promise for the treatment of cancers owing to synergistic effect among ***,the development of such PSs,especially those that need a single laser source,remains a ***,we report an orchestration of electron donors and acceptors in a propeller-like pentad,PBI-4Cz,where four carbazole(Cz)units are covalently linked to the ortho-positions of the perylene bisimide(PBI)*** intramolecular donor-acceptor interaction significantly quenches the luminescence and largely extends the absorption spectra to near-infrared ***-state dynamics investigated via femto-and nano-second transient absorption spectroscopy revealed exclusive charge separation of the PBI-4Cz within initial 0.5 ps when photoexcited regardless of which intermediate is *** dissipation of the resulting charge-separated state(PBI^(•−)-4Cz^(•−))is subjected to the toggle between intersystem-crossing toward excited triplet states and charge recombination toward ground *** importance of the two pathways can be tuned by micro-environmental polarity,which endows PBI-4Cz remarkable performances of singlet-oxygen generation(>90.0%)in toluene and photothermal conversion(∼28.6%)in *** intrinsic photostability and excited-state processes of heavy-atom-free PBI derivatives not only holds a promise for multifunctional phototheranostics,but also provides a prototype for designing high-performance PSs with tunable photoconversion pathways.

关键词： charge recombination charge separation perylene bisimide derivatives photosensitizers singlet oxygen generation

来源：评论

学校读者我要写书评

暂无评论

Magnetically separable silica-chitosan hybrids for efficient phosphate adsorption in aqueous solution

引用

Case Studies in chemical and Environmental engineering 2025年 11卷

作者： Nuryono, Nuryono Sukamto, Sukamto Kunarti, Eko Sri Krisbiantoro, Philip Anggo Wan Abdullah, Wan Nazwanie Kamiya, Yuichi Department of Chemistry Faculty of Mathematics and Natural Sciences Universitas Gadjah Mada Bulaksumur Yogyakarta 55281 Indonesia of Life Science Hokkaido University Kita 10 Nishi 8 Kita-ku Sapporo 060-0810 Japan International Graduate Program of Molecular Science and Technology National Taiwan University No. 1 Sec. 4 Roosevelt Road Taipei 10617 Taiwan Molecular Science and Technology Program Taiwan International Graduate Program Academia Sinica Taipei 11529 Taiwan Department of Chemical Engineering College of Engineering National Taiwan University Taipei 10617 Taiwan School of Chemical Science Universiti Sains Malaysia Gelugor Penang 11800 Malaysia Faculty of Environmental Earth Science Hokkaido University Nishi 5 Kita 10 Kita-ku Sapporo 060-0810 Japan

In the present study, magnetic silica-chitosan hybrid (NMP@SiO2/CPTMS/Chi) was synthesized via a convenient and green sol-gel technique under room temperature, and the material was used as a highly efficient magnetic ... 详细信息

In the present study, magnetic silica-chitosan hybrid (NMP@SiO₂/CPTMS/Chi) was synthesized via a convenient and green sol-gel technique under room temperature, and the material was used as a highly efficient magnetic adsorbent for the removal of phosphate ions in water. While the magnetic properties of NMP from iron enable the material to be quickly separated via magnetic separation, the abundant active sites from the chitosan made the hybrid exhibit high adsorption capacity for phosphate ions. At pH 6, the removal of phosphate ions followed the pseudo-second-order (PSO) kinetic model with the adsorption rate constant (k₂) of 5.9 × 10^-3 mg g⁻¹ min⁻¹ and obeyed the Langmuir isotherm model with a maximum adsorption capacity (q_max) of 15.06 mg g⁻¹, outperforming most of the previously reported adsorbents. Stability tests and derivative thermogravimetry (DTG) analysis demonstrated that NMP@SiO₂/CPTMS/Chi remained stable even under strongly acidic conditions and possessed high thermal stability, respectively. The synergistic combination of high adsorption capacity, acid stability, thermal stability, and facile magnetic separation renders NMP@SiO₂/CPTMS/Chi a promising adsorbent for wastewater treatment and environmental remediation. Overall, this innovative material represents a significant advancement in phosphate removal, offering a sustainable and effective solution to address the global challenge of water pollution and protect aquatic ecosystems. © 2025 The Authors

关键词： Adsorption Chitosan Magnetic material Phosphate Silica Sol-gel

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：