检索结果-内蒙古大学图书馆

arXiv 2023年

作者： Zhou, Zishun Ma, Liping Liu, Xilong Cao, Zhiqiang Yu, Junzhi The Institute of Automation Chinese Academy of Sciences Beijing100190 China The College of Electrical Engineering and Computer Science Australian National University Canberra2601 Australia The State Key Laboratory of Management and Control for Complex Systems Institute of Automation Chinese Academy of Sciences Beijing100190 China The School of Artificial Intelligence University of Chinese Academy of Sciences Beijing100049 China The State Key Laboratory for Turbulence and Complex System Department of Advanced Manufacturing and Robotics BIC-ESAT College of Engineering Peking University Beijing100871 China

Precise calibration is the basis for the vision-guided robot system to achieve high-precision operations. systems with multiple eyes (cameras) and multiple hands (robots) are particularly sensitive to calibration errors, such as micro-assembly systems. Most existing methods focus on the calibration of a single unit of the whole system, such as poses between hand and eye, or between two hands. These methods can be used to determine the relative pose between each unit, but the serialized incremental calibration strategy cannot avoid the problem of error accumulation in a large-scale system. Instead of focusing on a single unit, this paper models the multi-eye and multi-hand system calibration problem as a graph and proposes a method based on the minimum spanning tree and graph optimization. This method can automatically plan the serialized optimal calibration strategy in accordance with the system settings to get coarse calibration results initially. Then, with these initial values, the closed-loop constraints are introduced to carry out global optimization. Simulation experiments demonstrate the performance of the proposed algorithm under different noises and various hand-eye configurations. In addition, experiments on real robot systems are presented to further verify the proposed method. © 2023, CC BY-SA.

关键词： Multipurpose robots

来源：评论

学校读者我要写书评

暂无评论

3D Scene Flow Estimation on Pseudo-LiDAR: Bridging the Gap on Estimating Point Motion

arXiv

引用

arXiv 2022年

作者： Jiang, Chaokang Wang, Guangming Miao, Yanzi Wang, Hesheng Engineering Research Center of Intelligent Control for Underground Space Ministry of Education School of Information and Control Engineering Advanced Robotics Research Center China University of Mining and Technology Xuzhou221116 China Department of Automation Key Laboratory of System Control and Information Processing Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai200240 China

3D scene flow characterizes how the points at the current time flow to the next time in the 3D Euclidean space, which possesses the capacity to infer autonomously the non-rigid motion of all objects in the scene. The previous methods for estimating scene flow from images have limitations, which split the holistic nature of 3D scene flow by estimating optical flow and disparity separately. Learning 3D scene flow from point clouds also faces the difficulties of the gap between synthesized and real data and the sparsity of LiDAR point clouds. In this paper, the generated dense depth map is utilized to obtain explicit 3D coordinates, which achieves direct learning of 3D scene flow from 2D images. The stability of the predicted scene flow is improved by introducing the dense nature of 2D pixels into the 3D space. Outliers in the generated 3D point cloud are removed by statistical methods to weaken the impact of noisy points on the 3D scene flow estimation task. Disparity consistency loss is proposed to achieve more effective unsupervised learning of 3D scene flow. The proposed method of self-supervised learning of 3D scene flow on real-world images is compared with a variety of methods for learning on the synthesized dataset and learning on LiDAR point clouds. The comparisons of multiple scene flow metrics are shown to demonstrate the effectiveness and superiority of introducing pseudo-LiDAR point cloud to scene flow estimation. © 2022, CC BY.

关键词： Three dimensional computer graphics

来源：评论

学校读者我要写书评

暂无评论

Stabilization of discrete time stochastic linear systems with time delay via event-triggered control

Stabilization of discrete time stochastic linear systems wit...

引用

Chinese automation Congress (CAC)

作者： Jian Dong Xiaofeng Zong School of Automation( China University of Geosciences) Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan People’s Republic of China

ISBN: (纸本)9781665426480

This paper presents the stabilization problem of a class of discrete-time stochastic linear systems with time delay using an event-triggered control(ETC) strategy. For the general linear systems, we propose a new event triggering mechanism and deduce sufficient conditions for mean square exponentially stabilizability(MSES) and almost sure exponentially stabilizability(ASES) via ETC. The results show that the stability of the system depends on the system parameters (time delay, noise, event trigger threshold parameter, and unstable characteristic value of the original system). When the feedback control is disturbed by low-intensity noise, the unstable system can be stable in the mean square. Finally, the validity of the theoretical results is illustrated through a simulation example.

关键词： Linear systems Sufficient conditions automation Delay effects Stability analysis Feedback control

来源：评论

学校读者我要写书评

暂无评论

A novel signal processing algorithm for measurement while drilling(MWD) system

A novel signal processing algorithm for measurement while dr...

引用

第40届中国控制会议

作者： ShiLong Cheng Yule Hu School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Faculty of Engineering China University of Geosciences

Measurement while drilling(MWD) is a widely used signal transmission technology in the drilling *** present,the domestic pulse identification method is relatively simple,using the basic threshold method to identify,only set the threshold which will leading a number of missing detection mud pulse in the complex working *** this paper,a novel data processing algorithm is proposed for measurement while drilling *** method designed in this paper identifies the start time of data frame by using correlation coefficient and synchronization head model,then,based on the principle that the amplitude of mud pulse signal is larger than that of noise pulse signal,the maximum pulse signal in the length of a group of mud pulse series is extracted as mud pulse *** simulation is executed using the data from the actual drilling process and the results show the effectiveness of the proposed method.

关键词： Measurement while drilling Pulse recognition Correlation coefficient Sliding time window

来源：评论

学校读者我要写书评

暂无评论

Smart Infrared Temperature Measurement system Based On Elastic Compute Service Platform

Smart Infrared Temperature Measurement System Based On Elast...

引用

Chinese automation Congress (CAC)

作者： Yongbo Li Li Yuan School of Automation( China University of Geosciences) Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan People’s Republic of China

ISBN: (纸本)9781665426480

In the fight against the novel coronavirus, this paper designs a smart infrared temperature measurement system based on the Elastic Compute Service platform. In the perceptual layer part of the Internet of Things(IoT), the system uses infrared temperature sensors to quickly collect the temperature of the forehead or arm of the human body and Uses the MCU to automatically transmits the measured data to the Elastic Compute Service through the WiFi module. In the network layer part of the Internet of Things,the data written into the database of the Elastic Compute Service through the program deployed on the Elastic Compute Service. In the application layer of the Internet of Things, the remote management terminal monitors the collected body temperature data in real-time and provides quick warnings. Finally, the User can log in to the applet on his mobile phone to quickly and easily obtain personal information.

关键词： Temperature measurement Temperature sensors Temperature distribution Forehead Databases Real-time systems Mobile handsets

来源：评论

学校读者我要写书评

暂无评论

Unsupervised Learning of 3D Scene Flow with 3D Odometry Assistance

arXiv

引用

arXiv 2022年

作者： Wang, Guangming Feng, Zhiheng Jiang, Chaokang Wang, Hesheng Department of Automation Key Laboratory of System Control and Information Processing of Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai200240 China Engineering Research Center of Intelligent Control for Underground Space Ministry of Education School of Information and Control Engineering Advanced Robotics Research Center China University of Mining and Technology Xuzhou221116 China

Scene flow represents the 3D motion of each point in the scene, which explicitly describes the distance and the direction of each point’s movement. Scene flow estimation is used in various applications such as autonomous driving fields, activity recognition, and virtual reality fields. As it is challenging to annotate scene flow with ground truth for real-world data, this leaves no real-world dataset available to provide a large amount of data with ground truth for scene flow estimation. Therefore, many works use synthesized data to pre-train their network and real-world LiDAR data to finetune. Unlike the previous unsupervised learning of scene flow in point clouds, we propose to use odometry information to assist the unsupervised learning of scene flow and use real-world LiDAR data to train our network. Supervised odometry provides more accurate shared cost volume for scene flow. In addition, the proposed network has mask-weighted warp layers to get a more accurate predicted point cloud. The warp operation means applying an estimated pose transformation or scene flow to a source point cloud to obtain a predicted point cloud and is the key to refining scene flow from coarse to fine. When performing warp operations, the points in different states use different weights for the pose transformation and scene flow transformation. We classify the states of points as static, dynamic, and occluded, where the static masks are used to divide static and dynamic points, and the occlusion masks are used to divide occluded points. The mask-weighted warp layer indicates that static masks and occlusion masks are used as weights when performing warp operations. Our designs are proved to be effective in ablation experiments. The experiment results show the promising prospect of an odometry-assisted unsupervised learning method for 3D scene flow in real-world data. Copyright © 2022, The Authors. All rights reserved.

关键词： Deep learning

来源：评论

学校读者我要写书评

暂无评论

Effective Throughput Optimization of SAG Milling Process Based on BPNN and Genetic Algorithm

Effective Throughput Optimization of SAG Milling Process Bas...

引用

Industrial Cyber-Physical systems (ICPS)

作者： Zhenhong Liao Ce Xu Wen Chen Qifu Chen Feng Wang Jinhua She School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Department of Mineral Resources Development and Utilization Changsha Research Institute of Mining and Metallurgy CO. LTD. Chagnsha China Hunan Valin Lianyuan Iron And Steel Co. Ltd. Loudi China School of Engineering Tokyo University of Technology Hachioji Tokyo Japan

Grinding is an energy-consuming process in mineral processing industry. Improving grinding processing capacity per unit power consumption is an effective means to reduce grinding production cost. In this paper, a new index for evaluating the effective processing throughput of SAG milling is proposed. The production process model is established by BP neural network (BPNN). Through combining the process mechanism and production constraints, the genetic algorithm is adopted to optimize the operating parameters of the SAG milling process to maximize the effective throughput, thus improving the grinding efficiency. The experimental results showed that through optimization of effective throughput function proposed in this paper, the SAG mill processing capacity has been increased by 4% and the operating power drawn reduced by 1.12%. It has important guiding significance for the actual production process.

关键词： Industries Power demand Neural networks Milling Throughput Minerals Materials processing

来源：评论

学校读者我要写书评

暂无评论

Pseudo-LiDAR for Visual Odometry

arXiv

引用

arXiv 2022年

作者： Deng, Huiying Wang, Guangming Feng, Zhiheng Jiang, Chaokang Wu, Xinrui Miao, Yanzi Wang, Hesheng Advanced Robotics Research Center AI Research Institute School of Information and Control Engineering China University of Mining and Technology Xuzhou221116 China Department of Automation Key Laboratory of System Control and Information Processing of Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai200240 China

As one of the important tasks in the field of robotics and machine vision, LiDAR/visual odometry provides tremendous help for various applications such as navigation, location, etc. In the existing methods, LiDAR odometry shows superior performance, but visual odometry is still widely used for its price advantage. Conventionally, the task of visual odometry mainly rely on the input of continuous images. However, it is very complicated for the odometry network to learn the epipolar geometry information provided by the images. In this paper, the concept of pseudo-LiDAR is introduced into the odometry to solve this problem. The pseudo-LiDAR point cloud back-projects the depth map generated by the image into the 3D point cloud, which changes the way of image representation. Compared with the stereo images, the pseudo-LiDAR point cloud generated by the stereo matching network can get the explicit 3D coordinates. Since the 6 Degrees of Freedom (DoF) pose transformation occurs in 3D space, the 3D structure information provided by the pseudo-LiDAR point cloud is more direct than the image. Compared with sparse LiDAR, the pseudo-LiDAR has a denser point cloud. In order to make full use of the rich point cloud information provided by the pseudo-LiDAR, a projection-aware dense odometry pipeline is adopted. Most previous LiDAR-based algorithms sampled 8192 points from the point cloud as input to the odometry network. The projection-aware dense odometry pipeline takes all the pseudo-LiDAR point clouds generated from the images except for the error points as the input to the network. While making full use of the 3D geometric information in the images, the semantic information in the images is also used in the odometry task. The fusion of 2D-3D is achieved in an image-only based odometry. Experiments on the KITTI dataset prove the effectiveness of our method. To the best of our knowledge, this is the first visual odometry method using pseudo-LiDAR. Copyright © 2022, The Authors. A

关键词： Pipelines

来源：评论

学校读者我要写书评

暂无评论

Applications of MXenes in human-like sensors and actuators

引用

Nano Research 2023年第4期16卷 5767-5795页

作者： Jinbo Pang Songang Peng Chongyang Hou Xiao Wang Ting Wang Yu Cao Weijia Zhou Ding Sun Kai Wang Mark H.Rümmeli Gianaurelio Cuniberti Hong Liu Institute for Advanced Interdisciplinary Research(iAIR) Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of ShandongUniversity of JinanJinan 250022China Institute for Materials Science and Max Bergmann Center of Biomaterials Technische Universität DresdenDresden 01069Germany Center for Advancing Electronics Dresden Technische Universität DresdenDresden 01069Germany Dresden Center for Computational Materials Science Technische Universität DresdenDresden 01062Germany Dresden Center for Intelligent Materials(GCL DCIM) Technische Universität DresdenDresden 01062Germany High-Frequency High-Voltage Device and Integrated Circuits R&D Center Institute of MicroelectronicsChinese Academy of SciencesBeijing 100029China Key Laboratory of Microelectronic Devices&Integrated Technology Institute of MicroelectronicsChinese Academy of SciencesBeijing 100029China Shenzhen Key Laboratory of Nanobiomechanics Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China State Key Laboratory of Biobased Material and Green Papermaking Qilu University of TechnologyShandong Academy of SciencesJinan 250353China School of Bioengineering Qilu University of TechnologyShandong Academy of ScienceJinan 250353China Key Laboratory of Modern Power System Simulation and Control&Renewable Energy Technology(Ministry of Education) Northeast Electric Power UniversityJilin 132012China School of Electrical Engineering Northeast Electric Power UniversityJilin 132012China School of Electrical Engineering Weihai Innovation Research InstituteQingdao UniversityQingdao 266000China School of Electrical and Computer Engineering Jilin Jianzhu UniversityChangchun 130118China Institute for Complex Materials Leibniz Institute for Solid State and Materials Research Dresden(IFW Dresden)20 Helmholtz StrasseDresden 01069Germany College of Energy Soochow Institute for Energy and Materials Innovations Soochow UniversitySuzhou 215006China Key L

Human beings perceive the world through the senses of sight,hearing,smell,taste,touch,space,and *** first five senses are prerequisites for people to *** sensing organs upload information to the nervous systems,including the brain,for interpreting the surrounding ***,the brain sends commands to muscles reflexively to react to stimuli,including light,gas,chemicals,sound,and ***,as an emerging two-dimensional material,has been intensively adopted in the applications of various sensors and *** this review,we update the sensors to mimic five primary senses and actuators for stimulating muscles,which employ MXene-based film,membrane,and composite with other functional ***,a brief introduction is delivered for the structure,properties,and synthesis methods of ***,we feed the readers the recent reports on the MXene-derived image sensors as artificial retinas,gas sensors,chemical biosensors,acoustic devices,and tactile sensors for electronic ***,the actuators of MXene-based composite are ***,future opportunities are given to MXene research based on the requirements of artificial intelligence and humanoid robot,which may induce prospects in accompanying healthcare and biomedical engineering applications.

关键词： MXenes sensors actuators gas sensors biosensors tactile sensors sound sensors artificial retina

来源：评论

学校读者我要写书评

暂无评论

Suppressing Stick-Slip Vibration of Drill-String system Subject to Actuator Saturation

Suppressing Stick-Slip Vibration of Drill-String System Subj...

引用

第40届中国控制会议

作者： Zhaoqing He Chengda Lu Min Wu Jun Gao School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education CCTEG Xi'an Research Institute

In this paper, the actuator saturation of drill-rig is considered in the mitigation of stick-slip vibration of the drill-string system. Firstly, the dynamic of stick-slip vibration is described by the combination of a multi-degree-of-freedom drill-string model and a bit-rock interaction model. To suppress stick-slip vibration while reducing the effect of saturation on control performance, a dynamic output feedback controller with an anti-windup compensator is introduced. Then, stability analysis of the resulting closed-loop system is carried out. By solving an optimization problem, the gain matrix of the anti-windup compensator is obtained. Finally, a case study is used to show the effectiveness of the method.

关键词： Drill-string system actuator saturation stick-slip vibration anti-windup compensator

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：