检索结果-内蒙古大学图书馆

Journal of engineering Research (Kuwait) 2025年

作者： Al-Dabbous, Abdullah N. Goel, Anju Alsulaili, Abdalrahman Al-Dabbous, Shoug Kh. Shalash, Musaed Environmental and Climate Change Program Environment & Life Sciences Research Center Kuwait Institute for Scientific Research Kuwait The Energy and Resources Institute New Delhi India Civil Engineering Department College of Engineering and Petroleum Kuwait University Kuwait

Inhaling quality air is crucial for good health. Therefore, investigating air quality in various microenvironments, especially indoors where people spend most of their time, is essential. This study examines particulate matter (PM) concentrations in a vehicle cabin over one week in September, representing late summertime conditions. It focuses on measuring PM mass and count across various size ranges (0.3–0.5, 0.5–1.0, 1.0–2.5, 2.5–5.0, 5.0–10.0, 10.0–25.0 μm) under different ventilation settings in a private vehicle on one of Kuwait's busiest highways. Thirty-five runs were conducted across five ventilation settings over seven days. These settings included combinations of AC fan speeds, recirculation status, window positions (open and closed), and smoking activities. No significant trends were observed between weekends and weekdays due to minimal traffic differences. However, distinct PM mass and count concentration variations were noted across ventilation settings. Setting 5 (AC at medium fan speed, vent and windows closed, smoking allowed) had the highest PM mass and count concentrations in smaller sizes (diameter ≤2.5 μm) due to active smoking. Setting 1 (AC off, vent and windows open, no smoking) recorded the second-highest PM mass (diameter ≥2.5 μm) and count (diameter ≤2.5 μm) concentrations due to outdoor pollution. PM mass and count concentrations were lowest under settings 2–4, with negligible differences between them, attributed to the relative restriction of air intake. The highest exposure levels were observed in setting 1, where windows were open, and the lowest in settings with closed windows and AC in recirculation mode. Exposure levels at hotspots were up to 200 % higher. Proximity to construction activities further increased exposure. © 2025 The Authors

关键词： Kuwait Particulate matter Smoking Vehicle cabin Ventilation settings

来源：评论

学校读者我要写书评

暂无评论

Increasing risk of oppressive heatwaves over India in the future warming

arXiv

引用

arXiv 2025年

作者： Sudharsan, Naveen Singh, Jitendra Ghosh, Subimal Karmakar, Subhankar Environmental Science and Engineering Department Indian Institute of Technology Maharashtra Bombay India Department of Environmental Systems Science ETH Zürich Zürich Switzerland Department of Civil Engineering Indian Institute of Technology Maharashtra Bombay India Interdisciplinary Program in Climate Studies Indian Institute of Technology Maharashtra Bombay India Centre for Urban Science & Engineering Indian Institute of Technology Maharashtra Bombay India

The frequency of heatwave events has been increasing with climate change across the globe, causing devastating impacts on human and natural systems. Particularly, the co-occurrence of high temperature with high humidity has the potential of worse impacts on human health than extreme temperature alone. We use observations to examine the characteristics of extreme (high temperature and low humidity) and oppressive (high temperature and high humidity) heatwaves and their impacts on human mortality. We also use climate model simulations to understand the likelihood of heatwaves under varied warming conditions in future climates. We find an increasing trend in the number of days of extreme and oppressive heatwaves, with surprisingly a higher rate of increase in oppressive heatwaves. We also observe a higher correlation between oppressive heatwaves and historical heat-stress-related human deaths than extreme heatwaves, indicating more substantial impacts of oppressive heatwaves on the human population than extreme heatwaves. Further, our results show a five-fold increase in the number of days of oppressive heatwaves under 1.5°warming in both mid (2035-2065) and end (2070- 2100) of the 21st century, relative to the historical period (1975 to 2005) whereas the number of extreme heatwave days remains relatively constant in mid and end of this century. Remarkably, 2°warming results in an eight-fold and almost two-fold increase in the number of days of oppressive heatwaves by the end of the century relative to the historical period and 1.5°warming conditions. These results suggest that limiting the mean global warming to 1.5°can reduce the likelihood of oppressive and extreme heatwaves by 44% and 25% by the end of the century relative to the 2°warming world. Moreover, the remarkable increase in oppressive heatwave days highlights the elevated risk of heatwaves over densely populated countries and indicates an imminent need for adaptation measures. © 2025, CC BY.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Potential recovery of precious metals from waste laptops in Jordan

引用

Rare Metals 2015年第7期34卷 517-521页

作者： Mohammad A.T.Alsheyab Program Manager of Civil and Environmental Engineering Qatar Foundation

To achieve a sustainable development in the electronic and electrical equipment(EEE) industry, it is necessary to protect the available natural *** addition, to satisfy the increasing demand on EEE, it is necessary to provide alternative sources of raw *** this paper, laptops were imported to Jordan in 2011 as an example to show the potential recovery of metals and precious metals from high grade waste electronic and electrical equipment by conducting a mass flow rate analysis using the STAN *** results show that considerable amounts of gold, silver, cobalt, palladium,and copper could be *** will reduce the amounts needed from primary natural resources and offset the CO2 emissions produced from mining the primary raw material resources.

关键词： Precious metals Laptops Waste of electronic and el

来源：评论

学校读者我要写书评

暂无评论

Communal-based domestic rainwater harvesting system: A novel approach to alternative solutions for increasing water supply and recharging groundwater in Jagakarsa urban area, South Jakarta

Case Studies in Chemical and Environmental Engineering

引用

Case Studies in Chemical and environmental engineering 2025年 11卷

作者： Suprapti, Suprapti Kusuma, Muhammad Syahril Badri Kardhana, Hadi Cahyono, Muhammad Juliana, Imroatul Chalimah Doctoral Program of Civil Engineering Faculty of Civil and Environmental Engineering Institut Teknologi Bandung Jl. Ganesha No. 10 Jawa Barat Bandung 40132 Indonesia Water Resources Engineering Group Faculty of Civil and Environmental Engineering Institut Teknologi Bandung Jl. Ganesha No. 10 Jawa Barat Bandung 40132 Indonesia Civil Engineering Department Faculty of Engineering and Sciences Ibnu Khaldun Bogor University Jl. Sholeh Iskandar Km. 2 Jawa Barat Kota Bogor 16162 Indonesia Research Center for Ecohydrology Ecohydraulics and Engineering Science Bandung Jl. Babakan Jeruk 1 No. 100 Jawa Barat Bandung 40132 Indonesia Civil Engineering Study Program Sriwijaya University Jl. Raya Lintas Timur Palembang - Prabumulih No. Km. 32 Indralaya Indah South Sumatra Indralaya Indonesia Study Program of Civil Engineering Faculty of Engineering Universitas Mercu Buana Jl. Meruya Selatan No. 01 Kembangan-Jakarta Barat Jakarta 11650 Indonesia

This study proposes a new approach, a communal-based domestic rainwater harvesting (CDRWH) system, which is a new model that combines domestic and communal rainwater harvesting systems. This model is an alternative solution to improve system performance and utilize rainwater overflow from the system. Rainwater runoff from several domestic tanks is channeled to a communal tank to be collected, processed, and redistributed to needy domestic tanks. Overflow from the communal tank is used for groundwater recharge. The CDRWH system model aims to increase water supply, reduce runoff, and conserve groundwater. The model simulation uses daily water balance analysis and yield before spillage algorithm. The simulation scenario uses variations in roof area, number of house occupants, storage tank volume, and rainfall categories: 20 years, wet year, normal year, and dry year. Jagakarsa, an urban area in South Jakarta, was selected for the CDRWH system modeling. The results showed that the CDRWH model significantly improved the performance of the volumetric reliability (VR) and time reliability (TR) systems. In addition, the model could show a comparison of total groundwater recharge (GWR) and groundwater extraction (GWE), where the GWR capacity was higher. This allows centralized rainwater management in communal tanks, thereby reducing groundwater usage. The design of this model is simple. Therefore it can be easily duplicated for application in other locations. © 2025 The Authors

关键词： Communal-based domestic rainwater harvesting (CDRWH) Groundwater extraction (GWE) Groundwater recharge (GWR) Jagakarsa-South Jakarta Reduced runoff Water supply

来源：评论

学校读者我要写书评

暂无评论

Improving the Performance of Asphalt Mixtures with Highly Acidic Aggregates in Central Vietnam Using Modifier Based on Styrene-Butadiene-Styrene and Rosin Resin

引用

Journal of Materials in civil engineering 2025年第7期37卷

作者： Nguyen, Lan Ngoc Lee, Hosin David Bui, Lam Tung Kim, Young-Ik Truong, Van Quyet Nguyen, May Huu Nguyen, Du Van Dept. of Construction Materials Faculty of Construction Engineering Univ. of Transport and Communications No. 03 Cau Giay Hanoi100000 Viet Nam Dept. of Civil and Environmental Engineering Iowa Technology Institute The Univ. of Iowa Iowa CityIA52242 United States Research Dept. Hansoo Natech Co. Ltd. 6-20 Yuseong-daero 1205beon-gil Yuseong-gu Daejeon34104 Korea Republic of Civil and Environmental Engineering Program Graduate School of Advanced Science and Engineering Hiroshima Univ. 1-4-1 Kagamiyama Higashi-Hiroshima Hiroshima739-8527 Japan Faculty of Civil Engineering Univ. of Transport and Communications Campus in Ho Chi Minh City Ho Chi Minh City700000 Viet Nam

In Central Vietnam, the aggregate typically originates from highly acidic rocks containing a significant amount of silicon dioxide (SiO2), leading to poor adhesion quality with virgin asphalt binder. Hence, the asphalt mixture production usually needs to utilize adhesion promoters. Based on the chemical compositions of the sample aggregate (up to 72.3% SiO2), research has been conducted to introduce an adhesive agent called rubber modified compound (RMC-160), which is composed of styrene-butadiene-styrene (SBS) with petroleum hydrocarbon resin, treated clay and mineral oil. This article presents the research findings regarding the adhesion effectiveness of RMC-160-modified asphalt binder to high acid-based aggregate through laboratory and field tests, along with the mixture performance under both short-term oven aging (STOA) and long-term oven aging (LTOA). The test results exhibited remarkable effects, whereby the asphalt binder modified with RMC-160 additive significantly increased the adhesion level from Grade 2 to Grade 4, and the asphalt mixtures containing RMC-160 had lower rutting and higher cracking tolerance (CTIndex) under both the STOA and LTOA conditions. © 2025 American Society of civil Engineers.

关键词： Silicon oxides

来源：评论

学校读者我要写书评

暂无评论

A preliminary data fusion study to assess the feasibility of Foundation Process-Property Models in Laser Powder Bed Fusion

arXiv

引用

arXiv 2025年

作者： Vendrell-Gallart, Oriol Negarandeh, Nima Foumani, Zahra Zanjani Amiri, Mahsa Valdevit, Lorenzo Bostanabad, Ramin Department of Mechanical and Aerospace Engineering University of California IrvineCA92697 United States Materials and Manufacturing Technology Program University of California IrvineCA92697 United States Department of Materials Science and Engineering University of California IrvineCA92697 United States Department of Civil and Environmental Engineering University of California IrvineCA92697 United States

Foundation models are at the forefront of an increasing number of critical applications. In regards to technologies such as additive manufacturing (AM), these models have the potential to dramatically accelerate process optimization and, in turn, design of next generation materials. A major challenge that impedes the construction of foundation process-property models is data scarcity. To understand the impact of this challenge, and since foundation models rely on data fusion, in this work we conduct controlled experiments where we focus on the transferability of information across different material systems and properties. More specifically, we generate experimental datasets from 17-4 PH and 316L stainless steels (SSs) in Laser Powder Bed Fusion (LPBF) where we measure the effect of five process parameters on porosity and hardness. We then leverage Gaussian processes (GPs) for process-property modeling in various configurations to test if knowledge about one material system or property can be leveraged to build more accurate machine learning models for other material systems or properties. Through extensive cross-validation studies and probing the GPs’ interpretable hyperparameters, we study the intricate relation among data size and dimensionality, complexity of the process-property relations, noise, and characteristics of machine learning models. Our findings highlight the need for structured learning approaches that incorporate domain knowledge in building foundation process-property models rather than relying on uninformed data fusion in data-limited applications. © 2025, CC BY.

关键词： Data fusion

来源：评论

学校读者我要写书评

暂无评论

Nexus between polymer support and metal oxide nanoparticles in hybrid nanosorbent materials （HNMs） for sorption/desorption of target ligands

引用

Frontiers of environmental Science & engineering 2015年第5期9卷 929-938页

作者： Ryan C. SMITH Jinze LI Surapol PADUNGTHON Arup K. SENGUPTA Environmental Engineering Program Department of Civil and Environmental Engineering Lehigh University Bethlehem PA 18015 USA

Metal oxide nanoparticles like hydrated ferric oxide （HFO） or hydrated zirconium oxide （HZrO） are excellent sorbents for environmentally significant ligands like phosphate, arsenic, or fluoride, present at trace concentrations. Since the sorption capacity is surface dependent for HFO and HZrO, nanoscale sizes offer significant enhancement in performance. However, due to their miniscule sizes, low attrition resistance, and poor durability they are unable to be used in typical plug-flow column setups. Meanwhile ion exchange resins, which have no specific affinity toward anionic ligands, are durable and chemically stable. By impregnating metal oxide nanoparticles inside a polymer support, with or without functional groups, a hybrid nanosorbent material （HNM） can be prepared. A HNM is durable, mechanically strong, and chemically stable. The functional groups of the polymeric support will affect the overall removal effi- ciency of the ligands exerted by the Donnan Membrane Effect. For example, the removal of arsenic by HFO or the removal of fluoride by HZrO is enhanced by using anion exchange resins. The HNM can be precisely tuned to remove one type of contaminant over another type. Also, the physical morphology of the support material, spherical bead versus ion exchange fiber, has a significant effect on kinetics of sorption and desorption. HNMs also possess dual sorption sites and are capable of removing multiple contaminants, namely, arsenate and perchlorate, concurrently.

关键词： ion exchange sorpfion arsenic perchlorat~,fluoride

来源：评论

学校读者我要写书评

暂无评论

Characterization of halogenated DBPs and identification of new DBPs trihalomethanols in chlorine dioxide treated drinking water with multiple extractions

引用

Journal of environmental Sciences 2017年第8期58卷 83-92页

作者： Jiarui Han Xiangru Zhang Jiaqi Liu Xiaohu Zhu Tingting Gong Environmental Engineering Program Department of Civil and Environmental Engineering The Hong Kong University of Science and Technology School of the Environment Nanjing University

Chlorine dioxide(ClO2) is a widely used alternative disinfectant due to its high biocidal efficiency and low-level formation of trihalomethanes and haloacetic acids. A major portion of total organic halogen(TOX), a collective parameter for all halogenated DBPs, formed in ClO2-treated drinking water is still unknown. A commonly used pretreatment method for analyzing halogenated DBPs in drinking water is one-time liquid–liquid extraction(LLE), which may lead to a substantial loss of DBPs prior to analysis. In this study, characterization and identification of polar halogenated DBPs in a ClO2-treated drinking water sample were conducted by pretreating the sample with multiple extractions. Compared to one-time LLE, the combined four-time LLEs improved the recovery of TOX by 2.3 times. The developmental toxicity of the drinking water sample pretreated with the combined four-time LLEs was 1.67 times higher than that pretreated with one-time *** the aid of ultra-performance liquid chromatography/electrospray ionization-triple quadrupole mass spectrometry, a new group of polar halogenated DBPs, trihalomethanols,were detected in the drinking water sample pretreated with multiple extractions; two of them,trichloromethanol and bromodichloromethanol, were identified with synthesized standard compounds. Moreover, these trihalomethanols were found to be the transformation products of trihalomethanes formed during ClO2disinfection. The results indicate that multiple LLEs can significantly improve extraction efficiencies of polar halogenated DBPs and is a better pretreatment method for characterizing and identifying new polar halogenated DBPs in drinking water.

关键词： Disinfection byproducts DBPs Chlorine dioxide treatment Multiple extractions Toxicity

来源：评论

学校读者我要写书评

暂无评论

MEASUREMENT AND MODELING OF WESTERN WASHINGTON PRECIPITATION CHEMISTRY

引用

WATER AIR AND SOIL POLLUTION 1985年第1期26卷 71-84页

作者： VONG, RJ LARSON, TV COVERT, DS WAGGONER, AP Environmental Engineering and Science Program Department of Civil Engineering University of Washington Seattle USA

Precipitation was collected and chemically analyzed for a 1 yr period at four sites in western Washington. Spatial and seasonal variabilities in concentrations were identified with the highest concentrations nearest emission sources and in the summer. Multiple correlations among measured species revealed five groupings which were interpreted as the influences of seasalt, metals from a Cu smelter, an urban factor, soil, and acidic sulfate aerosol. A simple washout model predicted that the Cu smelter was the major contributor to a budget for rainwater sulfate. Measurement uncertainties were estimated for each analyte.

关键词： METEOROLOGY

来源：评论

学校读者我要写书评

暂无评论

ANALYSIS OF ACID-VOLATILE SULFIDE (AVS) AND SIMULTANEOUSLY EXTRACTED METALS (SEM) FOR THE ESTIMATION OF POTENTIAL TOXICITY IN AQUATIC SEDIMENTS

引用

environmental TOXICOLOGY AND CHEMISTRY 1993年第8期12卷 1441-1453页

作者： ALLEN, HE FU, GM DENG, BL Environmental Engineering Program Department of Civil Engineering University of Delaware Newark Delaware 19716

Acid-volatile sulfide (AVS) and simultaneously extracted metals (SEM) are operationally defined methods for the analysis of sulfide and associated metals in aquatic sediments. The SEM-to-AVS ratio has been useful in explaining the results of bioassay tests of metal toxicants. This paper describes apparatus that can be used in the evolution of sulfide from sediments and a method for the analysis of the evolved sulfide and the liberated metal. The method was studied with respect to gas flow rate, digestion time, and acid concentration. Liberated and trapped sulfide was determined by a colorimetric method of analysis. Using the apparatus and conditions described in this paper, the colorimetric method of analysis is capable of detecting AVS at concentrations normally encountered with a recovery of sulfide of at least 90%. High precision is possible if this apparatus is used. The limit of detection of the method is approximately 0.01 mumol/g dry sediment. We added 6 M HCl to produce a final concentration of approximately 1 M for the release of the AVS and SEM from unheated samples. We found that sulfide was not released from pyrite (FeS2) or copper sulfide (CuS) under these conditions. The liberation of copper from the two studied sediments indicates that copper was probably associated with another phase in these sediments. AVS is stable for several weeks in refrigerated or frozen samples.

关键词： ACID-VOLATILE SULFIDE SIMULTANEOUSLY EXTRACTED METALS SEDIMENT COPPER TOXICITY

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：