检索结果-内蒙古大学图书馆

MACHINERY ARRANGEMENT DESIGN - A PERSPECTIVE

NAVAL ENGINEERS JOURNAL 1981年第3期93卷 133-141页

作者： RESNER, ME KLOMPARENS, SH LYNCH, JP Mr. Michael E. Resner:received an Engineering Degree from Texas A&M University in 1966 and has done graduate work in management at American University. He is Director Machinery Arrangements/Control Systems and Industrial Facilities Division (SEA 525) at the Naval Sea Systems Command. His previous positions have included Program Manager Solar Total Energy Program at the Department of Energy and Branch Chief Machinery Control Systems Branch at the Naval Ship Engineering Center. Mr. Stephen H. Klomparens:is a Naval Architect at Designers & Planners Inc. and is engaged in development of computer aids for ship design. He received his B.S.E. degree in Naval Architecture and Marine Engineering from the University of Michigan in 1973 and his M.S. degree in Computer Science from the Johns Hopkins University. Mr. Kolmparens began his professional career at Hydronautics Inc. in 1974 where he was involved in the use of marine laboratory facilities for test and development of conventional and advanced marine craft. Since 1977 he has been involved with naval and commercial ship design and with development of computer-aided ship design tools. Mr. John P. Lynch:is a Principal Marine Engineer with Hydronautics Inc. He was previously employed in the auxiliary machinery and computer-aided design divisions of the David W. Taylor Naval Ship R&D Center the machinery design division of the New York Naval Shipyard and the machinery arrangement code of the Bureau of Ships. His active naval service was as a ship superintendent in the production department of the Long Beach Naval Shipyard. Mr. Lynch received his B. S. degree in Marine Engineering from the New York State Maritime College and his M.S. degree in Mechanical Engineering from Columbia University. He is a licensed Professional Engineer in the State of New York and a member of ASNE.

The machinery arrangement design process has remained relatively unchanged over the years. Recently, external demands have been placed on both the product and the producers that call for changes to this process. This paper cites these external demands and traces the evolution of the process changes from the rule-of-thumb machinery box sizing routines up to the current automated procedures. The machinery arrangement design practice is presented, and existing analytic and graphics aids are discussed. The user requirements for improved design aids are presented, with implementation guidelines and hardware/software alternatives.

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE AGE OF SAIL - IS IT OVER

引用

NAVAL ENGINEERS JOURNAL 1981年第2期93卷 145-153页

作者： MORISSEAU, KC THE AUTHOR:: graudated from the New York State Maritime College in 1956 receiving his B.S. degree in Marine Engineering. He then reported to the Navy's Bureau of Ships where he was assigned to the Hull Mechanical Section (Code 447) in the Hull Design Branch (Code 440). During this period he was involved in the contract design of various materials handling features of naval ships including vehicle and cargo handling for Amphibious Ships electronics equipment handling and replenishment at sea and in addition management of the Design Division's computer installation. In 1964 he became the Hull Project Coordinator for the AOR 1 Class AO(J) 51 Class and the AOE 3 Class ships and after completing their contract designs was transferred to the Auxiliary Type Desk and reassigned as AE 26 Class Project Engineer. From 1965 until 1974 he was the Program Manager for the FAST System and the Missile/Cargo STREAM System in the Underway Replenishment Project Office (PMS-390) Underway Replenishment Division (SHIPS-490) and its organizational predecessors. In April 1974 when SHIPS-490 and SHIPS-427 were merged he became Head of the Underway Replenishment Improvement Branch in the Amphibious and Combat Support Ship Logistics Division (SEA 941) Naval Sea Systems Command. In July 1979 he was transferred along with the management of the Underway Replenishment Improvement Program to the Deck and Replenishment Systems Division as Head of the Underway Replenishment Systems Branch (SEA 5124) the position he now holds in NA VSEA.

This paper explores the history, current trends and recent studies, experiments, and initiatives in the area of wind propulsion. The recent history of the development of sail as a means of ship propulsion is reviewed with regard to both sail and hull type. Studies and experiments are discussed such as evaluation for the U.S. Navy in 1956 of the use of ladder type hydrofoils with Marconi sails; a surface penetrating foil design, called an aerohydrofoil, developed in the early 1960s and recently successfully built and tested by its inventor; and the German Dynaship concept which uses an updated square rig sail configuration. Potential uses of sail for naval and commercial applications are presented, involving various sail forms such as air-foils, the Dynaship concept, the Flettner rotor, and Marconi rigs, and hull designs such as SWATH, Hydrofoil and Displacement. The paper also discusses some of the characteristics of wind over the world's oceans and their impact on the use of sail in naval and commercial service. The need for auxiliary fossil-fuel propulsion systems also is reviewed. An economic comparison of the cost of building and operating various sized sail-powered ships on selected routes is provided.

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE LOGICAL RECORD ACCESS APPROACH TO DATABASE DESIGN

引用

COMPUTING SURVEYS 1980年第2期12卷 179-211页

作者： TEOREY, TJ FRY, JP Electrical and Computer Engineering CICE Program The University of Michigan Ann Arbor Michigan Database Systems Research Group Graduate School of Business Administration The University of Michigan Ann Arbor Michigan

来源：评论

学校读者我要写书评

暂无评论

COMBAT SYSTEM TEST-FACTORY THROUGH SHIPBOARD

引用

NAVAL ENGINEERS JOURNAL 1980年第5期92卷 49-58页

作者： GALLAHUE, JS THE AUTHOR is the Department Manager of Combat Systems Engineering at Litton Industries. Data Systems Division. Prior to joining Litton Industries he was associated with UNIVAC. Since joining the Combat Systems Community in 1959. his assignments have included operational computer programming field engineering systems engineering equipment design proposal management test engineering. and programs management. In these varied roles he supported the NTDS R&D Program NTDS Service Test Program Interim Fleet Programming Center Pacific Anti-Submarine Warfare Ship Command and Control Systems SQS-26/NTDS/UBFCS Interface Design DD 963 Class LHA 1 Class. and the DDG 993 Class.

The required configuration management and the necessary control of the Surface Ship Combat System elements demand that they be considered as integrated and tested in accordance with an integrated test plan utilizing an integrated test organization. The sometimes used approach of implementing a combat system test program based upon the individual combat system elements being independent, has proven to be less than satisfactory. Then is no question that some of the early testing at the unit, subsystem, and subprogram levels can be planned and conducted independent of a specific “end-item” combat System. This paper addresses the planning and implementing of combat system test with the emphases being upon the integrated phase of test and primarily the lead ship of a class. Information is presented to facilitate planning and implementing a combat system test program including use of shore facilities and integrating these activities with shipboard activities; when to form the test organization and what types of expertise are required; what are the key technical management tools; the proofing of test documentation; the need for detailed “step-by-step” procedures and traceability of the specified requirements; how to assist Ships Force; planning and stat using the conduct of the tests; integrating computer program and special testing into the test program; and the significance of early decisions on administrative and contractual arrangements.

关键词：

来源：评论

学校读者我要写书评

暂无评论

INNOVATIONS IN computer-AIDED-DESIGN OF MARINE TURBINES USING INTERACTIVE GRAPHICS

引用

NAVAL ENGINEERS JOURNAL 1980年第2期92卷 207-217页

作者： GINGRICH, JK WINTER, RL Mr. John K. Gingrich joined the General Electric Company after his graduation from Lafayette College in 1948. His early assignments were with the General Engineering Laboratory and the Knolls Atomic Power Laboratory in Schenectady. N. Y. He joined the Marine Turbine and Gear Department in 1968 as Manager Engineering Administration. and assumed his present assignment as Manager Engineering Resource Planning & Administration in 1976. Mr. Gingrich was instrumental in procuring the Interactive Graphics System for the Medium Steam Department. having headed up the Study Team and is now responsible for the Interactive Graphics Systems management including new procurements. He is a member of the American Institute of Design Drafting and is currently the Chairman of the Computer-Aided Drafting Committee in that organization. Mr. Reinhold L. Winter is a graduate of the General Electric Apprentice Program and Salem State College from which he received his B.S. degree in Business Administration. He has nineteen years experience with the General Electric Company including eight years in Business Systems and Programming two years in Computer Operations Management and six years in his present position as Manager Engineering Business Systems. He was a member of the original Study Team that investigated and selected the present Applicon Interactive Graphics (IAG) equipment and currently is responsible for the management of software and hardware support for the ZAG Facility.

This paper discusses the Interactive Graphics System used by the General Electric Company, Medium Steam Turbine Department (engineering & Manufacturing) for designing, drafting, and manufacturing applications. A brief overview of the hardware malting up the system is described, followed by a more detailed description of the actual applications. Two-dimensional applications described include a Heat Balance Analysis, Flow Diagrams, and Electrical Schematics. A more fruitful area for increased productivity gains is described in the three-dimensional or mechanical applications including turbine design & layout and bucket design. coordination of the design with manufacturing for numerical control tape generation is described through CAM and Plate Frame Cutting applications. Finally, a short review of the engineering design work using Interactive Graphics is discussed. Productivity gains of 2.6 to 1 are being realized, and the overall savings to the Medium Steam Department are outlined.

关键词：

来源：评论

学校读者我要写书评

暂无评论

C-3 systems LAND-BASED TESTING

引用

NAVAL ENGINEERS JOURNAL 1980年第6期92卷 35-42页

作者： CAMPBELL, JS THE AUTHOR was born in Porterville. Calif. in 1928 and joined the U.S. Nary in 1945 in the “Aviation Midshipman” Program. He received his designation as a Naval Aviator in 1950 and flew combat missions in Korea while still a Midshipman followed by participation in various operational and training squadrons until 1958 when he completed the Naval Test Pilot School Program. After a tour as an Engineering Test Pilot. he attended the Naval Postgraduate School Monterey. Calif. and was then assigned to the Fleet Computer Programming Center as a part of the NTDS development. Later he had operational tours as CIC Officer in the USS Enterprise and as AAW Officer on the Staff of Commander Task Force SEVENTY-SEVEN in Vietnam. During an interceding tour of duty he was the Program Manager for the TACDEW Training Facilities at San Diego Calif: and Dam Neck Va. After completing his active duty in the U.S. Navy Mr. Campbell joined Logicon Inc. and during the six years with the Tactical and Training Systems Division held various positions including Project Manager Department Head Assistant Director and Division Director prior to leaving in 1976 to join the Assistant Secretary of the Nary for R&D as Special Assistant for Weapons Systems Integration. In 1978 he joined the Staff at the Naval Ocean Systems Center as Associate Director for Command Control and Communications and Acting Head of the C3I Systems Department where he is charged with the development and operation of the C3Systems Integration Test and Evaluation Laboratory.

The increasingly important role of land-based test sites (LBTSs) in military command, control, and communications (C 3 ) is discussed, with particular reference to system integration, R&D, and testing. The LBTS at the Naval Ocean systems Center (NOSC), San Diego, is described in detail, and lessons learned from the operation of the and other LBTSe are considered in terms of both their tactical and strategic implications.

关键词：

来源：评论

学校读者我要写书评

暂无评论

JTIDS AIRBORNE ADAPTIVE ARRAY ANTENNA

引用

NAVAL ENGINEERS JOURNAL 1980年第3期92卷 119-128页

作者： COLEMAN, EW HEFFNER, WH Mr. Ernest W. Coleman is a Project Engineer in the Microwave Technology Branch Radar Division Sensors & Avionics Technology Directorate. of the Naval Air Development Center (NADC). Warminster. Pa. He began his professional career at NADC in 1971 after receiving his B.S. degree in Electrical Engineering from the Tennessee Technological University. He has held several engineering positions in the areas of Design. Development. Simulation and Test & Evaluation of both antenna systems and avionics systems. He did his graduate study in Electromagnetics at Ohio State University and has authored several technical papers and numerous reports. Currently. he is Project Engineer for the development of an Adaptive Array Antenna to be used with future communication systems such as JTIDS. Mr. W. Herbert Heffner Jr. is Head of the Microwave Technology Branch at NADC Wurminster. Pa. He received his B.S. degree in Electrical Engineering from Drexel University in 1962. and since then has held several design and development engineering positions at NADC and in the Naval Material Command. He attended Ohio State University during 1964 and 1965 receiving his M.S. degree in Electrical Engineering upon completion of his studies. For the past fourteen years he has been involved in the analysis. design development. and evaluation of aircraft antenna systems. radonies. and radar cross-section reduction techniques. In 1976. he was temporarily assigned as Program Element Administrator Surface and Aerospace Target Surveillance. under the Deputy Chief of Naval Material for Development. Naval Material Command. In his four years since returning to NADC. his responsibilities have included developing antennas for future Electronic Warfare and Communication Electronic Counter-Countermeasure applications as well as digital computer antenna analysis techniques and radar camouflage of tactical aircraft.

The Navy is developing an airborne adaptive array antenna for the Joint Tactical Information Distribution System (JTIDS). JTIDS is a Tri-Service multi-channel, multi-function system to provide an advanced communication, navigation, and identification (CNI) capability for a wide variety of uses. JTIDS terminals perform multiple digital voice/data functions and relative navigation as well as the standard TACAN and IFF transponder functions. The system uses a low-duty cycle, spread-spectrum waveform and advanced coding techniques to provide secure, jam-resistant, and low probability of exploitation CNI functions. Among the important factors which determine the ultimate utility of a JTIDS terminal is the performance of the antenna system. Inadequate antenna performance could seriously degrade and possibly even negate the primary platform mission. Recent advances in antenna and data processing techndogiea promise to provide JTIDS with adequate gain and pattern coverage as well as substantial AJ (Anti-Jam) margin to complement JTIDS signal processing. The desired improvement in AJ protection can be achieved by capitalizing on the spatial filtering properties of adaptive array antennas. This paper presents the “trade-offs” which must be addressed in the design of an adaptive array antenna for airborne JTIDS terminals and the design philosophy currently in development by the Navy.

关键词：

来源：评论

学校读者我要写书评

暂无评论

computer AIDS FOR SHIP DESIGN, INTEGRATION AND CONTROL

引用

NAVAL ENGINEERS JOURNAL 1980年第2期92卷 73-87页

作者： CARLSON, CM JOHNSON, RA HELMING, FW Mr. Craig M. Carlson received his B.S. degree in Naval Architecture and Marine Engineering from the University of Michigan in 1970 and began his career with the Department of the Navy at the Naval Ship Engineering Center (NAVSEC). In 1972. he returned to the University of Michigan under the NAVSEC Long Term Training Program and received his M.S. degree in Naval Architecture and Marine Engineering. After returning to the Ship Arrangements Branch at NAVSEC. he was assigned as Task Leader for General Arrangements for the PGG PCG PHM. and MCM ship designs and was awarded Outstanding Performance Awards in 1974 and 1975. In addition he was Manager of the Arrangement Subsystem of the Navy's Computer-Aided Ship Design and Construction Program (CASDAC). In October 1979. he became Manager of the CASDAC Hull Design System. Currently. he also is enrolled in the M.S. of Computer Science Program at Johns Hopkins University. Mr. Carlson previously has presented technical papers at ASNE Day 1974 and 1978 as well as at the 1979 DOD Manufacturing Technology Advisory Group Conference. Besides ASNE. which he joined in 1972. he is a member of SNAME. ASE. and the U.S. Naval Institute. Mr. Robert A. Johnson is a Naval Architect in Surface Combatants Design (SEA 03D3). Ship Design Integration Directorate Naval Sea Systems Command. He received an Associate in Engineering degree in Drafting and Design Technology in 1959. his B.S. degree in Aerospace Engineering in 1965. and his M.S. degree in Engineering Mechanics in 1970. all from the Pennsylvania State University. In 1973. he was selected for the NA VSEC Hull Division s Long Term Training Program at the University of Michigan subsequently receiving his M.S.E. degree in Naval Architecture in 1974. Mr. Johnson began his career with the Ordnance Research Laboratory at Pennsylvania State University in 1959 where he worked. on the design of hydroelastic submarine models and conducted research in the area of flow induced structural vibrations. In 1967 he joined HRB-Singer at State Colle

This paper presents an integrated approach to computer-Aided Ship Design for U.S. Navy preliminary and contract design. An integrated Hull Design System (HDS), currently under development by the Hull Group of the Naval Sea systems Command (NAVSEA 32). is the vehicle for the discussion. This paper is directed toward practicing ship design professionals and the managers of the ship design process. Primary emphasis of this paper, and of the development effort currently under way, is on aiding ship design professionals in their work. Focus is on integration and management control of the extremely complex set of processes which make up naval ship design. The terminology of the Ship Designer and Design Manager is used. The reader needs no familiarity with the technologies of computer science.

关键词：

来源：评论

学校读者我要写书评

暂无评论

TECHNOLOGICAL ADVANCES IN AIRCRAFT CARRIER DESIGN

引用

NAVAL ENGINEERS JOURNAL 1980年第5期92卷 71-85页

作者： REIN, RJ RYAN, JC USN (RET.) Cdr. Robert J. Rein USN (Ret.)currently is the Director of Naval Support Systems for the Columbia Research Corporation Washington D. C. At the time this paper was presented he was on active duty in the U.S. Navy serving as the Ship Design Manager for the CVV Naval Sea Systems Command. Prior to that his duty assignments included Deputy Program Manager for the Sea Control Ship Assistant Ship Material Officer. Staff of Commander Naval Air Force U.S. Pacific Fleet and Type Desk Officer for Cruisers/Destroyers and New Construction (CG 30) at the former Hunter's Point Naval Shipyard. He is a graduate of General Motors Institute an accredited private college sponsored by the General Motors Corporation: the U.S. Naval Postgraduate School Monterey. Calif.: and the Defense Systems Management College. Fort Belvoir. Va. Additionally. he has had extensive postgraduate study in Systems Management at The George Washington University. Cdr. Rein is extremely active in his support of professional engineering societies and as a member of ASNE since 1964 has been responsible for the founding of ASNE Local Sections on the west coast and presently is serving as the Society's National Assistant Secretary-Treasurer. In addition he also was the creator and coordinator for the highly successful. Society sponsored Symposium “Aircraft Carriers — Present and Future.”which was held in October 1976 at the U.S. Grant Hotel. San Diego. Calif. and was the first such Symposium jointly sponsored by an Operating Fleet command and a professional society. Mr. J. Christopher Ryanreceived his B.S. degree in Naval Architecture and Marine Engineering from Webb Institute of Naval Architecture in 1967 and his M.S. degree in Naval Architecture from Massachusetts Institute of Technology in 1969. His initial work experience was at Litton Ship Systems where he was associated primarily with the general arrangements development of the DD 963 Class design. Subsequently. he was employed at the former Naval Ship Engineering Center with work as

Since the signing of the Contract Design Plane for the CVN 68 (the U.S. Navy's latest Class of Aircraft Carriers) In 1963, considerable technological advances have been made in Naval Ship Design. This paper provides specific examples of how new technology has affected traditional Carrier design practices and techniques, and also indicates areas where future advanced technology will be needed. It is divided into four sections: 1) computer Design Application; 2) Total Ship Energy Conservation Analysis; 3) Advances in Structural Design; and 4) Impact of V/STOL Aircraft. The increased use of the computer to define ship characteristics in the initial stage of ship design is discussed, followed by a report on efforts to include energy conservation as an integral part of the design process. The energy conservation approach uses traditional analytical techniques to develop innovative design configurations that will achieve energy savings. Of the many advances in Carrier structural design, two specific examples are given: 1) Elimination of the infamous “knee-knockers” (high sills in passageway openings) common to Gallery Deck structure, and 2) Successful attempts at reducing the thickness of aircraft elevator platforms. The paper concludes by pointing out some possible challenges facing the ship designer and some of the technology already created by the expected introduction of advanced design Vertical/Short Takeoff and Landing (V/STOL) aircraft.

关键词：

来源：评论

学校读者我要写书评

暂无评论

CENTML CONTROL SYSTEM TRAINING THROUGH STA TIC AND DYNAMIC SIMULATION

引用

Naval Engineers Journal 1980年第2期92卷 196-206页

作者： HALL, EDWIN E. MOSS, DONALD G. NORRIS, CLIFFORD S. PETERSON, HAROLD D. Mr. Edwin E. Hall received his Bachelor's degree in Electronics from Oklahoma City University. He also is a certified College-Level Instructor in the state of Florida and has done graduate work in Computer Science at the University of Florida. As the Technical Publications and Training Manager Simulation and Control Systems Department. General Electric Company Daytona Beach Fla. he currently is responsible for the costing. planning performance scheduling and timely completion of the Department's Technical Manuals and Technical Training Programs. These Training and Manual contracts cover Ship Systems Programs. Simulation Programs. and Communications Programs for the Armed Services and commercial customers. Mr. Hall has over twenty-years experience as a Technical Writer and Instructor and for the past seventeen years has been at the General Electric Company's Daytona Beach Facility. His experience ranges from teaching Basic Electronics and Radar Circuitry as a civilian instructor for the U.S. Army to writing Manuals Proposals Reports Specifications and Brochures for General Electric's product lines. Mr. Donald G. MOSS is a graduate of Kansas State University from which he received both his B.S. degree in Business Administration and his M.S. degree in Electrical Engineering. He is presently a Senior Systems Engineer for Control Systems in the Simulation and Control Systems Department at the General Electric Company's Daytona Beach Facility. He has been employed by General Electric for 23 years — the first seven as an Engineer and Program Manager on the Fire Control Systems for the Fleet Ballistics Missile Program the next six managing the design of control and checkout equipment on the APOLLO Program and the last ten years working on control equipment for the machinery plants of new Navy ships. Over the span of years at General Electric he has worked on propulsion control for the DD-963 propulsion electric plant and auxiliary control for the FFG-7: propulsion boiler burner electric auxiliary and car

Dynamic Simulation is defined as the hardware and software required to present to the student operator visual and audible cues and responses that are the same as those encountered when operating the Control Consoles aborad ship. This type of simulation is considered essential to the development of operator skills for critical tasks. Less critical tasks can be practiced using static simulation devices. This paper discusses the utilization of these types of training devices to train Navy crews. An overview of the Machinery Control systems of the FFG 7 and AO 177 Class ships is discussed to provide an understanding of state‐of‐the‐art equipment development. The training programs for these two ship Classes are then reviewed to show how simulation devices are currently used by the Training Community, and this is followed by a brief discussion of the additional benefits that also are derived. © 1980 by the American Society of Naval Engineers, Inc.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：