检索结果-内蒙古大学图书馆

Unsaturated Strength of Tage Tuff and Its Water Retention Drying Curve

Zairyo/Journal of the Society of Materials Science, Japan 2024年第3期73卷 212-219页

作者： Kotabe, Haruhiko Togashi, Yota Hatakeyama, Ken Osada, Masahiko Civil and Environmental Engineering Program Graduate School of Science and Engineering Saitama University Shimo-Okubo Sakura-ku Saitama338-8570 Japan Integrated Technical Support Center Research Organization Saitama University Shimo-Okubo Sakura-ku Saitama338-8570 Japan

Strength loss of sedimentary rocks due to water content changes is an important issue in the civil engineering field. Assuming disasters associated with rainfall and drying, it is important to identify unsaturated strength properties for gradually varying moisture contents. Water retention curves are needed to describe unsaturated strength properties. The high suction acting in the case of rock presents a challenge in identifying the suction. In particular, identifying the water retention drying path is difficult. This study propose a method to identify the drying paths using uniaxial compressive strength and tensile strength of Brazilian test. Uniaxial compression and Brazilian tests were performed on specimens with varying water content in the drying pass to investigate changes in their mechanical properties. Strength and stiffness were found to be approximately halved in the wet condition compared to the dry condition. Simplified Mohr-Coulomb failure criteria are also identified using uniaxial compressive and tensile strength. The cohesion decreases with increasing water content, while the angle of shear resistance is independent of changes in water content. Suction at each saturation level was back-analyzed using the detected cohesion and shear resistance angles to identify the water retention drying curve. The water retention drying curves identified were compared with the water retention wetting curve identified by another method to confirm the validity of the proposed method. ©2024 The Society of Materials Science, Japan.

关键词： Sedimentary rocks

来源：评论

学校读者我要写书评

暂无评论

Densified mixture design algorithm: A novel mix design concept and its application for green concretes incorporating industrial by-products

引用

Environmental Progress and Sustainable Energy 2023年第4期42卷 e14086-e14086页

作者： Nguyen, Tan-Hung Limongan, Andrian H. Nguyen, May Huu Hwang, Chao-Lung Huynh, Trong-Phuoc Department of Civil Engineering Can Tho University of Technology Can Tho Viet Nam Department of Civil and Construction Engineering National Taiwan University of Science and Technology Taipei Taiwan Department of Bridge and Tunnel Faculty of Civil Engineering University of Transport Technology Hanoi Viet Nam Civil and Environmental Engineering Program Graduate School of Advanced Science and Engineering Hiroshima University Hiroshima Japan Taiwan Building Technology Center National Taiwan University of Science and Technology Taipei Taiwan Faculty of Civil Engineering College of Engineering Can Tho University Can Tho Viet Nam

Despite the fact that densified mixture design algorithm (DMDA) has been identified as a promising tool for green concrete mix design, its use in real practice has still been minimal worldwide. Due to the lack of precise information on DMDA computation in earlier studies, this work proposes DMDA including fly ash and ground granulated blast-furnace slag as a viable way to improve the long-term performance of green concrete. To encourage the use of DMDA, this study offers a detailed description of the DMDA mix design, as well as a step-by-step standard operating procedure and an empirical example of the computation. Assessments of the long-term performance of green mixtures (self-consolidating concrete and high-performance concrete) and ordinary Portland cement concrete (designed using the conventional method of American Concrete Institute, ACI) were made. Performances of the ACI (O6000 mixture) and DMDA concretes (S6000 and H6000 mixtures) were then compared in terms of compressive strength, elastic modulus, shrinkage, and creep strain. As a result, all of the concrete samples attained the target strength of above 41 MPa (6000 psi) after only 28 days. Moreover, compressive strength, elastic modulus, shrinkage, and creep strain increased significantly in all of the concretes over curing time. Importantly, the experimental results confirmed that both types of DMDA concrete exhibited higher compressive strength and better long-term performance than the ACI concrete under elastic modulus, creep, and shrinkage aspects. © 2023 American Institute of Chemical Engineers.

关键词： Compressive strength

来源：评论

学校读者我要写书评

暂无评论

Influence of rice husk ash and hybrid fiber on engineering properties of densified high-performance fiber-reinforced concrete

引用

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2023年第11期237卷 2845-2857页

作者： Vo, Duy-Hai Nguyen, Minh-Hieu Nguyen, May Huu Hwang, Chao-Lung Huynh, Trong-Phuoc The University of Danang University of Technology and Education Danang Viet Nam Vinh Long Department of Construction Vinh Long Viet Nam Civil and Environmental Engineering Program Graduate School of Advanced Science and Engineering Hiroshima University Hiroshima Japan Department of Bridge and Tunnel Faculty of Civil Engineering University of Transport Technology Hanoi Viet Nam Taiwan Building Technology Center National Taiwan University of Science and Technology Taipei Taiwan Faculty of Civil Engineering College of Engineering Can Tho University Can Tho Viet Nam

Conventional concrete significantly affects the environment due to high CO2 emission into the atmosphere during the production process. In order to improve concrete performance and arrest the incidence of global warming, the use of additive materials for cement replacement has been promoted worldwide. This study was designed to investigate the mechanical properties of high-performance fiber-reinforced concrete (HFRC) produced using rice husk ash (RHA) and hybrid fiber (HF) in accordance with the densified mixture design algorithm (DMDA) mix design method. Samples were produced using RHA as a direct replacement for cement at 10%, 20%, and 30%. HF, comprising steel and polypropylene fibers, was added (by volume) to the 20% RHA group mixture to improve the HFRC sample properties. Based on the experimental results, higher RHA contents had a generally negative effect on the fresh properties of the HFRC mixtures. Compressive strength values ranged from 53 to 72 MPa with various RHA and HF content. RHA replacement levels up to 20% had an insignificant effect on the strength development and dynamic modulus of the HFRC samples. However, the addition of HF improved splitting tensile strength, flexural strength, and dynamic modulus remarkably at all curing ages. Furthermore, the 91-day drying shrinkage was in the ranges of 0.032%–0.039% and 0.023%–0.034% using different RHA and HF levels, respectively. Increasing both RHA and HF contents significantly reduced drying shrinkage in the samples. Multivariable regression was also performed, clarifying that all tested results were consistent and had good correlations. The results of this study also provide a potentially effective use for abundantly available industrial waste products such as fly ash (FA) and RHA to promote the production of greener and more sustainable concrete. © IMechE 2023.

关键词： Bending strength

来源：评论

学校读者我要写书评

暂无评论

THE SILT FENCE: KEEPING SEDIMENT WHERE IT BELONGS

引用

Public Roads 2023年第2期87卷 8-11页

作者： Whitman, J. Blake Perez, Michael A. Smith, Brian L. Middle Tennessee State University The School of Concrete and Construction Management Auburn University ALDOT The Department of Civil and Environmental Engineering Auburn University Construction and Stormwater Management and Oversees the Research Program AU-SRF The FHWA Resource Center Office of Innovation Implementation Illinois State University Northern Illinois University

Managing stormwater to protect the Nation’s waters is a common challenge of highway construction sites. Most water quality problems in lakes and rivers are the result, in part, of stormwater runoff. Typically, grading and earth-disturbing activities during construction require removal of vegetation that dissipates raindrop energy and filters and controls stormwater pollution.

关键词： Grading

来源：评论

学校读者我要写书评

暂无评论

Integration of Small Unmanned Aircraft Systems and Deep Learning for Efficient Airfield Pavement Crack Detection and Assessment

Integration of Small Unmanned Aircraft Systems and Deep Lear...

引用

International Conference on Transportation and Development 2024: Transportation Safety and Emerging Technologies, ICTD 2024

作者： All Sourav, Md Abdullah Ceylan, Halil Kim, Sunghwan Brynick, Matthew Dept. of Civil Construction and Environmental Engineering Iowa State Univ. AmesIA United States Dept. of Civil Construction and Environmental Engineering and Program for Sustainable Pavement Engineering and Research Iowa State Univ. AmesIA United States Program for Sustainable Pavement Engineering and Research Institute for Transportation Iowa State Univ. AmesIA United States Federal Aviation Administration Airport Pavement R&D Section William J. Hughes Technical Center NJ United States

ISBN: (纸本)9780784485514

Airfield pavement inspection and maintenance are critical aspects of aviation infrastructure, representing a substantial portion of life-cycle costs. Longitudinal, transverse, and diagonal (LTD) cracks;corner breaks;shattered slabs in Portland cement concrete (PCC) pavement;and longitudinal and transverse (L&T) cracks of asphalt concrete (AC) pavement consist of most of the airfield pavement distresses. Traditional airfield pavement inspection methods are manual, time-consuming, laborious, and reliant on the inspector’s experience, leading to increased expenses and safety risks. This research explores the potential to automatically identify those distresses in red-green-blue images using four variants of deep learning (DL) model YOLOv8, ranging from nano to large. YOLOv8 is a widely used off-the-shelf DL object detection model that allows rapid training and easy execution. A DL training dataset of 5,273 small uncrewed aircraft systems (sUAS) collected images was developed. The transfer learning technique was used, and the dataset passed through each model 100 times for adequate training. The model exhibits mean average precision values exceeding 0.65, with varying processing times. Such accuracy showed that crack-related distress detection using DL models could enhance airfield pavement inspection efficiency. © ASCE.

关键词： Drones

来源：评论

学校读者我要写书评

暂无评论

Machine learning-based modeling of surface water temperature dynamics in arctic lakes

引用

Environmental Science and Pollution research 2024年第49期31卷 59642-59655页

作者： Kim, Hyung Il Kim, Dongkyun Salamattalab, Mohammad Milad Mahdian, Mehran Bateni, Sayed M. Noori, Roohollah DL E & amp C Civil Business Division Donuimun D Tower 134 Tongil-Ro Jongno-Gu Seoul Korea Republic of Department of Civil and Environmental Engineering Hongik University Mapo-Gu Seoul Korea Republic of School of Civil Engineering Iran University of Science and Technology Tehran Narmak*** Iran Department of Civil Environmental and Construction Engineering and Water Resources Research Center University of Hawaii at Manoa HonoluluHI United States Graduate Faculty of Environment University of Tehran Tehran*** Iran Faculty of Governance University of Tehran Tehran*** Iran UNESCO-UNISA Africa Chair in Nanoscience and Nanotechnology College of Graduate Studies University of South Africa Muckleneuk Ridge Pretoria392 South Africa

Lake surface-water temperature (LSWT) regulates physical and biochemical processes in lakes. Therefore, understanding the LSWT dynamics is important, especially in Arctic zone since the region is experiencing a warming rate that is greater than the Earth’s average. However, regular measurements of LSWT in the remote Arctic lakes always face difficulties or cannot be done by satellites accurately due to the cloud cover and their limited spatiotemporal resolution. Here, we used a historically rich data (1960–2023) to develop four machine learning-based algorithms for the daily LSWT modeling in Lake Inari, situated in Arctic zone, using the air-temperature data. Our results showed that both air-temperature (0.030 °C/yr) and LSWT (0.023m °C/yr) were warming with a rate faster than those in the globe. The long-short-term memory model, with the coefficients of determination varied from 0.96 to 0.98, outperformed other algorithms in modeling of the daily LSWT dynamics in Lake Inari, followed by both support vector regression and neural network tools, and random forest model. As the air-temperature data are widely accessible through synoptic stations and remote sensing techniques, our suggested models can be simply adopted for other Arctic lakes, where the local water-temperature data are often lacking or contain large windows of missing data due to harsh atmospheric conditions and equipment failure. Graphical abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.

关键词： Long short-term memory

来源：评论

学校读者我要写书评

暂无评论

New microbial electrosynthesis system for methane production from carbon dioxide coupled with oxidation of sulfide to sulfate

引用

Journal of Environmental Sciences 2023年第3期125卷 786-797页

作者： Hiromi Kambara Ha T.T.Dinh Shuji Matsushita Yoshiteru Aoi Tomonori Kindaichi Noriatsu Ozaki Akiyoshi Ohashi Department of Civil and Environmental Engineering Graduate School of EngineeringHiroshima University1–4–1KagamiyamaHigashi-HiroshimaHiroshima 739–8527Japan Faculty of Environment Ho Chi Minh City University of Natural Resources and Environment236 Le Van Sy1 WardTan Binh DistrictHo Chi Minh CityVietnam Agricultural Technology Research Center Hiroshima Prefectural Technology Research Institute6869HaraHachihonmatsuHigashihiroshimaHiroshima 739–0151Japan Program of Biotechnology Graduate School of Integrated Sciences for LifeHiroshima University1–3–1KagamiyamaHigashi-HiroshimaHiroshima 739–8530Japan Department of Civil and Environmental Engineering Graduate School of Advanced Science and EngineeringHiroshima University1–4–1KagamiyamaHigashi-HiroshimaHiroshima 739–8527Japan

Microbial electrosynthesis system (MES) is a promising method that can use carbon dioxide,which is a greenhouse gas,to produce methane which acts as an energy source,without using organic ***,this bioelectrical reduction reaction can proceed at a certain high applied voltage when coupled with water oxidation in the anode coated with metallic *** coupled with the oxidation of HS–to SO_(4)^(2-),methane production is thermodynamically more feasible,thus implying its production at a considerably lower applied *** this study,we demonstrated the possibility of electrotrophic methane production coupled with HS–oxidation in a cost-effective bioanode chamber in the MES without organic substrates at a low applied voltage of 0.2 *** addition,microbial community analyses of biomass enriched in the bioanode and biocathode were used to reveal the most probable pathway for methane production from HS–*** the bioanode,electroautotrophic SO_(4)^(2-)production accompanied with electron donation to the electrode is performed mainly by the following two steps:first,incomplete sulfide oxidation to sulfur cycle intermediates (SCI) is performed;then the produced SCI are disproportionated to HS^(–)and SO_(4)^(2-).In the biocathode,methane is produced mainly via H_(2)and acetate by electronaccepting syntrophic bacteria,homoacetogens,and acetoclastic ***,a new ecofriendly MES with biological H_(2)S removal is established.

关键词： Microbial electrosynthesis system Low applied voltage Organic substrates Methane production Sulfur oxidation

来源：评论

学校读者我要写书评

暂无评论

Experimental and Simulation Analysis of Rca and Para-Wood Ash as Partial Substitutes for Nca and Cement in Recycled Aggregate Concrete

SSRN

引用

SSRN 2024年

作者： Sae-Long, Worathep Chompoorat, Thanakorn Limkatanyu, Suchart Damrongwiriyanupap, Nattapong Sukontasukkul, Piti Chub-Uppakarn, Tanan Thepumong, Thanakit Civil Engineering Program School of Engineering University of Phayao Phayao56000 Thailand Department of Civil and Environmental Engineering Faculty of Engineering Prince of Songkla University Songkhla90110 Thailand Construction and Building Materials Research Center Department of Civil Engineering King Mongkut’s University of Technology North Bangkok Bangkok10800 Thailand

Recycled concrete aggregate (RCA) is widely used as an alternative recycled material in engineering, while para-wood ash (PWA) is a natural agricultural waste product. To advance sustainable construction, it is crucial to thoroughly examine their impact on concrete’s mechanical properties to ensure safety in engineering applications. This paper conducts a series of experiments on recycled aggregate concrete (RAC) with PWA to investigate these replacement effects. RCA replaces natural coarse aggregate (NCA) at 0%, 50%, and 100%, while PWA substitutes cement at 0%, 10%, and 20%. The experiments include compression tests on mortar as well as compressive, tensile, and flexural tests on RAC, along with microstructure investigations. The results indicate a decrease in strength with higher proportions of RCA and PWA. Microstructure investigations were conducted via scanning electron microscopy with energy-dispersive X-ray analysis (SEM/EDX). SEM provides micro images of the testing specimens, while EDX offers insight into their chemical compositions. The EDX results reveal a direct correlation between the Ca/Si ratio and the strengths of mortar and RAC. Correlation studies between compressive strength-replacement parameters, tensile-compressive strength, and flexural-compressive strength demonstrate that the proposed equations accurately predict the experimental data with R2 values of 0.60 (for mortar), and 0.94, 0.95, and 0.71 (for RAC), respectively. Two numerical simulations validate the proposed model and showcase potential engineering applications. Finally, a 10% replacement of PWA for cement can reduce the embodied energy value (EEV) by approximately 9.46% for mortar mixed with PWA and around 10% for RAC mixed with RCA and PWA. © 2024, The Authors. All rights reserved.

关键词： Mortar

来源：评论

学校读者我要写书评

暂无评论

Integrated 3D pore architecture design of bio-based engineered catalysts and adsorbents: preparation, chemical doping, and environmental applications

Environmental Science: Advances

引用

Environmental Science: Advances 2023年第9期2卷 1167-1188页

作者： Cuong, Dinh Viet Wu, Jhen-Cih Khan, Eakalak Du Laing, Gijs Ok, Yong Sik Hou, Chia-Hung Faculty of Environmental Engineering Hanoi University of Civil Engineering Hanoi 100000 Viet Nam Graduate Institute of Environmental Engineering National Taiwan University Taipei 10617 Taiwan Civil and Environmental Engineering and Construction Department University of Nevada Las Vegas NV United States Department of Green Chemistry and Technology Ghent University Ghent Belgium Korea Biochar Research Center APRU Sustainable Waste Management & Division of Environmental Science and Ecological Engineering Korea University Seoul 02841 South Korea International ESG Association (IESGA) Seoul 06621 South Korea Research Center for Future Earth National Taiwan University No. 1 Sec. 4. Roosevelt Rd. Taipei 10617 Taiwan

An integrated strategy combining 3D architecture design and chemical doping holds great promise for enhancing the performance of bio-based engineered carbon materials in environmental applications. This review paper critically examines the use of integrated hierarchical porous carbon derived from biomass (bio-based IHPC) as an engineered catalyst and adsorbent for environmental purposes. The hierarchically interconnected pore architectures can reduce the electrical resistance and shorten the diffusion pathway, which is beneficial for the transport of ions/molecules. Additionally, the high pore volume, large specific surface area, and abundant active sites contribute to the high capacity for ion and molecule capture. The bio-based IHPC with 3D interconnected hierarchical porous structures can be obtained through non-templating, hard-templating and self-templating strategies. Chemical doping can further create functional groups and active sites on the bio-based IHPC surface, resulting in an abundance of reaction and interaction with pollutants. In particular, the surface properties of bio-based IHPCs can be further modified by heteroatom doping or metal (hydr)oxide coating. The review demonstrates the efficiency of bio-based IHPC as an engineered catalyst and adsorbent in various environmental applications. These applications include the removal of toxic trace elements and organic pollutants, carbon capture, enhancement of anaerobic digestion processes, antimicrobial treatment, and oil-water separation. The paper thoroughly discusses the influence mechanisms of pore architectures and chemical doping on the performance of bio-based IHPC in these applications. Finally, the paper concludes by presenting promising research directions for the preparation and application of bio-based IHPC. © 2023 RSC.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Production of 5-hydroxymethylfurfural from fructose via inherent catalytic properties of a biphasic system without external catalyst addition

引用

Green Chemistry 2023年第3期26卷 1533-1541页

作者： Huynh, Quang Tam Padilla, Alexander F. de Luna, Mark Daniel G. Huang, Po-Jung Chen, Pei-Shih Saidina Amin, Nor Aishah Chen, Ku-Fan Chang, Ken-Lin Institute of Environmental Engineering National Sun Yat-Sen University Kaohsiung804 Taiwan Energy Engineering Program National Graduate School of Engineering University of the Philippines Diliman Quezon City1101 Philippines Department of Chemical and Materials Engineering National Central University Taoyuan320317 Taiwan Department of Public Health College of Health Sciences Kaohsiung Medical University Kaohsiung Taiwan Johor Bahru Skudai81310 Malaysia Department of Civil Engineering National Chi Nan University Nantou545 Taiwan Net Zero Emissions and Resource Recycling Technology Research Center National Sun Yat-Sen University Kaohsiung804 Taiwan

5-Hydroxymethylfurfural (5-HMF) is the key to unlocking the potential of biomass materials to transform into fuels, materials, and chemicals. In this study, an effective biphasic reaction system composed of a reaction phase (aqueous phase) and an extraction phase (organic phase) was used for the conversion of fructose to 5-HMF. Deep eutectic solvents (DESs) composed of different hydrogen bond donors and hydrogen bond acceptors, the ionic liquid [BMIM]Cl, aqueous choline chloride, aqueous betaine hydrochloride, and ethylamine hydrochloride were used as the reaction phase, and different organic solvents, such as methyl isobutyl ketone (MIBK), dimethyl sulfoxide (DMSO), toluene, ethyl butyrate, and gamma-valerolactone (GVL), were used as the organic phase. Experiments were conducted under optimal conditions simulated using the reaction surface method to obtain the maximum 5-HMF yield. The highest yields of 5-HMF obtained in reactions with DESs were 67.86%, 68.69%, and 71.40% for ChCl : OA, ChCl : Lac, and EaCl : Lac, respectively. However, adding dimethyl sulfoxide and betaine hydrochloride aqueous solution to the fructose conversion system resulted in a maximum yield of 90.42% ± 1.46% of 5-HMF without the use of catalysts. This study also demonstrated that betaine hydrochloride could be effectively reused four times. A 5-HMF yield of at least 80% indicates a green process suited towards sustainable development. © 2024 The Royal Society of Chemistry.

关键词： Fructose

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：