检索结果-内蒙古大学图书馆

Robust design of sliding mode control for airship trajectory tracking with uncertainty and disturbance estimation

Journal of systems engineering and Electronics 2024年第1期35卷 242-258页

作者： WASIM Muhammad ALI Ahsan CHOUDHRY Mohammad Ahmad SHAIKH Inam Ul Hasan SALEEM Faisal Department of Aeronautics and Astronautics Engineering Institute of Space TechnologyIslamabad 44000Pakistan Department of Electrical Engineering University of Engineering and TechnologyTaxila 47080Pakistan Department of Measurements and Control Systems Silesian University of TechnologyGliwice 44-101Poland The Joint Doctoral School Silesian University of TechnologyGliwice 44-100Poland

The robotic airship can provide a promising aerostatic platform for many potential *** applications require a precise autonomous trajectory tracking control for *** has a nonlinear and uncertain *** is prone to wind disturbances that offer a challenge for a trajectory tracking control *** paper addresses the airship trajectory tracking problem having time varying reference path.A lumped parameter estimation approach under model uncertainties and wind disturbances is opted against distributed *** uses extended Kalman filter(EKF)for uncertainty and disturbance *** estimated parameters are used by sliding mode controller(SMC)for ultimate control of airship trajectory *** comprehensive algorithm,EKF based SMC(ESMC),is used as a robust solution to track airship *** proposed estimator provides the estimates of wind disturbances as well as model uncertainty due to the mass matrix variations and aerodynamic model *** stability and convergence of the proposed method are investigated using the Lyapunov stability *** simulation results show that the proposed method efficiently tracks the desired *** method solves the stability,convergence,and chattering problem of SMC under model uncertainties and wind disturbances.

关键词： airship chattering extended Kalman filter(EKF) model uncertainties estimation sliding mode controller(SMC)

来源：评论

学校读者我要写书评

暂无评论

Circularity Reinforcement of Critical Raw Materials in Europe: A Case of Niobium

引用

Circular Economy and Sustainability 2024年第4期4卷 2449-2472页

作者： von Rennenberg, Theresa Yu, Yifei Fraccascia, Luca Yazan, Devrim Murat Department of Industrial Engineering and Business Information Systems University of Twente Drienerlolaan 5 Enschede 7522 NB Netherlands Department of Computer Control and Management Engineering Sapienza University of Rome Via Ariosto 25 Rome 00185 Italy

Critical Raw Materials attract increasing attention due to their depleting reserves and low recyclability. Niobium, one of the most rare and vital elements, is primarily found in Brazil. This research explores the potential impact of Circular Economy (CE) strategies on mitigating niobium's criticality within Europe. First, a niobium supply chain is designed and analysed by Enterprise Input–Output modelling. Second, the supply risk is calculated based on the criticality matrix proposed by the European Commission under three scenarios associated with resources, technologies, and policies. The results show that urban mining is a potential solution to reduce niobium’s criticality and mitigate its environmental impacts. A higher recycling input rate and/or a mix of recycling and substitution strategies is necessary to offset niobium’s criticality. Aligned with the CE action plan, the research offers a scientific foundation to strategically prevent the risk of niobium supply shortages. © The Author(s) 2024.

关键词： Circular economy Critical raw materials Enterprise input–output Niobium supply chain Scenario analysis

来源：评论

学校读者我要写书评

暂无评论

Operation Optimization of Integrated Energy System Considering Demand Response and Carbon Trading 6

Operation Optimization of Integrated Energy System Consideri...

引用

6th International Conference on Power and Energy Technology, ICPET 2024

作者： Fan, Ruizhe Li, Xuecheng Li, Jun School of Electrical and Control Engineering North China University of Technology Beijing China Department of Automatic Control and Complex Systems University of Duisburg-Essen Duisburg Germany

ISBN: (纸本)9798350375855

Integrated energy system is a useful tool for achieving the"dual-carbon"goal. In order to explore the demand-side adjustable potential of the comprehensive energy system for lowering carbon emissions, this paper proposes an optimal operation model that accounts for demand response under a carbon trading mechanism. Initially, the demand response is classified into two categories based on the characteristics of the load response. Additionally, a carbon trading mechanism is built for the integrated energy system by allocating the carbon emission quotas for the system using the baseline technique, which is free of charge. The actual carbon emissions from the gas turbine and gas boiler are also taken into account. Ultimately, a low-carbon optimization operation model of the integrated energy system is established, with the goal of minimizing the total cost of energy purchase, carbon trading, and operation and maintenance. The suggested model's validity is then confirmed through four types of typical scenarios. © 2024 IEEE.

关键词： Demand response

来源：评论

学校读者我要写书评

暂无评论

Frequency Domain Auto-tuning of Structured LPV controllers for High-Precision Motion control 63

Frequency Domain Auto-tuning of Structured LPV Controllers f...

引用

63rd IEEE Conference on Decision and control, CDC 2024

作者： Broens, Yorick Butler, Hans Toth, Roland Asml Veldhoven Netherlands Eindhoven University of Technology Department of Electrical Engineering Eindhoven Netherlands Hunren Institute for Computer Science and Control Systems and Control Laboratory Hungary

ISBN: (纸本)9798350316339

Motion systems are a vital part of many industrial processes. However, meeting the increasingly stringent demands of these systems, especially concerning precision and throughput, requires novel control design methods that can go beyond the capabilities of traditional solutions. Traditional control methods often struggle with the complexity and position-dependent effects inherent in modern motion systems, leading to compromises in performance and a laborious task of controller design. This paper addresses these challenges by introducing a novel structured feedback control auto-tuning approach for multiple-input multiple-output (MIMO) motion systems. By leveraging frequency response function (FRF) estimates and the linear-parameter-varying (LPV) control framework, the proposed approach automates the controller design, while providing local stability and performance guarantees. Key innovations include norm-based magnitude optimization of the sensitivity functions, an automated stability check through a novel extended factorized Nyquist criterion, a modular structured MIMO LPV controller parameterization, and a controller discretization approach which preserves the continuous-time (CT) controller parameterization. The proposed approach is validated through experiments using a state-of-the-art moving-magnet planar actuator prototype. © 2024 IEEE.

关键词： Continuous time systems

来源：评论

学校读者我要写书评

暂无评论

Assessment of the Digital Measuring Transformers Application in Power Distribution Zone

Assessment of the Digital Measuring Transformers Application...

引用

2024 International Russian Automation Conference, RusAutoCon 2024

作者： Filatova, Galina Lebedev, Vladimir Tolstoukhov, Andrey Ivanovo State Power Engineering University Automatic control of electric power systems department Ivanovo Russia

Combined digital measuring current and voltage transformers (DCVTs), developed at Ivanovo State Power engineering University (ISPEU), are innovative products. The researchers have accumulated some operating experience of devices in existing electrical installations and experience in numerous laboratory tests. At the same time, a number of aspects of the DCVT use still remain the subject of research, for example, the functioning of DCVTs as a primary sensor for protection against single-phase ground faults (SPGFs). It is also necessary to evaluate the effect of the introduction of DCVTs in the overhead networks of power distribution zones (PDZs), primarily from the point of view of reducing the costs of searching for the location of the SPGFs. The procedure for searching for an electrical fault using the functions built into DCVT 6 -10 kV is described. The article describes the effects of the introduction of DCVTs in 6-10 kV distribution zones, and also provides criteria that allow us to assess in which cases the use of DCVTs and technologies based on them will be most beneficial. © 2024 IEEE.

关键词： Distribution transformers

来源：评论

学校读者我要写书评

暂无评论

Real-Time Intrusion Detection Based on Decision Fusion in Industrial control systems

IEEE Transactions on Industrial Cyber-Physical Systems

引用

IEEE Transactions on Industrial Cyber-Physical systems 2024年 2卷 143-153页

作者： Xue, Yawen Pan, Jie Geng, Yangyang Yang, Zeyu Liu, Mengxiang Deng, Ruilong Information Engineering University Zhengzhou450001 China Singapore University of Technology and Design ITrust 487372 Singapore The University of Sheffield Department of Automatic Control and Systems Engineering SheffieldS10 2TN United Kingdom Zhejiang University State Key Laboratory of Industrial Control Technology The College of Control Science and Engineering Hangzhou310027 China Huzhou Institute of Industrial Control Technology Huzhou313000 China

Industrial control systems (ICSs) are becoming increasingly interconnected as the rapid convergence of information technology (IT) and operation technology (OT) networks, and meanwhile massive attack surfaces have been exposed. However, traditional intrusion detection systems (IDSs) are difficult to be directly deployed in ICSs due to the hard real-time requirement and rare patching chance. Besides, the design of effective and practical IDSs is hampered by the lack of benchmarking ICS cybersecurity datasets. To bridge the gaps, this paper makes the first attempt by open-sourcing the developed ICS cybersecurity datasets and proposing a decision fusion based real-time IDS. Firstly, we design a customized cybersecurity dataset in a full-hardware and high-fidelity platform, including 7 types of cyber threats tailored for ICSs. The collected dataset includes network traffic, sensor readings, actuator status, and system parameters, providing the state-of-the-art benchmark dataset for ICSs consisting of cross-layer characteristics. Furthermore, we design an online decision fusion-based IDS by strategically integrating 4 widely-used machine learning models. The proposed IDS is deployed on a real-time running ethanol distillation, surpassing the performance of single detection models in terms of precision and F1-score, which substantially enhances intrusion detection accuracy and cybersecurity of ICS. © 2023 IEEE.

关键词： Intrusion detection

来源：评论

学校读者我要写书评

暂无评论

Improving Power Response of Single-controllable VSG-Based Active Distribution Network

引用

CSEE Journal of Power and Energy systems 2025年第1期11卷 102-114页

作者： Shah Fahad Arman Goudarzi Pierluigi Siano Ji Xiang Department of Electrical and Computer Engineering Missouri University of Science and TechnologyUSA University of Victoria Canada Department of Management&Innovation Systems University of SalernoItaly Department of Electrical and Electronic Engineering Science University of JohannesburgJohannesburg2006South Africa National Laboratory of Industrial Control Technology College of Electrical EngineeringZhejiang UniversityHangzhou310058China

controlling an active distribution network(ADN)from a single PCC has been advantageous for improving the performance of coordinated Intermittent RESs(IRESs).Recent studies have proposed a constant PQ regulation approach at the PCC of ADNs using coordination of non-MPPT based ***,due to the intermittent nature of DGs coupled with PCC through uni-directional broadcast communication,the PCC becomes vulnerable to transient *** address this challenge,this study first presents a detailed mathematical model of an ADN from the perspective of PCC regulation to realize rigidness of PCC against ***,an H_(∞)controller is formulated and employed to achieve optimal performance against disturbances,consequently,ensuring the least oscillations during transients at ***,an eigenvalue analysis is presented to analyze convergence speed limitations of the newly derived system ***,simulation results show the proposed method offers superior performance as compared to the state-of-the-art methods.

关键词： Cooperative control of DGs hierarchical control system high penetration of intermittent RESs H_(∞)control optimal control in power systems single-controllable active distribution networks

来源：评论

学校读者我要写书评

暂无评论

The Influence of Electromagnetic Absorber Thickness on the Characteristics of the Filter based on Coupled Transmission Line 3

The Influence of Electromagnetic Absorber Thickness on the C...

引用

3rd IEEE International Conference on Problems of Informatics, Electronics and Radio engineering, PIERE 2024

作者： Trubcheninov, Vyacheslav A. Vlasov, Sergey V. Zhechev, Yevgeniy S. Tomsk State University of Control Systems and Radioelectronics Department of Microwave and Quantum Radio Engineering Tomsk Russia

ISBN: (纸本)9798331516321

The study investigated the influence of electromagnetic absorber (EA) thickness on the time and frequency characteristics of a two-conductor microstrip transmission line (TL). The structure with EA applied as a coating for signal conductors on the outer sides was examined. The modeling, conducted using COMSOL Multiphysics software, analyzed parameters such as signal arrival time, interference amplitude at the output, cutoff frequency, and transmission and reflection coefficients. The EA thickness varied from 0 to 1000 μm in 200 μm increments. The results showed that at an EA thickness of 400 μm, effective suppression of ultra-wideband interference was achieved, with the interference arrival time increasing by 1.41 times and the interference amplitude decreasing by 2.8 times. At this thickness, the interference amplitude at the output decreased from 0.125 V to 0.035 V, the signal arrival time increased from 1.4 ns to 1.973 ns, and the cutoff frequency decreased from 3.1 GHz to 0.05 GHz. It was also found that further increasing the EA thickness did not lead to significant improvements in characteristics, indicating the need to optimize the use of materials based on their effective thickness. The practical significance of this work lies in the potential to improve the electromagnetic compatibility (EMC) of electronic equipment through the application of optimal EA thickness, enhancing resistance to ultra-wideband interference without significant changes to the device's design. © 2024 IEEE.

关键词： Computer resource management

来源：评论

学校读者我要写书评

暂无评论

Design and Implementation of Safety Functions for the CNC Milling Machine 15

Design and Implementation of Safety Functions for the CNC Mi...

引用

15th International Conference Elektro, ELEKTRO 2024

作者： Brtis, Jozef Zdansky, Juraj Pirnik, Rastislav University of Žilina Faculty of Electrical Engineering and Information Technology Department of Control and Information Systems Žilina Slovakia

ISBN: (纸本)9798350372359

The paper deals with the design and implementation of safety functions for a CNC milling machine. It is a relatively small CNC milling machine that does not pose a great danger to trained persons. Because it is used in areas where even untrained persons can come into contact with it, it was necessary to implement a safety system that implements safety functions preventing accidents when entering the dangerous zone of the CNC milling machine. The safety system is implemented based on a safety PLC and the sensors are designed using a two-channel architecture to meet the required SIL (safety integrity level). © 2024 IEEE.

关键词： Security systems

来源：评论

学校读者我要写书评

暂无评论

Ensuring Correct Relay Protection Functioning in Transient Modes With Saturation of Current Transformers 7

Ensuring Correct Relay Protection Functioning in Transient M...

引用

7th International Scientific and Technical Conference Relay Protection and Automation, RPA 2024

作者： Panashchatenko, A.V. Yablokov, A.A. Department of Electric Power Systems Automatic Control Ivanovo State Power Engineering University Ivanovo Russia

ISBN: (纸本)9798331501105

Electromagnetic current transformers, invented more than 100 years ago, are today the most widespread type of preliminary current converters, used in organizing metrological channels for commercial and technical electricity metering, measuring and relay protection systems. Despite their relatively simple design and modest price, today the question of using unconventional preliminary current converters (Rogowski coils, optical transformers, galvanic-magnetic sensors) is being increasingly raised [1]. This situation is due to the shortcomings of electromagnetic current transformers (CT): large weight and dimensions), explosion and fire hazard, and also saturation of their magnetic conductor in transient modes with the presence of an aperiodic component in short circuiting (SC) current. The phenomenon of saturation leads to significant distortion of the transmitted secondary signal, which in turn may become the cause of overprotection with external SC or delayed protection with internal SC. Russian and international practice in coordinating CT characteristics and relay protection requirements presuppose ensuring correct operation of relay protection systems not only in steady, but also in transient modes with possible saturation of CT magnetic conductors [2]-[5]. At present, testing the correct operation of relay protection and automation devices (RPAD) in transient modes is carried out using the CT saturation time, which under the specific conditions of the location of the CT should be more than the exact current conversion time required for correct operation of the connected RPAD. This time is calculated by special approved methods [2]. Such use of two extreme CT magnetic conductor conditions (saturated/unsaturated), without regard to the current waveform itself may lead to significant inaccuracies in evaluating the correctness of RPAD operation. Fig 1 shows two instances of saturation in one and the same CT in different operating conditions and with the same time be

关键词： Relay protection

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：