作者:
CHITRE, DMSHYY, DJEPHREMIDES, AGUPTA, SCOMSAT Laboratories
22300 Comsat Drive Clarksburg MD 20871–9475 USA. Received his B.Sc. from the University of Bombay
India an M.A. in mathematics from the University of Cambridge
U.K. and a Ph.D. in physics from the University of Maryland. He is currently an Associate Executive Director of the Network Technology Division at COMSAT Laboratories. He has been involved in research and development activities in ISDN
VSAT networks data communications and network systems and architectures. Prior to his current positions Dr. Chitre was a Principal Scientist in the Network Technology Division at COMSAT Laboratories. Dr. Chitre joined COMSAT Laboratories in 1980. He has made major contributions to the analysis and architecture of data communication ISDN and BISDN via satellite. Dr. Chitre directs and participates in the international and national standards activities in ISDN BISDN and data communication as they apply to satellite communication. He was Chairman of the Working Group on Protocols and Network Timing Function of the CCIR/CCITT Joint Ad Hoc Group on ISDN/Satellite Matters during 1990–1992. Currently he is the Chairman of the Working Group on New Technologies in the ITU Intersector Coordinating Group (ICG) on Satellite Matters. Dr. Chitre was a programme manager during 1990 and 1991 on a contract from INTELSAT on systems studies on satellite communications systems architectures for ISDN and broadband ISDN systems. Currently he is the technical manager of the DoD Contract on ATM via satellite demonstration and the programme manager for the INTELSAT contract on analysis and top-level specification of INTELSAT ISDN subnetworks and SDH compatible transport network. Received the B.S. degree in electrical engineering from national Chiao-Tung University
Hsin-Chu Taiwan in 1983 and the M.S. and Ph.D. degrees in electrical engineering from Georgia Institute of Technology Atlanta GA in 1986 and 1990 respectively. From June 1987 to October 1987 he worked for the Department of Neurology Emory Univers
The role of satellite communications in networks that provide new services, such as frame relay and multimedia, is investigated. Both passive and active (on-board switching/processing) satellite systems are considered...
详细信息
The role of satellite communications in networks that provide new services, such as frame relay and multimedia, is investigated. Both passive and active (on-board switching/processing) satellite systems are considered. Novel techniques are developed for each system to demonstrate, via detailed analysis and simulation, how the communications bandwidth agility of multipoint/broadcast satellite channels, and the on-board switching/processing, makes it feasible to provide these new services via hybrid satellite and terrestrial networks in a resource-efficient manner.
作者:
TUCK, EFPATTERSON, DPSTUART, JRLAWRENCE, MHCalling Communications Corporation. 1900 West Garvey Ave
South. Suite 200 West Covina CA 91790 USA. Chairman of Calling Communications Corporation. He is also the Managing Director of Kinship Venture Management
Inc. the general partner of Kinship Partners 11 and a General Partner of Boundary the general partner of The Boundary Fund. As a venture capitalist he has founded or participated in founding several telecommunications companies including Calling Communications Corporation Magellan Systems Corporation
manufactures of Global Positioning System receivers Applied Digital Access
manufacturer of DS-3 test access and network performance monitoring equipment Endgate Technology Corporation
specialists in satellite phased array antennas and Poynting Systems Corporation. now a division of Reliance Corporation
manufacturers of fibre optic transport equipment. He was a founder of Kebby Microwave Corporation where he invented the first solid-state. frequency-modulated commercial microwave link system. The company was acquired by ITT Corporation where he rose to the position of V.P. and Technical Director of ITT North America Telecommunications Inc. Subsequently he was V.P. of Marketing and Engineering at American Telecommunications Inc. (ATC). He was founding Director of American Telecom Inc. a joint venture between ATC and Fujitsu and has served on more than 20 boards of directors including those of three public companies. He has authored articles on microwave engineering and telephone signalling and was a contributor to Reference Data For Radio Engineers. He is a graduate of the University of Missouri at Rolla where he was later awarded an honorary Professional degree and serves on its Academy of Electrical Engineering. Mr Tuck is a Senior Member of the IEEE a Fellow of the Institution of Engineers (Australia) a Professional Member of the AIAA and a registered professional engineer in three states. More than 25 years of experience in the telecommunications industry where he has been responsibl
There is a very large demand for basic telephone service in developing nations, and remote parts of industrialized nations, which cannot be met by conventional wireline and cellular systems. This is the world's la...
详细信息
There is a very large demand for basic telephone service in developing nations, and remote parts of industrialized nations, which cannot be met by conventional wireline and cellular systems. This is the world's largest unserved market. We describe a system which uses recent advances in active phased arrays, fast-packet switching technology, adaptive routeing, and light spacecraft technology, in part based on the work of the Jet Propulsion Laboratory and on recently-declassified work done on the Strategic Defense Initiative, to make it possible to address this market with a global telephone network based on a large low-Earth-orbit constellation of identical satellites. A telephone utility can use such a network to provide the same modern basic and enhanced telephone services offered by telephone utilities in the urban centres of fully-industrialized nations. Economies of scale permit capital and operating costs per subscriber low enough to provide a service to all subscribers, regardless of location, at prices comparable to the same services in urban areas of industrialized nations, while generating operating profits great enough to attract the capital needed for its construction. The bandwidth needed to support the capacity needed to gain these economies of scale requires that the system use K(alpha)-band frequencies. This choice of frequencies places unusual constraints on the network design, and in particular forces the use of a large number of satellites. Global demand for basic and enhanced telephone service is great enough to support at least three networks of the size described herein. The volume of advanced components, and services such as launch services, required to construct and replace these networks is sufficient to propel certain industries to market leadership positions in the early 21st Century.
作者:
Halverson, MarkOzdes, DemirMark Halverson:received a BSEE from the University of Michigan in 1972 followed by an MS in Computer
Information and Control System Engineering in 1973 also from the University of Michigan. Mr. Halverson has worked predominantly on military and aerospace design projects for such companies as Litton and Northrop. He is a specialist in inertial navigation and control systems. He has also worked with PLG Inc. as a risk analyst on various projects including commercial military and space applications. Since 1986 Mr. Halverson is an aerospace consultant working in Europe where he among other activities codeveloped the BRAT probabilistic risk analysis program. Demir Ozdes:received his BSEE from Purdue University in 1958 and his MSEE from the University of Arizona in 1963. He has over 35 years of experience in electronic design
system engineering optimal control system design and analysis as well as in the design analysis and simulation of synergistic navigation systems. He has worked at Northrop Teledyne SPC TRW and Litton. Since 1984 he has been a private consultant in the aerospace field in Europe and is co-holder of patents as well as being a co-developer of the BRAT probabilistic risk analysis program.
This paper takes a broad overview of the reliability and safety engineering practice as it is commonly exercised in the aerospace and military industries today, especially with respect to complex electronic equipment ...
详细信息
This paper takes a broad overview of the reliability and safety engineering practice as it is commonly exercised in the aerospace and military industries today, especially with respect to complex electronic equipment which typically includes considerable software content. A general deficiency is noted with regard to the system-level approach to reliability. It would appear that the system-level reliability activities are given less attention than is needed, while excessive emphasis is placed on component micro- physics, component failure models, and various component-oriented analyses. systems-level reliability topics, which predominate in the equipment reliability which is actually observed, are sometimes ignored by reliability engineers. Methods and practical philosophies to re-establish a solid systemengineering foundation for contemporary reliability practice, which have been developed through the authors' experience in the field, are presented. Finally, an example analysis is shown to illustrate the concepts.
作者:
BLACKWELL, LMLuther M. Blackwell:is presently the Data Multiplex System (DMS) program manager in the Bridge Control
Monitoring and Information Transfer Branch of the Naval Sea Systems Command (NavSea). He graduated from the University of Maryland in 1964 receiving his BS degree in electrical engineering. After graduating he was employed in the Bureau of Ships where he held project engineering assignments on various ships entertainment magnetic tape recording fiber optics computer mass memory and information transfer systems. He has also pursued graduate studies in engineering management at The George Washington University.
The Data Multiplex system (DMS) is a general-purpose information transfer system directed toward fulfilling the internal data intercommunication requirements of a variety of naval combatant ships and submarines in the...
详细信息
The Data Multiplex system (DMS) is a general-purpose information transfer system directed toward fulfilling the internal data intercommunication requirements of a variety of naval combatant ships and submarines in the 1990–2000 time frame. The need for a modern data transfer system of the size and capability of DMS has increased as various digital controlsystems throughout naval ships have adopted distributed processing architectures and reconfigurable control consoles, and as the quantity of remotely sensed and controlled equipment throughout the ship has increased manyfold over what it was in past designs. Instead of miles of unique cabling that must be specifically designed for each ship, DMS will meet information transfer needs with general-purpose multiplex cable that will be installed according to a standard plan that does not vary with changes to the ship's electronics suite. Perhaps the greatest impact of DMS will be the decoupling of ship subsystems from each other and from the ship. Standard multiplex interfaces will avoid the cost and delay of modifying subsystems to make them compatible. The ability to wire a new ship according to a standard multiplex cable plan, long before the ship subsystems are fully defined, will free both the ship and the subsystems to develop at their own pace, will allow compression of the development schedules, and will provide ships with more advanced subsystems. This paper describes the DMS system as it is currently being introduced into the fleet by the U.S. Navy. The results of its design and implementation in the DDG-51 and LHD-1 class ships are also presented.
A computer model is being developed by the David Taylor Research Center (DTRC) to analyze the tolerance of surface ship combat systems to combat-induced and self-inflicted damage. The work is being done in support of ...
详细信息
A computer model is being developed by the David Taylor Research Center (DTRC) to analyze the tolerance of surface ship combat systems to combat-induced and self-inflicted damage. The work is being done in support of the Navy's hull, mechanical and electrical design effort to improve the survivability of surface ship combat systems. The DDG-51 Detailed Design Specifications (Section 072f) and the General Specifications for Ships of the U.S. Navy (1986 Section 072e) both require that damage tolerance analyses be performed. A damage tolerance analysis shows the effect of damage on vital auxiliary and electrical systems and relates these damage effects to the capability of the ship to continue performing its combat mission at a prescribed level. Designated the Computer Aided Design of Survivable Distributed systems (CADSDiS) model, DTRC's deterministic analytical tool consists of portable software to be used by personnel at the activity responsible for the ship design. The model's graphics electrical module is now operating on Digital Equipment Corporation VAX computers at several Navy and commercial activities. Because CADSDiS is highly interactive, it becomes an integral part of the design cycle; this is its major benefit. Thus, damage tolerance analysis information is available to personnel designing the ship within hours or days rather than weeks or months. This computer model will help ensure that the survivability principles of separation and redundancy are incorporated into ship design and are realized in the ship as built.
Both the timely manufacture of defense systems and their subsequent on-line operability depend upon the availability of component parts. The growing problem of microelectronic component nonavailability is casting a sh...
详细信息
Both the timely manufacture of defense systems and their subsequent on-line operability depend upon the availability of component parts. The growing problem of microelectronic component nonavailability is casting a shadow over logistics support to these systems. This paper will discuss the causes of the problem and provide some examples of cases confronted by the DoD logistics community. It will also identify some actions which have been taken in the past to manage the issue as well as initiatives now underway. Finally it will look at what lies ahead.
作者:
LUEDEKE, GFARNHAM, RBJR.George Luedeke
Jr.: received his BS degree in Mechanical Engineering from Massachusetts Institute of Technology and his MS degree in Product Design from Illinois Institute of Technology. Early in his career Mr. Luedeke joined General Motors Corporation as a designer responsible for development of people mover and rail rapid transit systems. From 1964 to 1974 he was with Hughes Aircraft Company. At Hughes he performed analyses and developed designs for a wide variety of program and proposal efforts such as: High Speed Ground Transportation (DOT) Task Force Command Center (NAVY) Panama Canal Marine Traffic Control Center (Panama Canal Co.) Royal Iranian Navy Command Center (Iran) Tactical Information Processing and Interpretation Center (Air Force) and WALLEYE CONDOR and PHOENIX Missile Systems (NAVY). He also had marketing development responsibilities related to the diversification of Hughes resources in civil business areas such as: Automatic train control (WMATA BARTD SCRTD) water/sewage treatment plant automation (Santa Clara County) Aqueduct Control (SWR) Hydrometeorological data collection (BPA WMO) and Salton Sea basin systems analysis (Dept. of the Interior). He was responsible for combat system integration for the Hughes 2000T Surface Effect Ship (SES) proposal. He also conducted detailed studies concerning ship flexure for the Improved Point Defense Target Acquisition System Program and for the definition of operational High Energy Laser weapon installations on a series of conventional monohulls (DLG DD and CVN). Since 1974 Mr. Luedeke has been employed at RMI Inc. (formerly Rohr Marine Inc.). During this time he has held several positions. His responsibilities have included directing a number of studies on advanced SES concepts managing activities defining mission/cost effectiveness of military and commercial SES's including defining the operational benefits and enhanced survivability characteristics of cargo SES's for high speed military sealiftfor NA TO and Southeast Asia
This paper will present the results of a marketing, engineering, and economic analysis of advanced marine vehicles done by IMA Resources, Inc. and RMI, Inc., in support of a Maritime Administration project to study “...
This paper will present the results of a marketing, engineering, and economic analysis of advanced marine vehicles done by IMA Resources, Inc. and RMI, Inc., in support of a Maritime Administration project to study “Multimode Express Shipping”. The study was conducted in 1981 and examined the economic benefits of using advanced marine vehicles as express cargo vessels in domestic and international service. Commodity characteristics, desirable express carrier rates, and potential high payoff service and route alternatives were identified. Advanced marine vehicles were surveyed and sized to meet desirable deadweight and block speed objectives. The costs of operating these craft on a variety of trade routes were calculated using an advanced marine vehicle economic analysis program. Revenues, expenses, break-even, profit and loss, cash flow requirements, tax summary and economic indicators (i.e., cost/ton – mile, etc.) were projected over the expected life of the vehicles as was return on investment. Traffic density and market penetration considerations narrowed the field of choice to smaller sized advanced marine vehicle carriers (i.e., 50 and 250 ton deadweight) and to three international and five domestic routes.
The Shipboard Data Multiplex system (SDMS) is a general purpose information transfer system directed toward fulfilling the internal data Intercommunication requirements of a variety of naval combatant ships and submar...
The Shipboard Data Multiplex system (SDMS) is a general purpose information transfer system directed toward fulfilling the internal data Intercommunication requirements of a variety of naval combatant ships and submarines in the 1980–1990 time frame. The need for a modern data transfer system of the size and capability of SDMS has been increase in unison with the sophistication of shipboard electronic equipment and the associated magnitude of equipment-to-equipment signal traffic. Instead of the miles of unique cabling that must be specifically designed for each ship, SDMS will meet information transfer needs with general-purpose multiplex cable that will be Installed according to a standard plan that does not vary with changes to the ship's electronics suite. Perhaps the greatest impact of SDMS will be the decoupling of ship subsystems from each other and from the ship. Standard multiplex interfaces will avoid the cost and delay of modifying subsystems to make them compatible. The ability to wire a new ship according to a standard multiplex cable plan, long before the ship subsystems are fully defined, frees both the ship and the subsystems to develop at their own pace, will allow compression of the development schedules and will provide ships with more advanced subsystems. This paper describes the SDMS system currently being developed by the U.S. Navy.
Facilities Maintenance (FM), as currently performed by shipboard personnel, requires a considerable expenditure of man—hours and material resources and is not performed efficiently nor effectively. Potential solution...
暂无评论