检索结果-内蒙古大学图书馆

System Reliability and Safety Engineering (SRSE), International Conference on

作者： Ruiqi Li Kai Wang Peng Zeng Jiwei Cao State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China University of Chinese Academy of Sciences Beijing China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Department of Electrical Engineering Harbin Institute of Technology China

Active magnetic bearings (AMBs) have many advantages over traditional oil bearings due to their non-contact characteristics. They are environmentally friendly solution and have been proven to be highly reliable and available. Electromagnetic coils are vital components of AMB and they are failure prone. In this paper, the failure mode of magnetic bearing coil and its corresponding failure mechanism are reviewed by FMMEA method, and the existing coil fault diagnosis methods are introduced. Future directions for coil insulation health monitoring aiming at the application characteristics of AMBs are also discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Robust MPC for networks with varying communication capabilities

引用

IFAC-PapersOnLine 2021年第6期54卷 20-27页

作者： Markus Kögel Daniel Quevedo Rolf Findeisen Laboratory for Systems Theory and Automatic Control Otto-von-Guericke University Magdeburg Germany School of Electrical Engineering and Robotics Queensland University of Technology Brisbane Australia

We consider the control of constrained, uncertain systems over wireless communication networks with varying capabilities. We focus on the case that a radio resource manager, which manages the wireless network, provides guaranteed minimum communication at fixed time instants while offering more frequent communication depending on the current load of the shared network, available network capacity or other conditions. To exploit the additionally available communication we propose a robust model predictive control strategy exploiting ideas of tube MPC that utilizes the possibly additionally available communication to improve the closed loop performance. Conditions to guarantee closed loop properties are presented. Simulations illustrate the proposed approach and its benefits.

关键词： Networked control systems control over wireless networks Robust Model Predictive control Tube based MPC Internet of things Cyber-physical systems

来源：评论

学校读者我要写书评

暂无评论

Environment-Driven Online LiDAR-Camera Extrinsic Calibration

arXiv

引用

arXiv 2025年

作者： Huang, Zhiwei Li, Jiaqi Zhong, Ping Fan, Rui The Department of Control Science & Engineering The College of Electronics & Information Engineering Tongji University Shanghai201804 China The School of Computer Science and Engineering Central South University Hunan Changsha410083 China The National Key Laboratory of Science and Technology on Automatic Target Recognition National University of Defense Technology Hunan Changsha410073 China The Department of Control Science & Engineering The College of Electronics & Information Engineering Shanghai Research Institute for Intelligent Autonomous Systems The State Key Laboratory of Intelligent Autonomous Systems Frontiers Science Center for Intelligent Autonomous Systems Tongji University Shanghai201804 China The National Key Laboratory of Human-Machine Hybrid Augmented Intelligence Institute of Artificial Intelligence and Robotics Xi’an Jiaotong University Shaanxi Xi’an710049 China

LiDAR-camera extrinsic calibration (LCEC) is the core for data fusion in computer vision. Existing methods typically rely on customized calibration targets or fixed scene types, lacking the flexibility to handle variations in sensor data and environmental contexts. This paper introduces EdO-LCEC, the first environment-driven, online calibration approach that achieves human-like adaptability. Inspired by the human perceptual system, EdO-LCEC incorporates a generalizable scene discriminator to actively interpret environmental conditions, creating multiple virtual cameras that capture detailed spatial and textural information. To overcome cross-modal feature matching challenges between LiDAR and camera, we propose dual-path correspondence matching (DPCM), which leverages both structural and textural consistency to achieve reliable 3D-2D correspondences. Our approach formulates the calibration process as a spatial-temporal joint optimization problem, utilizing global constraints from multiple views and scenes to improve accuracy, particularly in sparse or partially overlapping sensor views. Extensive experiments on real-world datasets demonstrate that EdO-LCEC achieves state-of-the-art performance, providing reliable and precise calibration across diverse, challenging environments. Copyright © 2025, The Authors. All rights reserved.

关键词： Spatio-temporal data

来源：评论

学校读者我要写书评

暂无评论

A feature selection method combined with ridge regression and recursive feature elimination in quantitative analysis of laser induced breakdown spectroscopy

引用

Plasma Science and Technology 2020年第7期22卷 11-20页

作者： Guodong WANG Lanxiang SUN Wei WANG Tong CHEN Meiting GUO Peng ZHANG State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016People’s Republic of China Key Laboratory of Networked Control Systems Chinese Academy of SciencesShenyang 110016People’s Republic of China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169People’s Republic of China University of Chinese Academy of Sciences Beijing 100049People's Republic of China

In the spectral analysis of laser-induced breakdown spectroscopy,abundant characteristic spectral lines and severe interference information exist simultaneously in the original spectral ***,a feature selection method called recursive feature elimination based on ridge regression(Ridge-RFE)for the original spectral data is recommended to make full use of the valid information of *** the Ridge-RFE method,the absolute value of the ridge regression coefficient was used as a criterion to screen spectral characteristic,the feature with the absolute value of minimum weight in the input subset features was removed by recursive feature elimination(RFE),and the selected features were used as inputs of the partial least squares regression(PLS)*** Ridge-RFE method based PLS model was used to measure the Fe,Si,Mg,Cu,Zn and Mn for 51 aluminum alloy samples,and the results showed that the root mean square error of prediction decreased greatly compared to the PLS model with full spectrum as *** overall results demonstrate that the Ridge-RFE method is more efficient to extract the redundant features,make PLS model for better quantitative analysis results and improve model generalization ability.

关键词： laser-induced breakdown spectroscopy feature selection ridge regression recursive feature elimination quantitative analysis

来源：评论

学校读者我要写书评

暂无评论

Brain over Brawn: Using a Stereo Camera to Detect, Track, and Intercept a Faster UAV by Reconstructing the Intruder's Trajectory

arXiv

引用

arXiv 2021年

作者： Barišić, Antonella Petric, Frano Bogdan, Stjepan Laboratory for Robotics and Intelligent Control Systems Faculty of Electrical Engineering and Computing University of Zagreb Unska 3 Zagreb Croatia

This paper presents our approach to intercepting a faster intruder UAV, inspired by the MBZIRC 2020 Challenge 1. By utilizing a priori knowledge of the shape of the intruder's trajectory, we can calculate an interception point. Target tracking is based on image processing by a YOLOv3 Tiny convolutional neural network, combined with depth calculation using a gimbal-mounted ZED Mini stereo camera. We use RGB and depth data from the camera, devising a noise-reducing histogram-filter to extract the target's 3D position. Obtained 3D measurements of target's position are used to calculate the position, orientation, and size of a figure-eight shaped trajectory, which we approximate using a Bernoulli lemniscate. Once the approximation is deemed sufficiently precise, as measured by the distance between observations and estimate, we calculate an interception point to position the interceptor UAV directly on the intruder's path. Our method, which we have significantly improved based on the experience gathered during the MBZIRC competition, has been validated in simulation and through field experiments. Our results confirm that we have developed an efficient, visual-perception module that can extract information describing the intruder UAV's motion with precision sufficient to support interception planning. In a majority of our simulated encounters, we can track and intercept a target that moves 30% faster than the interceptor. Corresponding tests in an unstructured environment yielded 9 out of 12 successful results. © 2021, CC BY-NC-SA.

关键词： Unmanned aerial vehicles (UAV)

来源：评论

学校读者我要写书评

暂无评论

基于自解耦三明治结构的横向运动栅场效应晶体管MEMS微力传感器

引用

Engineering 2023年第2期21卷 61-74,M0004页

作者：高文迪乔智霞韩香广王小章 Adnan Shakoor 刘存朗卢德江杨萍赵立波王永录王久洪蒋庄德孙东 State Key Laboratory for Manufacturing Systems Engineering International Joint Laboratory for Micro/Nano Manufacturing and Measurement TechnologiesOverseas Expertise Introduction Center for Micro/Nano Manufacturing and Nano Measurement Technologies Discipline InnovationXi’an Jiaotong University(Yantai)Research Institute for Intelligent Sensing Technology and SystemSchool of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710049China Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing Yantai 265503China Beijing Advanced Innovation Center for Intelligent Robots and Systems Beijing Institute of TechnologyBeijing 100081China State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin 150006China Eleventh Research Institute Sixth Academy of China Aerospace Science and Technology Co.Xi’an 710100China Department of Control and Instrumentation Engineering King Fahd University of Petroleum and MineralsDhahran 31261Saudi Arabia Department of Biomedical Engineering City University of Hong KongHong Kong 999077China

本文介绍了一种基于横向可移动栅极场效应晶体管(LMGFET)的新型微型力传感器的开发。提出了一种精确的电气模型,用于小型LMGFET器件的性能评估,与以前的模型相比,其精度有所提高。采用了一种新型三明治结构,该结构由一个金交叉解耦栅阵... 详细信息

本文介绍了一种基于横向可移动栅极场效应晶体管(LMGFET)的新型微型力传感器的开发。提出了一种精确的电气模型,用于小型LMGFET器件的性能评估,与以前的模型相比,其精度有所提高。采用了一种新型三明治结构,该结构由一个金交叉解耦栅阵列层和两个软光阻层SU-8组成。通过所提出的双差分传感结构,LMGFET横向工作在垂直干扰下的输出电流被大大消除,所提出传感器的相对输出误差从4.53%(传统差分结构)降低到0.01%。提出了一种实用的传感器制造工艺,并对其进行了模拟。基于LMGFET的力传感器的灵敏度为4.65μA·nN^(-1),可与垂直可移动栅极场效应晶体管(VMGFET)器件相媲美,但非线性度提高了0.78%,测量范围扩大了±5.10μN。这些分析为LMGFET器件的电气和结构参数提供了全面的设计优化,并证明了所提出的传感器在生物医学显微操作应用中具有良好的力传感潜力。

关键词：力传感器场效应晶体管横向运动三明治结构电气模型显微操作非线性度双差分

来源：评论

学校读者我要写书评

暂无评论

Correlate-and-excite: Real-time stereo matching via guided cost volume excitation

arXiv

引用

arXiv 2021年

作者： Bangunharcana, Antyanta Cho, Jae Won Lee, Seokju Kweon, In So Kim, Kyung-Soo Kim, Soohyun Mechatronics Systems and Control Laboratory KAIST Daejeon34141 Korea Republic of Robotics and Computer Vision Laboratory KAIST Daejeon34141 Korea Republic of

Volumetric deep learning approach towards stereo matching aggregates a cost volume computed from input left and right images using 3D convolutions. Recent works showed that utilization of extracted image features and a spatially varying cost volume aggregation complements 3D convolutions. However, existing methods with spatially varying operations are complex, cost considerable computation time, and cause memory consumption to increase. In this work, we construct Guided Cost volume Excitation (GCE) and show that simple channel excitation of cost volume guided by image can improve performance considerably. Moreover, we propose a novel method of using top-k selection prior to soft-argmin disparity regression for computing the final disparity estimate. Combining our novel contributions, we present an end-to-end network that we call Correlate-and-Excite (CoEx). Extensive experiments of our model on the SceneFlow, KITTI 2012, and KITTI 2015 datasets demonstrate the effectiveness and efficiency of our model and show that our model outperforms other speed-based algorithms while also being competitive to other state-of-the-art algorithms. © 2021, CC BY.

关键词： Convolution

来源：评论

学校读者我要写书评

暂无评论

Knowledge-aware Graph Transformer for Pedestrian Trajectory Prediction

Knowledge-aware Graph Transformer for Pedestrian Trajectory ...

引用

International Conference on Intelligent Transportation

作者： Yu Liu Yuexin Zhang Kunming Li Yongliang Qiao Stewart Worrall You-Fu Li He Kong Shenzhen Key Laboratory of Control Theory and Intelligent Systems Southern University of Science and Technology (SUSTech) Shenzhen China Department of Mechanical Engineering City University of Hong Kong Hong Kong SAR China School of Automation Guangdong Polytechnic Normal University Guangzhou China Australian Centre for Field Robotics The University of Sydney NSW Australia Australian Institute for Machine Learning The University of Adelaide SA Australia Department of Mechanical Engineering City University of Hong Kong Hong Kong SAR China Shenzhen Key Laboratory of Control Theory and Intelligent Systems SUSTech Shenzhen China Guangdong Provincial Key Laboratory of Human-Augmentation Rehabilitation Robotics in Universities SUSTech Shenzhen China

Predicting pedestrian motion trajectories is crucial for path planning and motion control of autonomous vehicles. Accurately forecasting crowd trajectories is challenging due to the uncertain nature of human motions in different environments. For training, recent deep learning-based prediction approaches mainly utilize information like trajectory history and interactions between pedestrians, among others. This can limit the prediction performance across various scenarios since the discrepancies between training datasets have not been properly incorporated. To overcome this limitation, this paper proposes a graph transformer structure to improve prediction performance, capturing the differences between the various sites and scenarios contained in the datasets. In particular, a self-attention mechanism and a domain adaption module have been designed to improve the generalization ability of the model. Moreover, an additional metric considering cross-dataset sequences is introduced for training and performance evaluation purposes. The proposed framework is validated and compared against existing methods using popular public datasets, i.e., ETH and UCY. Experimental results demonstrate the improved performance of our proposed scheme.

关键词：

来源：评论

学校读者我要写书评

暂无评论

control of a system of two interacting bodies on a rough inclined plane 15

Control of a system of two interacting bodies on a rough inc...

引用

15th International Conference on Stability and Oscillations of Nonlinear control systems (Pyatnitskiy's Conference), STAB 2020

作者： Bolotnik, N.N. Figurina, T. Yu. Ishlinsky Institute for Problems in Mechanics Ras Laboratory of Robotics and Mechatronics Moscow Russia Ishlinsky Institute for Problems in Mechanics Ras Laboratory of Control of Mechanical Systems Moscow Russia

ISBN: (纸本)9781728167053

For a system of two bodies on an inclined plane with Coulomb's friction, the in-principle possibility for driving the system to an arbitrary terminal state of rest by means of control of the interaction force between the bodies is proved for the case where the bodies do not rest on the common line of maximum slope in the initial state. A control algorithm that combines quasistatic and fast motions is designed. © 2020 IEEE.

关键词： Machinery

来源：评论

学校读者我要写书评

暂无评论

Design and Implementation of OpenWSN Hardware Platform

Design and Implementation of OpenWSN Hardware Platform

引用

Algorithms, High Performance Computing and Artificial Intelligence (AHPCAI), International Conference on

作者： Shusheng Zhang Chuang Xie Jun Liu Chun Zhao Zhijia Yang Jizhi Mao College of Automation and Electrical Engineering Shenyang Ligong University Shenyang China State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

This paper proposes a new wireless sensor network hardware platform based on OpenWSN project launched by the University of California, Berkeley. The hardware platform's processor uses a 32-bit microcontroller (STM32F103RCT6) produced by STMicroelectronics (ST), and the wireless module uses the WISA470 chip. The final experimental results show that this platform can support the Open WSN project very well.

关键词： Wireless communication Radio frequency Wireless sensor networks Protocols Power supplies Microcontrollers Hardware

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：