检索结果-内蒙古大学图书馆

Yolk-shell FeSe_(2)@CoSe_(2)/FeSe_(2) heterojunction as anode materials for sodium-ion batteries with high rate capability and stability

引用

Journal of materials Science & technology 2024年第5期172卷 185-195页

作者： Liuyang Zhang Bicheng Zhu Difa Xu Zibao Qian Ping Xie Tao Liu Jiaguo Yu Laboratory of Solar Fuel Faculty of Materials Science and ChemistryChina University of GeosciencesWuhan 430078China Hunan Key Laboratory of Applied Environmental Photocatalysis Changsha UniversityChangsha 410022China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Sodium-ion batteries are promising candidates for large-scale grid storage systems and other *** foremost advantage derives from superior environmental credentials,enhanced safety as well as lower raw material costs than lithium-ion *** is still challenging to explore desirable anode *** this study,FeSe_(2)@CoSe_(2)/FeSe_(2),with a yolk-shell structure was prepared by ion exchange and *** FeSe_(2)@CoSe_(2)/FeSe_(2)prepared as anode material for sodiumion batteries exhibits excellent rate capability due to the synergistic effect of bimetallic selenides and the interfacial effect of the ***,it delivers high performance(510 mAh g^(-1)at 0.2 A g^(-1)),superior rate capa-bility(90%retention at 5 A g^(-1)),and good long-time cycling stability(78%capacity retention after 1800 cycles at a high current density of 2 A g^(-1)).The optimized sodiumion full cell with FeSe_(2)@CoSe_(2)/FeSe_(2)as the anode and Na 3 V 2(PO 4)3 as the cathode still demonstrates excellent ***,a ca-pacity of 272 mAh g^(-1)(at 1 A g^(-1))within the operating voltage from 1 to 3.8 V can be *** work illustrates the potential of bimetallic selenides with heterostructures for performance enhancement of sodium-ion batteries.

关键词： Cobalt-iron selenide Heterojunctions Sodium storage Anode material Full battery

来源：评论

学校读者我要写书评

暂无评论

In situ confined vertical growth of Co_(2.5)Ni_(0.5)Si_(2)O_(5)(OH)_(4)nanoarrays on rGO for an efficient oxygen evolution reaction

引用

Nano materials Science 2023年第4期5卷 351-360页

作者： Yang Mu Xiaoyu Pei Yunfeng Zhao Xueying Dong Zongkui Kou Miao Cui Changgong Meng Yifu Zhang State Key Laboratory of Fine Chemicals School of Chemical EngineeringDalian University of TechnologyDalian116024China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China

Rational design of oxygen evolution reaction(OER)catalysts at low cost would greatly benefit the *** advantage of earth-abundant elements Si,Co and Ni,we produce a unique-structure where cobalt-nickel silicate hydroxide[Co_(2.5)Ni_(0.5)Si_(2)O_(5)(OH)_(4)]is vertically grown on a reduced graphene oxide(rGO)support(CNS@rGO).This is developed as a low-cost and prospective OER *** to cobalt or nickel silicate hydroxide@rGO(CS@rGO and NS@rGO,respectively)nanoarrays,the bimetal CNS@rGO nanoarray exhibits impressive OER performance with an overpotential of 307 mV@10 mA cm^(-2).This value is higher than that of CS@rGO and NS@*** CNS@rGO nanoarray has an overpotential of 446 mV@100 mA cm^(-2),about 1.4 times that of the commercial RuO_(2)*** achieved OER activity is superior to the state-of-the-art metal oxides/hydroxides and their *** vertically grown nanostructure and optimized metal-support electronic interactions play an indispensable role for OER performance improvement,including a fast electron transfer pathway,short proton/electron diffusion distance,more active metal centers,as well as optimized dualatomic electron *** advantage of interlay chemical regulation and the in-situ growth method,the advanced-structural CNS@rGO nanoarrays provide a new horizon to the rational and flexible design of efficient and promising OER electrocatalysts.

关键词： Co_(2.5)Ni_(0.5)Si_(2)O_(5)(OH)_(4)@rGO Vertical grown nanoarrays Geometric and electronic structure regulation Metal-support interactions Oxygen evolution reaction

来源：评论

学校读者我要写书评

暂无评论

Acidic oxygen evolution reaction:Mechanism,catalyst classification,and enhancement strategies

引用

Interdisciplinary materials 2023年第1期2卷 53-90页

作者： Qianli Ma Shichun Mu Fuel cell Materials Laboratory Foshan Xianhu LaboratoryFoshanChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhanChina

As the most desirable hydrogen production device,the highly efficient acidic proton exchange membrane water electrolyzers(PEMWE)are severely limited by the sluggish kinetics of oxygen evolution reaction(OER)at the *** IrO2 is a commercial acid-stable OER catalyst with poor activity and high cost,which has motivated the development of ***,hitherto most of the designed acidic OER catalysts have disadvantages of low activity or stability,which cannot meet the requirement of industrial ***,exploring suitable strategies to enhance the activity and stability of cost-effective acidic OER catalysts is crucial for developing the PEMWE *** this review,the main OER mechanisms,different types of catalysts,and their activity and stability characteristics are summarized and discussed,and then possible strategies to improve activity and stability are ***,the problems and prospects of such catalysts are generalized to shed some light on the future research of advanced catalysts for acidic OER.

关键词： catalyst hydrogen energy oxygen evolution reaction proton exchange membrane water electrolyzer water oxidation

来源：评论

学校读者我要写书评

暂无评论

Catalytic recycling of plastics into value-added products

引用

Nano Research 2024年第11期17卷 9428-9445页

作者： Tianyu Wei Pengcheng Zhou Wenxian Liu Xijun Liu Tairong Kuang Functional Polymers and Advanced Materials (FPAM) Lab Zhejiang Key Laboratory of Plastic Modification and Processing Technology College of Materials Science and Engineering Zhejiang University of Technology Hangzhou 310014 China State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures Guangxi Key Laboratory of Processing for Nonferrous Metals and Featured Materials MOE Key Laboratory of New Processing Technology for Nonferrous Metals and Materials School of Resources Environment and Materials Guangxi University Nanning 530004 China

The overuse and ineffective management of plastics have led to significant environmental pollution. Catalytic upcycling into value-added chemicals has emerged as a promising solution. This review provides a comprehensive overview of recent advances in catalytic upcycling, focusing on the cleavage of chemical bonds such as carbon-carbon (C-C), carbon-oxygen (C-O), and carbon-hydrogen (C-H) in plastics. It systematically discusses plastics conversion via electrocatalysis, thermal catalysis, and photocatalysis. Additionally, it explores the conversion of plastics into value-added chemicals and functional polymers. The review also addresses the challenges in this field and aims to offer insights for developing sustainable and effective plastics upcycling technologies.

关键词： plastics recycling catalysis chemical recycling value-added chemicals functional polymers

来源：评论

学校读者我要写书评

暂无评论

Exploring photogenerated charge carrier transfer in semiconductor/metal junctions using Kelvin probe force microscopy

引用

Journal of materials Science & technology 2024年第6期173卷 11-19页

作者： Chuanbiao Bie Zheng Meng Bowen He Bei Cheng Gang Liu Bicheng Zhu Laboratory of Solar Fuel Faculty of Materials Science and ChemistryChina University of GeosciencesWuhan 430078China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China CAS Key Laboratory of Standardization and Measurement for Nanotechnology National Center for Nanoscience and TechnologyBeijing 100190China

Semiconductor/metal junctions are widely discussed in ***,there is a notable scarcity of systematic studies focusing on photogenerated charge carrier transfer in such ***,CdS/Pt,CdS/Au,and CdS/Ag are synthesized to serve as model systems for investigating the charge carrier transfer in semiconductor/metal *** probe force microscopy is employed to visualize the transfer of photogenerated carriers in these *** results show that the electron transfer behavior under illumination is related to the conduction band position of CdS and the Fermi level position of the ***,Schottky junctions hinder the transfer of photogenerated electrons from CdS to Pt and Au,whereas ohmic contacts facilitate the transfer of photogenerated electrons from CdS to *** work provides novel insights into the mechanisms governing the transfer of photogenerated carriers in semiconductor/metal junctions.

关键词： Kelvin probe force microscopy Surface potential Work function Contact potential difference Charge carrier transfer

来源：评论

学校读者我要写书评

暂无评论

Eu3+ doped hydroxyapatite nanowires enabling solid-state electrolytes with enhanced ion transport

引用

Journal of materials Science & technology 2024年第19期186卷 104-109页

作者： Xiaoyue Wang Hong Zhang Lin Xu Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Wuhan University of Technology(Xiangyang Demonstration Zone)Xiangyang 441000China Hainan Institute Wuhan University of TechnologySanya 572000China

The polymer-based solid-state electrolytes (PSEs) are promising for solid-state batteries but they have deficiencies such as low ionic conductivity, low lithium-ion transference number, and unstable electrode/electrolyte interface. Herein, we designed a hydroxyapatite nanowire doped with high-valence cations in anticipation of the formation of positively charged active sites on the nanowire surface. The higher surface activity can reduce the reaction activation energy on the nanowire surface and adsorb the anions in the PSEs as a way to improve the ionic conductivity and Li+ transference number of the PSEs. The active sites on the surface of the nanowires anchor the anions, thus increasing the Li+ transference number to 0.38, which effectively improves the ionic conductivity of the PSE to 1.58 × 10-4 S cm-1 at room temperature. At the same time, the composite polymer electrolyte has a wide electrochemical window. The lithium symmetric cell stably cycles for 800 h at a current density of 0.1 mA cm-2, and the LiFePO4||Li full cell steadily cycles for 180 cycles at a rate of 0.5 C with a capacity retention of 94.2 %. The ion doping strategy to change the surface electrical behavior of nanowires provides an idea to improve the ionic conductivity of solid-state electrolytes.

关键词： Nanowires Ion doping Active site Polymer-based solid-state electrolyte

来源：评论

学校读者我要写书评

暂无评论

Deep learning-enhanced NIR-II fluorescence volumetric microscopy for dynamic 3D vascular imaging

引用

Journal of Innovative Optical Health Sciences 2025年第3期18卷 154-164页

作者： Shiyi Peng Yuhuang Zhang Xuanjie Mou Tianxiang Wu Mingxi Zhang Jun Qian State Key Laboratory of Extreme Photonics and Instrumentation International Research Center for Advanced PhotonicsCentre for Optical and Electromagnetic ResearchCollege of Optical Science and EngineeringZhejiang UniversityHangzhou 310058P.R.China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070P.R.China

Three-dimensional (3D) visualization of dynamic biological processes in deep tissue remains challenging due to the trade-off between temporal resolution and imaging depth. Here, we present a novel near-infrared-II (NIR-II, 900–1880nm) fluorescence volumetric microscopic imaging method that combines an electrically tunable lens (ETL) with deep learning approaches for rapid 3D imaging. The technology achieves volumetric imaging at 4.2 frames per second (fps) across a 200 μm depth range in live mouse brain vasculature. Two specialized neural networks are utilized: a scale-recurrent network (SRN) for image enhancement and a cerebral vessel interpolation (CVI) network that enables 16-fold axial upsampling. The SRN, trained on two-photon fluorescence microscopic data, improves both lateral and axial resolution of NIR-II fluorescence wide-field microscopic images. The CVI network, adapted from video interpolation techniques, generates intermediate frames between acquired axial planes, resulting in smooth and continuous 3D vessel reconstructions. Using this integrated system, we visualize and quantify blood flow dynamics in individual vessels and are capable of measuring blood velocity at different depths. This approach maintains high lateral resolution while achieving rapid volumetric imaging, and is particularly suitable for studying dynamic vascular processes in deep tissue. Our method demonstrates the potential of combining optical engineering with artificial intelligence to advance biological imaging capabilities.

关键词： NIR-II fluorescence bioimaging volumetric microscopy deep learning reconstruction dynamic vascular imaging

来源：评论

学校读者我要写书评

暂无评论

Unraveling the Role of Nitrogen-Doped Carbon Nanowires Incorporated with MnO_(2)Nanosheets as High Performance Cathode for Zinc-Ion Batteries

引用

Energy & Environmental materials 2023年第3期6卷 205-213页

作者： Xiaohui Li Qiancheng Zhou Ze Yang Xing Zhou Dan Qiu Huajun Qiu Xintang Huang Ying Yu Institute of Nanoscience and Technology College of Physical Science and TechnologyCentral China Normal UniversityWuhan 430079China State Key Laboratory of Advanced Technology for Materials Synthesis and processing Wuhan University of Technology Wuhan 430070China

Manganese-based cathode materials are considered as a promising candidate for rechargeable aqueous zinc-ion batteries(ZIBs).Suffering from poor conductive and limited structure tolerance,various carbon matrix,especially N-doped carbon,were employed to incorporate with MnO_(2)for greatly promoted electrochemical ***,the related underlying mechanism is still unknown,which is unfavorable to guide the design of high performance ***,by incorporating layered MnO_(2)with N-doped carbon nanowires,a free-standing cathode with hierarchical core-shell structure(denoted as MnO_(2)@NC)is *** from the N-doped carbon and rational architecture,the MnO_(2)@NC electrode shows an enhanced specific capacity(325 mAh g^(−1)at 0.1 A g^(−1))and rate performance(90 mAh g^(−1)at 2 A g^(−1)),as well as improved cycling ***,the performance improvement mechanism of MnO_(2)incorporated by N-doped carbon is investigated by X-ray photoelectron spectroscopy(XPS),Raman spectrums and density functional theory(DFT)*** N atom elongates the Mn-O bond and reduces the valence of Mn^(4+)ion in MnO_(2)crystal by delocalizing its electron ***,the electrostatic repulsion will be weakened when Zn^(2+)/H^(+)insert into the host MnO_(2)lattices,which is profitable to more cation insertion and faster ion transfer kinetics for higher capacity and rate *** work elucidates a fundamental understanding of the functions of N-doped carbon in composite materials and shed light on a practical pathway to optimize other electrode materials.

关键词： core-shell nanostructure MnO_(2)nanosheets N-doped carbon Zn ion batteries

来源：评论

学校读者我要写书评

暂无评论

4D printing for future manufacturing

引用

Science China materials 2023年第11期66卷 4517-4518页

作者： Chaolin Tan Ji Zou Zhengyi Fu Singapore Institute of Manufacturing Technology(SIMTech) Agency for ScienceTechnology and Research(A*STAR)Singapore 636732Singapore State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Additive manufacturing(AM),also called three-dimensional(3D)printing,offers disruptive design freedom and manufacturing flexibility due to the layer-wise incremental formation manner of *** in AM techniques provide unique advantages and feasibilities for overcoming challenges arising from fabricating parts with complexities in geometry,materials,and properties.

关键词： printing properties freedom

来源：评论

学校读者我要写书评

暂无评论

Effect of ball milling time on the microstructure and compressive properties of the Fe–Mn–Al porous steel

引用

International Journal of Minerals,Metallurgy and materials 2023年第5期30卷 917-929页

作者： Lingzhi Xie Zhigang Xu Yunzhe Qi Jinrong Liang Peng He Qiang Shen Chuanbin Wang Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of TechnologyWuhan 430070China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Wuhan Second Ship Design and Research Institute Wuhan 430205China

In the present work,Fe–Mn–Al–C powder mixtures were manufactured by elemental powders with different ball milling time,and the porous high-Mn and high-Al steel was fabricated by powder *** results indicated that the powder size significantly decreased,and the morphology of the Fe powder tended to be increasingly flat as the milling time ***,the prolonged milling duration had limited impact on the phase transition of the powder *** main phases of all the samples sintered at 640℃ were α-Fe,α-Mn and Al,and a small amount of Fe2Al5 and *** the sintering temperature increased to 1200℃,the phase composition was mainly comprised of γ-Fe and α-*** weight loss fraction of the sintered sample decreased with milling time,i.e.,8.3wt% after 20 h milling compared to15.3wt% for 10 *** Mn depletion region(MDR) for the 10,15,and 20 h milled samples was about 780,600,and 370 μm,*** total porosity of samples sintered at 640℃ decreased from ~46.6vol% for the 10 h milled powder to ~44.2vol% for 20 h milled *** sintering at 1200℃,the total porosity of sintered samples prepared by 10 and 20 h milled powder was ~58.3vol% and ~51.3vol%,*** compressive strength and ductility of the 1200℃ sintered porous steel increased as the milling time increased.

关键词： powder metallurgy porous steel ball milling time microstructure evolution compressive properties

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：