检索结果-内蒙古大学图书馆

IEEE International Conference on automation science and Engineering (CASE)

作者： Kunlin Guo Chao Zeng Weiyong Si Ning Wang Chenguang Yang Key Laboratory of Autonomous Systems and Networked Control School of Automation Science and Engineering South China University of Technology Guangzhou China Department of Computer Science University of Liverpool Liverpool UK School of Computer Science and Electronic Engineering University of Essex Colchester Bristol Robotics Laboratory University of the West of England Bristol UK

ISBN: (数字)9798350358513

ISBN: (纸本)9798350358520

In traditional control methods, Series Elastic Actuator (SEA) joint manipulators are limited by their hardware and can only perform simple tasks with low stiffness. To address this issue, we propose a stiffness adjustment control strategy for SEA manipulators based on Dynamic Systems (DS) with good generalization performance. By enhancing the generalization capability of DS in complex tasks and combining posture control, the SEA manipulators can autonomously adjust control gains and postures according to task requirements to achieve higher stiffness at the end-effector. Experimental results involving the activation of air switches with different stiffness levels and installation angles have demonstrated the effectiveness of our proposed method. The results indicate that compared to traditional methods of adjusting the control gain and retraining DS for similar tasks, our approach exhibits superior generalization performance while maintaining end-effector stiffness during interactions.

关键词： Actuators computer aided software engineering automation Adaptive systems control systems End effectors Hardware Dynamical systems Manipulator dynamics

来源：评论

学校读者我要写书评

暂无评论

High Performance Distributed control Law for Large-Scale Linear Systems: A Partitioned Distributed Observer Approach

arXiv

引用

arXiv 2024年

作者： Xu, Haotian Liu, Shuai Shi, Ling Department of Automation Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai200240 China Department of Electronic and Computer Engineering The Hong Kong University of Science and Technology Hong Kong

In recent years, the distributed-observer-based distributed control law has shown powerful ability to arbitrarily approximate the centralized control performance. However, the traditional distributed observer requires each local observer to reconstruct the state information of the whole system, which is unrealistic for large-scale scenarios. To fill this gap, this paper develops a greedy-idea-based large-scale system partition algorithm, which can significantly reduce the dimension of local observers. Then, the partitioned distributed observer for large-scale systems is proposed to overcome the problem that the system dynamics are difficult to estimate due to the coupling between partitions. Furthermore, the two-layer Lyapunov analysis method is adopted and the dynamic transformation lemma of compact errors is proved, which solves the problem of analyzing stability of the error dynamic of the partitioned distributed observer. Finally, it is proved that the distributed control law based on the partitioned distributed observer can also arbitrarily approximate the control performance of the centralized control law, and the dimension of the local observer is greatly reduced compared with the traditional method. The simulation results show that when the similarity between the physical network and the communication network is about 80%, the local observer dimension is greatly reduced by 90% and the relative error between the performance of the distributed control law and that of the centralized control law is less than 1%. © 2024, CC BY.

关键词： Continuous time systems

来源：评论

学校读者我要写书评

暂无评论

Fast Full-frame Video Stabilization with Iterative Optimization

Fast Full-frame Video Stabilization with Iterative Optimizat...

引用

International Conference on computer Vision (ICCV)

作者： Weiyue Zhao Xin Li Zhan Peng Xianrui Luo Xinyi Ye Hao Lu Zhiguo Cao Key Laboratory of Image Processing and Intelligent Control Ministry of Education School of Artificial Intelligence and Automation Huazhong University of Science and Technology Wuhan China Department of Computer Science University of Albany Albany NY

Video stabilization refers to the problem of transforming a shaky video into a visually pleasing one. The question of how to strike a good trade-off between visual quality and computational speed has remained one of the open challenges in video stabilization. Inspired by the analogy between wobbly frames and jigsaw puzzles, we propose an iterative optimization-based learning approach using synthetic datasets for video stabilization, which consists of two interacting submodules: motion trajectory smoothing and full-frame outpainting. First, we develop a two-level (coarse-to-fine) stabilizing algorithm based on the probabilistic flow field. The confidence map associated with the estimated optical flow is exploited to guide the search for shared regions through backpropagation. Second, we take a divide-and-conquer approach and propose a novel multi-frame fusion strategy to render full-frame stabilized views. An important new insight brought about by our iterative optimization approach is that the target video can be interpreted as the fixed point of nonlinear mapping for video stabilization. We formulate video stabilization as a problem of minimizing the amount of jerkiness in motion trajectories, which guarantees convergence with the help of fixed-point theory. Extensive experimental results are reported to demonstrate the superiority of the proposed approach in terms of computational speed and visual quality. The code will be available on GitHub.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RoboDesign1M: A Large-scale Dataset for Robot Design Understanding

arXiv

引用

arXiv 2025年

作者： Le, Tri Nguyen, Toan Tran, Quang Nguyen, Quang Huang, Baoru Nguyen, Hoan Vu, Minh Nhat Ta, Tung D. Nguyen, Anh FPT Software AI Center Viet Nam Department of Computer Science University of Liverpool United Kingdom University of Information Technology HCMC Viet Nam Automation & Control Institute TU Wien Austria Department of Creative Informatics The University of Tokyo Japan

Robot design is a complex and time-consuming process that requires specialized expertise. Gaining a deeper understanding of robot design data can enable various applications, including automated design generation, retrieving example designs from text, and developing AI-powered design assistants. While recent advancements in foundation models present promising approaches to addressing these challenges, progress in this field is hindered by the lack of large-scale design datasets. In this paper, we introduce RoboDesign1M, a large-scale dataset comprising 1 million samples. Our dataset features multimodal data collected from scientific literature, covering various robotics domains. We propose a semi-automated data collection pipeline, enabling efficient and diverse data acquisition. To assess the effectiveness of RoboDesign1M, we conduct extensive experiments across multiple tasks, including design image generation, visual question answering about designs, and design image retrieval. The results demonstrate that our dataset serves as a challenging new benchmark for design understanding tasks and has the potential to advance research in this field. RoboDesign1M will be released to support further developments in AI-driven robotic design automation. © 2025, CC BY-NC-ND.

关键词： Machine design

来源：评论

学校读者我要写书评

暂无评论

Constraining Depth Map Geometry for Multi-View Stereo: A Dual-Depth Approach with Saddle-shaped Depth Cells

Constraining Depth Map Geometry for Multi-View Stereo: A Dua...

引用

International Conference on computer Vision (ICCV)

作者： Xinyi Ye Weiyue Zhao Tianqi Liu Zihao Huang Zhiguo Cao Xin Li Key Laboratory of Image Processing and Intelligent Control Ministry of Education School of Artificial Intelligence and Automation Huazhong University of Science and Technology Wuhan China Department of Computer Science University of Albany Albany NY

Learning-based multi-view stereo (MVS) methods deal with predicting accurate depth maps to achieve an accurate and complete 3D representation. Despite the excellent performance, existing methods ignore the fact that a suitable depth geometry is also critical in MVS. In this paper, we demonstrate that different depth geometries have significant performance gaps, even using the same depth prediction error. Therefore, we introduce an ideal depth geometry composed of Saddle-Shaped Cells, whose predicted depth map oscillates upward and downward around the ground-truth surface, rather than maintaining a continuous and smooth depth plane. To achieve it, we develop a coarse-to-fine framework called Dual-MVSNet (DMVSNet), which can produce an oscillating depth plane. Technically, we predict two depth values for each pixel (Dual-Depth), and propose a novel loss function and a checkerboard-shaped selecting strategy to constrain the predicted depth geometry. Compared to existing methods, DMVSNet achieves a high rank on the DTU benchmark and obtains the top performance on challenging scenes of Tanks and Temples, demonstrating its strong performance and generalization ability. Our method also points to a new research direction for considering depth geometry in MVS.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Classification-Detection of Medical Images by Visualizing Hidden-Layer Features of a Deep Learning Approach 12th

Classification-Detection of Medical Images by Visualizing Hi...

引用

12th International Conference on computer Engineering and Networks, CENet 2022

作者： Tong, Ziyu Deng, Xing Shao, Haijian Wang, Xia School of Computer Jiangsu University of Science and Technology Zhenjiang212003 China School of Automation Key Laboratory of Measurement and Control for CSE Ministry of Education Southeast University Nanjing Jiangsu210096 China School of Information Science and Technology Nantong University Nantong Jiangsu226019 China Department of Electrical and Computer Engineering National University of Singapore Singapore117583 Singapore

ISBN: (纸本)9789811969003

Deep learning algorithms, such as CNN, have been widely used on a variety of computer vision problems due to their powerful capacity to extract nonlinear features for medical picture analysis. However, due to the decreased identification rate for medical images, CNNs continue to fail to offer an interpretable depiction of the hidden-layers’ features. Furthermore, the enormous amount of redundant parameters from the convolutional to fully connected layers will surely add to the computational complexity. This work provides a set of fast deep learning architectures for visualizing and analyzing hidden-layer properties in medical images. The clustered feature map is used to simplify the model parameters and minimize redundancy parameters in order to meet the goal of a streamlined trade-off between model performance and architecture. The testing results on the medial images reveal that 41% of redundant channels may be removed while 100% of performance can be preserved. © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

关键词： Deep learning

来源：评论

学校读者我要写书评

暂无评论

FISS GAN:A Generative Adversarial Network for Foggy Image Semantic Segmentation

引用

IEEE/CAA Journal of Automatica Sinica 2021年第8期8卷 1428-1439页

作者： Kunhua Liu Zihao Ye Hongyan Guo Dongpu Cao Long Chen Fei-Yue Wang School of Computer Science and Engineering Sun Yat-sen UniversityGuangzhou 510006China State Key Laboratory of Automotive Simulation and Control and the Department of Control Science and Engineering Jilin University(Campus Nanling)Changchun 130025China Mechanical and Mechatronics Engineering Department at the University of Waterloo 200 University Avenue West WaterlooON N2L 3G1Canada State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of SciencesBeijing 100190 Institute of Systems Engineering Macao University of Science and TechnologyMacao 999078China

Because pixel values of foggy images are irregularly higher than those of images captured in normal weather(clear images),it is difficult to extract and express their *** method has previously been developed to directly explore the relationship between foggy images and semantic segmentation *** investigated this relationship and propose a generative adversarial network(GAN)for foggy image semantic segmentation(FISS GAN),which contains two parts:an edge GAN and a semantic segmentation *** edge GAN is designed to generate edge information from foggy images to provide auxiliary information to the semantic segmentation *** semantic segmentation GAN is designed to extract and express the texture of foggy images and generate semantic segmentation *** on foggy cityscapes datasets and foggy driving datasets indicated that FISS GAN achieved state-of-the-art performance.

关键词： Edge GAN foggy images foggy image semantic segmentation GAN semantic segmentation

来源：评论

学校读者我要写书评

暂无评论

Stochastic process-based degradation modeling and RUL prediction: from Brownian motion to fractional Brownian motion

引用

science China(Information sciences) 2021年第7期64卷 5-24页

作者： Hanwen ZHANG Maoyin CHEN Jun SHANG Chunjie YANG Youxian SUN School of Automation and Electrical Engineering University of Science and Technology Beijing State Key Laboratory of Industrial Control Technology College of Control Science and EngineeringZhejiang University Department of Automation Tsinghua University School of Automation and Electrical Engineering Linyi University Department of Electrical and Computer Engineering University of Alberta

Brownian motion(BM) has been widely used for degradation modeling and remaining useful life(RUL) prediction, but it is essentially Markovian. This implies that the future state in a BM-based degradation process relies only on its current state, independent of the past states. However, some practical industrial devices such as Li-ion batteries, ball bearings, turbofans, and blast furnace walls show degradations with long-range dependence(LRD), where the future degradation states depend on both the current and past degradation states. This type of degradation naturally brings two interesting problems, that is, how to model the degradations and how to predict their RULs. Recently, in contrast to the work that uses only BM, fractional Brownian motion(FBM) is introduced to model practical degradations. The most important feature of the FBM-based degradation models is the ability to characterize the non-Markovian degradations with LRD. Although FBM is an extension of BM, it is neither a Markovian process nor a semimartingale. Therefore, how to obtain the first passage time of an FBM-based degradation process has become a challenging task. In this paper, a review of the transition of RUL prediction from BM to FBM is provided. The peculiarities of FBM when addressing the LRD inherent in some practical degradations are discussed. We first review the BM-based degradation models of the past few decades and then give details regarding the evolution of FBM-based research. Interestingly, the existing BM-based models scarcely consider the effect of LRD on the prediction of RULs. Two practical cases illustrate that the newly developed FBMbased models are more generalized and suitable for predicting RULs than the BM-based models, especially for degradations with LRD. Along with the direction of FBM-based RUL prediction, we also introduce some important and interesting problems that require further study.

关键词： remaining useful life degradation model Brownian motion fractional Brownian motion long-range dependence

来源：评论

学校读者我要写书评

暂无评论

A Deep Learning Approach For Faults Recognition of Dissolved Oxygen Sensor in Wastewater Treatment Plants

A Deep Learning Approach For Faults Recognition of Dissolved...

引用

International Conference on Emerging Technologies and Factory automation (ETFA)

作者： Liliana Maria Ghinea Mihaela Miron Harsha Ratnaweera Department of Automatic Control and Electrical Engineering Department Faculty of Automation Computers Electrical Engineering and Electronics Galați Romania Department of Computer Science and Information Technology Faculty of Automation Computers Electrical Engineering and Electronics Galați Romania Faculty of Science and Technology Norwegian University of Life Sciences Oslo Norway

Fault diagnosis in wastewater treatment plants (WWTPs) is important to protect communities and ecosystems from toxic elements discharged into water. In this sense, fault identification of sensors plays an important role as they are the key components of the water plants control, especially because environmental legislation is very strict when referring to failures or anomalies in WWTPs. This paper analyzes the performances of two Deep Learning models, a Feedforward Neural Network (FFNN) and a 1D Convolution Neural Network (1DCNN) for identifying five operating states of the dissolved oxygen (DO) sensor: normal and faulty (bias, stuck, spike and precision degradation faults). The experiments were conducted on the Benchmark Simulator Model No 2 (BSM2) developed by the IWA Task Group. The performance of the Deep Learning (DL) classifiers was evaluated via accuracy, precision, recall, and F1-score metrics. The best overall classification accuracy was obtained by FFNN, 98.32% for training and 98.30% for testing.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Toward parallel intelligence: An interdisciplinary solution for complex systems

引用

The Innovation 2023年第6期4卷 152-164页

作者： Yong Zhao Zhengqiu Zhu Bin Chen Sihang Qiu Jincai Huang Xin Lu Weiyi Yang Chuan Ai Kuihua Huang Cheng He Yucheng Jin Zhong Liu Fei-Yue Wang College of Systems Engineering National University of Defense TechnologyChangsha 410073China Hunan Institute of Advanced Technology Changsha 410073China Shanghai Institute of Infectious Disease and Biosecurity Shanghai 200032China Institute of Epidemiology Helmholtz Zentrum Minchen-German Research Center for Environmental Health(GmbH)NeuherbergGermany Department of Computer Science Hong Kong Baptist UniversityHong KongChina State Key Laboratory for Management and Control of Complex Systems Institute of AutomationChinese Academy of SciencesBeijing 100190China

The growing complexity of real-world systems necessitates interdisciplinary solutions to confront myriad challenges in modeling,analysis,management,and *** meet these demands,the parallel systems method rooted in the artificial systems,computational experiments,and parallel execution(ACP)approach has been *** method cultivates a cycle termed parallel intelligence,which iteratively creates data,acquires knowledge,and refines the actual *** the past two decades,the parallel systems method has continuously woven advanced knowledge and technologies from various disciplines,offering vers atile interdisciplinary solutions for complex systems across diverse *** review explores the origins and fundamental concepts of the parallel systems method,showcasing its accomplishments as a diverse array of parallel technologies and applica-tions while also prognosticating potential *** posit that this method will considerably augment sustainable development while enhancing interdisciplinary communication and cooperation.

关键词： execution artificial offering

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：