检索结果-内蒙古大学图书馆

15th biomedical engineering International Conference, BMEiCON 2023

作者： Uthayaphamornwat, Vilasinee Khantachawana, Anak Kitiwan, Mettaya Srirussamee, Kasama Tunthawiroon, Phacharaphon School of Engineering Department of Biomedical Engineering Bangkok10520 Thailand Faculty of Engineering Department of Mechanical Engineering Bangkok10140 Thailand Biological Engineering Program Faculty of Engineering Bangkok10140 Thailand School of Science Department of Physics Bangkok10520 Thailand Devices and Systems for Energy and Environment Research Unit School of Science Bangkok10520 Thailand School of Engineering Department of Industrial Engineering Bangkok10520 Thailand

ISBN: (纸本)9798350345247

Hydroxyapatite (HA) is one of the potential biomaterials used for treating dental defects. It can be incorporated with fluoride to enhance its anti-caries properties, though other properties could be dependent on processing technique. Hence, this study aims to characterize the influence of sintering on the properties of fluoride-added HA derived from eggshells. FTIR and XRD techniques are used to characterize the chemical and crystal structures of the samples, whilst dissolution test is carried out to characterize material degradation in the acidic environment. The results show that sintering increased the crystallinity in both HA and fluoride-add HA (F-HA) samples, which corresponds with the enhanced stability during the dissolution test. Moreover, it is also found that the addition of fluoride could further stabilize the material structure, though the impurities found in all the samples still need to be minimized. These findings suggest that sintering and fluoride addition could potentially enhance anti-caries properties of eggshell-derived HA, which could be beneficial for dental application in future subject to further process optimization and analysis. © 2023 IEEE.

关键词： Hydroxyapatite

来源：评论

学校读者我要写书评

暂无评论

Polyetheretherketone (PEEK) Implant Functionalization with Magnetron-Sputtered SrTiO3 for Regenerative Medicine

引用

Plasma Medicine 2023年第3期13卷 53-67页

作者： Harumningtyas, Anjar Anggraini Ito, Tomoko Ikuta, Masato Kaito, Takashi Hamaguchi, Satoshi International Priority Graduate Program on Applied and Engineering Physics Division of Precision Engineering and Applied Physics Osaka University Osaka Japan Yogyakarta Indonesia Division of Materials and Manufacturing Science Graduate School of Engineering Osaka University Osaka Japan Department of Orthopaedic Surgery Osaka University Graduate School of Medicine Osaka Japan

Polyetheretherketone (PEEK) is a polymer widely used for artificial bone implants but exhibits a low affinity for bone tissue and lacks osteoconductivity and osseointegration. Because strontium (Sr) is known to enhance bone growth, PEEK implants coated with strontium titanate [SrTiO3 (STO)] are expected to improve the bone growth around them. In this study, STO was deposited on model PEEK implants by magnetron sputtering deposition and its ability to release Sr2+ ions to a surrounding phosphate-buffered saline (PBS) solution was examined. It was found that, in the early stage of the deposition process, STO on a PEEK surface exhibits irregular surface structures with many holes. The amount of Sr stored in the STO film increases with the increasing film thickness but the release rate of Sr2+ ions from the STO film to the surrounding PBS also increases with the film thickness, limiting the duration of effectiveness of the STO-coated PEEK films. It was found, however, that a three-layer titanium (Ti)-STO-Ti film deposited on PEEK allows a steady release of Sr2+ ions to the surrounding PBS for an extended period. © 2023 by Begell House, Inc. ***.

关键词： Titanium compounds

来源：评论

学校读者我要写书评

暂无评论

High-throughput design of perpendicular magnetic anisotropy at quaternary Heusler and MgO interfaces

引用

npj Computational materials 2023年第1期9卷 1084-1091页

作者： Sicong Jiang Kesong Yang Department of Nano and Chemical Engineering University of California San DiegoLa JollaCA 92093-0448USA Program of Materials Science and Engineering University of California San DiegoLa JollaCA 92093-0418USA Center for Memory and Recording Research University of California San DiegoLa JollaCA 92093-0401USA

Heusler alloys combined with MgO interfaces exhibit interfacial perpendicular magnetic anisotropy, making them attractive forenergy-efficient spintronic technologies. However, finding suitable Heusler/MgO heterostructures with desired properties ischallenging due to the vast range of compositions available and the complexity of interfacial structures, particularly for theemerging quaternary Heusler compounds. In this study, we report a high-throughput screening of quaternary-Heusler/MgOheterostructures for spintronic applications. By analyzing various materials descriptors, including formation energy, convex hulldistance, magnetic ordering, lattice misfit, magnetic anisotropy constant, tunnel magnetoresistance, Curie temperature, and atomicsite disordering, we identified 5 promising compounds out of 27,000 quaternary Heusler compounds. These compounds, namelyIrCrAlTi, IrCrGaTi, IrMnZnTi, OsCrAlTa, and TaGaOsCr, show potential for designing energy-efficient perpendicular magnetic tunneljunctions. This work demonstrates an efficient approach using open quantum materials repositories, effective materials descriptors,and high-throughput computational techniques to accelerate the discovery of quaternary-Heusler-based functional materials.

关键词： quaternary anisotropy magnetic

来源：评论

学校读者我要写书评

暂无评论

Reusable Hydrogen Storage Tank with Flange Design 10

Reusable Hydrogen Storage Tank with Flange Design

引用

10th International Conference on Applied System Innovation, ICASI 2024

作者： Li, Yun-Qi Chen, Hsuan-Jung Yang, Hsi-Wen Chen, Chih-Yuan Chang, Shao-Fu Chen, Ssu-Ying Chen, Chien-Chon College of Engineering and Science Ph.D. Program in Materials and Chemical Engineering National United University Miaoli Taiwan Michigan State University Department of Chemistry MI48824 United States National United University Department of Materials Engineering Miaoli Taiwan Graduate Institute of Intellectual Property National Taipei University of Technology Taiwan National United University Department of Energy Engineering Miaoli Taiwan

ISBN: (纸本)9798350394924

For how to store and transport hydrogen, the first thought is to store hydrogen directly in the cylinder. However, this method is not desirable, because generally at least 700 atm high pressure, the hydrogen contained in the cylinder to be useful. Therefore it is very unsafe at such high pressures. In This paper, we design and production of a new generation of solid-state hydrogen storage and discharge container. The goal of 'development of solid-state hydrogen storage technology' is to break through the bottlenecks of hydrogen storage technology safety, hydrogen storage density, high-efficiency hydrogen absorption and release, transportation safety, and engineering practice. © 2024 IEEE.

关键词： Aluminum

来源：评论

学校读者我要写书评

暂无评论

Hierarchical CuO-ZnO/SiO_(2) Fibrous Membranes for Efficient Removal of Congo Red and 4‑Nitrophenol from Water

引用

Advanced Fiber materials 2022年第5期4卷 1069-1080页

作者： Caihong Wang Ke Liu Dong Wang Guomin Wang Paul KChu Zheyi Meng Xuefen Wang State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of Material Science and EngineeringDonghua UniversityShanghai 201620China Key Laboratory of Textile Fiber and Products Ministry of EducationHubei International Scientific and Technological Cooperation Base of Intelligent Textile Materials and ApplicationWuhan Textile UniversityWuhan 430200China Department of Physics Department of Materials Science and Engineeringand Department of Biomedical EngineeringCity University of Hong KongHong Kong 999077China

Hierarchical CuO-ZnO/SiO_(2)(CZS)nanofibrous membranes are designed and fabricated to remove Congo red and 4-nitro-phenol two common small molecular pollutants in *** electrospun SiO_(2) fibrous membrane is serves as the substrate for hydrothermal depositing CuO-ZnO *** CZS nanofibrous membrane shows good adsorption characteristics for Congo red due to the hierarchical morphology and the adsorption kinetics where isotherm follows the pseudo-second-order model and Langmuir model,*** maximum adsorption capacity for Congo red is 141.8 mg/***,the membrane exhibits excellent catalytic reduction activity for 4-nitrophenol under mild conditions and over 96%of the pollut-ants are degraded within 90 *** CZS nanofibrous membrane has promising prospects in applications in water treatment and environmental protection because of the good flexibility,easy fabrication,excellent adsorption,and catalytic activity.

关键词： Hierarchical nanofibrous membranes Hydrothermal deposition Electrospun inorganic membranes Pollutant adsorption Catalytic degradation

来源：评论

学校读者我要写书评

暂无评论

Development of High Temperature Lead-free Solders in the Al-95Zn + xSn Systems

Development of High Temperature Lead-free Solders in the Al-...

引用

22nd International Conference on Electronics Packaging, ICEP 2023

作者： Laksono, Andromeda Dwi Yen, Yee-Wen National Taiwan University of Science and Technology Department of Materials Science and Engineering Taipei10672 Taiwan Institut Teknologi Kalimantan Study Program of Materials and Metallurgical Engineering East Kalimantan Balikpapan76127 Indonesia

ISBN: (纸本)9784991191152

The high-temperature lead-free solder alloys of Al-95Zn with the modification of the addition of Sn have been investigated. Its proportion is used to adjust the metallographic microstructure, solidified precipitate phase, and liquidus temperature of the solder alloy. The characterization results, such as scanning electron microscope (SEM), energy dispersive spectrometer (EDS), X-ray diffraction (XRD), and differential scanning calorimeter (DSC), will be discussed in this study. The study results show that the Al-Sn-Zn-based alloy has (Zn)+β- Sn+(Al) precipitates when heat-treated at 900°C for 36 h. Its liquidus temperature of Al-95Zn + xSn is between 342-385°C, and increased Sn content will decrease its liquidus temperature. © 2023 Japan Institute of Electronics Packaging.

关键词： Zinc alloys

来源：评论

学校读者我要写书评

暂无评论

Strengthening Mechanism of Cold-Rolled Co-Based Super Alloy for Diaphragm Valves under Room Temperature Tensile Loading

Journal of Korean Institute of Metals and Materials

引用

Journal of Korean Institute of Metals and materials 2025年第5期63卷 319-329页

作者： Park, Jung-Hyun Song, Noh-Geon Choi, Jae-Ho Kang, Doo-Hong Lee, Kee-Ahn Department of Materials Science and Engineering Inha University Incheon22212 Korea Republic of Program in Semiconductor Convergence Inha University Incheon22212 Korea Republic of CN-1 Corp. Hwaseong18487 Korea Republic of Asflow Corp Hwaseong18514 Korea Republic of

Cold-rolled Co-Cr-Ni alloy (Elgiloy) and Co-Ni-Cr alloy (SPRON 510) can be considered for diaphragm valve materials in gas valve systems. In this study, the effect of direct aging (DA) heat treatment on the tensile properties of Co-based alloys was investigated and the influence of microstructural changes on the tensile behavior was examined. The Co-Cr-Ni Elgiloy alloy exhibited a hexagonal close packed (HCP) phase formation through strain induced martensite transformation (SIMT) in both as-rolled and DA conditions, promoting finer grains due to increased sub-structured and recrystallized grains. In contrast, the Co-Ni-Cr SPRON 510 alloy showed a face centered cubic (FCC) single phase with a higher precipitates fraction and dislocation density. Both Co-based alloys showed improved hardness and strength after DA treatment, with the Co-Cr-Ni alloy demonstrating higher tensile strength and the Co-Ni-Cr alloy exhibiting higher yield strength and elongation. The Co-Cr-Ni alloy revealed fine shallow dimples and cleavage fracture mode, while Co-Ni-Cr showed larger dimples and river patterns on tensile fracture surfaces. The Co-Cr-Ni alloy’s deformation behavior was dominated by active SIMT due to low stacking fault energy (SFE), while the Co-Ni-Cr alloy primarily formed deformation twins due to higher SFE. The high tensile strength of the Co-Cr-Ni alloy was dominated by hardening effects due to a relatively fine grain size and SIMT behavior, while the high yield strength of the Co-Ni-Cr alloy was dominated by deformation twin, dislocation density, Taylor factor and high precipitate fraction. Copyright © The Korean Institute of Metals and materials.

关键词： Tensile strength

来源：评论

学校读者我要写书评

暂无评论

Mitochondria-specific near-infrared photoactivation of peroxynitrite upconversion luminescent nanogenerator for precision cancer gas therapy

引用

Acta Pharmaceutica Sinica B 2024年第1期14卷 378-391页

作者： Hui Yu Aliya Tiemuer Xufeng Yao Mingyuan Zuo Hai-Yan Wang Yi Liu Xiaoyuan Chen Department of Biomedical Engineering School of EngineeringChina Pharmaceutical UniversityNanjing 211198China School of Mechanical Engineering Southeast UniversityNanjing 211189China Departments of Diagnostic Radiology SurgeryChemical and Biomolecular Engineeringand Biomedical EngineeringYong Loo Lin School of Medicine and College of Design and EngineeringNational University of SingaporeSingapore 119074Singapore Clinical Imaging Research Centre Centre for Translational MedicineYong Loo Lin School of MedicineNational University of SingaporeSingapore 117599Singapore Nanomedicine Translational Research Program Yong Loo Lin School of MedicineNational University of SingaporeSingapore 117597Singapore Institute of Molecular and Cell Biology Agency for ScienceTechnologyand Research(A*STAR)ProteosSingapore 138673Singapore

Gas therapy is emerging as a highly promising therapeutic strategy for cancer ***,there are limitations,including the lack of targeted subcellular organelle accuracy and spatiotemporal release precision,associated with gas *** this study,we developed a series of photoactivatable nitric oxide(NO)donors NRh-R-NO(R=Me,Et,Bn,iPr,and Ph)based on an N-nitrosated upconversion luminescent rhodamine *** the irradiation of 808 nm light,only NRh-Ph-NO could effectively release NO and NRh-Ph with a significant turn-on frequency upconversion luminescence(FUCL)signal at 740 nm,ascribed to lower N-N bond dissociation *** also investigated the involved multistage near-infrared-controlled cascade release of gas therapy,including the NO released from NRh-Ph-NO along with one NRh-Ph molecule generation,the superoxide anion O_(2)^(⋅−)produced by the photodynamic therapy(PDT)effect of NRh-Ph,and highly toxic peroxynitrite anion(ONOO‒)generated from the co-existence of NO and O_(2)^(⋅−).After mild nano-modification,the nanogenerator(NRh-Ph-NO NPs)empowered with superior biocompatibility could target *** an 808 nm laser irradiation,NRh-Ph-NO NPs could induce NO/ROS to generate RNS,causing a decrease in the mitochondrial membrane potential and initiating apoptosis by caspase-3 activation,which further induced tumor immunogenic cell death(ICD).In vivo therapeutic results of NRh-Ph-NO NPs showed augmented RNS-potentiated gas therapy,demonstrating excellent biocompatibility and effective tumor inhibition guided by real-time FUCL ***,this versatile strategy defines the targeted RNS-mediated cancer therapy.

关键词： Near infrared Photo-triggered Mitochondrion Upconversion luminescent bioimaging Peroxynitrite Nanogenerator Gas therapy In vivo

来源：评论

学校读者我要写书评

暂无评论

WE43 Surface Composite with Oxide Particles by Friction Stir Processing

WE43 Surface Composite with Oxide Particles by Friction Stir...

引用

Magnesium Technology Symposium, 2025, held as part of the TMS Annual Meeting and Exhibition, TMS 2025

作者： Ghauri, Hamza Faisal Shunmugasamy, Vasanth C. Mansoor, Bilal Department of Materials Science and Engineering Texas A&M University College StationTX77840 United States Mechanical Engineering Program Texas A&M University at Qatar Doha Qatar Department of Mechanical Engineering Texas A&M University College StationTX77840 United States

ISBN: (纸本)9783031810602

WE43WE43 has superior mechanical and corrosionCorrosion performance compared to other magnesium alloysMagnesium alloy but surface treatments, mechanical processes, and heat treatments to further enhance its properties continue to be explored. Here we present our preliminary findings about a WE43WE43surface compositeSurface composite with oxide particles produced using friction stir processingFriction stir processing. Significant grain refinement, precipitate redistribution, and increase in microhardness by 25% were achieved in processed regions compared to base material. CorrosionCorrosion testing in 0.9% NaCl solution revealed that the FSP-treated material exhibited a 196% lower Icorr and a more stable open circuit potential (OCP) than cast WE43WE43, suggesting superior corrosion resistanceCorrosion resistance. While the findings promise suitability of the processed alloy for a more intensive range of operating conditions than the cast alloy, further work to study the effect of the size, volume, and composition of the oxide reinforcements needs to be carried out. © The Minerals, Metals & materials Society 2025.

关键词： Grain refinement

来源：评论

学校读者我要写书评

暂无评论

New muonic He atom HFS measurements at J-PARC MUSE

引用

Interactions 2024年第1期245卷 1-6页

作者： Goto, Yu Fukumura, Seiso Strasser, Patrick Ino, Takashi Iwai, Ryoto Kanda, Sohtaro Kawamura, Shiori Kitaguchi, Masaaki Nishimura, Shoichiro Oku, Takayuki Okudaira, Takuya Shimizu, Hirohiko M. Shimomura, Koichiro Tada, Hiroki Torii, Hiroyuki A. Department of Physics Nagoya University Nagoya Japan Tsukuba Japan Materials and Life Science Division J-PARC Center Tokai Japan Materials Structure Science Program Graduate Institute for Advanced Studies SOKENDAI Tsukuba Japan Kobayashi-Maskawa Institute Nagoya University Nagoya Japan Tokai Japan Graduate School of Science and Engineering Ibaraki University Mito Japan School of Science The University of Tokyo Tokyo Japan

Muonic He (μHe) is a hydrogen-like atom composed of a helium atom with one of its electrons replaced by a negative muon. Measurements of the ground-state hyperfine structure (HFS) interval of the μHe atom is a sensitive tool to test the three-body atomic system, bound-state quantum electrodynamics (QED) theory, and determine fundamental constants of the negative muon magnetic moment and mass. It allows a test of the CPT theorem in muons by comparing these constants with positive muons. Precise measurements of the ground-state HFS interval using a microwave magnetic resonance technique are now in progress at J-PARC by the MuSEUM collaboration. Furthermore, a new experimental approach to recover the muon polarization lost during the muon cascade process is being investigated by repolarizing μHe atoms using a spin-exchange optical pumping (SEOP) technique. The first laser repolarization experiment was recently performed. An overview of the different features of these new μHe atom HFS measurements and the latest results are presented. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2024.

关键词： Atoms

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：