检索结果-内蒙古大学图书馆

Metallic Sb-stabilized porous silicon with stable SEI and high electron/ion conductivity boosting lithium-ion storage performance

引用

Rare Metals 2024年第9期43卷 4234-4242页

作者： Jia-Guo Deng Hao-Qin Feng Yu-Long Xu Si-Guang Guo Jian-Ping Li Kai-Fu Huo Ji-Jiang Fu Biao Gao Pual-K.Chu The State Key Laboratory of Refractories and Metallurgy and Institute of Advanced Materials and Nanotechnology Wuhan University of Science and TechnologyWuhan 430081China Wuhan National Laboratory for Optoelectronics(WNLO) School of Optical and Electronic InformationHuazhong University of Science and TechnologyWuhan 430074China Department of Physics Department of Materials Science&Engineeringand Department of Biomedical EngineeringCity University of Hong KongHong Kong 999077China

Silicon(Si)has mild discharge potential and high theoretical capacity,making it a highly desirable material for lithium-ion batteries(LIBs).Nevertheless,the excessive volume expansion,poor ion/electron conductiv ity and unstable solid electrolyte interface(SEI)hinde practical application to ***,the metallic antimony(Sb)stabilized porous Si(SiDSb)composite was prepared by magnesiothermic reduction of Sb_(2)O_(3)and Mg_(2)Si and chemical etching to remove the by-product of *** highly conductive Sb nanodots embedded in the Si liga ments promote not only the formation of conductive and stable LiF-rich SEI,but also the electron/ion transpor ability of *** to the outstanding bulk/interface stability,excellent conductivity,as well as ideal porous structure,the SiDSb electrode demonstrates a capacity of820 mAh·g^(-1)after undergoing 320 turns at 1000 mA·g^(-1).Additionally,it exhibits a stable capacity of 675 m Ah·g^(-1)when tested at a higher current density of 5000 m A·g^(-1).The results reveal a viable solution to solve three problems at the same time,namely the poor conductivity,inferior SEI and excessive volume expansion of Si,boding well for the design of Si-based materials for high-energy LIBs.

关键词： Silicon Anodes Lithium-ion batteries Antimony Solid electrolyte interphase

来源：评论

学校读者我要写书评

暂无评论

materials property mapping from atomic scale imaging via machine learning based sub-pixel processing

引用

npj Computational materials 2022年第1期8卷 1868-1876页

作者： Junghun Han Kyoung-June Go Jinhyuk Jang Sejung Yang Si-Young Choi Department of Biomedical Engineering Yonsei UniversityWonju26493Republic of Korea Department of Materials Science and Engineering Pohang University of Science and TechnologyPohang37673Republic of Korea

Direct visualization of the atomic structure in scanning transmission electron microscopy has led to a comprehensive understanding of the structure-property ***,a reliable characterization of the structural transition on a picometric scale is still challenging because of the limited spatial resolution and ***,we demonstrate that the primary segmentation of atomic signals from background,succeeded by a denoising process,enables structural analysis in a sub-pixel *** noise is eliminated using the block matching and three-dimensional filtering with Anscombe transformation,and remnant noise is removed via morphological filtering,which results in an increase of peak signal-to-noise ratio from 7 to 11 *** the centroids of atomic columns segmented via K-means clustering,an unsupervised method for robust thresholding,achieves an average error of less than 0.7 pixel,which corresponds to 4.6 *** study will contribute to a profound understanding of the local structural dynamics in crystal structures.

关键词： property filtering removed

来源：评论

学校读者我要写书评

暂无评论

Effect of linear friction welding process on microstructure evolution,mechanical properties and corrosion behavior of GH4169 superalloy

引用

Chinese Journal of Aeronautics 2024年第6期37卷 504-520页

作者： Yu SU Xiawei YANG Tingxi MENG Dong WU Rui XU Haiyu XU Wenya LI Shuo YIN State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Department of Mechanical Manufacturing&Biomedical EngineeringParsons BuildingTrinity College DublinThe University of DublinDublin 2Ireland

Linear Friction Welding(LFW)technology was used to realize the welding of GH4169 superalloy,and the effect of welding parameters on the microstructure,mechanical properties and corrosion behavior of the joint was *** results show that there is a positive correlation between the weld hardness and the tensile *** the gradual increase of heat input and welding pressure,the joint quality is gradually improved,but the heat affected zone is not significantly *** smaller the grain size of the weld,the higher the strength and plasticity of the *** the increase of the joint shortening amount,the corrosion resistance of the weld first gradually ***,when the shortening reaches a certain level,the corrosion resistance of the joint becomes little *** the increase of solution temperature,the corrosion current density increases and the polarization impedance *** higher the corrosion temperature,the worse the corrosion resistance of the *** is no significant correlation between the joint strength and the corrosion *** corrosion resistance of the joint can be enhanced without changing the joint mechanical properties by reducing the welding frequency and amplitude or increasing the welding pressure.

关键词： Linear Friction Welding(LFW) GH4169 superalloy Microstructure Mechanical properties Corrosion behavior

来源：评论

学校读者我要写书评

暂无评论

Recent advances on the systems metabolically engineered Pseudomonas species as versatile biosynthetic platforms for the production of polyhydroxyalkanoates

引用

Systems Microbiology and Biomanufacturing 2024年第2期4卷 473-499页

作者： Hye Min Song Seo Young Jo Haeyoung Lee Subeen Jeon Dohye Yun Chaerin Kim Jina Son Yu Jung Sohn Jong-Il Choi Si Jae Park Department of Chemical Engineering and Materials Science Graduate Program in System Health Science and EngineeringEwha Womans UniversitySeoul 03760Republic of Korea Department of Biotechnology and Bioengineering Chonnam National UniversityGwangju 61186Republic of Korea

Pseudomonas *** been considered one of the most promising microbial platform strains due to its versatile metabolism,enabling the valorization of waste materials into value-added chemical *** the native producer of polyhydroxyal-kanoates(PHAs),the biodegradable biopolyesters,it has been widely engineered by various metabolic engineering tools for the production of PHAs composed of short-chain-length and medium-chain-length monomers with adjustable composition from diverse carbon sources,ranging from pure sugars to crude oils and fatty *** review discusses the feasibility of Pseudomonas *** the industrial host strain and the recent advances regarding the systems metabolic engineering strategies for PHAs production in Pseudomonas sp.

关键词： Pseudomonas sp. Polyhydroxyalkanoates Systems metabolic engineering Synthetic biology Fermentation

来源：评论

学校读者我要写书评

暂无评论

Research on GGT-responsive drug carrier with active transport effect

引用

Nano Research 2023年第5期16卷 7075-7084页

作者： Han Yan He Ma Bin He Bing Yu Youqing Shen Hailin Cong Institute of Biomedical Materials and Engineering College of Materials Science and EngineeringCollege of Chemistry and Chemical EngineeringQingdao UniversityQingdao 266071China State Key Laboratory of Bio-Fibers and Eco-Textiles Qingdao UniversityQingdao 266071China Key Laboratory of Biomass Chemical Engineering of Ministry of Education Center for BionanoengineeringDepartment of Chemical and Biological EngineeringZhejiang UniversityHangzhou 310027China School of Materials Science and Engineering Shandong University of TechnologyZibo 255000China

Although a great quantity research has been done on cancer nano-drug carriers,how to deliver more cancer nano-drugs to tumor sites accurately and then endocytosis by cells is still a key problem in the process of cancer *** the concentration ofγ-glutamyl transpeptidase(GGT)in the microenvironment will be greatly increased when the liver,kidney,other organs become cancerous,we have designed a polymer nanomicelle as drug carrier that can respond to the GGT in the tumor *** the drug delivery system participates in blood circulation through the vascular wall cells to the tumor tissue,the overexpressed GGT on the surface of the cancer cells will recognize and cut theγ-glutamyl group on the carrier,the primary amines will be released to make the system with weak positive charge,which not only improves the carrier’s active transport ability for nanodrugs,but also improves the cell’s endocytosis ability for nano-drugs,so as to realize the release of nano-drugs in cancer ***’s more,the positive charge on the surface of the carrier also improves the permeability of the carrier in the tumor tissue,so that the cancer cells in the hypoxic area can also endocytosis drugs.

关键词： micelles enzyme response active transport endocytosis

来源：评论

学校读者我要写书评

暂无评论

Wear Performance of a Novel Silicon Nitride Ceramic for biomedical Applications

引用

biomedical materials and Devices 2023年第2期1卷 990-999页

作者： Correa Filho, Luimar Fu, Le Engqvist, Håkan Xia, Wei Persson, Cecilia Division of Biomedical Engineering Department of Materials Science and Engineering Uppsala University Uppsala Sweden Division of Applied Materials Science Department of Materials Science and Engineering Uppsala University Uppsala Sweden School of Material Science and Engineering Central South University Changsha China

Ceramic materials are sometimes used as bearing surfaces of joint implants due to their high wear resistance and biocompatibility. Silicon nitride (Si3N4) is one of the ceramics under investigation for such use, owing... 详细信息

Ceramic materials are sometimes used as bearing surfaces of joint implants due to their high wear resistance and biocompatibility. Silicon nitride (Si₃N₄) is one of the ceramics under investigation for such use, owing to its bacteriostatic properties and high wear resistance. Traditional Si₃N₄ is sintered using Al₂O₃ and Y₂O₃ as sintering aids. To improve the biocompatibility and bioactivity of Si₃N₄, new sintering aids (SrO, MgO, and SiO₂) were used in this work. This substitution may however have substantial effects on the wear properties of the material. Hence, the aim of this study was to evaluate these effects. Multidirectional pin-on-disc wear tests against ultra-high molecular weight polyethylene pins were used to this end, running in fetal bovine serum solution at 37 °C for 2 million cycles. The surface roughness, phase composition, and surface morphology of the surfaces were investigated, together with the pH of the wear test lubricant and compared to a traditional Si₃N₄ composition. XRD and SEM results showed that the prepared ceramics were composed of α- and β-phase Si₃N₄. The surface roughness of the Si₃N₄ ceramic discs was in accordance with the biomedical standard, and the wear test results demonstrated that the new ceramics had a low wear factor and a comparable coefficient of friction to Si₃N₄ ceramics reported in previous work. However, the dissolution of the materials over time may be a concern for biotribological applications, such as long-term use or in other wear couples. © The Author(s) 2023.

关键词： Joint replacements Silicon nitride Spark plasma sintering Wear

来源：评论

学校读者我要写书评

暂无评论

Bioinspired design of integral molded Janus silk fibroin-MXene evaporator for efficient solar vapor generation

引用

Nano Research 2024年第4期17卷 2824-2835页

作者： Ling-Qing Kong Zhi-Cheng Zeng Guang-Zong Min Zhao-Hui Meng Guo-Qing Meng Xiao-Xiao Guo Nai-Bo Lin Xiang-Yang Liu The Higher Educational Key Laboratory for Biomedical Engineering of Fujian Province Research Center of Biomedical Engineering of XiamenDepartment of BiomaterialsCollege of MaterialsXiamen UniversityXiamen 361005China The State Key Laboratory of Marine Environmental Science(MEL) College of Ocean and Earth SciencesXiamen UniversityXiamen 361005China

Solar vapor generation is a promising sustainable technology that uses solar distillation to produce fresh water from seawater and wastewater,helping relieve global water resource ***,inspired by naturally grown integrally molded mulberry leaves with a Janus hydrophilic and hydrophobic structure,a novel,simple,and efficient integrated molding method is proposed to break through the limitations of the traditional split manufacturing strategy and realizes the integrated formation of Janus *** on the spontaneous sedimentation characteristics of MXene in silk fibroin solution and its regulation of mesoscopic structure and hydrophilicity of silk fibroin,layered structures with different compositions and hydrophilicities were obtained in one ***,ethanol and glutaraldehyde were added to construct a physical crystallization-chemical crosslinking dual stabilization structure in silk *** evaporator has the evaporation rate of 3.07 kg·m^(-2)·h^(-1) and the efficiency of 86.8%under 1 sun and maintains high evaporation performance under various extreme test conditions including vigorous washing,repeated compression,and high-intensity ultraviolet(UV)***,the evaporator performs well in practical application scenarios,its evaporation rate in the simulated Dead Sea seawater exceeds 2.13 kg·m^(-2)·h^(-1),and more than 99.9%of the salt,heavy metal ions,oil pollution,and dyes are purified.

关键词： silk fibroin MXene bioinspired integrated molding Janus structure solar vapor generation

来源：评论

学校读者我要写书评

暂无评论

Enhancing waste sorting and recycling efficiency: robust deep learning-based approach for classification and detection

引用

Neural Computing and Applications 2025年第6期37卷 4567-4583页

作者： Sayem, Faizul Rakib Islam, Md. Sakib Bin Naznine, Mansura Nashbat, Mohammad Hasan-Zia, Mazhar Kunju, Ali K Ansaruddin Khandakar, Amith Ashraf, Azad Majid, Molla Ehsanul Kashem, Saad Bin Abul Chowdhury, Muhammad E. H. Department of Electrical and Electronic Engineering University of Dhaka Dhaka Bangladesh Department of Biomedical Engineering Military Institute of Science and Technology Dhaka Bangladesh Department of Computer Science & Engineering Rajshahi University of Engineering & Technology Rajshahi6204 Bangladesh Chemical Engineering Department University of Doha for Science and Technology Doha Qatar Department of Electrical Engineering Qatar University Doha2713 Qatar Computer Applications Department Academic Bridge Program Qatar Foundation Doha Qatar Department of Computing Science AFG College With the University of Aberdeen Doha Qatar

Given the severity of waste pollution as a major environmental concern, intelligent and sustainable waste management is becoming increasingly crucial in both developed and developing countries. The material composition and volume of urban solid waste are key considerations in processing, managing, and utilizing city waste. Deep learning technologies have emerged as viable solutions to address waste management issues by reducing labor costs and automating complex tasks. However, the limited number of trash image categories and the inadequacy of existing datasets have constrained the proper evaluation of machine learning model performance across a large number of waste classes. In this paper, we present robust waste image classification and object detection studies using deep learning models, utilizing 28 distinct recyclable categories of waste images comprising a total of 10,406 images. For the waste classification task, we proposed a novel dual-stream network that outperformed several state-of-the-art models, achieving an overall classification accuracy of 83.11%. Additionally, we introduced the GELAN-E (generalized efficient layer aggregation network) model for waste object detection tasks, obtaining a mean average precision (mAP50) of 63%, surpassing other state-of-the-art detection models. These advancements demonstrate significant progress in the field of intelligent waste management, paving the way for more efficient and effective solutions. © The Author(s) 2024.

关键词： Deep learning for waste management Intelligent waste management Object detection in waste management Sustainable waste processing Urban solid waste Waste image classification

来源：评论

学校读者我要写书评

暂无评论

Variable Length Multi-Objective Whale Optimization for Trust Aware Data Gathering in Wireless Sensor Network

引用

IEEE Access 2025年 13卷 32100-32121页

作者： Saad, Mohammed Ayad Jaafar, Rosmina Chellappan, Kalaivani Faculty of Engineering and Built Environment Department of Electrical Electronics and System Engineering Selangor Bangi43600 Malaysia Al-Kitab University Department of Medical Instrumentations Technique Engineering Kirkuk36001 Iraq Universitas Airlangga Biomedical Engineering Study Program Faculty of Science and Technology Surabaya60115 Indonesia

Efficient data collection in wireless sensor networks (WSNs) is crucial. While traditional approaches rely on stationary data sinks, the use of mobile sinks, like unmanned aerial vehicles (UAVs), has shown promise in enhancing data-gathering capabilities. However, existing methods often overlook the importance of trust, leaving the network susceptible to malicious or faulty nodes. To address this issue, we propose a novel trust-aware data-gathering algorithm, Variable Length Multi-Objective Whale Optimization Data Gathering (VLMOWO-DG). Our algorithm simultaneously optimizes energy consumption, delay, and trust while employing mobile sinks to collect data from sensor nodes. By considering trust as a key performance metric, we improve data reliability and security. The VLMOWO-DG algorithm introduces flexibility through variable-length solution representation and application-oriented operators, allowing for efficient exploration of the solution space. Simulation results demonstrate that our proposed algorithm significantly outperforms established benchmarks, NSGA-II and NSGA-III, in terms of domination and hypervolume. This leads to a remarkable improvement of 200% in data gathering performance. © 2015 The Authors.

关键词： Data collection

来源：评论

学校读者我要写书评

暂无评论

Hydrogel-fiber-mesh-based 3D cell cultures: A new method for studying pituitary tumors

引用

Smart materials in Medicine 2024年第2期5卷 281-290页

作者： Jeong, Wooju Wang, Sungrok Kim, Yumin Lee, Soohyun Huang, Minhu Park, Jaeil Yoon, Myung-Han Oh, Chang-Myung Ku, Cheol Ryong Department of Biomedical Science and Engineering Gwangju Institute of Science and Technology Gwangju Korea Republic of School of Materials Science and Engineering Gwangju Institute of Science and Technology Gwangju Korea Republic of Department of Internal Medicine Severance Hospital Yonsei University College of Medicine Seoul Korea Republic of

Acromegaly is a challenging medical condition that arises from the excessive production of growth hormones and the insulin-like growth factor 1 in the pituitary gland. While surgery is the primary treatment for acromegaly, medication is increasingly being used in patients who are unsuitable for surgery or have experienced treatment failure. Despite advancements in medical and surgical therapies, the treatment of acromegaly remains challenging. In this research, a three-dimensional (3D) in-vitro cell culture model for pituitary adenoma research was developed using hydrogel fiber meshes (HFMs) and GH3 cells. Electrospun nanofibers based on polyvinyl alcohol and polyacrylic acid were converted into HFMs by hydrogelification with the leaching of electrosprayed cellulose acetate beads for porosity enhancement. GH3 cells grown in the 3D model exhibited increased dispersion and upregulation of the somatostatin receptor subtypes 2 and 5 compared to those grown in traditional 2D cultures, as well as high sensitivity to somatostatin analogs and tumor-like profiles (as indicated by functional assays and transcriptome analysis, respectively). Therefore, the proposed 3D model accurately represents the physiological response to pituitary-adenoma therapeutic agents. This study highlights the potential of HFMs as a versatile platform for 3D in-vitro cell culture models that can be employed for pituitary adenoma research. Moreover, the proposed 3D cell culture model may contribute to a deeper understanding of tumor biology and facilitate the development of effective therapeutic strategies for acromegaly. © 2024 The Authors

关键词： Cells

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：