检索结果-内蒙古大学图书馆

Initiation of dusting corrosion in high-temperature alloys under CO exposure

Acta Materialia 2025年 295卷

作者： Patel, Shyam Bharatkumar Wang, Jianyu Li, Chaoran Al-Mahboob, Abdullah Stacchiola, Dario Sadowski, Jerzy T. Zhou, Guangwen Department of Mechanical Engineering & Materials Science and Engineering Program State University of New York BinghamtonNY13902 United States Center for Functional Nanomaterials Brookhaven National Laboratory UptonNY11973 United States

Carbon monoxide is commonly encountered in energy systems, yet its reactivity with structural alloys—critical heat-resistant components in these systems—has been largely overlooked compared to the well-documented effects of oxidizing gases. In contrast, we demonstrate the high-temperature reaction of CO with NiAl using in-situ low-energy electron microscopy and X-ray photoemission electron microscopy. Our results show that CO dissociates into atomic oxygen and carbon, resulting in two concurrent reactions: selective oxidation of aluminum to form Al2O3 and the initiation of dusting corrosion through carbon dissolution into the alloy and subsequent carbon deposition on the surface. These reactions produce spatially distinct surface products, preventing the formation of a continuous protective Al oxide layer. These results reveal a preference for the dissociative pathway of CO over the classic Boudouard disproportionation reaction that forms CO2. These insights not only advance our understanding of CO-induced alloy degradation but also highlight the practical implications for managing alloy stability and optimizing catalysis in carbon-rich environments, such as those in petrochemical processing and hydrocarbon combustion. © 2025 Acta Materialia Inc.

关键词： Photodissociation

来源：评论

学校读者我要写书评

暂无评论

Modifying BiVO4 as a photocatalyst for water oxidation using constant-duration alkaline-etched post treatments

引用

New Journal of Chemistry 2023年第2期48卷 569-577页

作者： Hsu, Chuan-Chih Chuang, Kai-Jie Huang, Hsiao-Wen Pan, Bo-Jin Chen, Hung-Ming Husain, Sadang Yougbaré, Sibidou Hsiao, Yu-Cheng Wu, Yung-Fu Lin, Lu-Yin Division of Cardiovascular Surgery Department of Surgery School of Medicine College of Medicine Taipei Medical University Taiwan Division of Cardiovascular Surgery Department of Surgery Taipei Medical University Hospital Taiwan Department of Chemical Engineering and Biotechnology National Taipei University of Technology Taipei Taiwan Department of Chemical Engineering Ming Chi University of Technology New Taipei City24301 Taiwan Gingen Technology Co. Ltd. Rm. 7 10F. No. 189 Sec. 2 Keelung Rd. Xinyi Dist. Taipei11054 Taiwan Department of Physics Faculty of Mathematics and Natural Science Lambung Mangkurat University Banjarmasin70124 Indonesia /Nanoro Ouagadougou03 Burkina Faso International PhD Program in Biomedical Engineering College of Biomedical Engineering Taipei Medical University Taipei11031 Taiwan Stanford Byers Center for Biodesign Stanford University CA94305-5428 United States Graduate Institute of Biomedical Optomechatronics College of Biomedical Engineering Taipei Medical University Taipei11031 Taiwan Cell Physiology and Molecular Image Research Center Wan Fang Hospital Taipei Medical University Taipei11696 Taiwan

BiVO4 with suitable band edges and a small band gap is considered an efficient photocatalyst for the oxygen evolution reaction (OER), but short charge-transfer lengths limit its photocatalytic ability. Increasing active sites can essentially enhance oxidation reactions and photocatalytic ability. The alkaline etching technique can refine the surface properties of BiVO4 by introducing oxygen vacancies and possibly establishing a heterojunction, but suitable alkaline etching methods are rarely discussed. In this study, three alkaline etching methods, including hydrothermal, soaking, and electrodeposition processes, are first applied for a constant duration to tailor the surface properties of BiVO4 as a photocatalyst for the OER. Alkaline-etched BiVO4 prepared using hydrothermal and soaking processes shows better photocatalytic abilities due to the generation of additional oxygen vacancies, while poor photocatalytic ability is found for that fabricated using electrodeposition due to the formation of less photocatalytic VO2. The highest photocurrent density of 2.38 mA cm−2 is obtained at 1.23 V versus a reversible hydrogen electrode in an electrolyte without a hole scavenger for the BiVO4 etched in the hydrothermal process, while the untreated BiVO4 presents a photocurrent density of 0.58 mA cm−2. A photocurrent retention of 92.3% is achieved after 5000 seconds of continuous illumination. The study supplies blueprints for establishing effective alkaline etching methods for enhancing the photocatalytic ability of BiVO4, with the exception of time costs. © 2024 The Royal Society of Chemistry.

关键词： Charge transfer

来源：评论

学校读者我要写书评

暂无评论

The synergistic effects of strontium/magnesium-doped calcium silicate cement accelerates early angiogenesis and bone regeneration through double bioactive ion stimulation

引用

Ceramics International 2024年第4期50卷 7121-7131页

作者： Wang, Chen-Ying Chen, Cheng-Yu Chen, Kun-Hao Lin, Yen-Hong Yeh, Tzu-Peng Kai-Xing Lee, Alvin Huang, Cheng-Chieh Shie, Ming-You Graduate Institute of Clinical Dentistry School of Dentistry National Taiwan University Taipei106319 Taiwan Division of Periodontics Department of Dentistry National Taiwan University Hospital Taipei106319 Taiwan Research & Development Center for x-Dimensional Extracellular Vesicles China Medical University Hospital Taichung404332 Taiwan School of Medicine China Medical University Taichung City406040 Taiwan Department of Dental Technology and Materials Science Central Taiwan University of Science and Technology Taichung City406053 Taiwan Department of Orthopedic Surgery China Medical University Hospital Taichung City404332 Taiwan Department of Biomedical Engineering China Medical University Taichung406040 Taiwan Department of Bioinformatics and Medical Engineering Asia University Taichung City41354 Taiwan

Periodontitis-induced alveolar bone defects necessitate the use of bone grafts for optimal therapeutic outcomes. Therefore, synthetic bone grafts exhibiting consistent properties, sufficient amounts, and multiple application forms have been extensively studied. Our previously designed Ca–Si–Mg cement has demonstrated benefits regarding cell proliferation, osteogenesis, and angiogenesis. Similarly, Sr exhibits osteogenic, anti-osteoclastogenic, and angiogenic properties by influencing several intracellular signaling pathways. In this study, we modified the previously established Ca–Si–Mg cement by incorporating Sr, which resulted in the formation of Mg–Sr-calcium silicate (CS) cement. Furthermore, we evaluated its biocompatibility and efficacy in promoting osteogenesis and angiogenesis. The results revealed that the setting time of the cement was extended with the individual incorporation of either Mg or Sr;notably, the setting time of M5S5 (integrating both Sr and Mg in equal proportions) was 2.7 min shorter than that of M5S0 (integrating only Mg). In addition, the presence of Sr enhanced the mechanical strength to an ultimate strength of 1.89 MPa and reduced the biodegradation rate of the Mg-doped CS cement from a weight loss of 13.9 %–11.5 %. Sr and Mg also demonstrated a synergistic effect on cell proliferation, with no observed cytotoxicity in human periodontal ligament cells (hPDLs). Osteogenic markers such as alkaline phosphate, bone sialoprotein, and osteocalcin were significantly expressed in hPDLs under the combined influence of Mg and Sr on osteogenic activity. Similarly, the angiogenesis-related proteins, vascular endothelial growth factor and angiopoietin-1 exhibited considerable enhancement, indicating the angiogenic capability of M5S5. In summary, our in vitro experiments confirmed that M5S5 is a potential candidate for osteogenic substitutes and alveolar bone regeneration, suggesting its potential applicability in clinical practice. © 2023 Elsevier Lt

关键词： Cements

来源：评论

学校读者我要写书评

暂无评论

Decoding White Matter Fiber ODFs: A Mixture Learning Framework in x-q Space

Decoding White Matter Fiber ODFs: A Mixture Learning Framewo...

引用

2024 IEEE International Conference on Bioinformatics and Biomedicine, BIBM 2024

作者： Ma, Jiquan Deng, Chengdong Chen, Geng Jiang, Haotian Huang, Shijie Kim, Jaeil Wen, Xuyun Shen, Dinggang Heilongjiang University Department of Computer Science and Technology Harbin China Northwestern Polytechnical University School of Computer Science and Engineering Xi'an China Kyungpook National University School of Computer Science and Engineering Daegu Korea Republic of Nanjing University of Aeronautics and Astronautics School of Computer Science and Technology Nanjing China ShanghaiTech University School of Biomedical Engineering State Key Laboratory of Advanced Medical Materials and Devices Shanghai China Shanghai United Imaging Intelligence Co. Ltd. Shanghai China Shanghai Clinical Research and Trial Center Shanghai China

ISBN: (纸本)9798350386226

Diffusion magnetic resonance imaging (dMRI), as a powerful non-invasive white matter imaging technology, plays an important role in studying brain white matter. The fiber orientation distribution functions (fODFs) derived from dMRI data provide the key directional information of fiber tracts for revealing the 3D geometric structure of brain white matter. The estimation of fODFs faces two challenges, including (i) the demand for dMRI data densely sampled in q-space and (ii) the joint consideration of x-q space. To address these challenges, we propose a mixture learning framework with q-space sparely sampled dMRI data as input. Specifically, we propose an x-space learning module based on 3D U-Net to learn x-space features and a q-space learning module based on spherical convolutional neural networks to learn q-space features. Two kinds of features are then fused with a mixture learning fusion module for fODFs estimation. The whole framework is supervised with an x-q space loss function. Our framework makes full use of joint x-q space information for fODFs estimation with clinically available q-space sparsely sampled dMRI data. Extensive experiments on three public datasets show that our framework is effective in fODFs estimation and outperforms cutting-edge models. © 2024 IEEE.

关键词： Magnetic resonance imaging

来源：评论

学校读者我要写书评

暂无评论

Microstructural Control of Zn Alloy by Melt Spinning - a Novel Approach Towards Fabrication of Advanced Biodegradable biomedical materials

SSRN

引用

SSRN 2025年

作者： Rahim, Shebeer Abdul Tomei, Joseph Licavoli, Joseph Bakhsheshi-Rad, Hamid R. Goldman, Jeremy Drelich, Jaroslaw W. Department of Materials Science and Engineering Michigan Technological University 1400 Townsend Drive HoughtonMI49931 United States Advanced Materials Research Center Department of Materials Engineering Islamic Azad University Najafabad Branch Najafabad Iran Department of Biomedical Engineering Michigan Technological University 1400 Townsend Drive HoughtonMI49931 United States

Biodegradable metallic stents that dissolve over time are essential for treating vascular artery disease. Previous designs made from polymers and magnesium have not achieved the required mechanical properties and degradation patterns. Here, we report a novel zinc alloy that possesses a combination of high strength, good ductility, and uniform degradation behavior. The Zn-0.9Cu-0.4Mn-0.01Mg alloy is produced using melt spinning (a rapid solidification technique), compaction, and extrusion to enhance the synergy between strength and ductility. The melt-spun extruded alloy exhibits an elongation to failure of nearly 30% and a tensile strength exceeding 320 MPa, meeting the mechanical performance criteria required for vascular stenting materials. Melt spinning results in weak texture facilitating basal slip dislocations, and promoting ductility, while maintaining high strength. The microstructure of the melt-spun alloy displays a more uniform and finer microstructure as compared to the extruded alloy. The fine grain size and the uniform dispersion of secondary phases contribute to the uniform degradation behavior of the melt-spun extruded alloy, with a corrosion rate of ~ 0.6 mm/year and low corrosion current density of ~ 40 µA/cm2. The findings suggest that rapid solidification of zinc alloys through melt spinning is a promising approach for developing biodegradable medical implants of predictable degradation. © 2025, The Authors. All rights reserved.

关键词： Ductility

来源：评论

学校读者我要写书评

暂无评论

Nano-Heterostructured materials - Based Sensors for Safety and biomedical Applications 12

Nano-Heterostructured Materials - Based Sensors for Safety a...

引用

12th IEEE International Conference "Nanomaterials: Applications and Properties", NAP 2022

作者： Lupan, Oleg Magariu, Nicolae Kruger, Helge Sereacov, Alexandr Ababii, Nicolai Railean, Serghei Zimoch, Lukas Adelung, Rainer Hansen, Sandra Technical University Of Moldova Center For Nanotechnology And Nanosensors Department Of Microelectronics And Biomedical Engineering Chisinau Moldova Christian-Albrechts Universität Zu Kiel Faculty Of Engineering Department Of Materials Science Chair For Functional Nanomaterials KielD-24143 Germany

ISBN: (数字)9781665489829

ISBN: (纸本)9781665489829

Permanent monitoring of lithium-ion batteries (LIBs) and volatile organic compounds (VOCs) in various environments, especially for safety and biomedical applications, is a growing field due to the high reactivity of the materials used, which require specialized sensor structures. In this work, we summarize the detection performance of metal oxide heterostructures against battery solvents and volatile organic compounds and propose a way to tailor the sensor selectivity by modifying structural properties on the nanoscale. Therefore, the oxides are grown by a simple chemical solution method and by thermal layer deposition followed by thermal annealing at various temperatures. Subsequently, the morphology and structure as well as the electronic, chemical, and sensing properties of the formed semiconducting oxide heterostructures are investigated. Gas sensing studies have shown that the surface coverage with metal oxides and the formation of nano-heterostructures is an efficient approach to improve the LIB electrolyte sensing. The present approach demonstrates that the combination of the ability to sense the electrolyte vapors used in LIBs and the size control of different oxides enabled by the used synthesis route makes these nano-heterostructures extremely attractive for all kinds of sensing purposes, especially for battery safety control and biomedical applications. Our developments are very important for future LIB sensors and necessary for understanding the effect of the heterostructure type and the thickness of the top nanofilm on the gas response, which thus far has not been reported in the literature. © 2022 IEEE.

关键词： Zinc oxide

来源：评论

学校读者我要写书评

暂无评论

Piezoelectric electrostatic superlattices in monolayer MoS2

引用

Physical Review materials 2024年第1期8卷 014002-014002页

作者： Ashwin Ramasubramaniam Doron Naveh Department of Mechanical and Industrial Engineering University of Massachusetts Amherst 01003 MA United States Materials Science and Engineering Graduate Program University of Massachusetts Amherst 01003 MA United States Faculty of Engineering Bar-Ilan University Ramat Gan 52900 Israel Institute for Nanotechnology and Advanced Materials Bar-Ilan University Ramat Gan 52900 Israel

Modulation of electronic properties of materials by electric fields is central to the operation of modern semiconductor devices, providing access to complex electronic behaviors and greater freedom in tuning the energy bands of materials. Here, we explore one-dimensional superlattices induced by a confining electrostatic potential in monolayer MoS2, a prototypical two-dimensional semiconductor. Using first-principles calculations, we show that periodic potentials applied to monolayer MoS2 induce electrostatic superlattices in which the response is dominated by structural distortions relative to purely electronic effects. These structural distortions reduce the intrinsic band gap of the monolayer substantially while also polarizing the monolayer through piezoelectric coupling, resulting in spatial separation of charge carriers as well as Stark shifts that produce dispersive minibands. Importantly, these minibands inherit the valley-selective magnetic properties of monolayer MoS2, enabling fine control over spin-valley coupling in MoS2 and similar transition-metal dichalcogenides.

关键词： Electronic structure Piezoelectricity Valley degrees of freedom

来源：评论

学校读者我要写书评

暂无评论

PtS-decorated WS2 microflakes based sensors for selective ammonia detection at room temperature

引用

Sensors and Actuators B: Chemical 2023年第1期394卷

作者： Guang, Qiyilan Huang, Baoyu Yu, Jun Bonyani, Maryam Moaddeli, Mohammad Kanani, Mansour Mirzaei, Ali Kim, Hyoun Woo Kim, Sang Sub Li, Xiaogan School of Microelectronics Dalian University of Technology Dalian116024 China School of Biomedical Engineering Dalian University of Technology Dalian116024 China Department of Materials Science and Engineering School of Engineering Shiraz University Shiraz Iran Department of Materials Science and Engineering Shiraz University of Technology Shiraz Iran Division of Materials Science and Engineering Hanyang University Seoul133-791 Korea Republic of The Research Institute of Industrial Science Hanyang University Seoul133-791 Korea Republic of Department of Materials Science and Engineering Inha University Incheon402-751 Korea Republic of

In this paper, platinum sulfide decorated WS2 microflakes (PtS/WS2) heterostructure nanocomposites were prepared by an in-situ chemical reduction process. The chemiresistive-type gas sensor based on the synthesized PtS/WS2 heterostructure nanocomposites exhibited a significantly improved sensing properties compared to that of the pure WS2 microflakes at different concentration of NH3 from 1 ppm to 10 ppm at room temperature. As the concentrations of PtS nanoparticles decorated on the surface of WS2 microflakes increased, the response of the PtS/WS2 heterostructure sensor to ammonia firstly increased when the concentration of PtS increased up to 1 wt%, whereas above 1%, the response decreased instead. Moreover, it was found that the response speeds of the PtS-decorated WS2 were significantly improved compared to that pure WS2. The sensors also exhibited excellent selectivity to formaldehyde, toluene, acetone, methanol and ethanol at room temperature. The sensing mechanisms were studied by using the in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The enhanced sensing properties could be explained by "electronic sensitization" effect induced by the PtS/WS2 heterostructure, being confirmed by density functional theory (DFT) calculations. © 2023

关键词： Fourier transform infrared spectroscopy

来源：评论

学校读者我要写书评

暂无评论

Diffractive Imaging of Transient Electronic Coherences in Molecules with Electron Vortices

引用

Physical Review Letters 2025年第7期134卷 073001-073001页

作者： Haowei Wu Haiwang Yong Department of Chemistry and Biochemistry University of California San Diego La Jolla California 92093 USA Program in Materials Science and Engineering University of California San Diego La Jolla California 92093 USA

Direct imaging of transient electronic coherences in molecules has been challenging, with the potential to control electron motions and influence reaction outcomes. We propose a novel time-resolved vortex electron diffraction technique to spatially resolve transient electronic coherences in isolated molecules. By analyzing helical dichroism diffraction signals, the contribution of electronic populations cancels out, isolating the purely electronic coherence signals. This allows direct monitoring of the time evolution and decoherence of transient electronic coherences in molecules.

关键词： Molecules

来源：评论

学校读者我要写书评

暂无评论

Engineered biochemical cues of regenerative biomaterials to enhance endogenous stem/progenitor cells(ESPCs)-mediated articular cartilage repair

引用

Bioactive materials 2023年第8期26卷 490-512页

作者： Liangbin Zhou Jietao Xu Andrea Schwa Wenxue Tong Jiankun Xu Lizhen Zheng Ye Li Zhuo Li Shunxiang Xu Ziyi Chen Li Zou Xin Zhao Gerjo J.V.Mvan Osch Chunyi Wen Ling Qin Musculoskeletal Research Laboratory of Department of Orthopaedics and Traumatology&Innovative Orthopaedic Biomaterials and Drug Translational Research Laboratory of Li Ka Shing Institute of Health Sciences Faculty of MedicineThe Chinese University of Hong Kong999077Hong Kong SARChina Department of Biomedical Engineering Faculty of EngineeringThe Hong Kong Polytechnic University999077Hong Kong SARChina Department of Orthopaedics and Sports Medicine Erasmus MCUniversity Medical Center Rotterdam3015 GDRotterdamthe Netherlands Department of Oral and Maxillofacial Surgery Erasmus MCUniversity Medical Center Rotterdam3015 GDRotterdamthe Netherlands Centre for Regenerative Medicine and Health Hong Kong Institute of Science&InnovationChinese Academy of Sciences-CRMH999077Hong Kong SARChina Department of Biomedical Engineering Faculty of EngineeringThe Chinese University of Hong Kong999077Hong Kong SARChina Department of Otorhinolaryngology Erasmus MCUniversity Medical Center Rotterdam3015 GDRotterdamthe Netherlands Department of Biomechanical Engineering Faculty of MechanicalMaritime and Materials EngineeringDelft University of Technology(TU Delft)2600 AADelftthe Netherlands Centre for Translational Medicine Research and Development Shenzhen Institute of Advanced TechnologyThe Chinese Academy of Sciences518000ShenzhenChina

As a highly specialized shock-absorbing connective tissue,articular cartilage(AC)has very limited self-repair capacity after traumatic injuries,posing a heavy socioeconomic *** clinical therapies for small-to medium-size focal AC defects are well-developed endogenous repair and cell-based strategies,including microfracture,mosaicplasty,autologous chondrocyte implantation(ACI),and matrix-induced ACI(MACI).However,these treatments frequently result in mechanically inferior fibrocartilage,low cost-effectiveness,donor site morbidity,and short-term *** prompts an urgent need for innovative approaches to pattern a pro-regenerative microenvironment and yield hyaline-like cartilage with similar biomechanical and biochemical properties as healthy native *** regenerative biomaterials can create a favorable local environment for AC repair without causing relevant regulatory and scientific concerns from cell-based treatments.A deeper understanding of the mechanism of endogenous cartilage healing is furthering the(bio)design and application of these ***,the utilization of regenerative biomaterials to magnify the repairing effect of joint-resident endogenous stem/progenitor cells(ESPCs)presents an evolving improvement for cartilage *** review starts by briefly summarizing the current understanding of endogenous AC repair and the vital roles of ESPCs and chemoattractants for cartilage *** several intrinsic hurdles for regenerative biomaterials-based AC repair are *** recent advances in novel(bio)design and application regarding regenerative biomaterials with favorable biochemical cues to provide an instructive extracellular microenvironment and to guide the ESPCs(***,migration,proliferation,differentiation,matrix production,and remodeling)for cartilage repair are ***,this review outlines the future directions of engineering the next-generation regenerative biomaterials toward ultim

关键词： Regenerative biomaterials Endogenous stem/progenitor cells(ESPCs) Articular cartilage(AC)repair Biochemical cues

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：