检索结果-内蒙古大学图书馆

A bioinspired high-modulus mineral hydrogel binder for improving the cycling stability of microsized silicon particle-based lithium-ion battery

引用

Nano Research 2019年第5期12卷 1121-1127页

作者： Meng Tian Xiao Chen Shengtong Sun Dong Yang Peiyi Wu State Key Laboratory of Molecular Engineering of Polymers Department of Macromolecular ScienceLaboratory for Advanced MaterialsFudan UniversityShanghai 200433China State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of ChemistryChemical Engineering and BiotechnologyCenter for Advanced Low-dimension MaterialsDonghua UniversityShanghai 201620China

Silicon with high specific capacity is deemed an ideal anode material for lithium ion batteries,which,however suffers from low cycling life due to its dramatic volume ***-soluble polymer binders recently gain increasing attention by providing an eco-friendly and low-cost way in improving the cycling stability of Si-based ***,a novel bioinspired supramolecular mineral hydrogel binder consisting of polyacrylic acid (PAA) physically crosslinked with amorphous calcium carbonate (ACC) nanoparticles is designed for high-performance anodes made from low-cost microsized Si *** to its organic-inorganic hydrophilic nature,ACC-PAA hybrid binder exhibits the reported highest modulus (~22 GPa) for polymer binders in electrolyte,even higher than lithiated Si species (Li15Si4,~12 GPa).Together with its excellent adhesion and electrochemical stability,ACC-PAA binder can effectively suppress the pulverization of Si particles and maintain the mechanical integrity of electrodes during ***,even with a low binder content,the anode still shows an initial discharge capacity of 2,973 mAh·g^-1 and Coulombic efficiency of 81.5%,and retains 75% at a current density of 600 mA·g^-1 after 100 *** present organic-inorganic hybrid mineral binder may open a new approach for designing more effective polymer binders for Si-based lithium-ion batteries.

关键词： polymer binder mineral hydrogel microsized silicon particle lithium-ion battery

来源：评论

学校读者我要写书评

暂无评论

Spectral Insights into Microdynamics of Thermoresponsive Polymers from the Perspective of Two-dimensional Correlation Spectroscopy

引用

Chinese Journal of Polymer science 2017年第6期35卷 700-712页

作者：孙胜童武培怡 State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of Chemistry Chemical Engineering and Biotechnology Center for Advanced Low-Dimension Materials Donghua University State Key Laboratory of Molecular Engineering of Polymers Collaborative Innovation Center of Polymers and Polymer Composite Materials Department of Macromolecular Science and Laboratory for Advanced Materials Fudan University

Generalized two-dimensional correlation spectroscopy （2DCOS） and its derivate technique, perturbation correlation moving window （PCMW）, have found great potential in studying a series of physico-chemical phenomena in stimuli-responsive polymeric systems. By spreading peaks along a second dimension, 2DCOS can significantly enhance spectral resolution and discern the sequence of group dynamics applicable to various external perturbation-induced spectroscopic changes, especially in infrared （IR）, near-infrared （NIR） and Raman spectroscopy. On the basis of 2DCOS synchronous power spectra changing, PCMW proves to be a powerful tool to monitor complicated spectral variations and to find transition points and ranges. This article reviews the recent work of our research group in the application of 2DCOS and PCMW in thermoresponsive polymers, mainly focused on liquid crystalline polymers and lower critical solution temperature （LCST）-type polymers. Details of group motions and chain conformational changes upon temperature perturbation can thus be elucidated at the molecular level, which contribute to the understanding of their phase transition nature.

关键词： Thermoresponsive polymers Phase transition Two-dimensional correlation spectroscopy Perturbation correlation moving window

来源：评论

学校读者我要写书评

暂无评论

Surface-modified Ag@Ru-P25 for photocatalytic CO_(2) conversion with high selectivity over CH_(4) formation at the solid–gas interface

引用

Carbon Energy 2024年第1期6卷 182-196页

作者： Chaitanya B.Hiragond Sohag Biswas Niket SPowar Junho Lee Eunhee Gong Hwapyong Kim Hong Soo Kim Jin-Woo Jung Chang-Hee Cho Bryan M.Wong Su-Il In Department of Energy Science&Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)DaeguRepublic of Korea Department of Chemical&Environmental Engineering Materials Science&Engineering ProgramDepartment of ChemistryDepartment of Physics&AstronomyUniversity of California-RiversideRiversideCaliforniaUSA Department of Physics and Chemistry Daegu Gyeongbuk Institute of Science and Technology(DGIST)DaeguRepublic of Korea NiceScience Corporation DaeguRepublic of Korea

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective *** doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) ***-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction *** optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity.

关键词： gas-phase CO_(2) reduction H_(2)O_(2) treatment plasmonic nanoparticles solar fuel photocatalyst surface modification

来源：评论

学校读者我要写书评

暂无评论

Effect of Mixing Strategy on the Structure-Properties of the PLA/PBAT Blends Incorporated with CNC

引用

Journal of Renewable Materials 2022年第1期10卷 149-164页

作者： Deniz Sema Sarul Dogan Arslan Emre Vatansever Yusuf Kahraman Ali Durmus Reza Salehiyan Mohammadreza Nofar Polymer Science and Technology Program Institute of Science and TechnologyIstanbul Technical UniversityIstanbul34469Turkey Metallurgical&Materials Engineering Department Faculty of Chemical and Metallurgical EngineeringIstanbul Technical UniversityIstanbul34469Turkey Department of Chemical Engineering Faculty of EngineeringIstanbul University-CerrahpasaIstanbul34320Turkey Department of Materials Research and Technology Luxembourg Institute of Science and TechnologyEsch-sur-Alzette4362Luxembourg

Polylactide(PLA)/poly(butylene adipate-co-terephthalate)(PBAT)blend nanocomposites including 3 wt%of cel-lulose nanocrystals(CNCs)were prepared by melt compounding method in a twin-screw extruder and an inter-nal *** nanocomposites were formulated by diluting three different masterbatches prepared by solution casting method that contained 7 wt%of *** masterbatches were:(m1)PLA/PBAT/CNC masterbatch;(m2)PLA/CNC masterbatch;and(m3)PBAT/CNC *** were to explore how different prepara-tion methods affect the dispersion and localization of CNC and hence the properties of PLA/PBAT/CNC blend *** electron microscopy(SEM)was used to study the structural changes of the *** properties of PLA/PBAT blends and PLA/PBAT/CNC blend nanocomposites were also *** the samples prepared by internal mixer,the rheological behavior of blend nanocomposite prepared through premixing of CNC particles with PLA showed a transition from liquid-like to a gel-like *** to the rheological results and differential scanning calorimetry(DSC)analysis,it was found that the CNC overall enhanced the viscoelastic properties of blends and improved the PLA crystallization,*** mechanical analysis(DMA)illustrated that the incorporation of CNC also enhanced the elastic modulus of PLA/PBAT blends specifically above the glass transition temperature of *** expected improvements in mechanical properties did not occur due to the possible existence of residual solvent in the blends.

关键词： Polylactide poly(butylene adipate-co-terephthalate) cellulose nanocrystals blend nanocomposite morphology rheology

来源：评论

学校读者我要写书评

暂无评论

In-situ forming ultra-mechanically sensitive materials for high-sensitivity stretchable fiber strain sensors

引用

National science Review 2024年第6期11卷 254-263页

作者： Rouhui Yu Changxian Wang Xiangheng Du Xiaowen Bai Yongzhong Tong Huifang Chen Xuemei Sun Jing Yang Naoji Matsuhisa Huisheng Peng Meifang Zhu Shaowu Pan State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of Materials Science and Engineering Donghua University MOE Key Lab of Disaster Forecast and Control in Engineering School of Mechanics and Construction Engineering Jinan University State Key Laboratory of Molecular Engineering of Polymers Department of Macromolecular Science and Institute of Fiber Materials and Devices Fudan University Department of Cardiology Shanghai Xuhui Central HospitalZhongshan-Xuhui Hospital Fudan University Research Center for Advanced Science and Technology and Institute of Industrial Science The University of Tokyo

Fiber electronics with flexible and weavable features can be easily integrated into textiles for wearable applications. However, due to small sizes and curved surfaces of fiber materials, it remains challenging to load robust active layers, thus hindering production of high-sensitivity fiber strain sensors. Herein, functional sensing materials are firmly anchored on the fiber surface in-situ through a hydrolytic condensation *** anchoring sensing layer with robust interfacial adhesion is ultra-mechanically sensitive, which significantly improves the sensitivity of strain sensors due to the easy generation of microcracks during stretching. The resulting stretchable fiber sensors simultaneously possess an ultra-low strain detection limit of 0.05%, a high stretchability of 100%, and a high gauge factor of 433.6, giving 254-folds enhancement in sensitivity. Additionally, these fiber sensors are soft and lightweight, enabling them to be attached onto skin or woven into clothes for recording physiological signals, e.g. pulse wave velocity has been effectively obtained by them. As a demonstration, a fiber sensor-based wearable smart healthcare system is designed to monitor and transmit health status for timely intervention. This work presents an effective strategy for developing high-performance fiber strain sensors as well as other stretchable electronic devices.

关键词： fiber strain sensor stretchable wearable healthcare

来源：评论

学校读者我要写书评

暂无评论

Warpage and Shrinkage Optimization of Injection-Molded Plastic Spoon Parts for Biodegradable Polymers Using Taguchi, ANOVA and Artificial Neural Network Methods

引用

Journal of Materials science & Technology 2016年第8期32卷 710-720页

作者： Erfan Oliaei Behzad Shiroud Heidari Seyed Mohammad Davachi Mozhgan Bahrami Saeed Davoodi Iman Hejazi Javad Seyfi Applied Science Nano Research Group ASNARKA P.C. *** Tehran Iran Macromolecular Science and Engineering University of Michigan Ann Arbor Michigan 48109-2136. United States Department of Chemical Engineering Shahrood Branch Islamic Azad University RO. Box 36155-163 Shahrood lran

In this study, it is attempted to give an insight into the injection processability of three self-prepared polymers from A to Z. This work presents material analysis, injection molding simulation, design of ex- periments alongside considering all interaction effects of controlling parameters carefully for green biodegradable polymeric systems, including polylactic acid （PLA）, polylactic acid-thermoplastic poly- urethane （PLA-TPU） and polylactic acid-thermoplastic starch （PLA-TPS）. The experiments were carried out using injection molding simulation software Autodesk Moldflov~~ in order to minimize warpage and volumetric shrinkage for each of the mentioned systems. The analysis was conducted by changing five significant processing parameters, including coolant temperature, packing time, packing pressure, mold temperature and melt temperature. Taguchi＇s [.27 （35） orthogonal array was selected as an efficient method for design of simulations in order to consider the interaction effects of the parameters and reduce spu- rious simulations. Meanwhile, artificial neural network （ANN） was also used for pattern recognition and optimization through modifying the processing conditions. The Taguchi coupled analysis of variance （ANOVA） and ANN analysis resulted in definition of optimum levels for each factor by two completely different methods. According to the results, melting temperature, coolant temperature and packing time had significant influence on the shrinkage and warpage. The ANN optimal level selection for minimiza- tion of shrinkage and/or warpage is in good agreement with ANOVA optimal level selection results. This investigation indicates that PLA-TPU compound exhibits the highest resistance to warpage and shrink- age defects compared to the other studied compounds.

关键词： Injection molding simulation Yaguchi Artificial neural networks Biodegradable plastic Disposable spoons

来源：评论

学校读者我要写书评

暂无评论

Highly stable, active and recyclable solid acid catalyst based on polymer-coated magnetic composite particles

引用

Chinese chemical Letters 2019年第12期30卷 2043-2046页

作者： Jianxin Luo Xucheng Zhang Chunyan Zhang Tao Wang Xue Chen Hongyu Chen Steve King Changchun Wang Department of Materials and Chemical Engineering Hunan Institute of TechnologyHengyang 421002China State Key Laboratory of Molecular Engineering of Polymers and Department of Macromolecular ScienceFudan UniversityShanghai 200433China Dow Chemical China Holding Company Shanghai 201203China Dow Chemical Company Lake Jackson 77566United States

A facile approach has been adopted for coating cross-linked polystyrene(PS) shells on the surface of Fe304 magnetic clusters using reflux-precipitation polymerization(RPP).Treating the PS shell with chlorosulfonic acid yields magnetic composite particles with acid *** adjusting the amount and proportion of monomers(styrene and divinylbenzene),the obtained magnetic composite particle solid acid(MPM-5 S) exhibits a saturation magnetization value of 18 emu/g,a specific surface area of 243 m^2/g and an acid density of 2.113 mmol/*** MPM-5 S magnetic solid acid catalyst was evaluated for esterification of oleic acid with methanol to prepare *** mild conditions,the conversion of oleic acid reached 91%,which was much higher than the catalytic activity of Amberlyst-15 and close to the catalytic activity of concentrated H2 *** solid acid catalyst can be recovered by magnetic separation and reused three times maintaining over 95% of its initial catalytic ***,the solid acid can be used to catalyze the dehydration of fructose to 5-hydroxymethylfurfural.

关键词： Reflux precipitation polymerization Solid acid Magnetic separation Biodiesel Recyclability

来源：评论

学校读者我要写书评

暂无评论

Tuning Polymer Molecular Weight Distribution in Cationic RAFT Polymerization by Mixing Chain Transfer Agents

引用

Chinese Journal of Chemistry 2023年第14期41卷 1684-1690页

作者： Miao Chen Jiajia Li Dong Xing Xiangqiang Pan Jian Zhu State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials Jiangsu Key Laboratory of Advanced Functional Polymer Design and ApplicationSuzhou Key Laboratory of Macromolecular Design and Precision SynthesisDepartment of Polymer Science and EngineeringCollege of ChemistryChemical Engineering and Materials ScienceSoochow UniversitySuzhouJiangsu215123 China

Polymer dispersity (Đ) or molecular weight distribution (MWD) is a basic but vital parameter for the properties of polymeric materials. Developing new methodologies for controlling polymer MWD is emerging as a research hotspot. However, the methods to tune polymer MWD in cationic polymerization are still not well explored. Herein, we present a simple method to control the dispersity of poly(isobutyl vinyl ether) (PIBVE) by mixing two different chain transfer agents in batch visible light induced cationic RAFT polymerization. A broad dispersity range (Đ ≈ 1.16—1.80) was successfully achieved while maintaining monomodal MWD. Moreover, chain extension of PIBVE through both cationic polymerization and radical polymerization has been studied, which also provides a method to tune polymer MWD in mechanism transformation polymerization.

关键词： RAFT Photopolymerization Copolymers lonic polymerization Molecular weight distribution Dispersity

来源：评论

学校读者我要写书评

暂无评论

High Performance Microwave Absorption Material Based on Metal-Backboned Polymer

引用

Chinese Journal of Polymer science 2024年第12期42卷 1881-1887,I0006页

作者： Jia-Ning Xu Kai-Wen Zeng Yi-Feng Zhang Yi-Bei Yang Zi-Wei Liu Yue Liu Jia-Jia Wang Kai-Lin Zhang Yan-Ru-Zhen Wu Hao Sun Hui-Sheng Peng State Key Laboratory of Molecular Engineering of Polymers Department of Macromolecular ScienceInstitute of Fiber Materials and Devicesand Laboratory of AdvancedMaterialsFudanUniversityShanghai200438China Frontiers Science Center for Transformative Molecules Schoolof Chemistry and Chemical Engineeringand Zhangjiang Institute for Advanced StudyShanghai JiaoTongUniversityShanghai200240China

Metal-backboned polymers with anisotropy microstructures are promising for conductive,optoelectronic,and magnetic functional ***,the structure-property relationships governing the interplay between the chemical structure and electromagnetic property of the metal-backboned polymer have been rarely *** we report a carbon/nickel hybrid from metal-backboned polymer to serve as electromagnetic wave-absorbing materials,which exhibit high microwave absorption capacity and tunable absorption *** presence of nickel backbones promote the generation of heterogeneous interfaces with carbon during calcination,thereby enhancing the wave-absorbing capacity of the carbon/nickel *** C/Ni hybrids show a minimal reflection loss of-49.1 dB at 13.04 GHz,and its frequency of the absorption band can be adjusted by controlling the thickness of the absorption layer.

关键词： Nickel Metal-backboned polymer Carbon Hybrid material

来源：评论

学校读者我要写书评

暂无评论

A novel wet-spinning method of manufacturing continuous bio-inspired composites based on graphene oxide and sodium alginate

引用

Nano Research 2016年第3期9卷 735-744页

作者： Xiaozhen Hu Sangeetha Rajendran Yuansi Yao Zheng Liu Karthikeyan Gopalsamy Li Peng Chao Gao State Key Laboratory for Modification of Chemical Fibers and Polymer Materials Donghua University Shanghai 201620 China MOE Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering Zhejiang University Hangzhou 310027 China

Nacre is a lightweight, strong, stiff, and tough material, which makes it a mimicking object for material design. Many attempts to mimic nacre by various methods resulted in the synthesis of artificial nacre with excellent properties. However, the fabrication procedure was very laborious and time-consuming due to the sequential steps, and only limited-sized materials could be obtained. Hence, a novel design enabling scalable production of high-performance artificial nacre with uniform layered structures is urgently needed. We developed a novel wet-spinning assembly technique to rapidly manufacture continuous nacre- mimic graphene oxide （GO, brick）-sodium alginate （SA, mortar） films and fibers with excellent mechanical properties. At high concentrations, the GO-SA mixtures spontaneously produced liquid crystals （LCs） due to the template effect of GO, and continuous, 6 m long nacre-like GO-SA films were wet-spun from the obtained GO-SA liquid crystalline （LC） dope with a speed of up to 1.5 m/min. The assembled macroscopic GO-SA composites inherited the alignment of the GO sheets from the LC phase, and their mechanical properties were investigated by a joint experimental-computational study. The tensile tests revealed that the maximum strength （0） and Young＇s modulus （E） of the obtained films reached 239.6 MPa and 22.4 GPa, while the maximum values of o and E for the fibers were 784.9 MPa and 58 GPa, respectively. The described wet-spinning assembly method is applicable for a large-scale and fast production of high-performance continuous artificial nacre.

关键词： continuous bio-inspired films sodium alginate graphene oxide wet-spinning method

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：