检索结果-内蒙古大学图书馆

ADVANCED technology IN SHIP DESIGN ANALYSIS AND PRODUCTION

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 233-242页

作者： PARKER, MN ODABASI, AY FITZSIMMONS, PA GOGGIN, CJ M.N. Parker:is a senior manager of the British Ship Research Association (BSRA) with particular responsibility for technical computing and CADCAM developments. He graduated in naval architecture and joined BSRA shortly after its formation in 1945 specializing in structural design and ship hydrodynamics. He became head of the computer division of BSRA in 1968 and was responsible for the development of the original BRITSHIPS system for numerical lofting and NC production subsequently enhanced as an interactive detail design and production system BRITSHIPS 2. From 1977 to 1979 he was manager of BSRA technical services with a responsibility for marketing software and technology on a world wide basis. A.Y. Odabasi:is a former professor of naval architecture at the Technical University of Istanbul Turkey. Dr. Odabasi has been at BSRA since 1975 and now holds the position “Senior Scientist.” His principal work has been in 3-D ship boundary layers ship stability seakeeping cavitation induced hull excitation propeller-hull interaction and computer aided ship design. P.A. Fitzsimmons:has been at BSRA since 1971 and holds the position Manager Numerical Hydromechanics. His principal areas of work have been ducted propeller design propeller design and analysis propeller and wake induced excitation wave criteria and computer aided ship design. C.J. Goggin:has been employed at BSRA since 1979 and currently holds a position of Principal Research Officer in the Computer Applications Department. Areas of speciality are in the application of computer aided design to shipbuilding and ship design. He is presently responsible for the development and application of the B-LINES hull form design system.

Within the last ten years ship design, shipbuilding and ship operation have witnessed the emergence of new microcomputer technologies which have had a dramatic impact on the way ships are designed, built and operated. This paper presents the development of the BRITDES computer aided design and detailing system and its utilisation of microcomputers in ship design, analysis and production.

关键词：

来源：评论

学校读者我要写书评

暂无评论

ARCTIC TRAFFICABILITY PROGRAM - A REVIEW

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 169-175页

作者： VOELKER, R GLEN, IF SEIBOLD, F BAYLY, I Richard Voelker:is Vice President of ARCTEC Incorporated a firm specializing in cold regions technology. He has been responsible for the management of thePolarClass Traffic-ability Program since its inception and annually participates in the field data collection in the Arctic. His prior experience includes positions with the U.S. Coast Guard in the icebreaker design project the Military Sealift Command and at Newport News Shipbuilding. He is a graduate of N. Y.S. Maritime College and has a MS degree from the University of Michigan. I.F. Glen:received his professional degrees in naval architecture from the Royal Naval Engineering College Manadon Plymouth and RN College Greenwich London entering the Royal Corps of Naval Constructors in 1967. After serving as a Constructor Lieutenant in the Royal Navy's Far East Fleet for a short period he joined the Polaris submarine project team in Bath England in 1968. In 1971 he was seconded to the Canadian Department of National Defense in Ottawa as a Constructor Lieutenant Commander under NATO exchange arrangements where he had responsibilities initially for conventional submarines and latterly for computer aided conceptual design. He ventured to Bath England in 1974 and joined Forward Design Group. In 1975 he took a position as a civilian engineer in the Canadian Defense Department and was Head of Hull Systems Engineering from 1977 to 1979. He joined ARCTEC CANADA LIMITED in 1980 and in addition to managing ice model testing projects and full scale trials has specialized in structural response of ships to ice impact. He headed ARCTEC's Kanata Laboratory from 1981 to 1983 when he was promoted to president. Frederick Seibold:is a research program manager with the Maritime Administration's Office of Advanced Ship Development and Technology. He is responsible for the marine science program which includes research in the areas of ship powering structures and propeller performance and Arctic technology. Mr. Seibold has been employed by Mar Ad since 1961 having hel

This paper describes a multiyear program to make an operational assessment on the feasibility of a year-round Arctic marine transportation system to serve Alaska. Specifically, the three objectives were to: collect meteorological and ice data along potential marine routes; instrument the hull and propulsion machinery to improve design critera for ice-worthy ships; and demonstrate that ships can operate in midwinter Alaskan Arctic ice conditions. The U.S. Coast Guard's Polar class icebreakers were used to make the operational assessment by annually extending the route northward and by operating throughout the winter season. This paper reviews some of the operational and technical achievements to date, as well as plans for future Arctic deployments.

关键词：

来源：评论

学校读者我要写书评

暂无评论

AN ADVANCED METHODOLOGY FOR PRELIMINARY HULL FORM DEVELOPMENT

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 147-161页

作者： LIN, WC DAY, WG HOUGH, JJ KEANE, RG WALDEN, DA KOH, IY Wen-Chin Lin:heads the Ship Powering Division at the David Taylor Naval Ship R&D Center (DTNSRDC). Dr. Lin received his B.S. degree in mechanical engineering from the National Taiwan University in 1957. He was awarded his M.S. degree in naval architecture and Ph.D. in engineering science from the University of California at Berkeley in 1963 and 1966 respectively. From 1966 to 1969 he was employed by ESSO Research and Engineering Company to conduct marine hydrodynamic research for oil tankers and offshore structures. Since joining DTNSRDC in 1969 he has actively conducted and directed hydrodynamic research to advance naval ship design technology and improve ship performance. Active in national and international symposia on ship hydrodynamic research he is recognized for contributions to the ship research community. For the past six years he has been a member of the Performance Committee of the ITTC and currently serves as secretary of the committee. He is a member of SNAME and the Society of Naval Architects of Japan. William G. Day Jr:. has been employed as a naval architect at the David Taylor Naval Ship R&D Center since receiving a B.E.S. degree from the Johns Hopkins University in 1966. He obtained an M.S. E. degree from George Washington University in 1971. As Head Design Evaluation Branch of the Ship Performance Department he is responsible for model experiments to evaluate the hydrodynamic performance of ships and propulsors. He is a member of ASNE and SNAME. In-Young Koh:received his B.S. and M.S. degrees in electrical engineering from Lowell University in 1969 and 1971 respectively and his Ph.D. in applied mechanics from Rensselaer Polytechnic Institute in 1976. Dr. Koh joined DTNSRDC as an electronic engineer specializing in the application of advanced instrumentation and computer techniques to ship research and design. He is currently engaged in research and development of active control systems for naval ship applications. Dr. Koh is a member of ASNE SNAME and IEEE. David Andrew Walden:is

A ship design methodology is presented for developing hull forms that attain improved performance in both seakeeping and resistance. Contrary to traditional practice, the methodology starts with developing a seakeeping-optimized hull form without making concessions to other performance considerations, such as resistance. The seakeeping-optimized hull is then modified to improve other performance characteristics without degrading the seakeeping. Presented is a point-design example produced by this methodology. Merits of the methodology and the point design are assessed on the basis of theoretical calculations and model experiments. This methodology is an integral part of the Hull Form Design System (HFDS) being developed for computer-supported naval ship design. The modularized character of HFDS and its application to hull form development are discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RETROFITTING OF BULBOUS BOWS ON UNITED-STATES NAVY AUXILIARY AND AMPHIBIOUS WARSHIPS

引用

NAVAL ENGINEERS JOURNAL 1984年第6期96卷 40-51页

作者： CHUN, SK HOUGH, JJ ENGLE, AH FUNG, SC Stephen K. Chunis a graduate of the Maritime College of the State University of New York class of 1981 from which he received a B.E. degree in naval architecture and his license as a Third Assistant Engineer from the U.S. Coast Guard. Since graduation he has worked for the U.S. Navy as a naval architect with the Hull Form and Hydrodynamics Performance Division (SEA 55W3) of the Naval Sea Systems Command. Currently he is the task leader for hydrodynamic design for the DDG-51. He is also responsible for bulbous bow and appendage design for surf ace ships. Mr. Chun is a member of ASNE SNAME and ASE. Jeffrey J. Hough:is currently a naval architect with the Hull Form and Hydrodynamic Performance Division (SEA 55VV3) of the Naval Sea Systems Command (NA VSEA). In his current capacity he is a member of the Surface Ship Hydrodynamics Branch and is the divisional coordinator for computer supported design (CSD) technical director for the hull form design system (HFDS) Hull Engineering Group (SEA 55) assistant coordinator for CSD SEA 55 CSD coordinator for the DDG-51 contract design and SEA 55W3 project engineer for aircraft carrier/aviation support ship hydrodynamics. Mr. Hough received his B.S.E. degree in naval architecture and marine engineering in 1978 and his M.S.E. degree in naval architecture and marine engineering in 1979 from the University of Michigan. He began his career with the U.S. Navy in 1979 as an Engineer-in-Training in the Ship Design and Integration Directorate of NAVSEA. Prior to his current assignment Mr. Hough was the technical director responsible for the hull form and hydrodynamics energy conservation program and technical specialist for design practices for resistance and powering margins and hull form geometry. A member of ASNE since 1979 Mr. Hough is also a member of SNAME ASE and the U.S. Naval Institute. Allen H. Engleis a naval architect with the Hull Form Design and Performance Division of the Naval Sea Systems Command. He received his B.S. degree in engineering science from th

To meet energy conservation goals of the U.S. Navy, its attention has been focused on ways to reduce individual ship total resistance and powering requirements. One possible method of improving ship powering characteristics is by modifying existing individual ship hulls with the addition of bulbous bows. This paper will identify the merits of retrofitting bow bulbs on selected U.S. Navy auxiliary and amphibious warfare ships. A procedure for performing a cost-benefit analysis will be shown for candidate ship classes. An example of this technique for an amphibious warfare ship will also be provided. A brief discussion of future methods to be used for bulbous bow design such as application of systematic model test data and numerical hydrodynamic techniques will be given.

关键词： NAVAL VESSELS

来源：评论

学校读者我要写书评

暂无评论

THE NO FRAME CONCEPT - ITS IMPACT ON SHIPYARD COST

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 218-232页

作者： NAPPI, NS WALZ, RW WIERNICKI, CJ Natale S. Nappi:graduated from City College of New York in 1954 with a B.S. degree in civil engineering and received his M.S. in civil engineering from the Polytechnic Institute of Brooklyn in 1959. He began his professional career in 1954 at the New York Naval Shipyard as a naval architect (structures) performing detail structural design and fabrication studies for CVAs LPDs DDs and CGs and eventually became a supervisory naval architect (structures). From 1965 to 1973 he was a member of the staff of the Computer-Aided Design Division at the David Taylor Naval Ship Research and Development Center (DTNSRDC). As such he was involved in the development of the computer structural design tool the SSDP (in association with Frank M. Lev) and automated detail design programs (CASDOS). His current position is Senior Naval Architect Consultant in the structural integrity group of the Ship Structures Division Structures Department DTNSRDC. Mr. Nappi is the author and co-author of numerous technical papers and reports covering a wide spectrum of topics such as automated structural design process design for producibility and survivability material weight and cost trade-off studies and structural weight determination for high performance ships (i.e. SES SWATH HYSWAS). He has lectured on the subjects of design for survivability and ship structures at the Naval Post Graduate School and MIT. He is a member of ASNE ASCE U.S. Naval Institute Sigma Xi and is a registered Professional Engineer in the State of New York. Mr. Nappi was a member of the NAVSEA working commitee for the computer supported design planning effort and is currently a member of the DTNSRDC ASSET Advisory Committee. Ronald W. Walz:graduated in 1974 from Pennsylvania State University with a B.S. degree in civil engineering. He began his professional career in 1974 at the David Taylor Naval Ship Research and Development Center as a structural engineer in the structural design concepts group of the Ship Structures Division Structures Department.

A proposed cost effective alternative to current U.S. Navy structurally configured hulls is presented in this paper. This proposed design for producibility concept involves the elimination of structural stanchions and transverse web frames. The potential impact of this “no frame” concept on structural design, weight and construction and material costs for naval surface frigates and destroyers is reflected in 1) reduced costs for the installation of distributive systems and 2) a reduced number and complexity of structural details providing a more reliable and less costly structure. This study was performed in three parts: 1) Determine the most feasible length between bulkheads without frames; 2) Using this length perform detail weight studies and construction and material costs analysis comparison on a 72-foot long hull module, with and without frames, for a FFG-7, and 3) Estimate the saving in man hours of labor on the installation of distributive systems and shipfitting for an FFG-7. For the feasible length studies on the “no frame” structural configuration, thirty-seven strength, weight and vertical center of gravity studies were performed on two ship classes; twenty-two on the FFG-7 class and fifteen on the DD-963 class. The detailed weight studies and construction and material cost analyses were conducted for FFG-7 “no frame” and “as built” modules. Results indicating the “no frame” concept module was 6.8% heavier and 14.8% less costly than the “as built” module. For the impact of an FFG-7 “no frame” structurally configured hull on the cost of labor required for the installation of distributive systems and for other functional work such as ship fitting, welding, and electrical, this study indicated a reduction of 169,206 labor hours per ship, representing 7.12% of the total required man hours to fabricate an FFG-7 class ship. With the employment of the “no frame” concept, certain areas of significant concern and potential risk were addressed. These include: 1) t

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE DUODIRUN MERGING ALGORITHM - A NEW FAST ALGORITHM FOR PARALLEL MERGING

引用

INFORMATION PROCESSING LETTERS 1983年第3期17卷 167-168页

作者： ZHENG, ZJ Department of Computer Architecture Institute of Computing Technology Academia Sinica Beijing The People's Republic of China

Batcher (1968) has presented some parallel merging algorithms. A new direct algorithm different from Batcher's, but with more global optimal properties in the simplicity, regularity, symmetry, and generality, is presented. A theorem is presented stating that for every general algorithm for merging, if it merges all elements of duodirun(N), then it will merge the array cascaded by 2 sorted arrays. The theorem is easily confirmed by the zero-one principle. According to the theorem, the DuoDirun Merging Algorithm (DDMA) can be composed. The purpose of DDMA is to transform arrays in the duodirun structure.

关键词： Parallel merging run duodirun symmetry regularity sorting

来源：评论

学校读者我要写书评

暂无评论

THE STRUCTURAL SYNTHESIS DESIGN PROGRAM - ITS IMPACT ON THE FLEET

引用

NAVAL ENGINEERS JOURNAL 1983年第3期95卷 87-99页

作者： WIERNICKI, CJ GOODING, TG NAPPI, NS Mr. Christopher J. Wiernicki:graduated from Vanderbilt University in 1980 with a B.E. degree in Structural Engineering. Upon graduation he began his professional career at the David Taylor Naval Ship Research and Development Center. As a structural engineer in the Surface Ship Structures Division Mr. Wiernicki was responsible for developing improved methods and procedures for designing and evaluating structural systems for surf ace combatants. Specific projects included design for producibility development and evaluation of automated ship structural design methods and participation in the structural design of the CG 49 Cruiser and the current DDG 51 Destroyer. In 1982 Mr. Wiernicki received his M.S. degree in Ocean Engineering from George Washington University. Mr. Wiernicki is a recipient of the SNAME 1982-82 Graduate Scholarship and is currently doing post graduate work in Naval Architecture at Massachusetts Institute of Technology he is a member of ASNE SNAME ASCE and Chi Epsilon. Mr. Thomas G. Gooding:graduated in 1975 from the University of Michigan with B.S. degrees in Oceanography and Naval Architecture. After graduation he began his professional career at the Naval Ship Engineering Center (NA VSEC) as a structural engineer. From 1975 till 1978 Mr. Gooding worked in the area of ship dry docking and was the structural task leader on the complex overhaul ofUSS Long Beach (CGN-9). Mr. Gooding returned to the University of Michigan to receive a M.S. in Naval Architecture in 1979. Currently Mr. Gooding is the structural task leader on the DDGX/DDG 51 program at the Naval Sea Systems Command (NAVSEA). Mr. Gooding is a member of SNAME and the Naval Institute. Mr. Natale S. Nappi:graduated from City College of New York in 1954 with a Bachelor of Civil Engineering and received his M.S. in Civil Engineering from Polytechnic Institute of Brooklyn in 1959. He began his professional career in 1964 at the New York Naval Shipyard as a Naval Architect (Structure) performing detail structural design and fabrication s

The structural design of a ship's section is a complicated, repetitive and time consuming task. With the advent of new technology, high speed computers have enabled the ship designer to accomplish in a matter of seconds what would formerly take days to accomplish by hand. The Structural Synthesis Design Program (SSDP) is a N avy developed computer-aided design tool which is used to design (or to analyze) the longitudinal scantlings for a variety of ship cross sections, consisting of any practical combinations of decks, platforms, bulkheads and materials, i.e., various steel and aluminum alloys. The final hull section design will have the lowest practical weight for the chosen geometric configuration, structural arrangements, and imposed loadings. The scantling developed by the program will satisfy all U.S. N avy ship structural design criteria. An explanation of the objective and design elements of N avy ship structures is included. The rationale behind the SSDP design philosophy is developed along with the significant program capabilities. In an attempt to highlight the influence of automated design procedures on the current naval ship design process, the effect of the SSDP on the DDG 51 destroyer structural development is addressed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

computer AIDS FOR SHIP DESIGN, INTEGRATION AND CONTROL

引用

NAVAL ENGINEERS JOURNAL 1980年第2期92卷 73-87页

作者： CARLSON, CM JOHNSON, RA HELMING, FW Mr. Craig M. Carlson received his B.S. degree in Naval Architecture and Marine Engineering from the University of Michigan in 1970 and began his career with the Department of the Navy at the Naval Ship Engineering Center (NAVSEC). In 1972. he returned to the University of Michigan under the NAVSEC Long Term Training Program and received his M.S. degree in Naval Architecture and Marine Engineering. After returning to the Ship Arrangements Branch at NAVSEC. he was assigned as Task Leader for General Arrangements for the PGG PCG PHM. and MCM ship designs and was awarded Outstanding Performance Awards in 1974 and 1975. In addition he was Manager of the Arrangement Subsystem of the Navy's Computer-Aided Ship Design and Construction Program (CASDAC). In October 1979. he became Manager of the CASDAC Hull Design System. Currently. he also is enrolled in the M.S. of Computer Science Program at Johns Hopkins University. Mr. Carlson previously has presented technical papers at ASNE Day 1974 and 1978 as well as at the 1979 DOD Manufacturing Technology Advisory Group Conference. Besides ASNE. which he joined in 1972. he is a member of SNAME. ASE. and the U.S. Naval Institute. Mr. Robert A. Johnson is a Naval Architect in Surface Combatants Design (SEA 03D3). Ship Design Integration Directorate Naval Sea Systems Command. He received an Associate in Engineering degree in Drafting and Design Technology in 1959. his B.S. degree in Aerospace Engineering in 1965. and his M.S. degree in Engineering Mechanics in 1970. all from the Pennsylvania State University. In 1973. he was selected for the NA VSEC Hull Division s Long Term Training Program at the University of Michigan subsequently receiving his M.S.E. degree in Naval Architecture in 1974. Mr. Johnson began his career with the Ordnance Research Laboratory at Pennsylvania State University in 1959 where he worked. on the design of hydroelastic submarine models and conducted research in the area of flow induced structural vibrations. In 1967 he joined HRB-Singer at State Colle

This paper presents an integrated approach to computer-Aided Ship Design for U.S. Navy preliminary and contract design. An integrated Hull Design System (HDS), currently under development by the Hull Group of the Naval Sea Systems Command (NAVSEA 32). is the vehicle for the discussion. This paper is directed toward practicing ship design professionals and the managers of the ship design process. Primary emphasis of this paper, and of the development effort currently under way, is on aiding ship design professionals in their work. Focus is on integration and management control of the extremely complex set of processes which make up naval ship design. The terminology of the Ship Designer and Design Manager is used. The reader needs no familiarity with the technologies of computer science.

关键词：

来源：评论

学校读者我要写书评

暂无评论

AN EVALUATION OF ENERGY-CONSERVATION APPROACHES FOR SURFACE SHIPS

引用

NAVAL ENGINEERS JOURNAL 1980年第2期92卷 252-263页

作者： RAINS, DA STILES, HR HO, SPK Dr. Dean A. Rains Director of Advanced Programs and IRBD. Ingalls Shipbuilding Division Litton Industries Pascagoula Miss. has been an active member of ASNE since 1970. a frequent contributor to the Naval Engineers Journal and a participant at ASNE Day meetings as both an Author and a Discusser. He is an Associate Fellow of the American Institute of Aeronautics has twenty-three years experience in the field of Naval Engineering and is a graduate of the California Institute of Technology from which he received his B.S. degree (1950) and his M.S. degree (1952). both in Mechanical Engineering. and his Ph.D. degree (1954) in Mechanical Engineering and Mathematics. Mr. H. Richard Stiles graduated from the U.S. Naval Academy in 1965. Prior to leaving the naval service in 1970 he was designated as a Naval Aviator and authored two Patents one for an aircraft optical glide slope reference system and the second for an intercommunications system for air traffic control. As an author he has had technical papers published by SNAME — “Planning Hull Structure” — and by the Offshore Technology Conference — “A Fourth Generation Crewboat.” At the present time he serves as an Engineering Specialist for the Hull Technical Department at Ingalls Shipbuilding Division. Mr. Stephen P.K. Ho is also with Ingalls Shipbuilding Division where since 1970 he has worked on various phases of naval engineering and advanced studies. He received both his B.S. and M.S. degrees in Naval Architecture and Marine Engineering from the University of Michigan in 1958 and 1959 respectively. and prior to joining Ingalls Shipbuilding Division also worked with other Marine Firms in ship design particularly in computer applications to Preliminary Design the Construction Process and the Management Information System. Besides ASNE which he joined in January 1980. he is a member of SNAME.

Lower Fleet operating costs and independence from foreign fossil fuel resources are the goals of energy conservation efforts for Navy surface ship. This paper describes an evaluation of a wide variety of energy conservation approaches. A standard 20-knot, 300-hour Destroyer mission is established so that all of the approaches can be compared on a total fuel required basis. The approaches studied include use of aluminum hull construction; light weight machinery; trail-shaft or cross-connect operation for twin screw ships; improved performance propulsors; advanced power plant types, such as COGAS or cruise engines; use of energy storage techniques to improve ship service generator performance; electrical load reductions; improved performance ship service generators; hull drag reductions; crew size reductions; design margin reduction; reduced performance requirement (such as top speed); and habitability standard reductions. The overall results can be effected by reductions in range requirements as well. Mission duration was held constant at 45 days throughout the study. The results of the study indicate that the combination of these various possible improvements may reduce the fuel used to be as low as one-third of the current levels. Weight reductions are very effective for achieving significant fuel savings.

关键词：

来源：评论

学校读者我要写书评

暂无评论

An image processing approach to computer graphics

引用

computers and Graphics 1977年第2期2卷 111-117页

作者： Entwisle, Jeffrey The Architecture Machine Group This work is in part funded by the Computer Applications in Research Section Office of Computing Activities National Science Foundation (NSF grant No. GJ40501) in part by the Office of Naval Research Department of Navy (ONR grant No. N00014-67-A-204-0074) and in part by the IBM Corporation. Department of Architecture. Massachusettes Institute of Technology. Cambridge. MA 02139 U.S.A.

computer graphics was conceived as, and remains for the most part, a line-drawing phenomenon. The cautious management of display lists or of in-line vector generators has captured most of the attention of researchers in computer graphics. Cathode ray tubes with randomly positionable beams have served as the primary medium for this research and development. The underlying position of this paper is that the future of computer graphics does not lie in 'vectored' displays but in raster scan television, conceivably as we know it in our homes. This posture is motivated by arguments of cost and compatibility, but the most salient motivation comes in view of the ubiquitous nature of raster scan display technologies. This paper explains a way to implement an image processing approach to computer graphics, one that is conceptually straightforward and, in terms of hardware, fairly easy to design. A device is being built that encompases as much as is known about raster scan, multi-bit per point displays. The work described is conducted, principally, to produce a multi-bit per point graphics output device that dynamically shares its image storage with the memory space of an expanded mini-computer. © 1977.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：