检索结果-内蒙古大学图书馆

Optics Continuum 2025年第4期4卷 789-803页

作者： Esteban Farfán-Guillén, David Camporez, Higor Silva, Jair Adriano Lima Castellano Rodriguez, Juan Camilo Pohl, Alexandre De Almeida Prado CPGEI–Graduate Program in Electrical Engineering and Computer Science Federal University of Technology Paraná Curitiba80230–901 Brazil Graduate Program in Electrical Engineering Federal University of Espírito Santo Vitória29075-960 Brazil

Visible light communications (VLC) enable wireless data transmission using existing light-emitting diode (LED) illumination. This experimental study evaluates the performance of multiple input and multiple output (MIMO) configurations in indoor VLC systems by analyzing their impact on both communication and illumination. Various MIMO setups (2 × 2, 3 × 2, and 4 × 2) are compared against single input single output (SISO), and single input multiple outputs (SIMO) schemes, using commercial LED luminaires as transmitters. While the 4 × 2 MIMO configuration demonstrates superior overall performance, intermediate configurations like 3 × 2 or 2 × 2 MIMO offer an attractive trade-off between system complexity and performance enhancement, particularly in scenarios with space or cost constraints. The results show that MIMO configurations significantly outperform SISO systems, achieving reliable communication (BER ≤ 10−3) at practical indoor distances of up to 2 meters while maintaining illumination levels above 300 lux, where conventional SISO setups do not meet these dual requirements. These findings demonstrate the practical feasibility of MIMO-VLC systems for indoor deployments. © 2025 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.

关键词： Frequency division multiplexing Modulation techniques Multiple input multiple output Quadrature amplitude modulation Signal processing Visible light communications

来源：评论

学校读者我要写书评

暂无评论

Thermal Conductivity Measurement of Extrusion-Printed Silver Using Modulated Photothermal Radiometry

IEEE Journal on Flexible Electronics

引用

IEEE Journal on Flexible Electronics 2025年第3期4卷 126-136页

作者： Corona, Javier Schlake, Ellie Kandadai, Nirmala Oregon State University Department of Electrical and Computer Engineering CorvallisOR97331 United States

Flexible printed electronics is a rapidly growing field with applications in conformal and flexible devices. However, the physical properties of the films created by many state-of-the-art printing methods become highly dependent on printing parameters, resulting in varying thermal properties often differing significantly from their bulk ink components. To understand the influence of the printing process, we build upon our previous work, where a noncontact optical technique, known as modulated photothermal radiometry (MPTR), was used to measure the thermal conductivity of aerosol-jet-printed thin films. In this work, we use the method to study the thermal properties of extrusion-printed silver on glass and alumina substrates. A noise-resistant data analysis fitting technique is applied using a 2-D heat transfer model. The thermal conductivity measurement is validated using the Weidemann-Franz (WF) relationship from measured electrical conductivity values. © 2022 IEEE.

关键词： Extrusion

来源：评论

学校读者我要写书评

暂无评论

Secure signal and image transmissions using chaotic synchronization scheme under cyber-attack in the communication channel

引用

Soft Computing 2025年第1期29卷 339-353页

作者： Nobakht, Shaghayegh Ahmadi, Ali-Akbar Industrial Automation Laboratory Electrical and Computer Engineering Department Kharazmi University Tehran Iran

In this paper, problem of secure message (signal and image) transmission is studied. The message is encrypted by masking it with a chaotic system state and then transmitted to receiver-side via a communication channel. It is assumed that the communication channel may be prone to a cyber-attack. The transmission system dynamics in presence of the cyber-attack in the communication channel is modeled by a singular dynamical system. Then, at the receiver-side, a novel observer is designed to recover the message together with the cyber-attack signal. Estimation of the cyber-attack is crucial for monitoring the communication channel and enable a network supervisor to mitigate the adverse consequences and make an appropriate strategy. It is assumed neither restrictions on the message nor on the cyber-attack signals. This makes the proposed scheme, the best solution in the real applications. Moreover, comparing to the existing methods which two public and private channels are required, only one communication channel is used in this paper for transmission the encrypted signal which results in a cheaper solution. Solving the optimization problem can be easily performed with the help of the existing toolboxes such as YALMIP and CVX software in MATLAB. Finally, numerical simulations for signal and image transmission are presented to justify the applicability and superior performance of the proposed scheme. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2025.

关键词： Cyber attacks

来源：评论

学校读者我要写书评

暂无评论

Monitoring COVID-19 environment: a real-time facial mask detection using YOLO models

引用

Research on Biomedical engineering 2025年第1期41卷 1-18页

作者： Pandiyan, P. Thangaraj, Rajasekaran V, Balasubramanian V. K, Manavalasundaram S, Balakrishnan Department of Electrical and Electronics Engineering KPR Institute of Engineering and Technology Coimbatore India Department of Computer Science and Engineering Nandha Engineering College Erode India Department of Information Technology Velalar College of Engineering and Technology Erode India Department of Computer Science and Engineering Aarupadai Veedu Institute of Technology Chennai India Department of Computer Science and Engineering Sri Ramakrishna Institute of Technology Coimbatore India

Purpose: The rapid spread of COVID-19 has resulted in significant harm and impacted tens of millions of people globally. In order to prevent the transmission of the virus, individuals often wear masks as a protective measure for themselves and others. Coronavirus protection guidelines have been published by the World Health Organization (WHO). According to WHO standards, COVID-19 can be prevented by wearing a mask in public places and congested regions. In these places, it is very difficult to personally check to see if people are wearing face masks or not. Methods: The objective of this research work is to build a powerful, efficient, and real-time approach for detecting people not wearing masks. Three cutting-edge object identification models, namely YOLOv4, Tiny-YOLOv4, and YOLOv5, are employed in this study for the identification of masked faces. Result: The proposed YOLOv5 model is evaluated using real-time images captured using a smartphone or tablet. The test images include both single and multiple people with and without masks. The YOLOv5 model achieved recognition accuracy of 88.90% with an average detection speed of 0.0316 s per image, whereas the YOLOv4 and Tiny-YOLOv4 produced recognition accuracy of 82.24% and 74.80% with an average detection speed of 0.0530 s and 0.0541 s per image, respectively. Conclusion: The comparative performance suggests that the YOLOv5 model has a maximum recognition accuracy of 88.90% in face mask identification tasks compared to other models such as the YOLOv4 and Tiny-YOLOv4. © The Author(s), under exclusive licence to The Brazilian Society of Biomedical engineering 2025.

关键词： COVID-19

来源：评论

学校读者我要写书评

暂无评论

Distribution Locational Marginal Pricing Based Equilibrium Optimization Strategy for Data Center Park with Spatial-temporal Demand-side Resources

引用

Journal of Modern Power Systems and Clean Energy 2023年第6期11卷 1959-1970页

作者： Zhihao Yang Anupam Trivedi Ming Ni Haoming Liu Dipti Srinivasan IEEE College of Energy and Electrical Engineering Hohai UniversityNanjing 211100China Department of Electrical&Computer Engineering National University of SingaporeSingapore

This paper proposes a distribution locational marginal pricing(DLMP) based bi-level Stackelberg game framework between the internet service company(ISC) and distribution system operator(DSO) in the data center park. To minimize electricity costs, the ISC at the upper level dispatches the interactive workloads(IWs) across different data center buildings spatially and schedules the battery energy storage system temporally in response to DLMP. Photovoltaic generation and static var generation provide extra active and reactive power. At the lower level, DSO calculates the DLMP by minimizing the total electricity cost under the two-part tariff policy and ensures that the distribution network is uncongested and bus voltage is within the limit. The equilibrium solution is obtained by converting the bi-level optimization into a single-level mixed-integer second-order cone programming optimization using the strong duality theorem and the binary expansion method. Case studies verify that the proposed method benefits both the DSO and ISC while preserving the privacy of the ISC. By taking into account the uncertainties in IWs and photovoltaic generation, the flexibility of distribution networks is enhanced, which further facilitates the accommodation of more demand-side resources.

关键词： Bi-level optimization congestion management data center demand response distribution locational marginal pricing(DLMP) robust optimization

来源：评论

学校读者我要写书评

暂无评论

Printing Stretchable Electronics With Fused Filament Fabrication

IEEE Journal on Flexible Electronics

引用

IEEE Journal on Flexible Electronics 2025年第2期4卷 98-107页

作者： Jahan, Sharmin Lazarus, Nathan University of Delaware Electrical and Computer Engineering Department NewarkDE19716 United States

Additive manufacturing is a powerful approach forintegrating flexible and stretchable conductors into complex3-D structures, but many current printing technologies, suchas direct ink writing (DIW), are expensive and challengingto access for many potential users, such as hobbyists andsmall companies. In this work, a low-cost commercial fusedfilament fabrication (FFF) 3-D printer is used to manufacturelow-resistivity stretchable serpentine conductors. By using dualextruder heads, serpentines are printed in a highly conductivemetal-particulate-based composite on a thermoplastic elastomer(TPE) part and demonstrated to survive mechanical strains of upto 25%, sufficient for use in close contact with the human *** electroless plating is also demonstrated to metalize theprinted traces, depositing a thin layer of copper for improvedelectrical conductivity. Using this approach, we demonstrateconductivity improvements by about three orders of magnitude(∼ 103) over past FFF printed serpentines, a major milestonein making stretchable electronics cheaper and more *** resulting stretchable conductors are then demonstrated toprint devices, including stretchable inductors and stretchableinterconnect on a soft robotic actuator. © 2022 IEEE.

关键词： Reinforced plastics

来源：评论

学校读者我要写书评

暂无评论

Ensemble of deep learning techniques to human activity recognition using smart phone signals

引用

Multimedia Tools and Applications 2024年第42期83卷 89635-89664页

作者： Imanzadeh, Soodabeh Tanha, Jafar Jalili, Mahdi Electrical and Computer Engineering Department University of Tabriz Tabriz Iran School of Engineering RMIT University Melbourne Australia

Human Activity Recognition (HAR) has become a significant area of study in the fields of health, human behavior analysis, the Internet of Things, and human–machine interaction in recent years. Smartphones are a popular choice for HAR as they are common devices used in daily life. However, most available HAR datasets are gathered in laboratory settings, which do not reflect real-world scenarios. To address this issue, a real-world dataset using smartphone inertial sensors, involving 62 individuals, is collected. The collected dataset is noisy, small, and has variable frequency. On the other hand, in the context of HAR, algorithms face additional challenges due to intra-class diversity (which refers to differences in the characteristics of performing an activity by different people or by the same individual under different conditions) and inter-class similarity (which refers to different activities that are highly similar). Consequently, it is essential to extract features accurately from the dataset. Ensemble learning, which combines multiple models, is an effective approach to improve generalization performance. In this paper, a weighted ensemble of hybrid deep models for HAR using smartphone sensors is proposed. The proposed ensemble approach demonstrates superior performance compared to current methods, achieving impressive results across multiple evaluation metrics. Specifically, the experimental analysis demonstrates an accuracy of 97.15%, precision of 96.41%, recall of 95.62%, and an F1-score of 96.01%. These results demonstrate the effectiveness of our ensemble approach in addressing the challenges of HAR in real-world scenarios. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2024.

关键词： Smartphones

来源：评论

学校读者我要写书评

暂无评论

Design and Modeling of a Photonic Crystal Multiplexer Using Artificial Intelligence

Advanced Electromagnetics

引用

Advanced Electromagnetics 2025年第1期14卷 59-64页

作者： Karami, Pouya Yahya, Salah I. Palash, Behnam Chaudhary, Muhammad Akmal Assaad, Maher Parandin, Fariborz Roshani, Saeed Hazzazi, Fawwaz Roshani, Sobhan Department of Electrical Engineering Kermanshah Branch Islamic Azad University Kermanshah Iran Department of Communication and Computer Engineering Cihan University-Erbil Erbil44001 Iraq Department of Software Engineering Faculty of Engineering Koya University KOY45 Koya Iraq Department of Electrical and Computer Engineering College of Engineering and Information Technology Ajman University 346 Ajman United Arab Emirates Department of Electrical Engineering College of Engineering Prince Sattam bin Abdulaziz University Al-Kharj11492 Saudi Arabia

In this paper, design and modeling of an all-optical 2×1 multiplexer based on 2D photonic crystals and artificial neural networks (ANNs) are presented. The proposed structure aims to maximize the difference between the output powers in logical states, which is critical for enhancing the system ability to distinguish between these states. In this study, an ANN model is employed to accurately predict the normalized output power of the designed photonic crystal multiplexer, providing a time-efficient alternative to conventional simulation methods for analyzing multiplexer behavior across various logical states. The results demonstrate significant improvements in signal separation and overall performance compared to previous works. Additionally, a detailed comparison of the normalized output power for different logic states is provided, highlighting the advantages of the proposed design. © 2025, Advanced Electromagnetics. All rights reserved.

关键词： Silicon photonics

来源：评论

学校读者我要写书评

暂无评论

Exploring Hyperdimensional Computing Robustness Against Hardware Errors

引用

IEEE Transactions on computers 2025年第6期74卷 1963-1977页

作者： Zhang, Sizhe Juretus, Kyle Jiao, Xun Villanova University Department of Electrical and Computer Engineering VillanovaPA19085 United States

Brain-inspired hyperdimensional computing (HDC) is an emerging machine learning paradigm leveraging high-dimensional spaces for efficient tasks like pattern recognition and medical diagnostics. As a lightweight alternative to deep neural networks, HDC offers smaller model sizes, reduced computation, and memory-centric processing. However, deploying HDC in safety-critical applications, such as healthcare and robotics, is challenged by hardware-induced errors. This paper investigates HDC's robustness to memory errors via extensive bit-flip injection experiments on item and associative memories. Results reveal that certain bit-flips severely degrade accuracy. To address this, we introduce the Hyperdimensional Bit-Flip Search (HD-BFS), a similarity-guided method for identifying vulnerabilities and crafting efficient attacks, where flipping just 6 critical bits—3.9% of random bit-flips—reduces accuracy to chance levels. We further propose Hyperdimensional Accelerated Bit-Flip Search (HD-ABFS), which narrows the search space by targeting critical dimensions and most significant bits (MSBs), achieving up to 282x speedup over HD-BFS. Finally, we develop an effective protection mechanism to enhance model safety. These insights highlight HDC's resilience to random errors, offer robust defenses against targeted attacks, and advance the security and reliability of HDC systems. © 1968-2012 IEEE.

关键词： Deep neural networks

来源：评论

学校读者我要写书评

暂无评论

Multi-Model emotion recognition from speech using StarGAN, DCNN, and SVM

引用

Multimedia Tools and Applications 2025年 1-18页

作者： Banihosseini, Najmeh Sadat Ghods, Vahid Department of Electrical and Computer Engineering Semnan Branch Islamic Azad University Semnan Iran

Emotion recognition from speech is a significant research area in human–computer interaction and psychological assessments. This study proposes a novel three-stage process for emotion recognition from speech signals. In the first stage, pre-processing operations, including noise reduction and normalization, are applied to improve data quality. Then, StarGAN is employed for data augmentation, addressing the challenge of limited emotional speech data. The second stage involves extracting meaningful features from high-dimensional data using deep convolutional neural networks (DCNN). Finally, support vector machines (SVM) are used to classify the extracted features into distinct emotional categories. The main advantage of the proposed method over traditional deep learning techniques is the use of StarGAN for data augmentation, which improves performance on limited datasets. Additionally, the combination of DCNN and SVM enhances accuracy and efficiency in feature extraction and classification. This method has been evaluated using four different datasets, RAVDESS, Emo-DB, SAVEE, and CASIA, achieving accuracy rates of 98.25%, 95.5%, 96.8%, and 96.45%, respectively. The results indicate that the proposed method significantly outperforms existing methods and offers improved capabilities for practical application. Despite achieving high accuracy, challenges such as increased computational complexity and variability in performance across different datasets are discussed. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2025.

关键词： Convolutional neural networks

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：