检索结果-内蒙古大学图书馆

Correlation of work function and stacking fault energy through Kelvin probe force microscopy and nanohardness in diluteα-magnesium

引用

Journal of Magnesium and Alloys 2024年第1期12卷 237-250页

作者： Yigit Türe Ali Arslan Kaya Hüseyin Aydin Jiang Peng Servet Turan Eskisehir Technical University Porsuk Vocational SchoolElectronics and Automation DepartmentProgram of MechatronicsEskisehirTurkey Mugla Sitki Kocman University Engineering FacultyMetallurgy and Materials Engineering DepartmentMuglaTurkey Hüseying Aydın TUBITAK MRCTurkey Jiang Peng Chongqing UniversityChina Eskisehir Technical University Engineering FacultyMaterials Science and Engineering DepartmentEskisehirTurkey

Electronic interactions of the Group 2A elements with magnesium have been studied through the dilute solid solutions in binary Mg-Ca,Mg-Sr and Mg-Ba *** investigation incorporated the difference in the‘Work Function'(ΔWF)measured via Kelvin Probe Force Microscopy(KPFM),as a property directly affected by interatomic bond types,*** electronic structure,nanoindentation measurements,and Stacking Fault Energy values reported in the *** was shown that the nano-hardness of the solid-solutionα-Mg phase changed in the order of Mg-Ca>Mg-Sr>***,it was shown,by also considering the nano-hardness levels,that SFE of a solid-solution is closely correlated with its‘Work Function'***-hardness measurements on the eutectics andΔWF difference between eutectic phases enabled an assessment of the relative bond strength and the pertinent electronic structures of the eutectics in the three *** withΔWF and at least qualitative verification of those computed SFE values with some experimental measurement techniques were considered important as those computational methods are based on zero Kelvin degree,relatively simple atomic models and a number of *** asserted by this investigation,if the results of measurement techniques can be qualitatively correlated with those of the computational methods,it can be possible to evaluate the electronic structures in alloys,starting from binary systems,going to ternary and then multi-elemental *** investigation has shown that such a qualitative correlation is *** all,the SFE values are not treated as absolute values but rather become essential in comparative investigations when assessing the influences of alloying elements at a fundamental level,that is,free electron density *** study indicated that the principles of‘electronic metallurgy'in developing multi-elemental alloy systems can be followed via practical experimental methods,i.e.ΔWF measurements using KPF

关键词： Mg alloys Dilute alloys Work function Stacking fault energy Kelvin probe force microscopy Short range order Miedema Nanoindentation Eutectics

来源：评论

学校读者我要写书评

暂无评论

Artificial visual perception neural system using a solution-processable MoS_(2)-based in-memory light sensor

引用

Light(science & Applications) 2023年第8期12卷 1583-1594页

作者： Dayanand Kumar Lana Joharji Hanrui Li Ayman Rezk Ammar Nayfeh Nazek El-Atab Smart Advanced Memory Devices and Applications(SAMA)LaboratoryElectrical and Computer Engineering ProgramComputer Electrical Mathematical Science and Engineering DivisionKing Abdullah University of Science and Technology(KAUST)Thuwal 23955Kingdom of Saudi Arabia Department of Electrical Engineering and Computer Science Khalifa UniversityAbu Dhabi 127788United Arab Emirates

Optoelectronic devices are advantageous in in-memory light sensing for visual information processing,recognition,and storage in an energy-efficient ***,in-memory light sensors have been proposed to improve the energy,area,and time efficiencies of neuromorphic computing *** study is primarily focused on the development of a single sensing-storage-processing node based on a two-terminal solution-processable MoS2 metal-oxide-semiconductor(MOS)charge-trapping memory structure—the basic structure for charge-coupled devices(CCD)—and showing its suitability for in-memory light sensing and artificial visual *** memory window of the device increased from 2.8 V to more than 6V when the device was irradiated with optical lights of different wavelengths during the program ***,the charge retention capability of the device at a high temperature(100 ℃)was enhanced from 36 to 64%when exposed to a light wavelength of 400 *** larger shift in the threshold voltage with an increasing operating voltage confirmed that more charges were trapped at the Al_(2)O_(3)/MoS_(2) interface and in the MoS_(2) layer.A small convolutional neural network was proposed to measure the optical sensing and electrical programming abilities of the *** array simulation received optical images transmitted using a blue light wavelength and performed inference computation to process and recognize the images with 91%*** study is a significant step toward the development of optoelectronic MOS memory devices for neuromorphic visual perception,adaptive parallel processing networks for in-memory light sensing,and smart CCD cameras with artificial visual perception capabilities.

关键词： visual neural process

来源：评论

学校读者我要写书评

暂无评论

Enhancing waste sorting and recycling efficiency: robust deep learning-based approach for classification and detection

引用

Neural Computing and Applications 2025年第6期37卷 4567-4583页

作者： Sayem, Faizul Rakib Islam, Md. Sakib Bin Naznine, Mansura Nashbat, Mohammad Hasan-Zia, Mazhar Kunju, Ali K Ansaruddin Khandakar, Amith Ashraf, Azad Majid, Molla Ehsanul Kashem, Saad Bin Abul Chowdhury, Muhammad E. H. Department of Electrical and Electronic Engineering University of Dhaka Dhaka Bangladesh Department of Biomedical Engineering Military Institute of Science and Technology Dhaka Bangladesh Department of Computer Science & Engineering Rajshahi University of Engineering & Technology Rajshahi6204 Bangladesh Chemical Engineering Department University of Doha for Science and Technology Doha Qatar Department of Electrical Engineering Qatar University Doha2713 Qatar Computer Applications Department Academic Bridge Program Qatar Foundation Doha Qatar Department of Computing Science AFG College With the University of Aberdeen Doha Qatar

Given the severity of waste pollution as a major environmental concern, intelligent and sustainable waste management is becoming increasingly crucial in both developed and developing countries. The material composition and volume of urban solid waste are key considerations in processing, managing, and utilizing city waste. Deep learning technologies have emerged as viable solutions to address waste management issues by reducing labor costs and automating complex tasks. However, the limited number of trash image categories and the inadequacy of existing datasets have constrained the proper evaluation of machine learning model performance across a large number of waste classes. In this paper, we present robust waste image classification and object detection studies using deep learning models, utilizing 28 distinct recyclable categories of waste images comprising a total of 10,406 images. For the waste classification task, we proposed a novel dual-stream network that outperformed several state-of-the-art models, achieving an overall classification accuracy of 83.11%. Additionally, we introduced the GELAN-E (generalized efficient layer aggregation network) model for waste object detection tasks, obtaining a mean average precision (mAP50) of 63%, surpassing other state-of-the-art detection models. These advancements demonstrate significant progress in the field of intelligent waste management, paving the way for more efficient and effective solutions. © The Author(s) 2024.

关键词： Deep learning for waste management Intelligent waste management Object detection in waste management Sustainable waste processing Urban solid waste Waste image classification

来源：评论

学校读者我要写书评

暂无评论

Interfacial reactions in the Sn-9.0 wt.% Zn/Cu-Ti alloy (C1990 HP) couple

引用

Soldering and Surface Mount Technology 2024年第1期36卷 30-38页

作者： Laksono, Andromeda Dwi Chen, Chih-Ming Yen, Yee-Wen Department of Materials Science and Engineering National Taiwan University of Science and Technology Taipei Taiwan Department of Chemical Engineering National Chung Hsing University Taichung Taiwan Study Program of Material and Metallurgical Engineering Institut Teknologi Kalimantan Balikpapan Indonesia

Purpose: The purpose of this study was to examine the influence of adding a small amount of Ti to a Cu-based alloy, specifically the commercial Hyper Titanium Copper alloy (C1990 HP), which contains Cu-3.28 wt.% Ti, on its interfacial reaction with Sn-9.0 wt.% Zn (SnZn) solder, using the liquid/solid reaction couple technique. Design/methodology/approach: The SnZn/C1990 HP couples were subjected to a reaction temperature of 240–270°C for a duration of 0.5–5 h. The resulting reaction couple was characterized using a scanning electron microscope, energy dispersive spectrometer, electron probe microanalyzer and X-ray diffractometer. Findings: It was observed that the scallop-shaped CuZn5 and planar Cu5Zn8 phases were formed in almost all SnZn/C1990 HP couples. With increased reaction duration and temperature, the Cu-rich intermetallic compound (IMC)-Cu5Zn8 phase became a dominant IMC formed at the interface. The total thickness of the IMCs was increased with the increase in the reaction duration and temperature. The IMC growth obeyed the parabolic law, and the IMC growth mechanism was diffusion controlled. The activation energy of the SnZn/C1990 HP couple was 64.71 kJ/mol. Originality/value: This article presents an analysis of the IMC thickness in each sample using ImageJ software, followed by kinetic analysis using Origin software at various reaction temperatures of SnZn/C1990 HP in liquid/solid couples. The study also includes detailed reports on the morphology, interface composition and X-ray diffraction analysis, as well as the activation energy. The findings can serve as a valuable reference for electronic packaging companies that utilize C1990 HP substrates. © 2023, Emerald Publishing Limited.

关键词： Binary alloys

来源：评论

学校读者我要写书评

暂无评论

Ionic liquid passivated black phosphorus for stabilized compliant electronics

引用

Nano Research 2023年第5期16卷 7858-7866页

作者： Ravindra Mehta Misook Min Ridwan F.Hossain Gustavo A.Saenz Gerardo Gamboa Anupama B.Kaul Department of Materials Science and Engineering PACCAR Technology InstituteUniversity of North TexasDentonTX 76207USA Department of Electrical Engineering University of North TexasDentonTX 76207USA

Black phosphorus(BP)is an attractive material for two-dimensional(2D)electronics and optoelectronics given its direct optical band gap in the ***,the vulnerability of BP to oxygen and moisture under ambient conditions has been a significant impediment for the adoption of this material towards practical *** vulnerability has also curtailed the development of additively manufactured,solution processed,ink-jet printed BP devices,which are cost-effective alternatives to lithographically patterned rigid electronics and optoelectronics based on *** this work,we have fabricated stable BP electronic devices on flexible and compliant substrates using low-cost,additive manufacturing techniques with ink-jet printing through scalable chemical exfoliation *** address the stability issues with BP,ionic liquids(ILs)were used as a passivation layer on the surface of the BP to minimize oxidative *** enhanced stability of BP was inferred through Raman spectroscopy and scanning probe microscopy techniques,where no observable changes in the A^(1)_(g)and A^(2)_(g)Raman vibrational modes were observed with time for the BP films passivated with ILs over a period of 168 h under ambient *** the other hand,a blue-shift in these Raman modes was evident for unpassivated *** probe microscopy measurements clearly revealed the difference in the surface characteristics through localized regions of degradation that intensified with time,which was clearly absent in IL/BP *** stability measurements were also conducted in electronic device platforms for IL coated BP devices,where the temperature T dependence of the I_(ds)-V_(ds)characteristic was measured from T~5.4 to 335 *** demonstrations of stabilized ILs/BP devices at ambient printed on flexible polyimide substrates were also *** irradiation with broadband radiation appears to have a significant influence on the electrical behavior of BP,evident through t

关键词： 2D materials black phosphorus ionic liquids ink-jet printing flexible electronics

来源：评论

学校读者我要写书评

暂无评论

Advancing optothermal manipulation:decoupling temperature and flow fields in quasi-isothermal microscale streaming

引用

Light(science & Applications) 2023年第9期12卷 1713-1714页

作者： Youngsun Kim Yuebing Zheng Materials Science and Engineering Program and Texas Materials Institute The University of Texas at AustinAustinTX78712USA Walker Department of Mechanical Engineering The University of Texas at AustinAustinTX78712USA

By decoupling temperature and flow fields through symmetry-correlated laser scan sequences,ISO-FLUCS enables quasi-isothermal optofluidic microscale *** technique offers precise control over fluid manipulation while m... 详细信息

关键词： thermal isothermal flow

来源：评论

学校读者我要写书评

暂无评论

Surface-modified Ag@Ru-P25 for photocatalytic CO_(2) conversion with high selectivity over CH_(4) formation at the solid–gas interface

引用

Carbon Energy 2024年第1期6卷 182-196页

作者： Chaitanya B.Hiragond Sohag Biswas Niket SPowar Junho Lee Eunhee Gong Hwapyong Kim Hong Soo Kim Jin-Woo Jung Chang-Hee Cho Bryan M.Wong Su-Il In Department of Energy Science&Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)DaeguRepublic of Korea Department of Chemical&Environmental Engineering Materials Science&Engineering ProgramDepartment of ChemistryDepartment of Physics&AstronomyUniversity of California-RiversideRiversideCaliforniaUSA Department of Physics and Chemistry Daegu Gyeongbuk Institute of Science and Technology(DGIST)DaeguRepublic of Korea NiceScience Corporation DaeguRepublic of Korea

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective *** doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) ***-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction *** optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity.

关键词： gas-phase CO_(2) reduction H_(2)O_(2) treatment plasmonic nanoparticles solar fuel photocatalyst surface modification

来源：评论

学校读者我要写书评

暂无评论

Beyond p-y method:A review of artificial intelligence approaches for predicting lateral capacity of drilled shafts in clayey soils

引用

Journal of Rock Mechanics and Geotechnical engineering 2024年第9期16卷 3812-3840页

作者： M.E.Al-Atroush A.E.Aboelela Ezz El-Din Hemdan Civil and Environmental Engineering Program Engineering Management DepartmentCollege of EngineeringPrince Sultan UniversityRiyadhSaudi Arabia Department of Structural Engineering Faculty of EngineeringAin Shams UniversityCairoEgypt Structure and Materials Research Lab Prince Sultan UniversityRiyadhSaudi Arabia Computer Science and Engineering Department Faculty of Electronic EngineeringMenoufia UniversityMenoufiaEgypt

In 2023,pivotal advancements in artificial intelligence(AI)have significantly *** that in mind,traditional methodologies,notably the p-y approach,have struggled to accurately model the complex,nonlinear soil-structure interactions of laterally loaded large-diameter drilled *** study undertakes a rigorous evaluation of machine learning(ML)and deep learning(DL)techniques,offering a comprehensive review of their application in addressing this geotechnical challenge.A thorough review and comparative analysis have been carried out to investigate various AI models such as artificial neural networks(ANNs),relevance vector machines(RVMs),and least squares support vector machines(LSSVMs).It was found that despite ML approaches outperforming classic methods in predicting the lateral behavior of piles,their‘black box'nature and reliance only on a data-driven approach made their results showcase statistical robustness rather than clear geotechnical insights,a fact underscored by the mathematical equations derived from these ***,the research identified a gap in the availability of drilled shaft datasets,limiting the extendibility of current findings to large-diameter *** extensive dataset,compiled from a series of lateral loading tests on free-head drilled shaft with varying properties and geometries,was introduced to bridge this *** paper concluded with a direction for future research,proposes the integration of physics-informed neural networks(PINNs),combining data-driven models with fundamental geotechnical principles to improve both the interpretability and predictive accuracy of AI applications in geotechnical engineering,marking a novel contribution to the field.

关键词： Laterally loaded drilled shaft load transfer and failure mechanisms Physics-informed neural networks(PINNs) P-y curves Artificial intelligence(AI) Dataset

来源：评论

学校读者我要写书评

暂无评论

Ant Colony Optimization-Based Path Planning for Autonomous Vehicle Navigation Systems 4

Ant Colony Optimization-Based Path Planning for Autonomous V...

引用

4th International Conference on electrical engineering and Computer science, ICECOS 2024

作者： Sari, Desi Windi Dwijayanti, Suci Suprapto, Bhakti Yudho Universitas Sriwijaya Faculty of Engineering Department of Electrical Engineering Doctoral Program in Engineering Science Palembang Indonesia Universitas Sriwijaya Faculty of Engineering Department of Electrical Engineering Palembang Indonesia

ISBN: (纸本)9798350368253

A crucial aspect of autonomous vehicles is path planning, which involves using various algorithms to determine the most efficient routes. This study investigates the application of the Ant Colony Optimization (ACO) algorithm to create a system for identifying the shortest path. The process includes collecting coordinate data from specific test locations on the Universitas Sriwijaya Indralaya campus to generate a graph-based map for analysis. The study begins with gathering route data through the Google Maps application, which includes 182 routes. In simulation tests, the routes generated by ACO differ from those suggested by Google Maps;sometimes, the ACO route is longer and sometimes shorter, due to the probabilistic nature of the ACO algorithm in finding optimal routes. The average error compared to Google Maps is 11.7 meters. Additional tests introduce obstacles on the road, requiring the system to find alternative routes. For instance, the initial route from the auditorium to the Faculty of science and Math is 38-39-11-53-110-54-111 with a route length of 670 m. After adding a roadblock in front of the Faculty of engineering, the route changes to 38-39-116-40-70-69-56-111, with a route length of 730 meters. These tests demonstrate that the ACO algorithm effectively identifies the best routes for autonomous vehicles, both under normal conditions and when obstacles are present. © 2024 IEEE.

关键词： Ant colony optimization

来源：评论

学校读者我要写书评

暂无评论

Integrated preparation and manipulation of high‑dimensional flying structured photons

引用

eLight 2024年第1期4卷 185-192页

作者： Haoqi Zhao Yichi Zhang Zihe Gao Jieun Yim Shuang Wu Natalia MLitchinitser Li Ge Liang Feng Department of Electrical and Systems Engineering University of PennsylvaniaPhiladelphiaPA 19104USA Department of Materials Science and Engineering University of PennsylvaniaPhiladelphiaPA 19104USA Department of Electrical and Computer Engineering and Department of Physics Duke UniversityDurhamNC 27708USA Department of Engineering Science and Physics College of Staten IslandCUNYStaten IslandNY 10314USA The Graduate Center CUNYNew YorkNY 10016USA

The hope for a futuristic global quantum internet that provides robust and high-capacity quantum information transfer lies largely on qudits,the fundamental quantum information carriers prepared in high-dimensional superposition ***,preparing and manipulating N-dimensional flying qudits as well as subsequently establishing their entanglement are still challenging tasks,which require precise and simultaneous maneuver of 2(N-1)parameters across multiple degrees of ***,using an integrated approach,we explore the synergy from two degrees of freedom of light,spatial mode and polarization,to generate,encode,and manipulate flying structured photons and their formed qudits in a four-dimensional Hilbert space with high quantum fidelity,intrinsically enabling enhanced noise resilience and higher quantum data *** four eigen spin–orbit modes of our qudits possess identical spatial–temporal characteristics in terms of intensity distribution and group velocity,thereby preserving long-haul coherence within the entirety of the quantum data transmission *** leveraging the bi-photon entanglement,which is well preserved in the integrated manipulation process,we present versatile spin–orbit cluster states in an extensive dimensional Hilbert *** cluster states hold the promise for quantum error correction which can further bolster the channel robustness in long-range quantum communication.

关键词： cluster thereby preparing

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：