检索结果-内蒙古大学图书馆

2024 Conference of Young Researchers in Electrical and electronic Engineering, ElCon 2024

作者： Kulagin, Vladimir Selivanov, Kirill Vlasov, Andrey Aminev, Dmitrii Bunina, Lyudmila Bikovsky, Sergey Moscow Technical University of Communications and Informatics Moscow Russia Bauman Moscow State Technical University Bmstu Department of Design and Technology of Electronic Devices Moscow Russia Russian Technological University - Mirea Department of Development of Software Solutions and System Programming Moscow Russia Russian Technological University - Mirea Department of Electrical Engineering Systems Moscow Russia

ISBN: (纸本)9798350360646

The problem of the rational use of energy resources remains constantly relevant and requires the search for new approaches. One of them is power control. In AC circuits, the authors see the most promising method of phase AC power control. Based on it, a power control module was developed. The structural and circuit diagrams of the developed device are presented to implement the proposed solution. The authors produced its experimental prototype and conducted experimental testing at various levels of regulated power. Savings when using the proposed power control module were calculated using the example of energy consumption in various sectors of energy-intensive systems. According to the data obtained, the module allows saving energy consumption without significant discomfort to the energy user. The calculated results allow concluding that the proposed AC power control module is fully operational, and its widespread use will significantly reduce the need for electricity. © 2024 IEEE.

关键词： energy consumption energy efficiency power control

来源：评论

学校读者我要写书评

暂无评论

Energy Efficiency Improvement System for AC Circuits

Energy Efficiency Improvement System for AC Circuits

引用

IEEE NW Russia Young Researchers in Electrical and electronic Engineering Conference (EIConRusNW)

作者： Vladimir Kulagin Kirill Selivanov Andrey Vlasov Dmitrii Aminev Lyudmila Bunina Sergey Bikovsky Moscow technical university of communications and informatics Moscow Russian Federation Department of Design and Technology of Electronic Devices Bauman Moscow State Technical University BMSTU Moscow Russian Federation Department of Development of software solutions and system programming Russian Technological University – MIREA Moscow Russian Federation Department of Electrical Engineering Systems Russian Technological University – MIREA Moscow Russian Federation

关键词：

来源：评论

学校读者我要写书评

暂无评论

Automatic loop shaping of QFT applied to an active control design

Automatic loop shaping of QFT applied to an active control d...

引用

Mediterranean Conference on Control and Automation

作者： Comasólivas, R. Escobet, T. Quevedo, J. Automatic Control Department Technical University of Catalonia Terrassa Spain Department of Electronic Systems Design and Programming Technical University of Catalonia Terrassa Spain

ISBN: (纸本)9781457701252

This paper presents a methodology to design automatically a QFT (Quantitative Feedback Theory) robust controller for plants with model uncertainty. The method proposed has as objective to find a QFT robust controller that fulfills the control specifications for the whole set of plant models, without including parameter controller restrictions. The methodology is based on a global optimization and has been solved using a global mixed-integer nonlinear programming. The design of an active control for vibration attenuation in optical interferometers is used to validate the technique. © 2011 IEEE.

关键词： Global optimization

来源：评论

学校读者我要写书评

暂无评论

Automatic loop shaping of QFT applied to an active control design

Automatic loop shaping of QFT applied to an active control d...

引用

Mediterranean Conference on Control and Automation (MED)

作者： R. Comasòlivas T. Escobet J. Quevedo Automatic Control Department Technical University of Catalonia Terrassa Spain Department of Electronic Systems Design and Programming Technical University of Catalonia Terrassa Spain

关键词： Interferometers Actuators Frequency control Transfer functions Noise Gain

来源：评论

学校读者我要写书评

暂无评论

Information theoretical approach to minimization of AND/EXOR expressions of switching functions

Information theoretical approach to minimization of AND/EXOR...

引用

4th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting Services, ITELSIKS 1999

作者： Shmerko, V. Popel, D. Stanković, R.S. Cheushev, V. Yanushkevich, S. Department of Computer Aided Design Systems Techinal University of Szczecin Poland Department of Computer Sicience State University of Informatics and Radioelectronics Minks Belarus Department of Computer Science Faculty of Electronic Engineering University of Nis Serbia Department of Programming Technologies State University Minsk Belarus

ISBN: (纸本)078035768X

In modern circuit design, the Shannon decomposition of switching functions is widely used. On the other hand, in information theory of telecommunication, the Shannon entropy used as a measure to represent the information in numerical values, is a key notion. In this paper, we relate these two concepts, belonging to different areas, into an approach to the minimisation of exclusive-or sum-of-products (AND/EXOR) expressions for switching functions. The Shannon decomposition, and the closely related Davio decomposition for AND/EXOR expressions are interpreted in terms of basic concepts in the information theory. Thanks to that, we have proposed an entropy based strategy for minimization of AND/EXOR expressions. We have provided a comparison and an experimental verification of this strategy with some known heuristic minimization strategies using benchmarks. In some cases, our program Info-EXOR produces extremely better results. Moreover, the information theory interpretation of classical decomposition of switching functions offers a new point of view to the existing design styles. © 1999 IEEE.

关键词： Information theory

来源：评论

学校读者我要写书评

暂无评论

CONCURRENT LARGE-SIGNAL SIMULATION OF AN ACTIVE MICROSTRIP ANTENNA

引用

INTERNATIONAL JOURNAL OF NUMERICAL MODELLING-electronic NETWORKS DEVICES AND FIELDS 1995年第1期8卷 3-12页

作者： MCDOWALL, DS FUSCO, VF High Frequency Electronics Laboratory. Department of Electrical and Electronic Engineering The Queen's University of Belfast Ashby Building Stranmillis Road Belfast BT9 5AH U.K. D. Stewart McDowall was born in Dublin Republic of Ireland in 1967. He received the M. Eng. degree in Electrical and Electronic Engineering from the Queen's University of Belfast in 1990. In the same year he was presented with a Distinction Award from the Departmnet of Education of Northern Ireland and he is currently pursuing his Ph.D. in the Microwave Research Group at Q.U.B. His principal research area is the electromagnetic field mapping of microwave systems using concurrent programming. He is an Associate Member of the Institute of Electrical Engineers. Vincent F. Fusco was educated at the Queens's University of Belfast where he obtained the degree of Ph.D. in 1982. He has worked as a research engineer on short-range radar and radio telemetry systems. Currently he is a reader in Microwave Communications in the School of Electrical engineering and Computer Science the Queen's University of Belfast. His current research interests include non-linear microwave circuit simulatino and concurrent programming techniques for electromagnetic field problems with particular emphasis on EMC applications. He has published numerous research papers in these areas. He is the author of the bookMicrowave Circuits Analysis and Computer Aided Design Prentice-Hall 1987. Dr Fusco is a Chartered Electrical Engineer and a Member of the Institute of Electrical Engineers.

This paper details the use of a circuit-based EM modelling technique combined with a harmonic balance simulator used to model the radiation from the microstrip bodies comprising an active antenna circuit. The modelling approach adopted for the planar bodies in the circuit will be shown to allow the use of concurrent algorithms in order to reduce overall computational time.

关键词： Microstrip antennas

来源：评论

学校读者我要写书评

暂无评论

CONCURRENT BOUNDARY-ELEMENT COMPUTATION

引用

INTERNATIONAL JOURNAL OF NUMERICAL MODELLING-electronic NETWORKS DEVICES AND FIELDS 1993年第2期6卷 83-98页

作者： MCDOWALL, DS LEE, TW FUSCO, VF Microwave Research Group Department of Electrical and Electronic Engineering The Queen's University of Belfast Ashby Building Stranmillis Road Belfast BT9 5AH Northern Ireland U.K. D. Stewart McDowall was born in Dublin epublic of Ireland in 1967. He received the M. Eng. degree in Electrical and Electronic Engineering from the Queen's University of Belfast in 1990. In the same year he was presented with a Distinction Award from the Department of Education of Northern Ireland and he is currently pursuing his Ph.D. in the Microwave Research Group at Q.U.B. His principal research area is the electromagnetic field mapping of microwave systems using concurrient programming. He is an Associate Member of the Institute of Electrical Engineers. Lee Thaim Wee was awarded the degree of B. Eng. in Electronics from the Queen's University of Belfast in July 1991. He is currently serving in the Malaysian Armed Forces. Vincent F. Fusco was educated at the Queen's Univeristy of Belfast where he obtained the degree of Ph.D. in 1982. He has worked as a research engineer on short-range radar and radio telementry systems. Currently he is a reader in Microwave Communications in the School of Electrical Engineering and Computer Science the Queen's Univeristy of Belfast. His current research interests include non-linear microwave circuit simulation and concurrent programming techniques for electromagnetic field problems with particular emphasis on EMC applications. He has published numerous research papers in these areas. He is the author of the bookMicrowave Circuits Analysis and Computer Aided Design Prentice-Hall 1987. Dr Fusco is a Chartered Electrical Engineer and a Member of the Institute of Electrical Engineers.

A major limitation of the boundary element method (BEM) for the solution of electrical potential problems is the long computational time required. However, a large portion of the calculations involved can be viewed as being parallel in nature and can therefore be computed concurrently. This paper makes an effort to increase the efficiency of the BEM process using transputer-based multiprocessor computing techniques. The algorithms developed may equally well be applied to any multiprocessor system. The application selected to demonstrate the technique is the solution of an electrostatic problem governed by a two-dimensional Laplace equation. A parallel algorithm for problem setup and field extraction using BEM is designed and implemented on a transputer array. Special attention is directed to the utilization of the parallel processors to achieve maximum efficiency. The analysis in this work concentrates on the communication strategies for passing data between processors as well as a consideration of the workload attributed to each processor. The parallel algorithms were implemented using 3L Parallel Fortran;however, the choice of topology for the overall BEM implementation was limited by the fact that certain parts of the algorithm could only utilize a pipeline configuration of processors. Comprehensive results for the parallel BEM algorithm are given and they are encouraging, indicating that parallel processing has much to offer when applied to the boundary element method.

关键词： Boundary element method

来源：评论

学校读者我要写书评

暂无评论

TLM MODELING USING AN SIMD COMPUTER

引用

INTERNATIONAL JOURNAL OF NUMERICAL MODELLING-electronic NETWORKS DEVICES AND FIELDS 1993年第4期6卷 299-304页

作者： TAN, CC FUSCO, VF The Queen's University of Belfast Department of Electrical & Electronic Engineering Ashby Building Stranmillis Road Belfast BT9 5AH U.K. Chun Chia Tan obtained a first-class honours degree from The Queen's University of Belfast. He was awarded an IEE prize for best final-year project. His current research interests include the modelling of electromagnetic fields using parallel processing techniques. At present Mr Tan is working as an electrical engineer in Malaysia. Vincent F. Fusco was educated at The Queen's University of Belfast where he obtained the degree of Ph.D. He has worked as a research engineer on short-range radar and radio telementry systems. Currently he is a Reader in Microwave Commnications in the School of Electrical Engineering and Computer Science The Queen's Univeristy of Belfast. His current research interests include non-linear microwave circuit simulation and concurrent programming techniques for electromagnetic field problems. He has acted as consultant to a number of major companies and has published numerous research papers in these areas. He is author of the bookMicrowave Circuits Analysis and Computer Aided Design(Prentice Hall 1987). Dr Fusco is a Chartered Electrical Engineer and a Member of the Institute of Electrical Engineers.

A major limitation of the transmission-line matrix (TLM) method used to solve Maxwell's equations is the long computation time required. The TLM scattering calculations involved can, however, be viewed as parallel in nature. This paper describes an effort to reduce computational time by using an SIMD, DAP multiprocessor computer employed to solve a two-dimensional TLM electromagnetic field formulation. A parallel algorithm based on the TLM scattering algorithm is designed and implemented using FORTRAN-PLUS Enhanced on an AMT DAP 510 machine. Here the connectivity of the DAP is exploited to simulate the intrinsic scattering behaviour on which the TLM algorithm relies. The results show that parallel processing on an SIMD machine such as the DAP is advantageous, especially for higher-order mesh sizes.

关键词： Electric lines

来源：评论

学校读者我要写书评

暂无评论

CLEER - AN AI-SYSTEM DEVELOPED TO ASSIST EQUIPMENT ARRANGEMENTS ON WARSHIPS

引用

NAVAL ENGINEERS JOURNAL 1989年第3期101卷 127-137页

作者： ZHOU, HH SILVERMAN, BG SIMKOL, J Dr. H. Harry Zhou:is a research professor at the Institute for Artificial Intelligence of The George Washington University. Dr. Zhou received his master's degree and Ph.D. in computer science from Vanderbilt University in 1984 and 1987 respectively. He did his dissertation in the fields of artificial intelligence analogical reasoning and machine learning. His research interests include: classifier systems genetic algorithms learning by analogy inductive learning adaptive expert systems automated knowledge acquisition and adaption. He is also interested in data base design programming languages mental modeling and software engineering. Dr. Barry G. Silverman:is director of the Institute for Artificial Intelligence and a professor at the Engineering Administration Department of The George Washington University. He is also president of IntelliTek Inc. an AI consulting firm. Dr. Silverman received the B.S.E. M.S.E. and Ph.D. degrees from the University of Pennsylvania. He has been a principal developer of four generic AI products as well as eight AI applications. Since 1979 he has written over 100 papers and reports on these AI efforts. Joel Simkol:is a research scientist currently engaged in designing expert system architectures to support electronic warfare vulnerability analyses threat assessments shipboard topside antenna arrangements and C3countermeasures employment. Mr. Simkol's work in applying expert systems technology to electromagnetic interference and to spectrum management has generated increased interest and participation from all branches of government agencies.

This paper describes a modularized AI system being built to help improve electromagnetic compatibility (EMC) among shipboard topside equipment and their associated systems. CLEER is intended to act as an easy to use integrator of existing expert knowledge and pre-existing data bases and large scale analytical models. Due to these interfaces; to the need for portability of the software; and to artificial intelligence related design requirements (such as the need for spatial reasoning, expert data base management, model base management, track-based reasoning, and analogical (similar ship) reasoning) it was realized that traditional expert system shells would be inappropriate, although relatively off-the-shelf AI technology could be incorporated. In the same vein, the rapid prototyping approach to expert system design and knowledge engineering was not pursued in favor of a rigorous systems engineering methodology. The critical design decisions affecting CLEER's development are summarized in this paper along with lessons learned to date all in terms of “how,” “why,” and “when” specific features are being developed.

关键词： Artificial Intelligence

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：