检索结果-内蒙古大学图书馆

Three-Dimensional Bioprinting of Organs: Modern Trends

Critical Reviews in Biomedical engineering 2022年第3期50卷 19-34页

作者： Abbasov, Iftikhar B. Department of Engineering Graphics and Computer Design Southern Federal University Engineering-Technological Academy Taganrog Russia

The paper presents an overview of some modern technologies for three-dimensional (3D) bioprinting of human tissues and organs. 3D bioprinting of human organs is increasingly used for the production and transplantation of artificial biological organs. Existing technologies of 3D bioprinting using bioink on a special substrate are considered. The features of the production of bioinks using biocompatible polymer compounds, hydrogels are given, some popular modern bioprinters are noted. Modern technologies of bioprinting of tissues of human organs are considered: skin, liver, lungs, heart, brain, existing technological problems in this area are given. Based on the analysis, the future prospects for the development of bioprinting technology for human organs are noted. © 2022 by Begell House, Inc.

关键词： Hydrogels

来源：评论

学校读者我要写书评

暂无评论

Constructing the schematic and mathematical model of the dynamics of a vibratory drum separator 69

Constructing the schematic and mathematical model of the dyn...

引用

69th International Conference on Vibroengineering

作者： Rebot, Dariia Topilnytskyy, Volodymyr Svidrak, Inga Stotsko, Rostyslav Shevchuk, Anzhela Computer Design Systems Department Lviv Polytechnic National University Lviv Ukraine Department of Design Machine and Automotive Engineering Lviv Polytechnic National University Lviv Ukraine Department of Technical Mechanics and Engineering Graphics Lviv Polytechnic National University Lviv Ukraine

A structural diagram of a vibratory drum separator has been developed, and based on it, a mathematical model of the separator’s oscillatory motion has been constructed. The mathematical model was built using nonlinear mechanics methods and Lagrange equations. The obtained dependencies allow for determining the influence of geometric and physico-mechanical parameters on various factors affecting the intensity of the separation process. The research results should be used both at the design stages of vibratory separators and when selecting their parameters and operational modes. © 2024 Dariia Rebot, et al.

关键词： Separators

来源：评论

学校读者我要写书评

暂无评论

Indentation behavior of a semi-infinite piezoelectric semiconductor under a rigid flat-ended cylindrical indenter

引用

Applied Mathematics and Mechanics(English Edition) 2024年第4期45卷 649-662页

作者： Shijing GAO Lele ZHANG Jinxi LIU Guoquan NIE Weiqiu CHEN State Key Laboratory of Mechanical Behavior and System Safety of Traffic Engineering Structures Shijiazhuang Tiedao UniversityShijiazhuang 050043China School of Mechanical Engineering Shijiazhuang Tiedao UniversityShijiazhuang 050043China Hebei Key Laboratory for Mechanics of Intelligent Materials and Structures Department of Engineering MechanicsShijiazhuang Tiedao UniversityShijiazhuang 050043China State Key Laboratory of Computer Aided Design and Computer Graphics Key Laboratory of Soft Machines and Smart Devices of Zhejiang ProvinceDepartment of Engineering MechanicsZhejiang UniversityHangzhou 310027China

This paper theoretically studies the axisymmetric frictionless indentation of a transversely isotropic piezoelectric semiconductor(PSC)half-space subject to a rigid flatended cylindrical *** contact area and other surface of the PSC half-space are assumed to be electrically *** the Hankel integral transformation,the problem is reduced to the Fredholm integral equation of the second *** equation is solved numerically to obtain the indentation behaviors of the PSC half-space,mainly including the indentation force-depth relation and the electric potential-depth *** results show that the effect of the semiconductor property on the indentation responses is limited within a certain range of variation of the steady carrier *** dependence of indentation behavior on material properties is also analyzed by two different kinds of *** element simulations are conducted to verify the results calculated by the integral equation technique,and good agreement is demonstrated.

关键词： piezoelectric semiconductor(PSC) insulating indenter electromechanical response singular integral equation finite element simulation

来源：评论

学校读者我要写书评

暂无评论

Development of a Control System for a Vibratory Lapping-Polishing Machine 28

Development of a Control System for a Vibratory Lapping-Poli...

引用

28th IEEE International Seminar/Workshop on Direct and Inverse Problems of Electromagnetic and Acoustic Wave Theory, DIPED 2023

作者： Korendiy, Vitaliy Kachur, Oleksandr Zakharov, Viktor Department of Technical Mechanics and Engineering Graphics Lviv Polytechnic National University Lviv Ukraine Department of Computer-Aided Design Lviv Polytechnic National University Lviv Ukraine Department of Technical Mechanics and Engineering Graphics Lviv Polytechnic National UniversityGalca Ltd Lviv Ukraine

ISBN: (纸本)9798350315332

Vibratory equipment is widely used in various fields of mechanical, industrial, and manufacturing engineering. Particularly, such machines can be effectively implemented while carrying out finishing technological operations, e.g., glazing, polishing, and lapping of different machine parts. The present paper is focused on developing the control system for the novel design of a vibratory lapping-polishing machine driven by six solenoids. The main purpose consists in providing the circular trajectory of the working member and ensuring the machining uniformity at each point of the surface being treated. In such a case, it is proposed to actuate the solenoids with the specified time shift depending on the forced frequency needed to be provided. The duration of the signal actuating the solenoid is equal to one-sixth of the total duration of a cycle (period) of the working body oscillation. The corresponding control approach is developed and simulated in the Tinkercad application, while the control system is designed based on the Arduino hardware and software. In addition, the laboratory prototype of the vibratory lapping-polishing machine and the corresponding control system are implemented in practice. The performed laboratory studies and experimental tests substantiate the possibilities of generating the circular oscillations of the working member of the vibration-driven lapping-polishing machine. The obtained results may be useful for engineers and technologists dealing with control systems of various vibratory technological equipment based on electromagnetic and solenoid-type drives. © 2023 IEEE.

关键词： Polishing machines

来源：评论

学校读者我要写书评

暂无评论

SGLDBench: A Benchmark Suite for Stress-Guided Lightweight 3D designs

arXiv

引用

arXiv 2025年

作者： Wang, Junpeng Bukenberger, Dennis R. Niedermayr, Simon Neuhauser, Christoph Wu, Jun Westermann, Rüdiger The Computer Graphics & Visualization Group Technische Universität München Garching Germany The Department of Sustainable Design Engineering Delft University of Technology Delft Netherlands

We introduce the Stress-Guided Lightweight design Benchmark (SGLDBench), a comprehensive benchmark suite to apply and evaluate material layout strategies for generating stiff lightweight designs in 3D domains. SGLDBench provides a seamlessly integrated simulation and analysis framework, providing six reference strategies accompanied by a scalable multigrid elasticity solver to efficiently execute these strategies and validate the stiffness of their results. This facilitates systematic analysis and comparison of design strategies regarding the mechanical properties they achieve. SGLDBench enables the evaluation of diverse settings of load conditions and, through the tight integration of the solver, enables support for high-resolution designs and stiffness analysis. Moreover, SGLDBench emphasizes visual analysis to explore relations between the geometric structure of a design and the distribution of stresses, providing insights into the specific properties and behaviors of different design strategies. SGLDBenchs' specific features are highlighted in several experiments, by comparing the results of reference strategies with respect to geometric and mechanical properties. © 2025, CC BY.

关键词： Stiffness

来源：评论

学校读者我要写书评

暂无评论

Enhanced Control System for the Oil Extraction Screw Press

Enhanced Control System for the Oil Extraction Screw Press

引用

International Conference on Perspective Technologies and Methods in MEMS design (MEMSTECH)

作者： Vitaliy Korendiy Oleksandr Kachur Volodymyr Havran Department of Technical Mechanics and Engineering Graphics Lviv Polytechnic National University Lviv Ukraine Department of Computer-Aided Design Lviv Polytechnic National University Lviv Ukraine

ISBN: (数字)9798350378627

ISBN: (纸本)9798350378634

Oil extraction screw presses are widely used in agriculture and food industry. In most cases, they are not equipped with complicated control systems due to the necessity of reducing their price and providing sufficient reliability. Therefore, such presses cannot reach the best efficiency (productivity, performance), while processing different seeds and kernels. The present paper is focused on development of the enhanced control allowing for monitoring the operational parameters of the screw press and adjusting them in accordance with user-defined technologically prescribed ones. The research methodology contains a thorough analysis of the press design and operational peculiarities, and the development of functional (block), circuit, and breadboard diagrams of the control system. In order to verify the initially stated ideas of control strategies, the simulation models of the control systems are implemented in the TinkerCAD and SolidWorks software, and the experimental prototype of the screw press is correspondingly improved. The presented control system and press regulation strategies can be effectively implemented by engineers and technologists while developing new and enhancing existing designs of screw presses.

关键词： Presses Solid modeling Oils Fasteners Control systems Software Regulation

来源：评论

学校读者我要写书评

暂无评论

Development of a Control System for a Vibratory Lapping-Polishing Machine

Development of a Control System for a Vibratory Lapping-Poli...

引用

International Seminar/Workshop on Direct and Inverse Problems of Electromagnetic and Acoustic Wave Theory (DIPED)

作者： Vitaliy Korendiy Oleksandr Kachur Viktor Zakharov Department of Technical Mechanics and Engineering Graphics Department of Computer-Aided Design Lviv Polytechnic National University Lviv Ukraine Department of Technical Mechanics and Engineering Graphics "Galca" Ltd Lviv Polytechnic National University Lviv Ukraine

关键词：

来源：评论

学校读者我要写书评

暂无评论

A Streamline-guided De-Homogenization Approach for Structural design

arXiv

引用

arXiv 2022年

作者： Wang, Junpeng Westermann, Rüdiger Wu, Jun Computer Graphics and Visualization Department of Informatics Technical University of Munich Garching 85748 Germany Department of Sustainable Design Engineering Delft University of Technology Delft2628 CE Netherlands

We present a novel de-homogenization approach for efficient design of high-resolution load-bearing structures. The proposed approach builds upon a streamline-based parametrization of the design domain, using a set of space-filling and evenly-spaced streamlines in the two mutually orthogonal direction fields that are obtained from homogenization-based topology optimization. Streamlines in these fields are converted into a graph, which is then used to construct a quad-dominant mesh whose edges follow the direction fields. In addition, the edge width is adjusted according to the density and anisotropy of the optimized orthotropic cells. In a number of numerical examples, we demonstrate the mechanical performance and regular appearance of the resulting structural designs, and compare them with those from classic and contemporary approaches. Copyright © 2022, The Authors. All rights reserved.

关键词： Structural design

来源：评论

学校读者我要写书评

暂无评论

Stress topology analysis for porous infill optimization

arXiv

引用

arXiv 2021年

作者： Wang, Junpeng Wu, Jun Westermann, Rüdiger Computer Graphics and Visualzation Technical University of Munich Munich Germany Department of Sustainable Design Engineering Delft University of Technology Delft Netherlands

The optimization of porous infill structures via local volume constraints has become a popular approach in topology optimization. In some design settings, however, the iterative optimization process converges only slowly, or not at all even after several hundreds or thousands of iterations. This leads to regions in which a distinct binary design is difficult to achieve. Interpreting intermediate density values by applying a threshold results in large solid or void regions, leading to sub-optimal structures. We find that this convergence issue relates to the topology of the stress tensor field that is simulated when applying the same external forces on the solid design domain. In particular, low convergence is observed in regions around so-called trisector degenerate points. Based on this observation, we propose an automatic initialization process that prescribes the topological skeleton of the stress field into the material field as solid simulation elements. These elements guide the material deposition around the degenerate points, but can also be remodelled or removed during the optimization. We demonstrate significantly improved convergence rates in a number of use cases with complex stress topologies. The improved convergence is demonstrated for infill optimization under homogeneous as well as spatially varying local volume constraints. © 2021, CC BY-NC-ND.

关键词： Stress tensor

来源：评论

学校读者我要写书评

暂无评论

Generation of Entrepreneurship Environments for New Product Development 10th

Generation of Entrepreneurship Environments for New Product ...

引用

10th International Joint Conference on Mechanics, design engineering and Advanced Manufacturing, JCM 2020

作者： Martin-Doñate, Cristina Lucena-Muñoz, Fermín García-Cabrera, Lina Guadalupe Mercado-Colmenero, Jorge Manuel Department of Engineering Graphics Design and Projects University of Jaén Campus Las Lagunillas s/n Jaen23071 Spain Department of Management Marketing and Sociology University of Jaen Campus Las Lagunillas s/n Jaen23071 Spain Department of Computer Sciences University of Jaen Campus Las Lagunillas s/n Jaen23071 Spain

ISBN: (纸本)9783030705657

The economic environment demands companies to be able of innovating and presenting new products and technologies. However, current industrial environments are composed of big established companies, small or medium family businesses and regional clusters. This business map does not comply with the dynamism required for detecting needs and proposals in form of new products that meet the current customer requirements. The creation of start-ups in the field of engineering is considered as a possibility to cover a growing market in designing high technological products. However, despite the importance and economic impact of the start-ups for less industrialized environments the courses in the engineering field do not include activities that contextualize theoretical knowledge and entrepreneurship. The paper presents the results of creating an entrepreneurial environment focused on the student as entrepreneurial unit. In this context, a series of new activities based on new design proposals have been developed on the basis of new technical solutions for industrial companies. The new designs have been presented as minimum viable products. The technical knowledge required for making the new designs has been complemented with entrepreneurial training. The results show an increase in students' willingness to create small companies based in new products as an employment option at the end of their studies. © 2021, The Author(s).

关键词： CAD Entrepreneurship Industrial design Product development

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：