检索结果-内蒙古大学图书馆

arXiv 2023年

作者： Li, Kailai Cao, Ziyu Hanebeck, Uwe D. The Division of Automatic Control Department of Electrical Engineering Linköping University Sweden The Intelligent Sensor-Actuator-Systems Laboratory Institute for Anthropomatics and Robotics Karlsruhe Institute of Technology Germany

We introduce a novel framework of continuous-time ultra-wideband-inertial sensor fusion for online motion estimation. Quaternion-based cubic cumulative B-splines are exploited for parameterizing motion states continuously over time. Systematic derivations of analytic kinematic interpolations and spatial differentiations are further provided. Based thereon, a new sliding-window spline fitting scheme is established for asynchronous multi-sensor fusion and online calibration. We conduct a dedicated validation of the quaternion spline fitting method, and evaluate the proposed system, SFUISE (spline fusion-based ultra-wideband-inertial state estimation), in real-world scenarios using public data set and experiments. The proposed sensor fusion system is real-time capable and delivers superior performance over state-of-the-art discrete-time schemes. We release the source code and own experimental data at https://***/KIT-ISAS/SFUISE . Copyright © 2023, The Authors. All rights reserved.

关键词： Motion estimation

来源：评论

学校读者我要写书评

暂无评论

K-BMPC: Derivative-based Koopman Bilinear Model Predictive control for Tractor-Trailer Trajectory Tracking with Unknown Parameters

arXiv

引用

arXiv 2023年

作者： Wang, Zehao Zhang, Han Wang, Jingchuan Department of Automation Institute of Medical Robotics Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai200240 China

Nonlinear dynamics bring difficulties to controller design for control-affine systems such as tractor-trailer vehicles, especially when the parameters in the dynamics are unknown. To address this constraint, we propose a derivative-based lifting function construction method, show that the corresponding infinite dimensional Koopman bilinear model over the lifting function is equivalent to the original control-affine system. Further, we analyze the propagation and bounds of state prediction errors caused by the truncation in derivative order. The identified finite dimensional Koopman bilinear model would serve as predictive model in the next step. Koopman Bilinear Model Predictive control (K-BMPC) is proposed to solve the trajectory tracking problem. We linearize the bilinear model around the estimation of the lifted state and control input. Then the bilinear Model Predictive control problem is approximated by a quadratic programming problem. Further, the estimation is updated at each iteration until the convergence is reached. Moreover, we implement our algorithm on a tractor-trailer system, taking into account the longitudinal and side slip effects. The open-loop simulation shows the proposed Koopman bilinear model captures the dynamics with unknown parameters and has good prediction performance. Closed-loop tracking results show the proposed K-BMPC exhibits elevated tracking precision with the commendable computational efficiency. The experimental results demonstrate the feasibility of K-BMPC. © 2023, CC BY-NC-SA.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

A Review on Collaborative Robots in Industrial and Service Sectors

A Review on Collaborative Robots in Industrial and Service S...

引用

2022 International Siberian Conference on control and Communications, SIBCON 2022

作者： Sultanov, Ramir Sulaiman, Shifa Li, Hongbing Meshcheryakov, Roman Magid, Evgeni Kazan Federal University Intelligent Robotics Department Kazan Russia Shanghai Jiao Tong University Department of Instrument Science and Engineering Shanghai China V. A. Trapeznikov Institute of Control Sciences Russian Academy of Sciences Cyber-physical Lab Moscow Russia HSE University Moscow Russia

ISBN: (纸本)9781665476287

Today, a collaborative robotics is a rapidly developing area due to its applications in a broad variety of sectors. Collaborative robots (cobots) are robots, which are designed specifically to work along with humans in a common workspace. This article discusses modern cobots employed in industrial and service sectors. Research activities associated with cobots used in virtual environments and real world experiments are described. The ISO/TS 15066:2016 technical specifications followed by cobots for ensuring safety to human operators are emphasized. © 2022 IEEE.

关键词： ISO Standards

来源：评论

学校读者我要写书评

暂无评论

Deep Domain Adaptation Regression for Force Calibration of Optical Tactile Sensors

Deep Domain Adaptation Regression for Force Calibration of O...

引用

IEEE/RSJ International Conference on intelligent Robots and Systems (IROS)

作者： Zhuo Chen Ni Ou Jiaqi Jiang Shan Luo Department of Engineering Robot Perception Lab Centre for Robotics Research King’s College London London United Kingdom State Key Laboratory of Intelligent Control and Decision of Complex Systems Beijing Institute of Technology Beijing China

ISBN: (数字)9798350377705

ISBN: (纸本)9798350377712

Optical tactile sensors provide robots with rich force information for robot grasping in unstructured environments. The fast and accurate calibration of three-dimensional contact forces holds significance for new sensors and existing tactile sensors which may have incurred damage or aging. However, the conventional neural-network-based force calibration method necessitates a large volume of force-labeled tactile images to minimize force prediction errors, with the need for accurate Force/Torque measurement tools as well as a time-consuming data collection process. To address this challenge, we propose a novel deep domain-adaptation force calibration method, designed to transfer the force prediction ability from a calibrated optical tactile sensor to uncalibrated ones with various combinations of domain gaps, including marker presence, illumination condition, and elastomer modulus. Experimental results show the effectiveness of the proposed unsupervised force calibration method, with lowest force prediction errors of 0.102N (3.4% in full force range) for normal force, and 0.095N (6.3%) and 0.062N (4.1%) for shear forces along the x-axis and y-axis, respectively. This study presents a promising, general force calibration methodology for optical tactile sensors.

关键词： Accuracy Force Tactile sensors Lighting Elastomers Data collection Optical imaging Adaptive optics Calibration Optical sensors

来源：评论

学校读者我要写书评

暂无评论

Fault Diagnostic Opportunities for Electromagnetic Coils of Active Magnetic Bearings using Physics-of-Failure Analysis 5

Fault Diagnostic Opportunities for Electromagnetic Coils of ...

引用

5th International Conference on System Reliability and Safety Engineering, SRSE 2023

作者： Li, Ruiqi Wang, Kai Zeng, Peng Cao, Jiwei Chinese Academy of Sciences Key Laboratory of Networked Control Systems Shenyang110016 China Chinese Academy of Sciences Institutes for Robotics and Intelligent Manufacturing Shenyang110169 China University of Chinese Academy of Sciences Beijing100049 China Chinese Academy of Sciences Shenyang Institute of Automation Shenyang110016 China Harbin Institute of Technology Department of Electrical Engineering China

ISBN: (纸本)9798350305944

Active magnetic bearings (AMBs) have many advantages over traditional oil bearings due to their non-contact characteristics. They are environmentally friendly solution and have been proven to be highly reliable and available. Electromagnetic coils are vital components of AMB and they are failure prone. In this paper, the failure mode of magnetic bearing coil and its corresponding failure mechanism are reviewed by FMMEA method, and the existing coil fault diagnosis methods are introduced. Future directions for coil insulation health monitoring aiming at the application characteristics of AMBs are also discussed. © 2023 IEEE.

关键词： Failure analysis

来源：评论

学校读者我要写书评

暂无评论

Canonical Forms in Problems of Estimation

Canonical Forms in Problems of Estimation

引用

International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM)

作者： Alexey Zhirabok Alexader Zuev Alexey Shumsky Department of Automation and Robotics Far Eastern Federal University Vladivostok Russia Department of Artifitial Intelligent Control Institute of Marine Technology Problems Vladivostok Russia Department of Management Far Eastern Federal University Vladivostok Russia

The methods of solving the problems of estimation based on the identification and Jordan canonical forms are suggested. The interval observer, virtual sensor, and sliding mode observer design problems are considered. The methods to solve these problems are developed both for the continuous-time and the discrete-time linear systems under the external disturbance and measurement noise. All the developed methods are based on the reduced order model of the original system invariant with respect to the disturbance. It is shown that the identification canonical form is the best way to solve the problem for the discrete-time systems while Jordan canonical form for the continuous-time systems.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Trajectory Tracking control for Lane Change Maneuvers in Autonomous Vehicles

Trajectory Tracking Control for Lane Change Maneuvers in Aut...

引用

International Conference on control, Automation, robotics and Vision (ICARCV)

作者： Muhammad Shahab Muhammad Faizan Mysorewala Department of Control & Instrumentation Engineering King Fahd University of Petroleum & Minerals (KFUPM) Dhahran Saudi Arabia Department of Control & Instrumentation Engineering Interdisciplinary Research Center for Smart Mobility and Logistics Interdisciplinary Research Center for Intelligent Manufacturing and Robotics King Fahd University of Petroleum and Minerals (KFUPM) Dhahran Saudi Arabia

ISBN: (数字)9798331518493

ISBN: (纸本)9798331518509

This research advances autonomous vehicle capabilities by developing novel trajectory planning and control techniques for lane changes using free-driving and vehicle-following modes. This study addresses the critical challenge of enhancing lane change precision to minimize accident risks on highways. A quintic polynomial is used for trajectory generation, and a PID controller is employed for trajectory tracking, integrating collision prevention strategies for safety assurance. The contributions of this work include the development of an efficient control scheme that adapts to dynamic traffic conditions and improves the robustness of lane-changing maneuvers. The proposed approach significantly enhances the accuracy and reliability of autonomous lane changes, providing a pathway for safer autonomous driving in complex highway scenarios.

关键词： Road transportation Trajectory planning Trajectory tracking Prevention and mitigation Robot sensing systems Robustness Safety Trajectory Vehicle dynamics Autonomous vehicles

来源：评论

学校读者我要写书评

暂无评论

SLAM-Based Joint Calibration of Differential RSS Sensor Array and Source Localization 49

SLAM-Based Joint Calibration of Differential RSS Sensor Arra...

引用

49th Annual Conference of the IEEE Industrial Electronics Society, IECON 2023

作者： Fu, Linya Qiao, Xu Huang, Shoudong Mao, Guoqiang Lin, Zhiyun Li, Youfu Kong, He Robotics Institute Uni. of Technology Sydney Sydney Australia Xidian University State Key Laboratory of Integrated Services Networks China City University of Hong Kong Department of Mechanical Engineering China Southern Uni. of Sci. and Tech. Shenzhen Key Laboratory of Control Theory and Intelligent Systems Shenzhen China Southern Uni. of Sci. and Tech. Guangdong Prov. Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities Shenzhen China

ISBN: (纸本)9798350331820

Sensor arrays generating differential received signal strength (DRSS) measurements have found many applications in robotics. However, accurate calibration of these sensor arrays remains a challenge. Most existing methods are impractical in that they assume to know signal source positions or certain parameters (i.e., path loss exponent), and try to estimate the others. In this paper, we adopt graph simultaneous localization and mapping (SLAM) as a general framework for jointly estimating the source positions and parameters of the DRSS sensor array. Our contributions are twofold. On the one hand, by using a Fisher information matrix approach, we conduct a systematic observability analysis of the corresponding SLAM setup for the calibration problem. On the other hand, we propose an effective procedure to select the initial value which is fed to Levenberg-Marquardt iterations for further improving optimization accuracy and convergence. Extensive simulation and hardware experiments show that the proposed method renders high-quality calibration results. All the codes and data are publicly available at https://***/SUSTech2022/DRSS-sensor-array-calibration. © 2023 IEEE.

关键词： Calibration

来源：评论

学校读者我要写书评

暂无评论

Robust Finite-Time Containment of Networked Heterogeneous Nonlinear Systems with Intermittent Measurement Only

引用

IEEE Transactions on Network Science and Engineering 2025年

作者： Tian, Biao Zhang, Hao Cui, Peiyu Wang, Zhuping Yan, Huaicheng Shanghai Key Laboratory of Wearable Robotics and Human-Machine Interaction Tongji University College of Electronic and Information Engineering Department of Control Science and Engineering Shanghai201804 China Ministry of Education Shanghai Institute of Intelligent Science and Technology National Key Laboratory of Autonomous Intelligent Unmanned Systems Frontiers Science Center for Intelligent Autonomous Systems China East China University of Science and Technology School of Information Science and Engineering Shanghai200237 China

The robust finite-time containment problem of fully heterogeneous multiagent systems with uncertainties is often challenging, especially when only intermittent output measurement is used. To address the issue posed by the nonidentical system dynamics of multiple leaders, which makes the traditional distributed estimator form for the convex hull inapplicable, a distributed finite-time estimator is constructed for each follower to extract the system matrices and states of leaders. Then, in the output-triggering setting, a finite-time extended state observer driven by intermittent output measurement is developed to reconstruct the uncertainties and unmeasurable states of followers. Meanwhile, the non-continuous output measurement will lead to the differentiation of virtual control laws undefined. To solve this issue, a filtering compensation scheme-based finitetime controller via the backstepping technique is developed for nonlinear followers, ensuring practical finite-time stability (PFTS) of the closed-loop system. It is shown that the proposed algorithm steers each follower into the preset convex combination spanned by the positions of multiple leaders. The capability of the exploited control protocol is verified through simulations and experiments. 2013 IEEE.

关键词： Backstepping

来源：评论

学校读者我要写书评

暂无评论

Optimized Task Assignment and Predictive Maintenance for Industrial Machines using Markov Decision Process

arXiv

引用

arXiv 2024年

作者： Nasir, Ali Mekid, Samir Sawlan, Zaid Alsawafy, Omar Control and Instrumentation Engineering Department KFUPM Dhahran Saudi Arabia Mechanical Engineering Department KFUPM Dhahran Saudi Arabia Mathematics Department KFUPM Dhahran Saudi Arabia Systems Engineering Department Dhahran Saudi Arabia Interdisciplinary Research Center for Intelligent Manufacturing and Robotics KFUPM Dhahran Saudi Arabia

This paper considers a distributed decision-making approach for manufacturing task assignment and condition-based machine health maintenance. Our approach considers information sharing between the task assignment and health management decision-making agents. We propose the design of the decision-making agents based on Markov decision processes. The key advantage of using a Markov decision process-based approach is the incorporation of uncertainty involved in the decision-making process. The paper provides detailed mathematical models along with the associated practical execution strategy. In order to demonstrate the effectiveness and practical applicability of our proposed approach, we have included a detailed numerical case study that is based on open source milling machine tool degradation data. Our case study indicates that the proposed approach offers flexibility in terms of the selection of cost parameters and it allows for offline computation and analysis of the decision-making policy. These features create and opportunity for the future work on learning of the cost parameters associated with our proposed model using artificial intelligence. © 2024, CC BY.

关键词： Optimization

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：