检索结果-内蒙古大学图书馆

Advanced Nanocomposites 2025年 2卷 108-123页

作者： Omar Faruk Abbas Ahmed Ashfaqul Hoque Khadem Lu Jia Luyi Sun Department of Materials Science and Engineering Binghamton University State University of New York at Binghamton NY 13902 USA Polymer Program Institute of Materials Science and Department of Chemical & Biomolecular Engineering University of Connecticut Storrs CT 06269 USA Department Mechanical Engineering College of Engineering Computing and Applied Science Clemson University Clemson SC 29634 USA College of Textile Engineering Taiyuan University of Technology Jinzhong Shanxi 030600 China

Thermal comfort is essential for maintaining physiological well-being, with textile materials traditionally serving as the primary medium for regulating heat exchange between the body and its environment. However, conventional textiles often fall short of maintaining optimal thermal balance. So, there is an increasing demand for advanced thermoregulation systems that can effectively reduce heat loss and enhance warmth, ensuring consistent comfort. Recent research has highlighted the promise of advanced functional materials, especially graphene and its composites, for modifying textiles to improve thermal properties. This article comprehensively reviews recent advancements in graphene-functionalized textile composites, focusing on their applications in wearable Joule heaters designed for personalized thermal comfort or thermal therapy. Various graphene-functionalized textile composites are reviewed from the perspectives of material properties, processing strategies and device fabrication methods. Key challenges and future opportunities are summarized for graphene-functionalized textile-based Joule heaters as innovative solutions in wearable thermal regulation.

关键词： Graphene Textile Composite Wearable electronics Joule heater

来源：评论

学校读者我要写书评

暂无评论

Superhydrophobic fluoride conversion coating on bioresorbable magnesium alloy——fabrication,characterization,degradation and cytocompatibility with BMSCs

引用

Journal of Magnesium and Alloys 2021年第4期9卷 1252-1266页

作者： Chunyan Zhanga Shiyu Zhang Dongwei Sun Jiajia Lin Fancheng Meng Huinan Liu School of Materials Science&Engineering Chongqing University of TechnologyNo.69 Hongguang AvenueChongqing 400054China Department of Bioengineering and the Materials Science and Engineering ProgramUniversity of CaliforniaRiverside900 University AvenueMSE 205RiversideCA 92521USA

A micro-nano structure CaF_(2)chemical conversion layer was prepared on fluoride-treated AZ31 alloy,then the composite fluoride conversion film(CaF_(2)/MgF_(2))was modified by stearic acid(SA)and fabricated a superhydrophobic *** fluoride-treated magnesium,fluoride conversion film and superhydrophobic coating were characterized by SEM,EDS,XRD and *** properties of coatings1 adhesion and corrosion resistance were evaluated via tape test and electrochemical *** cytocompatibility of the MgF_(2),CaF_(2)and superhydrophobic CaF_(2)/SA surface was investigated with bone marrow-derived mesenchymal stem cells(BMSCs)by direct culture for 24 *** results showed that the superhydrophobic fluoride conversion coating composed of inner MgF_(2)layer and the outer CaF_(2)/SA composite layer had an average water contact angle of 152°.SA infiltrated into the micro-nano structure CaF_(2)layer and formed a strong adhesion with CaF_(2)***,the super-hydrophobic coating showed higher barrier properties and corrosion resistance compared with the fluoride conversion film and fluoride-treated AZ31 *** BMSC adhesion test results demonstrated MgF_(2)CaF_(2)and CaF_(2)/SA coatings were all nontoxic to *** the condition of in direct contact with cells,MgF_(2)showed higher cell density and enhanced the BMSCs proliferation,while CaF_(2)and CaF_(2)/SA coating showed no statistically difference in cell density compared with glass reference but the CaF_(2)and CaF_(2)/SA coating were not conducive to BMSCs adhesion.

关键词： Biodegradable Magnesium alloy Superhydrophobic Fluoride conversion film Cytocompatibility

来源：评论

学校读者我要写书评

暂无评论

engineering dimensionality of collective dipole-dipole interactions using a nanophotonic environment

Engineering dimensionality of collective dipole-dipole inter...

引用

2023 Conference on Lasers and Electro-Optics, CLEO 2023

作者： Boddeti, Ashwin K. Wang, Yi Juarez, Xitlali Boltasseva, Alexandra Alaeian, Hadiseh Odom, Teri W. Jacob, Zubin Elmore Family School of Electrical and Computer Engineering Birck Nanotechnology Center Purdue University West LafayetteIN47907 United States Graduate Program in Applied Physics Northwestern University EvanstonIL60208 United States Department of Materials Science and Engineering Northwestern University EvanstonIL60208 United States Department of Chemistry Department of Materials Science and Engineering Northwestern University EvanstonIL60208 United States

ISBN: (纸本)9781957171258

We experimentally demonstrate reduced dimensionality in a interacting ensemble of emitters. The well-known stretched exponential decay dynamics, (Equation presented) with β = 0.5 in 3D geometries, is strikingly modified in a nanophotonic environment that supports long-range interaction to β ~ 0.3. © Optica Publishing Group 2023.

关键词： Nanophotonics

来源：评论

学校读者我要写书评

暂无评论

Magnetoelastic coupling driven magnon gap in a honeycomb antiferromagnet

引用

Physical Review B 2024年第10期110卷 104419页

作者： Jeongheon Choe Andrey Baydin Gaihua Ye Bowen Ma Cynthia Nnokwe Martin Rodriguez-Vega David Lujan Swati Chaudhary Fuyang Tay Jiaming He Hiroyuki Nojiri Jianshi Zhou Gregory A. Fiete Junichiro Kono Rui He Xiaoqin Li Department of Physics Center of Complex Quantum Systems Center for Dynamics and Control of Materials Department of Electrical and Computer Engineering Smalley–Curl Institute Department of Physics Applied Physics Graduate Program Smalley–Curl Institute Department of Mechanical Engineering Institute for Materials Research Department of Physics and Astronomy Department of Materials Science and NanoEngineering

Cobalt titanate, CoTiO3, is a honeycomb antiferromagnet recently confirmed experimentally to host Dirac magnons, topological spin-orbit excitons, and chiral phonons. Here, we investigate a magnon gap at the zone center which calls for a refined spin Hamiltonian. We propose a microscopic model for the magnon gap and attribute it to a lattice-distortion (phonon)-induced higher-order spin interaction. Strong magnetoelastic coupling in CoTiO3 is also evident in Raman spectra, in which the magnetic order exerts a stronger influence on phonons corresponding to in-plane ionic motions than those with out-of-plane motions. We further examine the evolution of the zone-center magnons in a high magnetic field up to 18.5 T via THz absorption spectroscopy measurements. Based on this field dependence, we propose a spin Hamiltonian that not only agrees with magnon dispersion measured by inelastic neutron scattering but also includes fewer exchange constants and a realistic anisotropy term. Our work highlights the broad implications of magnetoelastic coupling in the study of topologically protected bosonic excitations.

关键词： Magnetism Magnons Topological materials Raman spectroscopy Terahertz spectroscopy

来源：评论

学校读者我要写书评

暂无评论

Electronically Conducting Titania Single Crystals Prepared by Flash Exhibit Memristor Switching

SSRN

引用

SSRN 2024年

作者： Jo, Seohyeon Raj, Rishi Materials Science Engineering Program Department of Mechanical Engineering University of Colorado Boulder BoulderCO80309 United States

We report memristor behavior in bar shaped single crystals of titania that have been "formed" into electronic conductors. The cycling experiments are carried out with forward and reverse current, rather than voltage;the current experiments are more reproducible. The single crystals permit in-situ measurements of interface as well as the end-to-end resistivities by the four-point method. The total specimen resistance is shown to be nearly equal to the sum of the interface resistances at the positive and negative electrodes referenced at the forming step. The memristor effect arises predominantly from the change in the interfacial resistance at the positive electrode which shows local ratio of high/low resistance of x103. The resistance at the opposite interface remains unchanged. The effect at the positive electrode is attributed to a change in the state of exciton-like electron-hole configurations under the local field induced by the current. The memristor effect is sensitive to crystal-orientation. © 2024, The Authors. All rights reserved.

关键词： Memristors

来源：评论

学校读者我要写书评

暂无评论

Synthesis and characterization of chicken feather derived rachis fiber-bamboo particulate hybrid reinforced epoxy composites for sustainable structural applications

Journal of Responsible Production and Consumption

引用

Journal of Responsible Production and Consumption 2024年第1期1卷 1-17页

作者： Isiaka Oluwole Oladele Omoye Oseyomon Odemilin Samson Oluwagbenga Adelani Anuoluwapo Samuel Taiwo Olajesu Favor Olanrewaju Department of Metallurgical and Materials Engineering Federal University of Technology Akure Akure Nigeria and Department of Chemical and Mining Engineering University of Johannesburg Johannesburg South Africa Department of Metallurgical and Materials Engineering Federal University of Technology Akure Akure Nigeria Department of Materials Science and Engineering Program University of Colorado at Boulder Boulder Colorado USA Department of School of Aerospace Transport and Manufacturing School of Aerospace Transport and Manufacturing Cranfield University Cranfield UK Department of Materials Science and Engineering Iowa State University Ames Iowa USA

Purpose This paper aims to reduce waste management and generate wealth by investigating the novelty of combining chicken feather fiber and bamboo particles to produce hybrid biocomposites. This is part of responsible production and sustainability techniques for sustainable development goals. This study aims to broaden animal and plant fiber utilization in the sustainable production of epoxy resins for engineering applications. Design/methodology/approach This research used two reinforcing materials [chicken feather fiber (CFF) and bamboo particles (BP)] to reinforce epoxy resin. The BPs were kept constant at 6 Wt.%, while the CFF was varied within 3–15 Wt.% in the composites to make CFF-BP polymer-reinforced composite (CFF-BP PRC). The mechanical experiment showed a 21% reduction in densities, making the CFF-BP PRC an excellent choice for lightweight applications. Findings It was discovered that fabricated composites with 10 mm CFF length had improved properties compared with the 15 mm CFF length and pristine samples, which confirmed that short fibers are better at enhancing randomly dispersed fibers in the epoxy matrix. However, the ballistic properties of both samples matched. There is a 40% increase in tensile strength and a 54% increase in flexural strength of the CFF-BP PRC compared to the pristine sample. Originality/value According to the literature review, to the best of the authors’ knowledge, this is a novel study of chicken fiber and bamboo particles in reinforcing epoxy composite.

关键词： Green composite Sustainability Rachis fiber Bamboo particles Clean environment

来源：评论

学校读者我要写书评

暂无评论

Vibrational EELS for Solid-State Li-Ion Batteries: Mapping Li Distributions and Beyond

引用

Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada 2023年第1期29卷 633-635页

作者： Gadre, Chaitanya A. Lee, Tom Qi, Ji Ong, Shyue Ping Pan, Xiaoqing Department of Physics and Astronomy University of California Irvine CA United States Department of Materials Science and Engineering University of California Irvine CA United States Materials Science and Engineering Program University of California San Diego La Jolla CA United States Department of NanoEngineering University of California San Diego La Jolla CA United States Irvine Materials Research Institute University of California Irvine CA United States

来源：评论

学校读者我要写书评

暂无评论

Biomass-Based Discrete Furan Oligomers as materials for Electrochromic Devices

引用

ACS Sustainable Chemistry and engineering 2024年第1期12卷 459-469页

作者： Atayde, Eduardo C. Fong, Guan-Lun Yeh, Jyun-Yi Matsagar, Babasaheb M. Wang, Yu-Cheng Chen, De-Chian Peng, Chi-How Li, Yi-Pei Yamauchi, Yusuke Ho, Kuo-Chuan Wu, Kevin C.-W. Molecular Science and Technology Program Taiwan International Graduate Program (TIGP-MST) Academia Sinica No. 128 Sec. 2 Academia Road Taipei 11529 Taiwan Department of Chemistry National Tsing Hua University No. 101 Sec. 2 Kuang-Fu Road Hsinchu 30013 Taiwan Department of Chemical Engineering National Taiwan University No. 1 Sec. 4 Roosevelt Road Taipei 10617 Taiwan Sustainable Chemical Science and Technology Program Taiwan International Graduate Program (TIGP-SCST) Academia Sinica No. 128 Sec. 2 Academia Road Taipei 11529 Taiwan School of Chemical Engineering and Australian Institute for Bioengineering and Nanotechnology (AIBN) The University of Queensl Brisbane 4072 QLD Australia Department of Materials Process Engineering Graduate School of Engineering Nagoya University Nagoya 464-8603 Japan Institute of Polymer Science and Engineering National Taiwan University No.1 Sec. 4 Roosevelt Rd. Taipei 10617 Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University No. 135 Yuandong Rd. Taoyuan 320 Taiwan

Electrochromic devices (ECDs) are materials that can undergo reversible changes in transmittance when exposed to different applied potentials. While many conjugated heterocyclic oligomers, such as oligothiophenes, have been developed for this purpose, there is no reported study on the use of discrete oligomeric furans as ECD materials. In this work, we introduce a furan trimer that can be utilized as a discrete electrochromic material, which transitions from light yellow to red and has a very high coloration efficiency of 1940 cm²/C at 507 nm. We propose that the reversible π-stack formation of the oligomer radical cations is behind this phenomenon, as evidenced by both experimental and computational results. The derivability of this oligomer from biomass and its facile synthesis make it an interesting alternative for other existing organic electrochromic materials. © 2023 American Chemical Society

关键词： electrochromism furan oligomer hydroxyalkylation−alkylation reaction solvatochromism π-stacks

来源：评论

学校读者我要写书评

暂无评论

Thermal energy dependent transient permittivity of epsilon-near-zero material

引用

science China(Physics,Mechanics & Astronomy) 2022年第8期65卷 96-101页

作者： Heng Wang Lixun Sun Kang Du Wending Zhang SooJin Chua Guixin Li Ting Mei MOE Key Laboratory of Material Physics and Chemistry under Extraordinary Conditions and Shaanxi Key Laboratory of Optical Information TechnologySchool of Physical Science and TechnologyNorthwestern Polytechnical UniversityXi’an710129China Department of Materials Science and Engineering Southern University of Science and TechnologyShenzhen518055China Shenzhen Institute for Quantum Science and Engineering Southern University of Science and TechnologyShenzhen518055China Department of Electrical and Computer Engineering National University of SingaporeSingapore117583Singapore LEES Program Singapore-MIT Alliance for Research&Technology(SMART)Singapore138602Singapore

Transparent conductive oxides exhibit attractive optical nonlinearity with ultrafast response and giant refractive index change near the epsilon-near-zero(ENZ) wavelength, originating from the intraband dynamics of conduction electrons. The optical nonlinearity of ENZ materials has been explained by using the overall-effective-mass and the overall-scattering-time of electrons in the extended Drude model. However, their response to optical excitation is yet the last building block to complete the theory. In this paper, the concept of thermal energy is theoretically proposed to account for the total energy of conduction electrons exceeding their thermal equilibrium value. The time-varying thermal energy is adopted to describe the transient optical response of indium-tin-oxide(ITO), a typical ENZ material. A spectrally-resolved femtosecond pump-probe experiment was conducted to verify our theory. By correlating the thermal energy with the pumping density, both the giant change and the transient response of the permittivity of ITO can be predicted. The results in this work provide a new methodology to describe the transient permittivities of ENZ materials, which will benefit the design of ENZ-based nonlinear photonic devices.

关键词： epsilon-near-zero optical nonlinearity transient response thermal energy hot electron indium tin oxide

来源：评论

学校读者我要写书评

暂无评论

Effect of Concentration and Residence Time of Joncryl■ADR4368 on Melt Processability of Poly(3-hydroxybutyrate)

引用

Journal of Renewable materials 2024年第12期12卷 2079-2094页

作者： Jéssica da Silva Chagas JoséElson Soares Filho Natália Fernanda Inocêncio Silva Marcelo Massayoshi Ueki Eliton Souto de Medeiros Renate Maria Ramos Wellen Mauricio Pinheiro de Oliveira Gelsoneide da Silva Gois Yêda Medeiros Bastos de Almeida Amélia S.F.Santos Post-Graduation Program in Materials Engineering(PPCEM) Federal University of Paraíba(UFPB)João PessoaPB 58051-900Brazil Laboratory of Materials and Biosystems(LAMAB) Federal University of Paraíba(UFPB)João PessoaPB 58051-900Brazil Department of Materials Engineering Federal University of Sergipe(UFS)Jardim Rosa ElzeSão CristóvãoSE 49100-000Brazil Institute of Science and Technology Federal University of São Paulo(UNIFESP)São Josédos CamposSP 12231-280Brazil Department of Chemical Engineering Federal University of Pernambuco(UFPE)Cidade UniversitáriaRecifePE 50670-901Brazil

Poly(3-hydroxybutyrate)(PHB)is a biothechnological and biodegradable thermoplastic polymer from the polyhydroxyalkanoates(PHAs)family,whose chain regularity,high molecular weight,and physical and mechanical properties comparable to polypropylene(PP)are characteristics that have made PHB a prominent commercial ***,its susceptibility to thermal degradation and hydrolysis has limited many *** address the challenges associated with processing,a random copolymer of 95.86 mol%3-hydroxybutyrate and 4.14 mol%3-hydroxyvalerate(referred as PHB)was compounded without(neat PHB)and with 0.25,0.5,1,and 1.5 wt%of chain extender(Joncryl■ADR 4368),consisting of multifunctional epoxy groups,and melt mixed in an internal mixer at 170℃,50 rpm,and residence times of 5,10,and 15 *** effect of chain extender concentration and residence time on the effectiveness of Joncryl■ADR 4368 to recover the pristine PHB properties were investigated through torque rheometry,melt flow index(MFI),differential scanning calorimetry(DSC),tensile testing,and thermogravimetric *** results indicated that an increase in residence time strongly influenced the prevalence of thermomechanical degradation reactions over chain extension reactions of PHB during processing in the molten *** residence times favored chain extension,while longer times favored chain *** trend led to no enhancement of PHB mechanical properties processed for 10 and 15 min,regardless of additive content *** flow index,thermogravimetric analysis and tensile strength exhibited an asymptotic behavior with the increase in additive concentration,exhibiting a noteworthy improvement in tensile strength and temperature at the highest rate of thermal degradation(TMAX),and a decrease in melt flow index of neat PHB with only 0.25 wt%of additive mixed for 5 *** results found in this work allow additional data for processing PHB by manipulating the ratios of multifunctional chain

关键词： PHB chain extender degradation epoxy groups viscosity

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：