检索结果-内蒙古大学图书馆

Concentrated ternary ether electrolyte allows for stable cycling of a lithium metal battery with commercial mass loading high-nickel NMC and thin anodes

引用

Carbon Energy 2023年第3期5卷 2-18页

作者： Jun Yang Xing Li Ke Qu Yixian Wang Kangqi Shen Changhuan Jiang Bo Yu Pan Luo Zhuangzhi Li Mingyang Chen Bingshu Guo Mingshan Wang Junchen Chen Zhiyuan Ma Yun Huang Zhenzhong Yang Pengcheng Liu Rong Huang Xiaodi Ren David Mitlin School of New Energy and Materials Southwest Petroleum UniversityChengduChina Energy Storage Research Institute Southwest Petroleum UniversityChengduChina Shenzhen Key Laboratory of Nanobiomechanics Shenzhen Institutes of Advanced TechnologyChinese Academy of SciencesShenzhenChina China Key Laboratory of Polar Materials and Devices(MOE) Department of ElectronicsEast China Normal UniversityShanghaiChina Materials Science Program and Texas Materials Institute The University of Texas at AustinAustinTexasUSA Beijing Computational Science Research Center BeijingChina School of Materials Science and Engineering Center for Green Innovation University of Science and Technology BeijingBeijingChina Department of Materials Science and Engineering Hefei National Research Center for Physical Sciences at the MicroscaleUniversity of Science and Technology of ChinaHefeiAnhuiChina

A new concentrated ternary salt ether-based electrolyte enables stable cycling of lithium metal battery(LMB)cells with high-mass-loading(13.8 mg cm^(−2),2.5 mAh cm^(−2))NMC622(LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2))cathodes and 50μm Li ***“CETHER-3,”this electrolyte is based on LiTFSI,LiDFOB,and LiBF4 with 5 vol%fluorinated ethylene carbonate in 1,***-cial carbonate and state-of-the-art binary salt ether electrolytes were also tested as *** CETHER-3,the electrochemical performance of the full-cell battery is among the most favorably reported in terms of high-voltage cycling *** example,LiNi_(x)Mn_(y)Co_(1-x-y)O_(2)(NMC)-Li metal cells retain 80%capacity at 430 cycles with a 4.4 V cut-off and 83%capacity at 100 cycles with a 4.5 V cut-off(charge at C/5,discharge at C/2).According to simulation by density functional theory and molecular dynamics,this favorable performance is an outcome of enhanced coordination between Li^(+)and the solvent/salt *** advanced microscopy(high-resolution transmission electron microscopy,scanning electron microscopy)and surface science(X-ray photoelectron spectroscopy,time-of-fight secondary ion mass spectroscopy,Fourier-transform infrared spectroscopy,Raman spectroscopy),it is demonstrated that a thinner and more stable cathode electrolyte interphase(CEI)and solid electrolyte interphase(SEI)are *** CEI is rich in lithium sulfide(Li_(2)SO_(3)),while the SEI is rich in Li_(3)N and *** cycling,the CEI/SEI suppresses both the deleterious transformation of the cathode R-3m layered near-surface structure into disordered rock salt and the growth of lithium metal dendrites.

关键词： concentrated electrolyte density functional theory ether electrolyte high‐nickel cathode high‐voltage battery molecular dynamics

来源：评论

学校读者我要写书评

暂无评论

Design and development of an integrated enset processing machine suitable for central highland farmers of west shewa zone Ethiopia

引用

Discover Agriculture 2025年第1期3卷 1-26页

作者： Jima, Beka Adugna Kolhe, Kishor Purushottam Jiru, Moera Gutu Agricultural Machinery Engineering Program Department of Mechanical Engineering School of Mechanical Chemical and Materials Engineering at Adama Science and Technology University Adama Ethiopia Department of Mechanical Engineering School of Mechanical Chemical and Materials Engineering at Adama Science and Technology University Adama Ethiopia

The development of Integrated Enset processing technology is significant for the easy availability of stable food in the current condition for fulfilling the pangs of hunger in Ethiopia, currently; individual manual technologies such as decortication, corm granting, bulla extraction, and fermenting techniques eventually contribute to utilizing food security such as Kocho, which is not affordable for the marginal farmers of Ethiopia. However, there is a lack of integrated compromise of the all-function process of corm granting, decortication, and pulverization in one machine wholesome of the product such as Kocho, and bulla within consuming time and labor. Therefore, it is decided to design and develop an integrated enset processing machine for central high land of Ethiopian farmers with high-quality production. The physical and mechanical properties of the enset is studied to get an efficient and robust design of the various components. The overall design and development of proposed machine components were carried out at Adama science and Technology University, Ethiopia by using ANSYS 2023 R1 software by considering the engineering economics and material specifications as per ASTM standards. The process parameters of the proposed machine are identified as feed rate, drum speed, concave to drum clearance, power requirement, etc. Also, the enset characteristics were considered as decorticating and granting, fiber cutting resistance, fiber length, dimension, shape, and weight. The overall developed enset integrated machine assembles are analyzed for granting and decorticating with drum clearance and bulla extraction throughput capacity, reliability, simplicity, safety, and overall cost. The machine's safety from a Design Perspective is checked and validated by a simulation study on the critical parts subjected to higher stresses. The cost of available individual decorticators, granting, pulverized, and bulla squeezer machines is costly to the farmer’s community. Theref

关键词：

来源：评论

学校读者我要写书评

暂无评论

Electrochemical and Structural Characterization of Electropolymerized Composite of NH2-Graphene and Polyaniline

Electrochemical and Structural Characterization of Electropo...

引用

2023 IEEE International Conference on Agrosystem engineering, Technology and Applications, AGRETA 2023

作者： Pa-A, Jonathan E. Enriquez, Erwin P. Silliman University Department of Chemistry Dumaguete City6200 Philippines Ateneo de Manila University School of Science and Engineering Department of Chemistry and Program in Materials Science and Engineering Quezon City1108 Philippines

ISBN: (纸本)9798350347333

The NH2-graphene/polyaniline composites are synthesized by in situ electropolymerization of aniline monomer and NH2-functionalized graphene ('NH2-graphene') sheets in acidic electrolyte solution by constant-potential coulometry. Cyclic voltammetry and FTIR analyses confirm the covalent attachment of polyaniline backbone onto NH2-graphene in the composite. Having the same functional moieties (NH2-group), the polyaniline nanofibers are grafted laterally forming 'synapses' resulting in improved charge-transfer reaction and stability of the composite. This link is believed to be 'phenazine-like' microstructure formed at the edges of graphene sheets as evidenced by SEM and TEM images. The voltammograms of the NH2-graphene/polyaniline composite films coated onto pencil lead graphite electrodes (PLGE) exhibit remarkable increase in the current density relative to the bare PLGE and polyaniline-coated PLGEs. Based on the electrochemical impedance spectroscopy (EIS) measurements, the enhancement in the electrochemical properties of the composite may be due to the good chargetransfer redox activity of polyaniline fibers that are grafted onto the NH2-graphene sheet. The composite film also demonstrated photo-responsive property which could be useful for sensing or photovoltaic cell design. © 2023 IEEE.

关键词： Electrochemical impedance spectroscopy

来源：评论

学校读者我要写书评

暂无评论

In situ Observation of Lithium Stripping and Plating Process in an Open-cell All-solid-state Lithium Metal Battery

引用

Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada 2023年第1期29卷 1287-1288页

作者： Wu, C. Zhao, L. Ai, Q. Risal, S. Lou, J. Yao, Y. Fan, Zheng Materials Science and Engineering Program and Texas Center for Superconductivity at the University of Houston University of Houston Houston TX United States Department of Electrical and Computer Engineering University of Houston Houston TX United States Department of Materials Science and Nano Engineering Rice University Houston TX United States Department of Engineering Technology University of Houston Houston TX United States

来源：评论

学校读者我要写书评

暂无评论

Reactive surface intermediates over Ni-grafted TiO2 nanotube arrays towards hydrogen evolution reaction in alkaline and chloride media

引用

International Journal of Hydrogen Energy 2023年第81期48卷 31479-31490页

作者： Cheshideh, Hamed Chen, Hsueh-Yu Liao, Kuo-Wei Wang, Kai-Chin Chen, Guan-Cheng Huang, Hsin-Chih Wang, Chen-Hao Department of Materials Science and Engineering National Taiwan University of Science and Technology Taipei106335 Taiwan Global Development Engineering Program National Taiwan University of Science and Technology Taipei106335 Taiwan Advanced Manufacturing Research Center National Taiwan University of Science and Technology Taipei106335 Taiwan

In this study, the Ni nanoparticles grafted TiO2 nanotubes electrode improved by surface reconstruction (s-Ni/TiO2/Ti) shows the facile hydrogen evolution reaction (HER) in the alkaline and chloride solutions. Nickel nanoparticles were electrochemically grafted on the anodic TiO2 nanotubes under different conditions. The heat treatment of TiO2 nanotubes contributes to the enhancement of electrical conductivity and template adherence. The surface reconstruction is indicated to create heterojunction intermediates, Ni(OH)2 and NiOOH, on the surface of Ni nanoparticles. An extremely low overpotential of 126 mV is required for HER on the s-Ni/TiO2/Ti electrode in 1.0 M KOH solution, showing higher activity than Pt/C. Besides, the developed electrode exhibits an overpotential of 127 mV for HER in 1.0 M KOH + 0.5 M NaCl solution. The long-term stability over 100 h suggests a highly active and inexpensive material choice for substituting the precious electrocatalysts in corrosive media such as seawater. © 2023 Hydrogen Energy Publications LLC

关键词： Titanium dioxide

来源：评论

学校读者我要写书评

暂无评论

Continuous Lithium-Ion Extraction From Seawater and Mine Water With a Fuel Cell System and Ceramic Membranes

引用

Energy & Environmental materials 2024年第6期7卷 254-261页

作者： Cansu Kök Lei Wang Jean Gustavo A.Ruthes Antje Quade Matthew E.Suss Volker Presser INM–Leibniz Institute for New Materials Campus D2266123Saarbr¨uckenGermany Department of Materials Science&Engineering Saarland UniversityCampus D2266123Saarbr¨uckenGermany Leibniz Institute for Plasma Science and Technology Felix-Hausdorff-Straße 217489GreifswaldGermany Faculty of Mechanical Engineering Technion–Israel Institute of TechnologyHaifa3200003Israel Wolfson Department of Chemical Engineering Technion–Israel Institute of TechnologyHaifa3200003Israel Grand Technion Energy Program Technion–Israel Institute of TechnologyHaifa3200003Israel Saarene–Saarland Center for Energy Materials and Sustainability Campus C4266123Saarbr¨uckenGermany

The demand for electronic devices that utilize lithium is steadily increasing in this rapidly advancing technological *** high-purity lithium in an environmentally friendly way is challenging by using commercialized ***,we propose the first fuel cell system for continuous lithium-ion extraction using a lithium superionic conductor membrane and advanced *** fuel cell system for extracting lithium-ion has demonstrated a twofold increase in the selectivity of Li^(+)/Na^(+)while producing *** data show that the fuel cell with a titania-coated electrode achieves 95%lithium-ion purity while generating 10.23 Wh of energy per gram of *** investigation revealed that using atomic layer deposition improved the electrode's uniformity,stability,and electrocatalytic *** 2000 cycles determined by cyclic voltammetry,the electrode preserved its stability.

关键词： atomic layer deposition cation selectivity electrochemical lithium-ion extraction fuel cell

来源：评论

学校读者我要写书评

暂无评论

Environmentally-friendly alkaline ionized water pretreatment and hydrolysis of macroalga via microwave-assisted heating to improve monosaccharide yield for bioethanol production

引用

Process Safety and Environmental Protection 2024年 189卷 702-713页

作者： Chen, Wei-Hsin Liu, Li-Xuan Khoo, Kuan Shiong Sheen, Herng-Kuang Kwon, Eilhann E. Saravanakumar, Ayyadurai Chang, Jo-Shu Department of Aeronautics and Astronautics National Cheng Kung University Tainan701 Taiwan Research Center for Smart Sustainable Circular Economy Tunghai University Taichung407 Taiwan Department of Mechanical Engineering National Chin-Yi University of Technology Taichung411 Taiwan International Master Degree Program on Energy National Cheng Kung University Tainan701 Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University Taoyuan Taiwan Sugar Business Division Taiwan Sugar Corporation Taiwan701 Taiwan Department of Earth Resources and Environmental Engineering Hanyang University Seoul04763 Korea Republic of Directorate of Research SRM Institute of Science and Technology Chengalpattu District Tamil Nadu Kattankulathur603203 India Department of Chemical Engineering and Materials Science College of Engineering Tunghai University Taichung Taiwan Department of Chemical Engineering National Cheng Kung University Tainan Taiwan

This study synthesizes three sequential steps: pretreatment, acid hydrolysis, and enzyme hydrolysis for bioethanol and hydrochar production from macroalga Gracilaria. The Taguchi method is employed separately in each step to optimize relevant operating factors, aiming to maximize the monosaccharide yield. During pretreatment, environmentally friendly alkaline ionized water is utilized as it does not contain chemical additives. Afterward, microwave-assisted hydrolysis is adopted to enhance the monosaccharide yield of the macroalga for bioenergy production. The results show that the total sugar of Gracilaria undergoing acid hydrolysis alone is 28.72 g‧L−1. The total sugar content after alkaline pretreatment followed by acid hydrolysis is 32.64 g‧L−1, and it increases to 34.76 g‧L−1 after adding enzymes. Meanwhile, the higher heating value of Gracilaria increases from 10.884 MJ‧kg−1 to 12.620 MJ‧kg−1 after undergoing alkaline pretreatment. After the acid and enzyme hydrolysis processes, it increases to 15.164 MJ‧kg−1. The solid biofuel's calorific value increases by 39 % from the three-stage processes. The liquid product combined with Saccharomyces cerevisiae can produce bioethanol, while the produced hydrochar can be used as a solid fuel. This research promotes the development of macroalgal biomass for energy and environmental applications, thereby advancing the circular bioeconomy. © 2024 The Institution of Chemical Engineers

关键词： Ethanol

来源：评论

学校读者我要写书评

暂无评论

Photocatalytic bio-inspired PDA-RGO/g-C3N4 nanocomposite incorporated PES membrane for removal of environmental antibiotic pollutants

引用

Journal of Chemical Technology and Biotechnology 2024年第6期99卷 1401-1413页

作者： Govardhanan, B. GokulaKrishnan, S.A. Arthanareeswaran, G. Ashok, M. Chen, Yong-Song Taweepreda, W. Membrane Research Laboratory Department of Chemical Engineering National Institute of Technology Tiruchirappalli Tiruchirappalli India New Generation Materials lab Department of Physics National Institute of Technology Tiruchirappalli Tiruchirappalli India Department of Mechanical Engineering and Advanced Institute of Manufacturing with High-tech Innovations National Chung Cheng University Chiayi County Taiwan Polymer Science Program Division of Physical Science Faculty of Science Prince of Songkla University Hat-Yai Thailand

BACKGROUND: Membrane technology makes it more suitable for the treatment of environmental polluted organic wastewater. Membrane fouling is one of the major concerns in commercial membranes. To overcome this issue, photocatalytic nanomaterials are embedded into the membrane to enhance its surface nature and reusability. In this investigation, polydopamine functionalized graphene oxide (PDA-RGO), graphite carbon nitride (g-C3N4) and PDA-RGO/g-C3N4 nanomaterials were incorporated within polyethersulfone membrane fabricated via a phase inversion technique. These as-prepared membranes’ functional groups and surface morphologies were investigated by Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM) and field emission electron microscopy (FESEM). These as-prepared membranes were investigated for photocatalytic activity under visible-light-driven photodegradation by environmental pollutants such as Rhodamine B (RhB) and Norfloxacin (NOR). RESULTS: Compared with pristine PES membrane, the PDA-RGO/g-C3N4-PES nanocomposite membrane showed higher photocatalytic activity for Rhodamine B 94.6% and Norfloxacin 96.8%, also reached greater water flux 189 L m−2 h−1. Therefore, the bio-inspired nanocomposite-modified PDA-RGO/g-C3N4 photocatalytic membrane could have huge potential in processing environmentally polluted water. CONCLUSIONS: PDA-RGO/g-C3N4-PES nanocomposite membrane improved the membrane hydrophilicity, water flow, anti-fouling performance, rejection studies and photocatalytic degradation than the pristine membrane. The synergistic result of PDA-RGO and g-C3N4 exhibits better photodegradation efficiency of the membrane towards environmental pollutants. © 2024 Society of Chemical Industry (SCI). © 2024 Society of Chemical Industry (SCI).

关键词： Nanocomposites

来源：评论

学校读者我要写书评

暂无评论

Understanding the stability of advanced inorganic-organic hybrid thin films for advanced resist applications 41

Understanding the stability of advanced inorganic-organic hy...

引用

Advances in Patterning materials and Processes XLI 2024

作者： Le, Dan N. Chu, Thi Thu Huong Kim, Jin-Hyun Veyan, Jean-Francois Lee, Won-Il Tiwale, Nikhil Lee, Minjong Choi, Seungsoo Woo, Jihoon Nam, Chang-Yong Choi, Rino Kim, Jiyoung Department of Materials Science and Engineering University of Texas at Dallas RichardsonTX75080 United States Department of Materials Science and Chemical Engineering Stony Brook University Stony BrookNY11794 United States Center for Functional Nanomaterials Brookhaven National Laboratory UptonNY11973 United States Department of Electrical and Computer Engineering University of Texas at Dallas RichardsonTX75080 United States Program in Enviromental and Polymer Engineering Inha University Incheon22212 Korea Republic of Department of Materials Science and Engineering Inha University Incheon22212 Korea Republic of

ISBN: (纸本)9781510672208

In this study, we focus on examining the stability of Al-based inorganic-organic hybrid thin films deposited through the molecular atomic layer deposition (MALD) process in ambient environment. Our observations reveal an initial reduction in material thickness within the first 3 days, followed by a period of stability. XPS analysis is employed to further investigate the chemical alternations in the aged Al-based hybrid thin films, revealing an increase in C=O species as well as overall oxygen content in the material. We also evaluate the effects of atmospheric exposure on the sensitivity of the Al-based hybrid thin films using electron flood exposure. This study aims to enhance the understanding of the stability of a vapor-phase synthesized hybrid thin film system for advanced resist applications. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.

关键词： Atomic layer deposition

来源：评论

学校读者我要写书评

暂无评论

Neuromodulation of the peripheral nervous system:Bioelectronic technology and prospective developments

引用

BMEMat(BioMedical engineering materials) 2024年第1期2卷 88-114页

作者： Hayoung Song Moohyun Kim Enji Kim Jakyoung Lee Inhea Jeong Kyeonghee Lim Seoung Young Ryu Myoungjae Oh Younhee Kim Jang-Ung Park Department of Materials Science and Engineering Yonsei UniversitySeoulSouth Korea Center for Nanomedicine Institute for Basic Science(IBS)SeoulSouth Korea Department of Neurosurgery Yonsei University College of MedicineSeoulSouth Korea Graduate Program of Nano Biomedical Engineering(NanoBME) Advanced Science InstituteYonsei UniversitySeoulSouth Korea

The peripheral nervous system(PNS)is a fascinatingly complex and crucial component of the human body,responsible for transmitting vital signals throughout the body's intricate network of *** efficient functioning is paramount to our health,with any dysfunction often resulting in serious medical conditions,including motor disorders,neurological diseases,and psychiatric *** strides in science and technology have made neuromodulation of the PNS a promising avenue for addressing these health *** involves modifying nerve activity using a range of techniques,such as electrical,chemical,optical,and mechanical *** plays a critical role in this effort,allowing for precise,controlled,and sustained stimulation of the *** paper provides an overview of the PNS,discusses the current state of neuromodulation devices,and presents emerging trends in the field,including advances in wireless power transfer and materials,that are shaping the future of neuromodulation.

关键词： bioelectronics neuromodulation peripheral nervous system

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：