检索结果-内蒙古大学图书馆

Continuous Lithium-Ion Extraction From Seawater and Mine Water With a Fuel Cell System and Ceramic Membranes

Energy & Environmental materials 2024年第6期 258-265页

作者： Cansu K?k Lei Wang Jean Gustavo A.Ruthes Antje Quade Matthew E.Suss Volker Presser INM-Leibniz Institute for New Materials Department of Materials Science & Engineering Saarland University Leibniz Institute for Plasma Science and Technology Faculty of Mechanical Engineering Technion-Israel Institute of Technology Wolfson Department of Chemical Engineering Technion-Israel Institute of Technology Grand Technion Energy Program Technion-Israel Institute of Technology Saarene-Saarland Center for Energy Materials and Sustainability

The demand for electronic devices that utilize lithium is steadily increasing in this rapidly advancing technological *** high-purity lithium in an environmentally friendly way is challenging by using commercialized ***,we propose the first fuel cell system for continuous lithium-ion extraction using a lithium superionic conductor membrane and advanced *** fuel cell system for extracting lithium-ion has demonstrated a twofold increase in the selectivity of Li+/Na+while producing electricity.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Automated classification of big X-ray diffraction data using deep learning models

引用

npj Computational materials 2023年第1期9卷 169-180页

作者： Jerardo E.Salgado Samuel Lerman Zhaotong Du Chenliang Xu Niaz Abdolrahim Materials Science program University of RochesterRochesterNew York 14627USA Department of Computer Science University of RochesterRochesterNew York 14627USA Department of Mechanical Engineering University of RochesterRochesterNew York 14627USA Laboratory for Laser Energetics University of RochesterRochesterNew York 14627USA

In current in situ X-ray diffraction(XRD)techniques,data generation surpasses human analytical capabilities,potentially leading to the loss of *** techniques require human intervention,and lack the performance and adaptability required for material *** the critical need for high-throughput automated XRD pattern analysis,we present a generalized deep learning model to classify a diverse set of materials’crystal systems and space *** our approach,we generate training data with a holistic representation of patterns that emerge from varying experimental conditions and crystal *** also employ an expedited learning technique to refine our model’s expertise to experimental *** addition,we optimize model architecture to elicit classification based on Bragg’s Law and use evaluation data to interpret our model’s *** evaluate our models using experimental data,materials unseen in training,and altered cubic crystals,where we observe state-of-the-art performance and even greater advances in space group classification.

关键词： Automate classify cubic

来源：评论

学校读者我要写书评

暂无评论

Effect of Sn addition on electrochemical activity of ribbons of Mg-Al-Ca anode material for rechargeable magnesium batteries fabricated by rapid solidification

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2025年第1期75卷 9-13页

作者： Fukuta, Yoshitaka Kikura, Kensei Tsukeda, Tadayoshi Aida, Tetsuo Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama 3190 Gofuku Toyama-shi Toyama930-8555 Japan Graduate School of Science and Engineering University of Toyama Toyama-shi Toyama Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama-shi Toyama Japan CHUETSU METAL WORKS CO. LTD. Nakaniikawagun Toyama Japan Saitama Industrial technology Center Kawaguchi-shi Saitama Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Imizu-shi Toyama Japan

Magnesium-based batteries are potential candidates for next-generation rechargeable batteries due to the divalent nature of magnesium cations and the natural abundance of magnesium resources. In this study, the electrochemical activity of Mg-6mass%Al-3mass%Ca anodes combined with Sn was investigated. Thin ribbons of the anode specimens were prepared by a single-roll rapid solidification method. The results showed that the electrochemical activity increased upon adding 1 mass% Sn, while it decreased for 3 mass% Sn. Based on the results of an X-ray diffraction analysis, the addition of Sn led to the formation of Mg2Sn and Ca2Sn phases, which increased the lattice distortion. Scanning electron microscopy observations indicated that these secondary phases were homogeneously distributed for 1 mass% Sn addition, while they were coarsely distributed for 3 mass% Sn. © 2025 The Japan Institute of Light Metals.

关键词： X ray diffraction analysis

来源：评论

学校读者我要写书评

暂无评论

Inverse Hall-Petch effect in nanocrystalline ice predicted by machine-learned coarse-grained molecular simulations

引用

Journal of Micromechanics and Molecular Physics 2023年第1期8卷 1-10页

作者： Chen, Guang Tao, Lei Kröger, Martin Li, Ying Department of Mechanical Engineering University of Connecticut Storrs 06269 CT United States Department of Materials Polymer Physics Eth Zürich Zürich CH-8093 Switzerland Department of Mechanical Engineering Institute of Materials Science University of Connecticut Storrs 06269 CT United States Polymer Program Institute of Materials Science University of Connecticut Storrs 06269 CT United States

We study the grain-size effect on mechanical behaviors of polycrystalline ice at nanoscale through large-scale molecular dynamics simulations, enabled by an accurate and efficient machine-learned coarse-grained water model [H. Chan, M. J. Cherukara, B. Narayanan, T. D. Loeffler, C. Benmore, S. K. Gray and S. K. Sankaranarayanan. Machine learning coarse grained models for water. Nature Communications 10(1), p. 379, 2019]. Polycrystalline ice systems with different grain sizes in the range of 5∼30 nm are systematically investigated through uniaxial tensile tests. Simulation results reveal that Young's modulus and yield strength increase as the grain size increases, leading to an inverse Hall-Petch effect in nanocrystalline ice. Such an observation is significantly different from the conventional Hall-Petch effect in polycrystalline ice observed by experiments at millimeter scale. The deformation behavior suggests that grain boundaries (GBs), rather than grain interiors, play the active role in accommodating external loading in nanocrystalline ice. Further void analysis of nanocrystalline ice during deformation reveals that nanocrack initiates and propagates along GBs and eventually leads to failure of systems with larger grain sizes (≥20nm), yielding a sudden drop in the stress-strain curve. While for systems with smaller grain sizes (≤15nm), only extensive plastic deformation is presented without significant void growth. Our simulation results demonstrate that the GB sliding is the governing mechanism for the inverse Hall-Petch effect observed in nanocrystalline ice. © 2023 World Scientific Publishing Company.

关键词： grain boundary inverse Hall-Petch effect molecular dynamics simulation Polycrystalline ice water model

来源：评论

学校读者我要写书评

暂无评论

Advances in powder nano-photocatalysts as pollutant removal and as emerging contaminants in water:Analysis of pros and cons on health and environment

Advanced Powder Materials

引用

Advanced Powder materials 2024年第6期3卷 33-69页

作者： Sahil Thakur Abhijeet Ojha Sushil Kumar Kansal Navneet Kumar Gupta Hendrik C.Swart Junghyun Cho Andrej Kuznetsov Shuhui Sun Jai Prakash Department of Chemistry National Institute of Technology HamirpurHamirpur(H.P.)177005India Department of Materials Science and Engineering National Institute of Technology HamirpurHamirpur(H.P.)177005India Dr.S.S.Bhatnagar University Institute of Chemical Engineering and Technology Panjab UniversityChandigarh 160014India Center for Sustainable Technologies Indian Institute of Science(IISc)Gulmohar MargMathikereBengaluru 560012India Department of Physics University of the Free State(UFS)BloemfonteinZA 9300South Africa Department of Mechanical Engineering&Materials Science and Engineering Program State University of New York(SUNY)BinghamtonNY 13902-6000USA University of Oslo Department of Physics and Centre for Materials Science and NanotechnologyPO Box 1048 BlindernN-0316OsloNorway Institut National de la Recherche Scientifique(INRS)-CentreEnergie Materiaux et Telecommunications VarennesQuebec J3X 1P7Canada

Photocatalysis is an advanced oxidation process where light exposure triggers a semiconducting nanomaterial(nano-photocatalyst)to generate electron-hole(e^(-)/h^(+))pairs and free *** phenomenon is widely used for the photocatalysis-assisted removal of organic and other contaminants using wide range of nanophotocatalysts,offering an efficient approach to environmental ***,the introduction of powdered nano-photocatalysts into water systems often leads to unintended secondary pollution in the form of residual nano-photocatalysts,ion leaching,free radicals,toxic by-products *** practices potentially introduce emerging secondary contaminants into aquatic environments,posing risks to both aquatic life and human *** resulting chemical by-products and intermediates can effectively induce chronic toxicity,neurological and developmental disorders,cardiovascular defects,and intestinal ailments in humans and aquatic *** having a range of health and environmental consequences,this dark side of nano-photocatalysts has been comparatively less explored and discussed in the *** this review,the pros and cons of powder nanophotocatalysts are discussed in view of their advantages as well as disadvantages in wastewater *** discussion encompasses their classification based on composition,dimensions,structure,and activity,as well as recent advancements in improving their photocatalytic *** article also explores the recent advances on their applications in photocatalytic removal of various water pollutants/contaminants of emerging concern(i.e.,organic pollutants,micro/nano plastics,heavy ions,disinfections,etc.)Furthermore,an emphasis on the role of such nano-photocatalysts as emerging(secondary)contaminants in water system,along with a thorough discussion of latest studies related to the health and environmental issues,has been ***,it addresses critical issues in applying powder nano-photo

关键词： Powder nano-photocatalysts Advanced oxidation processes Wastewater treatment Pros and cons Emerging contaminants Health and environment issues

来源：评论

学校读者我要写书评

暂无评论

Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces

引用

Smart materials in Medicine 2024年第1期5卷 127-139页

作者： Dargusch, Matthew S. Soro, Nicolas Demir, Ali Gokhan Venezuela, Jeffrey Sun, Qiang Wang, Yuan Abdal-hay, Abdalla Alali, Aya Q. Ivanovski, Saso Previtali, Barbara Kent, Damon School of Mechanical and Mining Engineering The University of Queensland Advanced Engineering Building Bld 49 Staff House Rd St LuciaQLD4072 Australia Department of Mechanical Engineering Politecnico di Milano Via La Masa 1 Milan20156 Italy School of Dentistry The University of Queensland Herston Campus 4072 Australia Department of Engineering Materials and Mechanical Design Faculty of Engineering South Valley University Qena83523 Egypt Faculty of Industry and Energy Technology Mechatronics Technology Program New Cairo Technological University New Cairo - Fifth Settlement Cairo11835 Egypt School of Science Technology and Engineering University of the Sunshine Coast Maroochydore BCQLD4558 Australia

Additively manufactured lattices based on triply periodic minimal surfaces (TPMS) have attracted significant research interest from the medical industry due to their good mechanical and biomorphic properties. However, most studies have focussed on permanent metallic implants, while very little work has been undertaken on manufacturing biodegradable metal lattices. In this study, the mechanical properties and in vitro corrosion of selective laser melted Fe–35%Mn lattices based on gyroid, diamond and Schwarz primitive unit-cells were comprehensively evaluated to investigate the relationships between lattice type and implant performance. The gyroid-based lattices were the most readily processable scaffold design for controllable porosity and matching the CAD design. mechanical properties were influenced by lattice geometry and pore volume. The Schwarz lattices were stronger and stiffer than other designs with the 42% porosity scaffold exhibiting the highest combination of strength and ductility, while diamond and gyroid based scaffolds had lower strength and stiffness and were more plastically compliant. The corrosion behaviour was strongly influenced by porosity, and moderately influenced by geometry and geometry-porosity interaction. At 60% porosity, the diamond lattice displayed the highest degradation rate due to an inherently high surface area-to-volume ratio. The biodegradable Fe–35Mn porous scaffolds showed a good cytocompatibility to primary human osteoblasts cells. Additive manufacturing of biodegradable Fe–Mn alloys employing TPMS lattice designs is a viable approach to optimise and customise the mechanical properties and degradation response of resorbable implants toward specific clinical applications for hard tissue orthopaedic repair. © 2023 The Authors

关键词： Porosity

来源：评论

学校读者我要写书评

暂无评论

Photocatalytic bio-inspired PDA-RGO/g-C3N4 nanocomposite incorporated PES membrane for removal of environmental antibiotic pollutants

引用

Journal of Chemical Technology and Biotechnology 2024年第6期99卷 1401-1413页

作者： Govardhanan, B. GokulaKrishnan, S.A. Arthanareeswaran, G. Ashok, M. Chen, Yong-Song Taweepreda, W. Membrane Research Laboratory Department of Chemical Engineering National Institute of Technology Tiruchirappalli Tiruchirappalli India New Generation Materials lab Department of Physics National Institute of Technology Tiruchirappalli Tiruchirappalli India Department of Mechanical Engineering and Advanced Institute of Manufacturing with High-tech Innovations National Chung Cheng University Chiayi County Taiwan Polymer Science Program Division of Physical Science Faculty of Science Prince of Songkla University Hat-Yai Thailand

BACKGROUND: Membrane technology makes it more suitable for the treatment of environmental polluted organic wastewater. Membrane fouling is one of the major concerns in commercial membranes. To overcome this issue, photocatalytic nanomaterials are embedded into the membrane to enhance its surface nature and reusability. In this investigation, polydopamine functionalized graphene oxide (PDA-RGO), graphite carbon nitride (g-C3N4) and PDA-RGO/g-C3N4 nanomaterials were incorporated within polyethersulfone membrane fabricated via a phase inversion technique. These as-prepared membranes’ functional groups and surface morphologies were investigated by Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM) and field emission electron microscopy (FESEM). These as-prepared membranes were investigated for photocatalytic activity under visible-light-driven photodegradation by environmental pollutants such as Rhodamine B (RhB) and Norfloxacin (NOR). RESULTS: Compared with pristine PES membrane, the PDA-RGO/g-C3N4-PES nanocomposite membrane showed higher photocatalytic activity for Rhodamine B 94.6% and Norfloxacin 96.8%, also reached greater water flux 189 L m−2 h−1. Therefore, the bio-inspired nanocomposite-modified PDA-RGO/g-C3N4 photocatalytic membrane could have huge potential in processing environmentally polluted water. CONCLUSIONS: PDA-RGO/g-C3N4-PES nanocomposite membrane improved the membrane hydrophilicity, water flow, anti-fouling performance, rejection studies and photocatalytic degradation than the pristine membrane. The synergistic result of PDA-RGO and g-C3N4 exhibits better photodegradation efficiency of the membrane towards environmental pollutants. © 2024 Society of Chemical Industry (SCI). © 2024 Society of Chemical Industry (SCI).

关键词： Nanocomposites

来源：评论

学校读者我要写书评

暂无评论

Evaluation of temperature dependent vortex pinning properties in strongly pinned YBa_(2)Cu_(3)O_(7-δ)thin films with Y_(2)BaCuO_(5)nanoinclusions

引用

Superconductivity 2024年第1期9卷 95-105页

作者： Alok K.Jha Kaname Matsumoto Tomoya Horide Shrikant Saini Ataru Ichinose Paolo Mele Yutaka Yoshida Satoshi Awaji Department of Materials Science and Engineering Kyushu Institute of TechnologyTobata-kuKitakyushu 804-8550Japan Department of Mechanical and Control Engineering Kyushu Institute of TechnologyTobata-kuKitakyushu 804-8550Japan Central Research Institute of Electrical Power Industry YokosukaKanagawa 240-0196Japan College of Engineering-Innovative Global Program Shibaura Institute of TechnologyMinuma-kuSaitama 337-8570Japan Department of Energy Engineering and Science Nagoya UniversityChikusa-kuNagoya 464-8603Japan Institute for Materials Research Tohoku UniversityAoba-kuSendai 980-8577Japan

The pinning of quantized magnetic vortices in superconducting YBa_(2)Cu_(3)O_(7-δ)(YBCO or Y123)thin films with Y_(2)BaCuO_(5)(Y211)nanoinclusions have been investigated over wide temperature range(4.2-77 K).The concentration of Y211 nanoinclusions has been systematically varied inside YBCO thin films prepared by laser ablation technique using surface modified target *** pinning force density values(Fp∼0.5 TNm^(−3)at 4.2 K,9 T)have been observed for the YBCO film with moderate concentration of Y211 nanoinclusions(3.6 area%on ablation target).In addition,uniform enhancement in critical current density(J_(c))was observed in the angular dependent J_(c)measurement of YBCO+Y211 nanocomposite films.Y211 nanoinclusions have been found to be very efficient in pinning the quantized vortices thereby enhancing the in‐field J_(c)values over a wide range of *** the concentration of Y211 secondary phase into Y123 film matrix results into agglomeration of Y211 phase and observed as increased Y211 nanoparticle *** larger secondary phase nanoparticles are not as efficient pinning centers at lower temperatures as they are at higher temperatures due to substantial reduction of the coherence length at lower *** of the temperature dependence of J_(c)for YBCO+Y211 nanocomposite films has been conducted and possible vortex pinning mechanism in these nanocomposite films has been discussed.

关键词： YBCO thin film Critical current Vortex pinning Nanoscale APCs

来源：评论

学校读者我要写书评

暂无评论

Design of the Continuous Gravity-Driven Multiple-Effect Thermal System (G-METS) for Efficient Low-Cost Magnesium Recycling

Design of the Continuous Gravity-Driven Multiple-Effect Ther...

引用

Magnesium Technology Symposium held during the 152nd TMS Annual Meeting and Exhibition, TMS 2023

作者： Sehar, Daniel Mcarthur Espinosa, Gabriel Telgerafchi, Armaghan Ehsani Chinwego, Chinenye Lynch, Keira Perrin, Benjamin Powell, Adam Materials Science and Engineering Program Department of Mechanical Engineering Worcester Polytechnic Institute WorcesterMA United States Department of Mechanical Engineering Worcester Polytechnic Institute WorcesterMA United States 100 Institute Rd WorcesterMA01609 United States

ISBN: (纸本)9783031226458

Recent global supply shortages, combined with need for light-weight structural components for efficient transportation, have led to very high prices for magnesium due to its low density and high part stiffness/weight. This study continues prior work on magnesium recycling using multiple-effect distillation with gravity as the parameter to create the pressure difference between effects, called G-METS. The long-term vision is for continuous distillation, but experiments to date have only used batch distillers with maximum rate of 1 kg/h. and minimum energy consumption of 2 kWh/kg. This study presents the design of laboratory-scale continuous distiller including a custom-made furnace to sustain a high-power density and temperature gradient for rapid boiling and efficient recovery of magnesium. © The Minerals, Metals & materials Society 2023.

关键词： Distillation

来源：评论

学校读者我要写书评

暂无评论

Fluorine-Free Cosolvent Chemistry Empowering Sodium-Sulfurized Polyacrylonitrile Batteries

引用

Advanced Energy materials 2025年第0期

作者： Pai, Min-Hao Manthiram, Arumugam Materials Science and Engineering Program & Walker Department of Mechanical Engineering The University of Texas at Austin AustinTX78712 United States

Localized high-concentration electrolytes (LHCE) show great promise for room-temperature sodium-sulfur batteries. However, the majority of diluents in LHCE systems consist of fluorinated ethers, which are not only dense and expensive but also demonstrate poor reductive stability with sodium metal. Herein, a low-density, non-fluorinated ether electrolyte is presented that demonstrates localized high-concentration behavior. This feature is driven by the weak solvating capabilities of 1,2-dimethoxypropane (DMP) and the ultra-weak solvating nature of cyclopentyl methyl ether (CPME). Impressively, the fluorine-free CPME cosolvent acts as a diluent within the electrolyte. Therefore, the electrolyte achieves a tailored solvation structure characterized by anion-rich species, which fosters the development of a resilient inorganic-rich SEI with superior Na-ion transport. Consequently, with a high sulfur-content sulfurized polyacrylonitrile (SPAN, S content > 45% in SPAN) loading of 4.4 mg cm⁻2 (sulfur loading: 2 mg cm⁻2) and a low electrolyte-to-SPAN ratio of 9 µL mg⁻¹ (E/SPAN = 9), the Na-SPAN cell demonstrates remarkable reversibility of 530 mA h gsulfur⁻¹ after 200 cycles at C/5 rate. This performance surpasses the majority of state-of-the-art Na-SPAN ether-based electrolyte systems reported to date. Hence, this work presents a novel approach for designing cost-effective, high-performance electrolytes for stable, practical Na-SPAN batteries. © 2025 Wiley-VCH GmbH.

关键词： Sodium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：