检索结果-内蒙古大学图书馆

Enhanced oxidation and overheating resistance of the extruded Mg–Zn–Al–Mn magnesium alloy by Calcium addition

Journal of Magnesium and Alloys 2023年第4期11卷 1276-1291页

作者： Hanieh Yeganeh Ahmad Bahmani Mehrab Lotfpour Mehdi Malekan Masoud Emamy Behzad Nayebi Kwang Seon Shin School of Metallurgy and Materials Engineering College of EngineeringUniversity of TehranP.O.Box 11155-4563TehranIran Department of Advanced Materials and Renewable Energies Iranian Research Organization for Science and TechnologyTehranIran Department of Mechanical Engineering University of NevadaRenoRenoNV 89557USA Advanced Research and Technology of Magnesium(ARTofMag)Co. TehranIran Research Institute of Advanced Materials School of Materials Science and EngineeringSeoul National UniversityGwanak-guSeoul 08826Republic of Korea

The effects of Ca addition on the microstructure and oxidation properties of a new Mg alloy were *** oxidation behavior of the alloys was analyzed by thermal analysis and material characterization of the alloys exposed in flame environment;and both electrical and induction ***,the surface layers were characterized using field emission scanning electron microscopy,and X-ray diffraction *** was found that increasing the Ca addition reduces the grain size and increases the fraction of the secondary phases,and enhances the mechanical ***,increasing the Ca contents resulted in the formation of a dense CaO/MgO layer on the surface prohibited the oxygen diffusion and assisted in protection of the substrate against further ***,ignition temperature was increased from 680℃ to 890℃ after addition of the Ca *** mechanical properties and ignition behavior of the current materials was compared with the literature which it showed an excellent combination of the properties in the developed alloys.

关键词： Mg alloys Oxidation properties Ca addition Microstructure Intermetallic phases

来源：评论

学校读者我要写书评

暂无评论

Study of dual pulse gas metal arc welding process characteristics on IS 2062 steel

引用

materials Today: Proceedings 2023年 72卷 2957-2964页

作者： Arunkumar, M. Aneesh Kumar, P. Sampreeth, S. Panicker, Sudhy S. Department of Mechanical Engineering NSS College of Engineering Kerala Palakkad 678008 India Department of Metallurgical and Materials Engineering Indian Institute of Technology Kharagpur West Bengal 721302 India Department of Mechanical Engineering Adi Shankara Institute of Engineering and Technology Kerala Kalady 683574 India Department of Mechanical Engineering Birla Institute of Technology & Science Pilani-K K Birla Goa Campus Zuarinagar South Goa-403726 Goa India

Dual pulse gas metal arc welding (DP-GMAW) is a superior welding process where the weld quality and strength of weldment is highly dependent on weld input parameters. It is important to understand the effect of different input parameters on the effectiveness of welding, especially for commonly used mild steels such as IS 2062. This work attempts to study the effect of current, voltage, wire feed rate (WFR) and standoff distance (SOD) during DP-GMAW of IS 2062 steels. The interaction of WFR and varying welding current, voltage, weld pool geometry and %dilution was investigated through bead-on-plate weld method. A plate was welded using DP-GMAW process with a WFR of 8 m/min, SOD of 15 mm and a travel speed of 25 cm/min. The side and face bend tests of DP-GMA welded plates revealed that the weld quality was good without any crack. The hardness of the weld zone was significantly higher than the base metal. The strength, elongation and Charpy V-notch impact energy of the weldment was comparable to that of the base metal. A simultaneous increase of microhardness and toughness of the welded sample was observed. Metallographic tests revealed that this phenomenon was due to the presence of fine grain structure containing acicular ferrite and Widmanstatten ferrite in the weld metal which was generated due to the superimposition of current pulsation over thermal pulsation during DP-GMAW process. © 2023

关键词： Welds

来源：评论

学校读者我要写书评

暂无评论

Characterization of Wood, Leaves, Barks, and pod wastes from Prosopis africana biomass for biofuel production

Waste Management Bulletin

引用

Waste Management Bulletin 2024年第3期2卷 172-182页

作者： Uzoagba, Chidiebele E.J. Okoroigwe, Edmund Kadivar, Marzieh Anye, Vitalis C. Bello, Abdulhakeem Ezealigo, Uchechukwu Odette Ngasoh, Fayen Pereira, Helena Azikiwe Onwualu, Peter Materials Science and Engineering Department African University of Science and Technology (AUST) Abuja Nigeria Mechanical Engineering Department University of Nigeria Nsukka Nigeria Materials Science and Engineering Department University of Sao Paulo Brazil Theoretical and Applied Physics Department African University of Science and Technology Abuja Nigeria Department of Natural Resources Environment and Territory University of Lisbon Portugal

One of the approaches for increasing the contribution of biomass to the renewable energy mix is the valorization of biomass to bioenergy. Evaluating the potential of unconventional biomass sources could significantly accelerate the assessment for suitability as feedstock for bioenergy production as a sustainable solution. The study aimed to characterize the Prosopis africana biomass of wood, barks, leaves, and pods towards providing valuable data for scaling up and incorporating these materials into the bioenergy crop database. Characterizations of wood, leaves, barks, and pod wastes from Prosopis africana biomass were investigated based on the proximate, ultimate, and compositional analysis of pulverized samples of the PA biomass to determine their physical, thermal, and chemical properties towards assessing their potential for valorization to bioenergy. The lignocellulosic materials were characterized by scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction. The results show that the pulverized sample wastes have porous structures with varying degrees of crystallinity (wood: 89.20 %, bark: 23.90 %, leaves: 32.48 %, pods: 23.08 %), suggesting different susceptibilities to conversion processes. Notably, the wood sample had the lowest moisture content (3.13 %), and the pod sample had the highest volatile matter content (75.83 %), indicating a high potential for biofuel production. The higher heating values (HHV) and lower heating values (LHV) of the samples ranged from 15.23 to 20.49 MJ/kg and 13.83 to 18.79 MJ/kg, respectively. These calorific values are competitive with established lignocellulosic bioenergy feedstocks, positioning PA biomass as promising candidates for solid biofuel applications. © 2024 The Authors

关键词： Biofuel Biomass Characterization Lignocellulosic feedstocks Prosopis africana Valorization

来源：评论

学校读者我要写书评

暂无评论

Transferable,highly crystalline covellite membrane for multifunctional thermoelectric systems

引用

InfoMat 2024年第11期6卷 66-80页

作者： Myungwoo Choi Geonhee Lee Yea-Lee Lee Hyejeong Lee Jin-Hoon Yang Hanhwi Jang Hyeonseok Han MinSoung Kang Seonggwang Yoo A-Rang Jang Yong Suk Oh Inkyu Park Min-Wook Oh Hosun Shin Seokwoo Jeon Jeong-O Lee Donghwi Cho Department of Materials Science and Engineering Korea UniversitySeoulRepublic of Korea Thin Film Materials Research Center Korea Research Institute of Chemical TechnologyDaejeonRepublic of Korea Chemical Data-Driven Research Center Korea Research Institute of Chemical TechnologyDaejeonRepublic of Korea Division of Chemical and Material Metrology Korea Research Institute of Standards and ScienceDaejeonRepublic of Korea Department of Materials Science and Engineering Korea Advanced Institute of Science and TechnologyDaejeonRepublic of Korea Department of Mechanical Engineering Korea Advanced Institute of Science and TechnologyDaejeonRepublic of Korea Therapeutics&Biotechnology Division Drug Discovery Platform Research CenterKorea Research Institute of Chemical TechnologyDaejeonRepublic of Korea Querry Simpson Institute for Bioelectronics Northwestern UniversityEvanstonIllinoisUSA Division of Electrical Electronic and Control EngineeringKongju National UniversityCheonanRepublic of Korea Department of Mechanical Engineering Changwon National UniversityChangwonRepublic of Korea Department of Materials Science and Engineering Hanbat National UniversityDaejeonRepublic of Korea Advanced Materials and Chemical Engineering University of Science and TechnologyDaejeonRepublic of Korea

Emerging freestanding membrane technologies,especially using inorganic thermoelectric materials,demonstrate the potential for advanced thermoelectric ***,using rare and toxic elements during material processing must be ***,we present a scalable method for synthesizing highly crystalline CuS membranes for thermoelectric *** sulfurizing crystalline Cu,we produce a highly percolated and easily transferable network of submicron CuS *** CuS membrane effectively separates thermal and electrical properties to achieve a power factor of 0.50 mW m^(-1) K^(-2) and thermal conductivity of 0.37 W m^(-1) K^(-1) at 650 K(estimated value).This yields a record-high dimensionless figure-of-merit of 0.91 at 650 K(estimated value)for ***,integrating 12 CuS devices into a module resulted in a power generation of4μW atΔT of 40 K despite using a straightforward configuration with only p-type ***,based on the temperature-dependent electrical characteristics of CuS,we develop a wearable temperature sensor with antibacterial properties.

关键词： copper sulfide flexible thermoelectric generator multifunctional thermoelectric systems sulfurization thermoelectric membrane

来源：评论

学校读者我要写书评

暂无评论

Frontiers in high entropy alloys and high entropy functional materials

引用

Rare Metals 2024年第10期43卷 4639-4776页

作者： Wen-Tao Zhang Xue-Qian Wang Feng-Qi Zhang Xiao-Ya Cui Bing-Bing Fan Jia-Ming Guo Zhi-Min Guo Rui Huang Wen Huang Xu-Bo Li Meng-Ru Li Yan Ma Zhi-Hua Shen Yong-Gang Sun De-Zhuang Wang Fei-Yang Wang Li-Qiang Wang Nan Wang Tian-Li Wang Wei Wang Xiao-Yang Wang Yi-Han Wang Fu-Jie Yu Yu-Zhen Yin Ling-Kun Zhang Yi Zhang Jian-Yang Zhang Qi Zhao Yu-Ping Zhao Xin-Dong Zhu Yasir Sohail Ya-Nan Chen Tao Feng Qi-Long Gao Hai-Yan He Yong-Jiang Huang Zeng-Bao Jiao Hua Ji Yao Jiang Qiang Li Xiao-Ming Li Wei-Bing Liao Huai-Jun Lin Hui Liu Qi Liu Qing-Feng Liu Wei-Di Liu Xiong-Jun Liu Yang Lu Yi-Ping Lu Wen Ma Xue-Fei Miao Jie Pan Qing Wang Hong-Hui Wu Yuan Wu Tao Yang Wei-Ming Yang Qian Yu Jin-Yu Zhang Zhi-Gang Chen Liang Mao Yang Ren Bao-Long Shen Xun-Li Wang Zhe Jia He Zhu Zhen-Duo Wu Si Lan School of Materials Science and Engineering Nanjing University of Science and TechnologyNanjing 210094China Jiangsu Key Laboratory for Advanced Metallic Materials School of Materials Science and EngineeringSoutheast UniversityNanjing 211189China Department of Physics City University of Hong KongHongKong 999077China School of Materials Science and Engineering Tianjin UniversityTianjin 300072China School of Physics and Microelectronics Zhengzhou UniversityZhengzhou 450001China Department of Mechanical Engineering Research Institute for Advanced ManufacturingThe Hong Kong Polytechnic UniversityHong Kong 100872China Center of Electron Microscopy and State Key Laboratory of Silicon Materials School of Materials Science and EngineeringZhejiang UniversityHangzhou 310027China Key Laboratory of Solidification Control and Digital Preparation Technology(Liaoning Province) School of Materials Science and EngineeringDalian University of TechnologyDalian 116024China Institute of Advanced Wear&Corrosion Resistance and Functional Materials Jinan UniversityGuangzhou 510632China School of Mechanics and Civil Engineering China University of Mining and TechnologyXuzhou 221116China School of Physical Sciences Great Bay UniversityDongguan 523000China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical EngineeringNanjing Tech UniversityNanjing 211816China Beijing Advanced Innovation Center for Materials Genome Engineering Research Institute for Carbon NeutralityUniversity of Science and Technology BeijingBeijing 100083China Department of Mechanical Engineering The University of Hong KongHong Kong 999077China School of Computing Macquarie UniversitySydney 2113Australia Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province College of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen 518060China State Key Laborato

Owing to their exceptional properties,high-entropy alloys(HEAs)and high-entropy materials have emerged as promising research areas and shown diverse ***,the recent advances in the field are comprehensively reviewed,organized into five *** first section introduces the background of HEAs,covering their definition,significance,application prospects,basic properties,design principles,and *** subsequent section focuses on cutting-edge high-entropy structural materials,highlighting developments such as nanostructured alloys,grain boundary engineering,eutectic systems,cryogenic alloys,thin films,micro-nano-lattice structures,additive manufacturing,high entropy metallic glasses,nano-precipitate strengthened alloys,composition modulation,alloy fibers,and refractory *** the following section,the emphasis shifts to functional materials,exploring HEAs as catalysts,magneto-caloric materials,corrosion-resistant alloys,radiation-resistant alloys,hydrogen storage systems,and materials for ***,the review encompasses functional high-entropy materials outside the realm of alloys,including thermoelectric,quantum dots,nanooxide catalysts,energy storage materials,negative thermal expansion ceramics,and high-entropy wave absorption *** paper concludes with an outlook,discussing future directions and potential growth areas in the *** this comprehensive review,researchers,engineers,and scientists may gain valuable insights into the recent progress and opportunities for further exploration in the exciting domains of high-entropy alloys and functional materials.

关键词： High entropy alloys Cutting-edge structural materials Cutting-edgefunctional materials

来源：评论

学校读者我要写书评

暂无评论

Real-Time Tunable Gas Sensing Platform Based on SnO_(2) Nanoparticles Activated by Blue Micro-Light-Emitting Diodes

引用

Nano-Micro Letters 2024年第12期16卷 103-119页

作者： Gi Baek Nam Jung-El Ryu Tae Hoon Eom Seung Ju Kim Jun Min Suh Seungmin Lee Sungkyun Choi Cheon Woo Moon Seon Ju Park Soo Min Lee Byungsoo Kim Sung Hyuk Park Jin Wook Yang Sangjin Min Sohyeon Park Sung Hwan Cho Hyuk Jin Kim Sang Eon Jun Tae Hyung Lee Yeong Jae Kim Jae Young Kim Young Joon Hong Jong-In Shim Hyung-Gi Byun Yongjo Park Inkyu Park Sang-Wan Ryu Ho Won Jang Department of Materials Science and Engineering Seoul National UniversitySeoul 08826Republic of Korea Research Laboratory of Electronics Department of Mechanical EngineeringMassachusetts Institute of TechnologyCambridgeMA 02139USA Ming Hsieh Department of Electrical and Computer Engineering University of Southern CaliforniaLos AngelesCA 90089USA Department of Display Materials Engineering Soonchunhyang UniversityAsan 31538Republic of Korea Department of Photonics and Nanoelectronics BK21 FOUR ERICA-ACE CenterHanyang University ERICAAnsan 15588Republic of Korea Department of Nanotechnology and Advanced Materials Engineering Sejong UniversitySeoul 05006Republic of Korea Department of Electronics Information and Communication EngineeringKangwon National UniversitySamcheok 25913Republic of Korea Advance Institute of Convergence Technology Seoul National UniversitySuwon 16229Republic of Korea Department of Mechanical Engineering Korea Advanced Institute of Science and TechnologyDaejeon 34141Republic of Korea Department of Physics Chonnam National UniversityGwangju 500-757Republic of Korea

Micro-light-emitting diodes(μLEDs)have gained significant interest as an activation source for gas sensors owing to their advantages,including room temperature operation and low power ***,despite these benefits,challenges still exist such as a limited range of detectable gases and slow *** this study,we present a blueμLED-integrated light-activated gas sensor array based on SnO_(2)nanoparticles(NPs)that exhibit excellent sensitivity,tunable selectivity,and rapid detection with micro-watt level power *** optimal power forμLED is observed at the highest gas response,supported by finite-difference time-domain ***,we first report the visible light-activated selective detection of reducing gases using noble metal-decorated SnO_(2)*** noble metals induce catalytic interaction with reducing gases,clearly distinguishing NH3,H2,and ***-time gas monitoring based on a fully hardwareimplemented light-activated sensing array was demonstrated,opening up new avenues for advancements in light-activated electronic nose technologies.

关键词： Micro-LED Gas sensor array Low power consumption Metal decoration Real-time detection

来源：评论

学校读者我要写书评

暂无评论

Detoxification of impurity elements in recycled aluminum alloys using vertical-type high-speed twin-roll casting and remaining problems for upgrade recycling

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2023年第9期73卷 470-480页

作者： Harada, Yohei Kumai, Shinji Division of Mechanical Engineering School of Science and Engineering Tokyo Denki University Ishizaka Hatoyama-machi Saitama Hiki-gun350-0394 Japan Department of Materials Science and Engineering Tokyo Institute of Technology Meguro-ku Tokyo Japan

来源：评论

学校读者我要写书评

暂无评论

Solidification modes and delta-ferrite of two types of 316L stainless steels:a combination of as-cast microstructure and HT-CLSM research

引用

Journal of Iron and Steel Research International 2025年第2期32卷 426-436页

作者： Yang Wang Chao Chen Xiao-yu Yang Zheng-rui Zhang Jian Wang Zhou Li Lei Chen Wang-zhong Mu College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024ShanxiChina Department of Materials Science and Engineering KTH Royal Institute of TechnologyStockholm 10044Sweden College of Artificial Intelligence and Big Data for Medical Sciences Shandong First Medical University and Shandong Academy of Medical SciencesJinan 250117ShandongChina College of Mechanical Engineering Taiyuan University of TechnologyTaiyuan 030024ShanxiChina Key Laboratory of Electromagnetic Processing of Materials(Ministry of Education) Northeastern UniversityShenyang 110819LiaoningChina

In 316L austenitic stainless steel,the presence of ferrite phase severely affects the non-magnetic properties.316L austenitic stainless steel with low-alloy type(L-316L)and high-alloy type(H-316L)has been *** microstructure and solidification kinetics of the two as-cast grades were in situ observed by high temperature confocal laser scanning microscopy(HT-CLSM).There are significant differences in the as-cast microstructures of the two 316L stainless steel *** L-316L steel,ferrite morphology appears as the short rods with a ferrite content of 6.98%,forming a dual-phase microstructure consisting of austenite and ***,in H-316L steel,the ferrite appears as discontinuous network structures with a content of 4.41%,forming a microstructure composed of austenite and sigma(σ)*** alloying elements in H-316L steel exhibit a complex distribution,with Ni and Mo enriching at the austenite grain ***-CLSM experiments provide the real-time observation of the solidification processes of both 316L specimens and reveal distinct solidification modes:L-316L steel solidifies in an FA mode,whereas H-316L steel solidifies in an AF *** differences result in ferrite and austenite predominantly serving as the nucleation and growth phases,*** solidification mode observed by experiments is similar to the thermodynamic calculation *** L-316L steel solidified in the FA mode and showed minimal element segregation,which lead to a direct transformation of ferrite to austenite phase(δ→γ)during phase transformation after ***,the H-316L steel solidified in the AF mode and showed severe element segregation,which lead to Mo enrichment at grain boundaries and transformation of ferrite into sigma and austenite phases through the eutectoid reaction(δ→σ+γ).

关键词： 316L austenitic stainless steel As-cast microstructure High-temperature confocal laser scanning microscopy Solidification mode Ferrite Characterization

来源：评论

学校读者我要写书评

暂无评论

From VIB‑to VB‑Group Transition Metal Disulfides:Structure engineering Modulation for Superior Electromagnetic Wave Absorption

引用

Nano-Micro Letters 2024年第2期16卷 218-257页

作者： Junye Cheng Yongheng Jin Jinghan Zhao Qi Jing Bailong Gu Jialiang Wei Shenghui Yi Mingming Li Wanli Nie Qinghua Qin Deqing Zhang Guangping Zheng Renchao Che Department of Materials Science Shenzhen MSU-BIT UniversityShenzhen 517182People’s Republic of China School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081People’s Republic of China School of Materials Science and Engineering Qiqihar UniversityQiqihar 161006People’s Republic of China Department of Mechanical Engineering Hong Kong Polytechnic UniversityHung HomKowloonHong KongPeople’s Republic of China Laboratory of Advanced Materials Shanghai Key Lab of Molecular Catalysis and Innovative MaterialsFudan UniversityShanghai 200438People’s Republic of China Zhejiang Laboratory Hangzhou 311100People’s Republic of China

The laminated transition metal disulfides(TMDs),which are well known as typical two-dimensional(2D)semiconductive materials,possess a unique layered structure,leading to their wide-spread applications in various fields,such as catalysis,energy storage,sensing,*** recent years,a lot of research work on TMDs based functional materials in the fields of electromagnetic wave absorption(EMA)has been carried ***,it is of great significance to elaborate the influence of TMDs on EMA in time to speed up the *** this review,recent advances in the development of electromagnetic wave(EMW)absorbers based on TMDs,ranging from the VIB group to the VB group are *** compositions,microstructures,electronic properties,and synthesis methods are presented in ***,the modulation of structure engineering from the aspects of heterostructures,defects,morphologies and phases are systematically summarized,focusing on optimizing impedance matching and increasing dielectric and magnetic losses in the EMA materials with tunable EMW absorption *** as well as the challenges are also identified to guide the design of new TMDs based dielectric EMA materials with high performance.

关键词： Transition metal disulfides Electromagnetic wave absorption Impedance matching Structure engineering modulation

来源：评论

学校读者我要写书评

暂无评论

WE43 Surface Composite with Oxide Particles by Friction Stir Processing

WE43 Surface Composite with Oxide Particles by Friction Stir...

引用

Magnesium Technology Symposium, 2025, held as part of the TMS Annual Meeting and Exhibition, TMS 2025

作者： Ghauri, Hamza Faisal Shunmugasamy, Vasanth C. Mansoor, Bilal Department of Materials Science and Engineering Texas A&M University College StationTX77840 United States Mechanical Engineering Program Texas A&M University at Qatar Doha Qatar Department of Mechanical Engineering Texas A&M University College StationTX77840 United States

ISBN: (纸本)9783031810602

WE43WE43 has superior mechanical and corrosionCorrosion performance compared to other magnesium alloysMagnesium alloy but surface treatments, mechanical processes, and heat treatments to further enhance its properties continue to be explored. Here we present our preliminary findings about a WE43WE43surface compositeSurface composite with oxide particles produced using friction stir processingFriction stir processing. Significant grain refinement, precipitate redistribution, and increase in microhardness by 25% were achieved in processed regions compared to base material. CorrosionCorrosion testing in 0.9% NaCl solution revealed that the FSP-treated material exhibited a 196% lower Icorr and a more stable open circuit potential (OCP) than cast WE43WE43, suggesting superior corrosion resistanceCorrosion resistance. While the findings promise suitability of the processed alloy for a more intensive range of operating conditions than the cast alloy, further work to study the effect of the size, volume, and composition of the oxide reinforcements needs to be carried out. © The Minerals, Metals & materials Society 2025.

关键词： Grain refinement

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：