检索结果-内蒙古大学图书馆

The effect of the addition of alumina on the viscosity, surface tension, and foaming efficiency of 2.5(CaO/SiO2)-xAl2O3-yFeO-MgO melts

引用

Ceramics International 2023年第13期49卷 21994-22003页

作者： Chang, Yu-En Lin, Chi-Ming Shen, Jyun-Ming Luo, Shao-Feng Yu, Kai-Wen Wu, Weite Department of Materials Science and Engineering National Chung Hsing University 145 Xingda Rd South Dist Taichung City40227 Taiwan WEI CHIH STEEL INDUSTRIAL CO. LTD No.123 Nanbu Guantian Dist. Tainan City720006 Taiwan Academy of Circular Economy Industrial and Intelligent Technology Program National Chung Hsing University No. 15 Guangming Rd. Nantou County 540 Taiwan

Viscosity and surface tension strongly influence the efficiency of slag foam in metallurgical processes. An excellent foaming slag preserves heat and lowers the cost of smelting in an electric furnace. In this study, we investigated the viscosity, surface tension, and foaming efficiency of a 2.5CaO/SiO2-xAl2O3-yFeO-MgO slag. We also investigated the different valence oxygen ions by X-ray photoelectron spectroscopy (XPS). The results showed that with a gradual increase in the content of Al2O3, the viscosity initially increased and then decreased, and the changes in surface tension followed a similar pattern. The change in viscosity was caused by the increase in the degree of polymerization of the slag, which was determined by the competitive relationship between polymerization and the reduction in the stability of the overall network structure. Adding a small amount of Al2O3 to the slag slightly increased the number of Al–O–Al structures, whereas adding a large amount of the Al2O3 led to the formation of low-strength Al–O–Si structures, which reduced the stability of the network structure, thus reducing the viscosity. Because the surface tension is related to the concentration of non-bridging oxygens (NBOs), when the NBO content increased, the instability of the surface structure caused an increase in energy, thus increasing the surface tension. In addition, the CaO–SiO2–5MgO-xAl2O3-yFeO five-element oxide in this study had the lowest surface tension at the same NBO concentration, which positively contributed to slag foaming. Finally, When the Al2O3 content in the system increased from 5.1 to 15.7 wt%, the foaming efficiency increased from 24.2 to 69.2 (minute‧centimeters), an increase of 286%. © 2023 Elsevier Ltd and Techna Group S.r.l.

关键词： Silica

来源：评论

学校读者我要写书评

暂无评论

PVA-based bioinks for 3D bioprinting: A comprehensive review of their applications in tissue engineering

引用

Bioprinting 2025年 49卷

作者： Johari, Narges Adabavazeh, Zary Baino, Francesco Materials Engineering Group Golpayegan College of Engineering Isfahan University of Technology Golpayegan Iran Ph.D. Program Graduate Institute of Precision Manufacturing National Chin-Yi University of Technology Taichung Taiwan Institute of Materials Physics and Engineering Department of Applied Science and Technology Politecnico di Torino Torino Italy

3D bioprinting is an innovative approach that overcomes the limitations of traditional methods for creating cell-laden biomaterials and constructs. It allows for the fabrication of complex and biologically active tissue structures. This review aims to provide a comprehensive evaluation of polyvinyl alcohol (PVA)-based bioinks within a 3D bioprinting framework. PVA-based bioinks exhibit remarkable properties, such as biocompatibility, biodegradability, and the ability to enhance cell growth and differentiation. These properties make them appropriate for many tissue engineering applications. The study evaluates the physicochemical and biological properties of PVA bioinks, including how they combine with other materials such as gelatin, chitin, chitosan, alginate, agarose, cellulose, κ-carrageenan, methacrylate, nanoparticles, mineral additives, carbon nanotubes, graphene oxide, and extracellular matrix components. Furthermore, this review evaluates the benefits of market availability and enhanced printing resolution, in addition to the challenges posed by complexity, dependency on support baths, and the risk of contamination. The objective of this review is to draw attention to the capabilities of PVA-based bioinks and provide guidelines for future research to improve the effectiveness of these materials in tissue engineering and regenerative medicine. © 2025 The Authors

关键词： Bioink Bioprinting Polyvinyl alcohol PVA-based bioinks

来源：评论

学校读者我要写书评

暂无评论

Strong Interlayer Coupling and Long-Lived Interlayer Excitons in Two-Dimensional Perovskite Derivatives and Transition Metal Dichalcogenides van der Waals Heterostructures

SSRN

引用

SSRN 2023年

作者： Liang, Jia Ai, Qing Wen, Xiewen Tang, Xiuyu Zhai, Tianshu Xu, Rui Zhang, Xiang Fang, Qiyi Nguyen, Christine Liu, Yifeng Zhu, Hanyu Terlier, Tanguy Wiederrecht, Gary P. Ajayan, Pulickel M. Qian, Xiaofeng Lou, Jun Department of Materials Science and NanoEngineering Rice University HoustonTX United States Department of Materials Science Fudan University Shanghai China Center for Nanoscale Materials Argonne National Laboratory LemontIL United States Department of Materials Science and Engineering Texas A&M University College StationTX United States Department of Physics and Astronomy Texas A&M University College StationTX United States Department of Electrical and Computer Engineering Texas A&M University College StationTX United States Shared Equipment Authority SIMS laboratory Rice University HoustonTX United States Rice University United States

Two-dimensional (2D) van der Waals (vdW) heterostructures offer new platforms for exploring novel physics and diverse applications ranging from electronics and photonics to optoelectronics at the nanoscale. The studies to date have largely focused on transition-metal dichalcogenides (TMDCs) based samples prepared by mechanical exfoliation method, therefore it is of significant interests to study high-quality vdW heterostructures using novel materials prepared by a versatile method. Here, we report a two-step vapor phase growth process for the creation of high-quality vdW heterostructures based on perovskites and TMDCs, such as 2D Cs3Bi2I9/MoSe2, with a large lattice mismatch. Supported by experimental and theoretical investigations, we discover that the Cs3Bi2I9/MoSe2 vdW heterostructure possesses hybrid band alignments consisting of type-I and type-II heterojunctions because of the existence of defect energy levels in Cs3Bi2I9. More importantly, we demonstrate that the type-II heterojunction in the Cs3Bi2I9/MoSe2 vdW heterostructure not only shows a higher interlayer exciton density, but also exhibits a longer interlayer exciton lifetime than traditional 2D TMDCs based type-II heterostructures. We attribute this phenomenon to the reduced overlap of electron and hole wavefunctions caused by the large lattice mismatch. Our work demonstrates that it is possible to directly grow high-quality vdW heterostructures based on entirely different materials which provide promising platforms for exploring novel physics and cutting-edge applications, such as optoelectronics, valleytronics, and high-temperature superfluidity. © 2023, The Authors. All rights reserved.

关键词： Perovskite

来源：评论

学校读者我要写书评

暂无评论

The Effects of Calcium Carbonate on Sodium Metasilicate-Activated Metakaolin-Based Geopolymer Pastes

SSRN

引用

SSRN 2024年

作者： Ren, Jie Acarturk, B. Cansu Dowdy, Nicolas D. Srubar, Wil V. College of Civil Engineering Department of Civil Environmental and Architectural Engineering University of Colorado Boulder 1111 Engineering Drive ECOT 441 UCB 428 BoulderCO80309 United States Materials Science and Engineering Program University of Colorado Boulder 4001 Discovery Drive BoulderCO80303 United States

The influence of calcium carbonate (CaCO3) on the alkali-activation kinetics, microstructure, and compressive strength of alkali-activated metakaolin (MK) geopolymer cements was investigated herein. Experimental results showed that replacing 10-50% of MK with ground CaCO3 particles delayed the acceleration stage of alkali-activation regardless of replacement amount. However, 10% CaCO3 replacement increased the overall degree of reaction and yielded pastes with similar 14- and 28-day compressive strengths compared to the experimental control with no CaCO3 addition. In comparison, 50% CaCO3 replacement led to a lower overall degree of reaction and lower compressive strengths through 28 days of curing. Experimental evidence substantiates that N-A-S-H gel forms in samples containing 0% and 10% CaCO3, while N-(C)-A-S-H gel and/or C-(N)-A-S-H are also present in the binding matrix near CaCO3 particles in samples with higher CaCO3 contents (i.e., 30% and 50%). While the CaCO3 particles were primarily composed of calcite, vaterite, a less stable form of CaCO3, was also evident in the samples containing 30% and 50%, suggesting that the CaCO3 particles were moderately reactive during the alkali-activation. © 2024, The Authors. All rights reserved.

关键词： Calcium carbonate

来源：评论

学校读者我要写书评

暂无评论

Chiral, Topological, and Knotted Colloids in Liquid Crystals

arXiv

引用

arXiv 2024年

作者： Yuan, Ye Smalyukh, Ivan I. Hiroshima University Hiroshima Higashi-Hiroshima739-8526 Japan Department of Physics Department of Electrical Computer and Energy Engineering Materials Science and Engineering Program Soft Materials Research Center University of Colorado BoulderCO80309 United States Renewable and Sustainable Energy Institute National Renewable Energy Laboratory University of Colorado BoulderCO80309 United States

The geometric shape, symmetry, and topology of colloidal particles often allow for controlling colloidal phase behavior and physical properties of these soft matter systems. In liquid crystalline dispersions, colloidal particles with low symmetry and nontrivial topology of surface confinement are of particular interest, including surfaces shaped as handlebodies, spirals, knots, multi-component links, and so on. These types of colloidal surfaces induce topologically nontrivial three-dimensional director field configurations and topological defects. Director switching by electric fields, laser tweezing of defects, and local photo-thermal melting of the liquid crystal host medium promote transformations among many stable and metastable particle-induced director configurations that can be revealed by means of direct label-free three-dimensional nonlinear optical imaging. The interplay between topologies of colloidal surfaces, director fields, and defects is found to show a number of unexpected features, such as knotting and linking of line defects, often uniquely arising from the nonpolar nature of the nematic director field. This review article highlights fascinating examples of new physical behavior arising from the interplay of nematic molecular order and both chiral symmetry and topology of colloidal inclusions within the nematic host. Furthermore, the article concludes with a brief discussion of how these findings may lay the groundwork for new types of topology-dictated self-assembly in soft condensed matter leading to novel mesostructured composite materials, as well as for experimental insights into the pure-math aspects of low-dimensional topology. © 2024, CC BY.

关键词： Crystal symmetry

来源：评论

学校读者我要写书评

暂无评论

Effects of carbon dioxide concentration and swine wastewater on the cultivation of Chlorella vulgaris FSP-E and bioethanol production from microalgae biomass

引用

Applied Energy 2024年 369卷

作者： Condor, Billriz E. de Luna, Mark Daniel G. Lacson, Carl Francis Z. Acebu, Paula Isabel G. Abarca, Ralf Ruffel M. Nagarajan, Dillirani Lee, Duu-Jong Chang, Jo-Shu Energy Engineering Program National Graduate School of Engineering University of the Philippines Diliman Quezon City Philippines Quezon City1101 Philippines Department of Chemical Engineering University of the Philippines Diliman Quezon City1101 Philippines Center of Excellence in Environmental Catalysis and Adsorption Thammasat University Pathum Thani12121 Thailand Department of Chemical Engineering and Technology Mindanao State University-Iligan Institute of Technology Iligan City9200 Philippines College of Hydrosphere Science Institute of Aquatic Science and Technology National Kaohsiung University of Science and Technology Kaohsiung City811532 Taiwan Department of Mechanical Engineering City University of Hong Kong Kowloon Tang Hong Kong Department of Chemical and Materials Engineering Tunghai University 407 Taiwan Research Center for Smart Sustainable Circular Economy Tunghai University Taichung407 Taiwan Department of Chemical Engineering National Cheng Kung University Tainan701 Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University Chung-Li Taiwan

The study investigated the potential of wastewater-derived microalgae as a cost-effective feedstock for bioethanol production. The influence of CO2 loading, use of swine wastewater as a nutrient source, effect of micronutrients in the cultivation media, and scale-up of Chlorella vulgaris FSP-E was conducted. Results showed that 2% CO2, 25% swine wastewater, 500 mg/L sodium nitrate, 40 mg/L K2HPO4, 75 mg/L MgSO4, and 6 mg/L citric acid were optimal for maximal biomass production, nitrate removal, and carbohydrate accumulation in BG-11 medium. The maximum biomass and carbohydrate content obtained in this study were 35-fold and 60%, respectively. Scaling up to 5 L volume was challenging due to illumination, aeration, and mixing issues. The obtained carbohydrate-rich biomass was subjected to mild sulfuric acid hydrolysis and subsequently used for bioethanol fermentation. The hydrolysate was composed solely of glucose and galactose and was converted into bioethanol within 8 h by Saccharomyces cerevisiae with an ethanol yield of 0.22 ± 0.01 g ethanol per g biomass. Further exploration of effective lighting and mixing strategies are recommended to realize economically viable microalgal biofuels. © 2024 Elsevier Ltd

关键词： Biomass

来源：评论

学校读者我要写书评

暂无评论

Optical Control of Adaptive Nanoscale Domain Networks

arXiv

引用

arXiv 2024年

作者： Zajac, Marc Zhou, Tao Yang, Tiannan Das, Sujit Cao, Yue Guzelturk, Burak Stoica, Vladimir Cherukara, Mathew Freeland, John W. Gopalan, Venkatraman Ramesh, Ramamoorthy Martin, Lane W. Chen, Long-Qing Holt, Martin Hruszkewycz, Stephan Wen, Haidan Advanced Photon Source Argonne National Laboratory LemontIL60439 United States Center for Nanoscale Materials Argonne National Laboratory LemontIL60439 United States Department of Materials Science and Engineering Pennsylvania State University University Park PA16802 United States Materials Sciences Division Lawrence Berkeley National Laboratory BerkeleyCA94720 United States Materials Science Division Argonne National Laboratory LemontIL60439 United States Department of Materials Science and NanoEngineering Rice University HoustonTX77005 United States Department of Physics and Astronomy Rice University HoustonTX77005 United States Rice Advanced Materials Institute Rice University HoustonTX77005 United States Department of Chemistry Rice University HoustonTX77005 United States

Adaptive networks can sense and adjust to dynamic environments to optimize their performance. Understanding their nanoscale responses to external stimuli is essential for applications in nanodevices and neuromorphic computing. However, it is challenging to image such responses on the nanoscale with crystallographic sensitivity. Here, the evolution of nanodomain networks in (PbTiO3)n/(SrTiO3)n superlattices was directly visualized in real space as the system adapts to ultrafast repetitive optical excitations that emulate controlled neural inputs. The adaptive response allows the system to explore a wealth of metastable states that were previously inaccessible. Their reconfiguration and competition were quantitatively measured by scanning x-ray nanodiffraction as a function of the number of applied pulses, in which crystallographic characteristics were quantitatively assessed by assorted diffraction patterns using unsupervised machine-learning methods. The corresponding domain boundaries and their connectivity were drastically altered by light, holding promise for light-programmable nanocircuits in analogy to neuroplasticity. Phase-field simulations elucidate that the reconfiguration of the domain networks is a result of the interplay between photocarriers and transient lattice temperature. The demonstrated optical control scheme and the uncovered nanoscopic insights open opportunities for remote control of adaptive nanoscale domain networks. © 2024, CC BY.

关键词： Strontium titanates

来源：评论

学校读者我要写书评

暂无评论

A Rapid Manual Solid Phase Peptide Synthesis Method for High-Throughput Peptide Production

引用

Journal of Biomedical materials Research - Part A 2025年第5期113卷 e37922页

作者： Overby, Clyde Abraham, Brittany Adjei-Sowah, Emmanuella March, Alyson Ling, Kevin Basu, Sayantani Benoit, Danielle S. W. Department of Biomedical Engineering University of Rochester RochesterNY United States Center for Musculoskeletal Research University of Rochester RochesterNY United States Department of Chemical Engineering University of Rochester RochesterNY United States Materials Science Program University of Rochester RochesterNY United States Department of Bioengineering Knight Campus for Accelerating Scientific Impact University of Oregon EugeneOR United States

Solid phase peptide synthesis (SPPS) techniques are critical for developing and using peptides in various biomedical applications. However, typical synthesis routes used in SPPS are either resource-intensive (e.g., with automated synthesis or commercial services) or time-consuming (e.g., with manual benchtop synthesis). Here, a rapid manual synthesis method was developed to produce up to 8 peptides with fast cycle times simultaneously. Peptides synthesized manually were of equivalent or superior quality to those produced by in-house microwave-assisted automated peptide synthesis, with higher average crude purity of 70% compared to 50%. The method significantly reduced synthesis time, enabling the parallel coupling of up to 8 amino acids simultaneously in 15–20 min, as opposed to traditional benchtop peptide synthesis, which requires 80–150 min per amino acid. This approach offers an intermediate throughput between milligram-scale libraries and gram-scale single peptide synthesis, enabling rapid iteration for novel peptide designs without the need for expensive automated systems. As a result, peptide modifications, including incorporation of unnatural amino acids, can be explored, accelerating the development of peptides for a wide range of applications. © 2025 The Author(s). Journal of Biomedical materials Research Part A published by Wiley Periodicals LLC.

关键词： Medical applications

来源：评论

学校读者我要写书评

暂无评论

Hidden domain boundary dynamics towards crystalline perfection

arXiv

引用

arXiv 2024年

作者： Mangu, A. Stoica, V.A. Zheng, H. Yang, T. Zhang, M. Wang, H. Nguyen, Q.L. Song, S. Das, S. Meisenheimer, P. Donoway, E. Chollet, M. Sun, Y. Turner, J.J. Freeland, J.W. Wen, H. Martin, L.W. Chen, L.-Q. Gopalan, V. Zhu, D. Cao, Y. Lindenberg, Aaron M. Department of Materials Science and Engineering Stanford University StanfordCA94305 United States Stanford Institute for Materials and Energy Sciences SLAC National Accelerator Laboratory Menlo ParkCA94025 United States Department of Materials Science and Engineering Pennsylvania State University University ParkPA16802 United States Advanced Photon Source Argonne National Laboratory LemontIL60439 United States Materials Science Division Argonne National Laboratory LemontIL60439 United States Linac Coherent Light Source SLAC National Accelerator Laboratory Menlo ParkCA94025 United States Materials Sciences Division Lawrence Berkeley National Laboratory BerkeleyCA94720 United States Department of Materials Science and Engineering University of California Berkeley BerkeleyCA94720 United States Materials Research Centre Indian Institute of Science Karnataka Bangalore560012 India Department of Physics University of California Berkeley BerkeleyCA94720 United States Departments of Materials Science and NanoEngineering Chemistry and Physics and Astronomy The Rice Advanced Materials Institute Rice University Houston77005 United States Stanford PULSE Institute SLAC National Accelerator Laboratory Menlo ParkCA94025 United States

A central paradigm of non-equilibrium physics concerns the dynamics of heterogeneity and disorder, impacting processes ranging from the behavior of glasses to the emergent functionality of active matter. Understanding these complex mesoscopic systems requires probing the microscopic trajectories associated with irreversible processes, the role of fluctuations and entropy growth, and the timescales on which non-equilibrium responses are ultimately maintained. Approaches that illuminate these processes in model systems may enable a more general understanding of other heterogeneous non-equilibrium phenomena, and potentially define ultimate speed and energy cost limits for information processing technologies. Here, we apply ultrafast single shot x-ray photon correlation spectroscopy to resolve the non-equilibrium, heterogeneous, and irreversible mesoscale dynamics during a light-induced phase transition. This approach defines a new way of capturing the nucleation of the induced phase, the formation of transient mesoscale defects at the boundaries of the nuclei, and the eventual annihilation of these defects, even in systems with complex polarization topologies. A non-equilibrium response spanning >10 orders of magnitude in timescales is observed, with multistep behavior similar to the plateaus observed in supercooled liquids and glasses. We show how the observed time-dependent long-time correlations can be understood in terms of the stochastic dynamics of domain walls, encoded in effective waiting-time distributions with power-law tails. This work defines new possibilities for probing the non-equilibrium and correlated dynamics of disordered and heterogeneous media. Copyright © 2024, The Authors. All rights reserved.

关键词： Glass

来源：评论

学校读者我要写书评

暂无评论

The Effects of Calcium Carbonate on Sodium Metasilicate-Activated Metakaolin-Based Geopolymer Pastes

SSRN

引用

SSRN 2024年

作者： Ren, Jie Dowdy, Nicolas D. Acarturk, B. Cansu Srubar, Wil V. Department of Civil Environmental and Architectural Engineering University of Colorado Boulder 1111 Engineering Drive ECOT 441 UCB 428 BoulderCO80309 United States Materials Science and Engineering Program University of Colorado Boulder 4001 Discovery Drive BoulderCO80303 United States College of Civil Engineering

关键词： Calcium carbonate

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：